Cable Tenders

Details: Excavation, construction of cable trenches, earthing system, foundations, floor slab, masonry work, reinforced concrete work

Details: The construction concerns the shaft and cable laying between Stockholm Water and Waste Plant in Hammarbybacken and up to Textilgatan via Heliosgå...

Details: This procurement concerns excavation work in connection with the laying of electric cables, the installation of cable cabinets and the replacement of street lighting at Doktorsvägen, Lagm...

Details: The Procurement Includes Connections, Disconnections, Maintenance Work, Surveying, Shafting, Welding, Cable Relocation, Signage Work (e.g. Signage Of Leadni...

Details: Request For Information (rfi): Usgs Equipment Maintenance And Repair Services For Ott Hydromet Equipmentthe Us Geological Survey (usgs) Needs To Assess Industry Interest And Capabilities For Assisting The Usgs, Hydrologic Instrumentation Facility (hif) In Tuscaloosa, Al In Obtaining Equipment Maintenance And Repair Services For Ott Hydromet Equipment.in Accordance With Federal Acquisition Regulation (far) 52.215-3, Request For Information For Solicitation And Planning Purposes (october 1997) And 10.002(b)2)(i), This Notice Is Issued Solely For Information, Planning And Market Research Purposes. This Request For Information (rfi) Does Not Constitute A Solicitation Or An Indication The Government Will Contract For The Products Or Services Contained In This Notice. This Notice Is Not To Be Construed As An Acquisition Request For Proposal (rfp) Or Request For Quotation (rfq). The Government Does Not Intend To Award A Contract On The Basis Of This Solicitation Or To Otherwise Pay For The Information Solicited Except As An Allowable Cost Under Other Contracts As Provided In Subsection 31.205-18, Bid And Proposal Costs, Of The Federal Acquisition Regulation. Although "proposal" And "offeror" Are Used In This Request For Information, Your Response Will Be Treated As Information Only. It Shall Not Be Used As A Proposal Or Quote. Please Ensure That Any Sensitive Or Protected Information Is Marked As Such And The Government Will Ensure This Information Is Not Released Externally.rfi Requirements:this Solicitation Is Issued For The Purpose Of Obtaining Capability Statements From Interested Parties That Can Provide Equipment Maintenance And Repair Services For Ott Hydromet Brand Equipment. The Equipment Includes: - Submersible And Non-submersible Pressure Sensors- Bubbler Systems- Radar Sensors- Rain Gages- Temperature Sensors- Encoders- Data Loggers- Goes Data Collection Platforms- Sdi-12 Radios Devices- Cables And Interfaces it Is Anticipated That Maintenance And Repair Services Would, At A Minimum, Include The Following Tasks:- Visual Inspection And Basic Functional Checks- Diagnostic Testing And Evaluation- Troubleshooting For Proper Operation- Electronic Component And/or Circuit Board Replacement- Removal, Replacement, And Functional Testing Of Component Parts- Mechanical Component Repair Or Replacement- Sensor Evaluation And Testing- Sensor Replacement- Sensor Factory Calibration- Performing Tests, Or Checks, As Required To Verify Proper Operation- Inspection, Evaluation, Testing, And Repair Of Cables- Functional Testing Of Related Equipment Software- Performing Software Upgrades- Cleaning Of Equipment, As Neededit Is Expected That Delivered Repair Products (following Maintenance/repair Services) Perform And Operate In Accordance With Equipment Manufacturer Specifications, And Where Applicable, Usgs Specifications For Measurement Accuracy. Repair Products Shall Also Be Covered Under A Repair Warranty.the Usgs Is Searching For Small Business Concerns, I.e., 8(a) Businesses, Hubzone Businesses, Small-disadvantaged Businesses, Woman-owned Small Businesses, Veteran-owned Small Businesses Or Service-disable Veteran Owned Small Businesses Capable Of Providing The Described Products Or Services. Large Businesses Are Also Encouraged To Respond To This Rfi. The Usgs Is Also Requesting Confirmation Whether The Requested Products/services Can Be Obtained Through Any Existing Gsa Schedule Contracts Or Through Open Market Means. The Resultant Contract, If There Is Such, Is Anticipated To Be Firm Fixed Price. The Procurement Is Anticipated To Occur In Fy25. Action: Interested Vendors Who Believe They Have The Capability To Provide The Required Product/services As Defined Are Invited To Submit A Capability Statement, Not To Exceed 15 Pages Including Attachments, Exhibits, Etc. Response Should Include The Following Information: 1. Company Name, Sam Uei, Address, Point Of Contact, Email Address, And Business Type (i.e. 8(a), Hubzone, Veteran-owned Small Business, Etc.). 2. Gsa Schedule Contract Information If Applicable3. Capabilities Statement4. Past Performance Information Should Be Submitted For Similar Projects Conducted Within The Last Three (3) Years. If Possible, Three (3) Past Performance Examples Are Desired. Interested Vendors Must Provide Their Response Via Email To The Contracting Specialist Jean Walsh At Jwalsh@usgs.gov With The Subject Line Reading "rfi - Usgs Ott Equipment Maintenance And Repair Services". Responses Are Due Via Email To Jwalsh@usgs.gov By 8:00 Am Et, Tuesday, January 7, 2025. The Response Must Be Specific To The Rfi Requirements/qualifications Listed Above.no Feedback Or Evaluations Will Be Provided Regarding The Information Provided.

