Battery Tenders

Description: Condemned And Overaged Loco Surplus To Railway. Loco No. 16485 (wdm3a) (with Separate Rectifier And Conventional Dbr, E- Beam Cable) Complete Loco With All Accessories Having Approximate Copper - Nil, Brass- 43.2 Kg, Al - Nil, Insulation Rubber - Nil, Ferrous- 51286.8 Kg, Total Weight - 51330 Kg. Approx Sse Lot No. Sse/d/et/24-25/28 Note - (1) Returnable Item Nil. Any Material Except Engine Hood, Cabin Hood, Radiator Compartment, Loco Nose Compartment, Super Structure, Empty Fuel Tank, Both Side Cbc, Draft Gear, Coupler & Related Item, Complete Bogie Without Traction Motor And Gear Case If Found, Will Not Be Delivered With This Loco. Battery Will Also Be Not Supplied With This Loco. (2) Surplus Diesel Locomotives With The Age Cum Condition Basis More Than 15 Years Or Above As Per Rly. Board L.no. 2021/m(l)/466/12 Pt Dated 29.12.2022 (3) Loco No. 16485 (wdm3a) Is Made Condemned As Per Gm (electrical) Hq/jbp L.no. Wcr.m.d.04.712 Dated 27.02.2024 Remarks- 1.lot To Be Sold On Number Basis 3. Handover May Be Allowed For Cutting And Easy Loading . 4. Lot To Be Bold As Is Where Is Basis.

Description: Procurement Of Lithium Battery For Numerical Protection Relays For 2x600mw, Sstpp, Mppgcl, Dongalia

Description: CATEGORY: EPSON INK BOTTLE 008 BK CYAN MAGENTA YELLOW , EPSON INK BOTTLE 011 BK , EPSON INK BOTTLE 012 PB CYAN YELLOW MAGENTA GY , EPSON INK BOTTLE 003 BK CYAN