Details: Description The City Of Bayawan, Through Its Bids And Awards Committee (bac), Invites Suppliers / Manufacturers /distributors / Contractors To Bid For The Hereunder Projects: Item No.qtyunitarticlesbrandunitpricetotallot No. Iaggregates13cu.m.sand, Washed Mixing/screened Non Washed24cu.m.crushed Gravel, (screened & Washed), Max. Size 38mm Dialot No. Iibar And Rebar390lengthdeformed Bars, · 10mm X 6m420lengthangle Bar, 3mm X 38mm X 38mm X 6m Lot No. Iiibatteries, Cells And Accessories530unitlithium Ion Battery, · Capacity : 100 Ah· Dc Output Voltage: 12 V· Chemistry: Lithium Ion· Enclosure: Abs Plastic· Max Charge Voltage: 14.6±0.1v· Life Cycles :3,000 @ 80% Dod· Water Rating: Water Resistant· Warranty: 1 Yearlot No. Ivcarpentry Tools And Supplies65packcutting Disc, 4" (100mm), For Metal, Slim, 50pcs/pack710piecehacksaw Blade, · 24 Tpi· 12”x1/2”860piecebolt With Nut, · 13mm X 8”· With Nut And Washer92kilotie Wire, #18 G.i Wire101sheetphenolic Board, 16mm X 4' X 8 Lot No. Vcement And Additives1130bagcement, · Pozzolan· 40 Kg/baglot No. Viflood Rescue Equipment Invitation To Bid Republic Of The Philippinesprovince Of Negros Orientalcity Of Bayawanbids And Awards Committeebid No.:itb-24-318date.:11.dec.2024geps Publication:geps December 17, 2024newspaper:none Item No.qtyunitarticlesbrandunitpricetotal1230unitmppt Solar Charge Controller, · System Nominal Voltage 12 /24/36/48vdc Auto· Battery Type Lithium / Lead-acid· Charging Technology Mppt· Maximum Charging Current 40a· Maximum Discharge Current 40a· Max Pv Input Power 130w12v/260w 24v· Max.pv Open Circuit Voltage 100v Lot No. Viiinformation And Communication Technology Equipment, Devices And Accessories1319unitwifi Radio, Mechanical· Dimensions 512 X 385.8 X 258.3 Mm (20.2 X 15.2 X 10.2")· Enclosure Material Aluminum, Plastic· Mounting Pole Mount (kit Included)· Wind Loading 550 N At 200 Km/h (123.6 Lbf At 125 Mph)hardware· Networking Interface (1) Gbe Rj45 Port· Power Supply 24v, 0.3a Gigabit Poe Adapter (included)· Max. Power Consumption 7w· Leds Power, Ethernet· Operating Frequency (mhz) 5150-5875 Mhz143boxrj-45 Connector, 3 Box· 100 Pcs/box· Pass Thru155boxutp Cable, Outdoor, Cat6, 23 Awg, Inner Jacket: Pvc, Outer Jacket: Pe, Insulation: Polythelene, 305 Meters/box1615unitwifi Adapter With Rs485 Interface, 15 Units· Hf22111720piecesolar Panel, · Maximum Power/pmax(w)：120w· Open-circuit Voltage/voc(v)：22.32· Max Power Voltage/vmp(v)：18· Max Power Current/lmp(a)：6.67· Weight(kg)：7.6· Dimension(mm)：1126*666*35· Max System Voltage(v)：600lot No. Viiimeasuring/observing/testing Devices Invitation To Bid Republic Of The Philippinesprovince Of Negros Orientalcity Of Bayawanbids And Awards Committeebid No.:itb-24-318date.:11.dec.2024geps Publication:geps December 17, 2024newspaper:none Item No.qtyunitarticlesbrandunitpricetotal185unitwater Level Sensor, · Certification: Ce· Application: Water, Fuel Level Sensor· Measuring Range:0-60m· Output Signal:4-20ma/hart· Accuracy:0.5%fs, 1%fs· Power Supply:24vdc· Output:4-20 Ma Liquid Ultrasonic· Type: Ultrasonic Level Transmitter1910unitautomated Weather Station, · Style : Display Version 3· Batteries: 4 Aa Batteries Required.· Assembly Required : No· Batteries Required? : Yes· Included Components : Digital Display With Pc Connect, 5-in-1 Weather Sensor, Usb Cable, Mounting Bracket, Mounting Hardware, Power Adapterlot No. Ixplumbing Supplies2050lengthgi Pipe, 50 Length· Schedule 40· 1 1/2” Diameter212lengthg.i Pipe, · 1 ¼” Dia. X 6m· Schedule 40lot No. Xsteel Sheets And Mesh221sheetsteel Plate, 6mm X 1.20m X 2.40m 235sheetsteel Plate, G.i., Gauge # 22 X 1.20m X 2.40mlot No. Xielectrical Supplies And Materials2410packcable Tie, M3 X 100 Mm2510rollelectrical Tape, Rubber 18mm X 5m Self Fusing Ethylene Propylene Rubber (roll) 265rollguy Wire, · # 12 G.i. Wire· 30 Kilos/roll27401pieceturn Buckle, 12mm X 0.20m (hook & Eye)*** Nothing Follows *** Bid Documents Shall Be Available At The Bac Office, New City Hall, Lgu Bayawan City Upon Payment Of Prescribed Non-refundable Fee In The Amount Of Php Bidders Shall Drop Their Technical And Financial Proposals In The Bid Box At The Bac Office, Bayawan City On Or Before The Deadline Of Submission Of Bids As Shown Below. All Particulars Relative To Eligibility Process, Opening And Evaluation Of Bids, Postqualification And Award Of Contract Shall Be Governed By The Applicable Provisions Of Ra. 9184. The City Of Bayawan Reserves The Right To Reject Any Or All Bids, To Waive Any Defects Or Formality Therein And To Accept Bids Considered Responsive And Most Advantageous To The Government. The Complete Schedule Of Activities Is Listed, As Follows: Basis Of Evaluationper Lotper Itemlot No.description Of Lottotal Abc Of Lotbid Securitycash/mc/bank Gurantee (2% Of Abc)1aggregates7,100.00142.002bar And Rebar40,100.00802.003batteries, Cells And Accessories750,000.0015,000.004carpentry Tools And Supplies21,940.00438.805cement And Additives9,000.00180.006flood Rescue Equipment240,000.004,800.007information And Communication Technology Equipment, Devices And Accessories494,000.009,880.008measuring/observing/testing Devices525,000.0010,500.009plumbing Supplies62,200.001,244.0010steel Sheets And Mesh24,100.00482.0011electrical Supplies And Materials61,105.001,222.101,000.00 Invitation To Bid Republic Of The Philippinesprovince Of Negros Orientalcity Of Bayawanbids And Awards Committee(035) 531-0020 Local 202(035) 430-0439 (telefax)email: Bac.bayawan@gmail.comhttp://www.bayawancity.gov.ph Activitiesscheduleissuance Of Bid Documents December 17, 2024 To January 6, 2025@ 5:00 P.m.pre-bid Conference December 26, 2024@ 9:00 Amdeadline/opening Of Bids January 7, 2025@ 9:00 Ampost Qualificationjanuary 14, 2025@ 9:00 Amawarding Of Bidsjanuary 21, 2025@ 9:00 Am Approved:virginia D. Sadiasa City Civil Registrar Bac Chairman

Details: Description 2 Unit Air-conditioning Unit (preferred American Homes W/ Installation) 135,800.00 2.5 Hp Split-type Wall Mounted Inverter With Temperature Control And Timer Excess Pipe 15meters 1 Unit Air-conditioning Unit (preferred American Homes W/ Installation) 39,900.00 2.5 Hp Window-type Inverter With Temperature Control And Timer 1 Unit Ph Meter W/ Calibration Cert. 49,500.00 230v (tablet Type) Includes Benchtop Docking Station With Electrode Holder Wall Mount Cradle, Usb Cable Hi11310 Glass Body Refillable Ph Electrode With Temperature Sensor Buffer Sachets Solution 5 Vdc Power Adapter 1 Unit Laboratory Refrigerator 32,495.00 Refrigerator With Freezer 415 L Volume Total(liter) 98 L Volume For Freezer(liter) 317 L Volume For Fridge(liter) No Frost Cooling Type With Deodorizer 1 Unit Fire Extinguisher 4,950.00 Abc Dry 20lbs 1 Unit Fire Extinguisher 15,000.00 Hcfc 123 20lbs 1 Unit Laboratory Digital Weighing Scale 27,000.00 Weighing Switching Function Included Operating Temperature Range: -10 To +40℃ Display Unit: Lcd Power Supply: D Dry Cell X 4 Pieces (included For Test) Size: 266 X 303 X 109mm Weighing Tray Size: 247 X 212mm Body Weight: 3.0kg Dustproof, Waterproof Protection: Ip69k Weighing (kg): 3/6 " Minimum Display (g): 1/2" " Powerful Waterproof Type" " Model Number: Fw500c-6" Package Size：330×430×190 Mm　3.6 Kg 1 Unit Microwave Oven 9,430.00 Capacity - 42l Dimension - 544 X 308 X 432 Main Technology Even Heating Additional Benefit Even Defrosting Capacity – 42 Liters Power Output 1200 W Microwave 1350 W Basic Specification Electricity Power 230v/50hz Easy Clean Coating (antibacterial) Turntable Size (mm) Φ360 Out Case Noble Silver Color Out Case Color Noble Silver Trim Of Door /keypad Controller Type Glass Touch Display White Led Door Open Type - Side Swing Function Clock Time Setting Child Lock Quick Start More/less Tastesaver Cooking/defrost Functions Reheat Soften Melt Proof & Warm Inverter Defrost Arabic Menu Weight(kg) Net 12.5 Packed 14.5 Dimension(w X H X D) 544 X 308 X 432 Packed 608 X 331 X 477 5 Unit Laboratory Gown 1,925.00 White ¾ Sleeve (sizes Xxl – Xl – L) 48 Unit T5 Led Tube Light 16,896.00 16w - Length 900mm 2 Unit Timer Switch 11,700.00 Timer Switch Mechanical Type- 10amps / 220v / Item No. : Sul181h / Sul181 D Operating Voltage : Ac 110v/220/240v 50-60hz Power Consumption : 2.5va Contace Capacity : Ac 220v 16a Contact Resistance : ≤50mω Inaulation Resistance : ≥100mω Operating Temperature : -10℃~+55℃ Accuracy : ≤2s/day 25℃ Contact Capacity Lamp Load:1000w Resistive Load:16a/250vac(cosφ=1) Inductive Load:3a/250vac(cosφ=0.6) Working Reserve Time : 150 Hours After Recharging 24 Hours Full Timing Range : 24h Storage Battery : 150h Minimum Setting Unit : 30 Minutes 100 Unit Pp Plastic Bags (clear) 400.00 9x12 Inches / Thickness 0.002 1 Unit Duplex Wire White #14 3,780.00 42 Unit Switch Dual Wall Mount 9,450.00 Switches 2gang 2way Switch Large Button Dimensions: 74mm(w) X 120mm(h) Mounting Center: 83.5mm Voltage: 250v Mode Of Application: Flush Type White 12 Unit Utility Box Surface Type 696.00 Iec Standards Poly Carbonate Plastic Color: White Philippine Standard Size For Electrical Outlets/switches 3 Unit Electrical Tape 174.00 0.16mm X 19mm X 4m 5 Unit Cable Tie Black 1,900.00 12 Inches 100pcs/pack 3 Meters Pdx Wire White #14 195.00 100 Meters Hose Pe 1/2 100meters 3,300.00 2 Unit Teflon Tape 3/4 96.00 3 Unit Pe T Pipe 1/2 357.00 3 Unit Pe Coupling 1/2 282.00 100 Unit Wood Screw 3/4 200.00 1 Lot Chemicals 97,248.00 1 Ptc Agar Agar (pronadisa) 1 Ammonium Nitrate 1 Benzyl Adenine (bap) 1 Boric Acid (ar, Hi Media Grm 575) 1 Ph Buffer Solution (ph 4) 1 Ph Buffer Solution (ph 7) 1 Calcium Chloride 1 Calcium Nitrate, Merck (1 Kg) 1 Cobalt Chloride 1 Copper Sulfate (ar, Hi Media Grm 1045) 1 Ferrous Sulfate 1 Gibberellic Acid – Laboratory Grade 1 Glycine 1 Iba – Laboratory Grade 1 Indole Acetic Acid (aa) – Laboratory Grade 1 Kinetin (1gram) 1 Magnesium Sulfate (ar, Ajax 302) 1 Manganese Sulfate 1 Myo-inositol 1 Naphthalene Acetic Acid (naa) – Laboratory Grade 1 Nicotinic Acid 1 Potassium Hydroxide (koh) 1 Potassium Iodide 1 Potassium Nitrate, Merck 1 Potassium Phosphate 1 Pyridoxine Hcl 1 Sodium Edta 1 Sodium Hydroxide 1 Sodium Molybdate 1 Thiamine Hcl 1 Tween 20 1 Zinc Sulfate 1 Iodine Crystals 1 Ki Powder 1 Etoh Alcohol 95% 1 Lot Other Consumables 8,170.00 2 Scalpel Blades #8 (boxes) 2 Scalpel Blades #10 (boxes) 5 Bleach 1000ml (bottle) 10 Cleaning And Disinfectant Liquid Bottle 500ml 5 Detergent Powder 1kg 20 Hand Bar Antibacterial White Soap 55g 3 Disposable Laboratory Gloves White (m - L – Xl) (assorted) 3 Hand Sprayer 1 Liter Capacity 5 Tissue Paper Roll 10 Rolls Per Pack 10 Wipes (boxes) 111.76 Mm X 213.36 Mm Wipes, 280 Wipes Per Box 5 Ordinary Rubber Band Round 100grams 6cm (boxes) Total 470,844.00

Description: Item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| inspection Of Supplies--fixed-price (aug 1996)|2||| inspection And Acceptance Of Supplies|26||||||||||||||||||||||||||| stop-work Order (aug 1989)|1|| wide Area Workflow Payment Instructions (jan 2023)|16|combo Receiving Report And Invoice|n/a|tbd|n00104|tbd|tbd|see Schedule|tbd|||tbd|||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|wss| value Engineering (jun 2020)|3|||| equal Opportunity (sep 2016)|2||| integrity Of Unit Prices (nov 2021)|1|| equal Opportunity For Veterans (jun 2020)|4||||| small Business Subcontracting Plan (sep 2023)|4||||| equal Opportunity For Workers With Disabilities (jun 2020)|2||| list Of Award Attachments|5|||||| alternate A, Annual Representations And Certifications (nov 2023)|13|||||||||||||| buy American-balance Of Payments Program Certificate-basic (feb 2024)|1|| annual Representations And Certifications (may 2024)|13|335931|600|||||||||||| type Of Contract (apr 1984)|1|ffp| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||x| the Purpose Of This Amendment Is To Increase Qty From 9 Ea To 13 Ea. no Other Changes Are Made At This Time. \ the Purpose Of This Amendment Is To Exend Proposal Due Date To 19 Feb 2025. all Other Terms And Conditions Remain Unchanged. \ the Purpose Of This Amendment Is To Extend Proposal Due Date To 20 Dec 2024. no Other Changes Are Made At This Time. \ please Provide Price As Firm-fixed Price With All Costs Associated With Production Or Procurement Of New Units. please Note, The Quote Must Agree To Government Source Inspection (gsi) And Commercial Asset Visibility (cav) Reporting. any Proposal From An Other-than-small Business With A Value Over $750,000.00 Must Include A Subcontracting Plan To Be Approved Prior To Being Considered Responsive. all Contractual Documents (i.e. Contracts, Purchase Orders, Task Orders, Delivery Orders, And Modifications) Related The Instant Procurement Are Considered Tobe "issued" By The Government When Copies Are Either Deposited In The Mail, Transmitted By Facsimile, Or sent By Other Electronic Commerce Methods, Such As Email. The Government's Acceptance Of The Contractor's Proposal Constitutes A Bilateral Agreement To "issue" Contractual Documents As Detailed Herein. poc: Amber Wale poc Tel: (717-605-2541) poc Email: Amber.l.wale.civ@us.navy.mil 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Manufacture And The Contract Quality Requirements For The Tow Cable,littoral . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 2.2 Order Of Precedence - In The Event Of A Conflict Between The Text Of This Contract/purchase Order And The References And/or Drawings Cited Herein, The Text Of This Contract/purchase Order Shall Take Precedence. Nothing In This Contract/purchase Order, however, Shall Supersede Applicable Laws And Regulations Unless A Specific Exemption Has Been Obtained. document Ref Data=mil-std-129 | | |r |190927|a| |03| document Ref Data=iso9001 | | | |010417|a| | | 3. Requirements 3.1 Cage Code/reference Number Items - The Tow Cable,littoral Furnished Under This contract/purchase Order Shall Be The Design Represented By Cage Code(s) reference Number(s). Cage _______ Ref. No. ;3b3g2 K939060500; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-129; . 3.3 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Spcc Contracting Officer Has Been Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Or A Detailed Description Of The Change, Explaining The Reason Therefore. If Finished Detail Drawings Are Not Available, Shop Drawings Inthe Form Used By The Manufacturer will Be Acceptable For Government Evaluation. When Notifying The Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Part Number Change/minor Design Change - If The Manufacturer's Part Number Or Item Design Indicated Thereon Has Changed, But Form, Fit And Function Of The Item Is Not Affected Thereby, And The Design Change Meets The Criteria For Minor, By Not effecting Form, Fit, Function, Reliability Or Safety , Supply The Item And Advise Spcc Immediately Of The New Part Number, Furnishing A Detail Drawing And/or A Detailed Description Of The Change, As Applicable. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts. code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New. code 6: Part Redesigned - Parts Not Interchangeable. 3.4 Mercury Free - The Material Supplied Under This Contract/purchase Order Is Intended For Use On Submarines/surface Ships And Therefore Shall Contain No Metallic Mercury And Shall Be Free From Mercury Contamination. Mercury Contamination Of The Material will Be Cause For Rejection. If The Inclusion Of Metallic Mercury Is Required As A Functional Part Of The Material Furnished Under This Contract, The Contractor Shall Obtain Written Approval From The Procurement Contracting Officer Before Proceeding With Manufacture. The contractor's Request Shall Explain In Detail The Requirements For Mercury, Identify Specifically The Parts To Contain Mercury, And Explain The Method Of Protection Against Mercury Escape. Such A Request Will Be Forwarded Directly To The Procurement Contracting officer With A Copy To The Applicable Government Inspector. Upon Approval By The Contracting Officer, The Vendor Will Provide A "warning Plate" Stating That Metallic Mercury Is A Functional Part Of The Item And Will Include Name And Location Of That Part. The Use Of Mercury, Mercury Compounds, Or Mercury-bearing Instruments And/or Equipment In A Manner Which Might Cause Contamination In The Manufacture, Assembly, Or Test Of Material On This Contract Is Prohibited. The Most Probable Causes Of contamination Are Direct-connected Manometers, Mercury Vacuum Pumps, Mercury Seals, Or The Handling Of Mercury In The Immediate Vicinity. Mercury Switches, Mercury In Glass Thermometers, Standard Cells And Other Items Containing Mercury May Be Used If They Are located So As Not To Constitute A Contamination Hazard. If External Contamination By Metallic Mercury Occurs Or Is Suspected, The Following Test May Be Used To Determine Whether Contamination By Metallic Mercury Exists Or Whether Corrective Cleaning Measures Have Been Effective. Enclose The Equipment In A polyethylene Bag Or Close-fitting Airtight Container For Eight Hours At Room Temperature (70 Degrees F Minimum).sample The Trapped Air And If Mercury Vapor Concentration Is 0.01 Mg/cu Meter Or More, The Material Is Mercury Contaminated Insofar As The requirements Of This Contract Are Concerned. These Requirements Shall Be Included In Any Subcontract Or Purchase Order Hereunder And The Contractor Shall Insure Subcontractor Compliance With These Requirements. Technical Questions Pertaining To These Requirements Shall Be Referred To The Procurement Contracting Officer Via The Cognizant Administrative Contracting Officer. For Background, The Following Information Is Provided: Mercury Is Corrosive To Gold, Silver, Nickel, Stainless Steels, Aluminum And Copper Alloys. Stainless Steels, Nickel, And Copper Alloys Are Widely Used In Reactor Plants And Other Submarine/surface Ship Systems. Accidental Trapping Of Mercury In A component Could Cause Serious Damage To Vital Parts. Mercury Is Also Toxic If Inhaled, Ingested, Or Absorbed Through The Skin. It Is Evident That Grave Consequences Could Result From Small Amounts Of Mercury Vapor Present In An Unreplenished Submarine/surface ship Atmosphere. 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Quality System Requirements - The Supplier Shall Provide And Maintain A Quality System Acceptable To The Government. The Quality System Requirements Shall Be In Accordance With Iso 9001. 4.2.1 ;suppliers Currently Using And Maintaining Inspection System Requirements To mil-i-45208 Are Granted Permission To Utilize Mil-i-45208 If Desired.; 4.3 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.4 Records Of Inspection - (this Requirement Is Not Applicable To Government Purchase Orders) Records Of All Inspection Work Performed By The Contractor, As Referenced Elsewhere In This Contract, Shall Be Kept Complete And Available To The Government During the Performance Of The Contract And For A Period Of Four Years After Final Delivery Of Supplies. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer. 6.2 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. 6.3 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss.

Description: Request For Information - Sources Sought naval Air Warfare Center, Aircraft Division Lakehurst, Nj rsd Depot Level Repair Facility - Request For Information/sources Sought (rfi) introduction: this Request For Information (rfi) Is Issued Pursuant To Far 15.201(e) And In Conformance With Dfars Pgi 206.302.this Is A Request For Information/sources Sought (rfi) Notice To Solicit Comments, Questions And Feedback From Industry Regarding Their Interest In And Capacity To Conduct A “depot Level” Repair/overhaul Of An Electro-hydraulic Device (rapid Securing Device (rsd)). The Rsd Is One Of The Main Assemblies Of A Us Navy Helicopter Landing System Called Recovery Assist, Securing, And Traversing (rast). The Rsd Is Installed On Multiple Us Navy Vessels And Is Used To Secure And Maneuver Military Helicopters On The Flight Deck. nawcad Lakehurst Is Requesting To Establish An Independent Overhaul Facility Which Will Supplement Existing Organic Repair/overhaul Capacity With The Capability To Refurbish Approximately 18-24 Rsds Per Year. The Repair/overhaul Involves Disassembly, Corrosion Control, Inspection And Testing Of Numerous Parts And Assemblies, Changeout Of Mandatory Parts, Reassembly, And Functional As Well As Load Testing. interested Parties May Submit Technical Literature/brochures On Solutions That Meet These Material Requirements. Any Relevant Information May Also Be Submitted For Consideration To Aid In Refinement Of This Requirement. this Rfi Is Not A Request For Proposal: it Is A Market Research Tool Being Used To Determine Potential And Eligible Vendors Capable Of Providing Services Described Herein Prior To Determining The Method Of Acquisition And Issuance Of A Request For Proposal. The Government Is Not Obligated To And Will Not Pay For Any Information Received From Potential Sources As A Result Of This Notice. eligibility: the Psc For This Requirement Is J017 (maintenance, Repair, And Rebuilding Of Equipment- Aircraft Launching, Landing, And Ground Handling Equipment). Naics Is 811310 (commercial And Industrial Machinery And Equipment (except Automotive And Electronic) Repair And Maintenance). All Interested Businesses Are Encouraged To Respond. submittal Information: it Is Requested That Interested Businesses Submit To The Contracting Office A Brief Capabilities Statement Package Demonstrating Ability To Meet The Requirements Outlined In Description. Responses Must Include 0610-rsd Overhaul Facility In Subject. This Documentation Must Address, At A Minimum, The Following: company Contact Information To Include: Company Name, Company Address, Cage Code, Company Business Size, And Point-of-contact (poc) Name, Phone Number, Fax Number, And E-mail Address. company Profile To Include: Number Of Employees And Duns Number; statement Regarding Capability: if You Are A Small Business, Provide An Explanation Of Your Company's Ability To Perform At Least 50% Of The Tasking Described In The Specifications. the Capability Statement Package Shall Be Sent Via Email To Air- 2.5.2.5.2 Navair Lakehurst Contracts, Zaib Nageeb, Zaib.nageeb.civ@us.navy.mil . Submissions Must Be Received At The Office Cited No Later Than 5:30 P.m. Eastern Standard Time On 4 October 2024. description: general Rsd Information: overall Dimensions – 100 X 70 X 14 Inches weight – 3200 Lbs hydraulic Fluid – Mil-h-83282a electrical – Input: 200v +/- 10% 3 Phase 400 Hz +/- 10% Current: Full Load – 6.7a Start Up - 25a representative Components: Accumulator, Hydraulic Actuators, Chains, Wire Rope Cables, Mechanical Linkages, Steel Plates, Machined Parts, Hydraulic Piping, Hydraulic Pump And Motor, Filter, Pulleys. how To Respond: all Interested Parties Must Submit Written Responses, Preferably Via Electronic Mail Within Fifteen (15) Days After Release Of This Rfi With Product Information That Meets All Or A Subset Of The Aforementioned Attributes. Please Submit Your Response To This Rfi Via E-mail No Later Than 4 October 2024, 5:30 Pm Edt To Contract Specialist, Zaib Nageeb At Zaib.nageeb.civ@us.navy.mil. The Navy Does Not Intend To Award A Contract On The Basis Of This Request Or Otherwise Pay For The Information Solicited. While The Navy Intends To Use This Information For Future Acquisition Planning Purposes, It Will Not Release Any Information About Your Approach That Might In Any Way Compromise Your Competitive Posture Or Proprietary Information. The Navy Will Not Use Any Information Provided To Level Your Company’s Approach Relative To Another Competitor. All Information Received In Response To This Rfi That Is Marked Proprietary Will Be Handled Accordingly. The Navy Will Not Be Liable For Or Suffer Any Consequential Damages For Any Proprietary Information Not Properly Identified. Proprietary Information Will Be Safeguarded In Accordance With The Applicable Navy Regulations. Responses To This Rfi Will Not Be Returned. Respondents Will Not Be Notified Of The Result Of The Review. Failure To Respond To This Rfi Does Not Preclude Participation In Any Future Associated Rfp/rfq That May Be Issued. Information Provided In No Way Binds The Navy To Solicit Or Award A Contract. If A Solicitation Is Released, It Will Be Synopsized On The System For Award Management (sam) Website: Www.sam.gov. It Is The Potential Vendor's Responsibility To Monitor This Site For The Release Of Any Follow-on Information.

Details: Description Qty Unit Item Description Estimated Unit Price Total Unit Price 14 Pcs #4 Gi Pipe Sch 4 Diameter 6,250.00 87,500.00 55 Pcs 2 X 6 X 1.5mm Tubular 2,950.00 162,250.00 25 Pcs 2 X 4 X 1.5mm Tubular 2,200.00 55,000.00 50 Pcs 2 X 3 X 1.2 C Purlins 1,025.00 51,250.00 45 Kgs Welding Rod 295.00 13,275.00 6 Pcs #4 Paint Brush 95.00 570.00 12 Gals Epoxy Primer 1,650.00 19,800.00 6 Gals Lacquer Thinner 690.00 4,140.00 6 Gals Paint Thinner 590.00 3,540.00 108 Pcs 1 ½ X 1 ½ X 3/16 Angle Bar 1,100.00 118,800.00 75 Pcs 4 X 8 Steel Matting 1,050.00 78,750.00 4 Gals Qde (black) 895.00 3,580.00 200 Lin.m Rib Type 0.40mm X 1.22 X Ls 480.00 96,000.00 12 Pcs Fascia Cap 0.40mm X 12’ X 8’ 485.00 5,820.00 12 Pcs Spanish Gutter 0.40mm X 24’ X 8’ 585.00 7,020.00 49 Lin.m Minirib 0.40mm X 1.22 X Ls 400.00 19,840.00 4 Boxes Blind Rivets 1/8 X ½ 495.00 1,980.00 45 Pcs Double Metal Furring 165.00 7,425.00 800 Pcs Teckscrew 2 ½ 7.00 5,600.00 18 Pcs Spanish Flashing 0.40mm X 24’ X 8’ 585.00 10,530.00 1 Pc Panel Board 1,250.00 1,250.00 1 Pc 60 Amp Circuit Breaker 795.00 795.00 1 Pc 15 Amp Circuit Breaker 550.00 550.00 1 Pc 20 Amp Circuit Breaker 550.00 550.00 2 Boxes 3.5mm2 Thhn Wire 5,500.00 11,000.00 1 Box 5.5mm2 Thhn Wire 6,500.00 6,500.00 30 Mtrs 8.0mm2 Thhn Wire 8,950.00 268,500.00 100 Mtrs 1/2” Flexible Hose 25.00 2,500.00 8 Pcs 3-gang Flush Type Outlet 350.00 2,800.00 10 Pcs Utility Box 70.00 700.00 1 Pc 3-gang Switch Flush Type 350.00 350.00 20 Pcs Junction Box 95.00 1,900.00 15 Pcs Receptacle Socket 4x4 110.00 1,650.00 3 Rolls Electrical Tape Big 88.00 264.00 300 Pcs Cable Tie 5.00 1,500.00 4 Pcs ¾” Pvc Pipe 350.00 1,400.00 14 Pcs #25 Watts Led Type Bulb 395.00 5,530.00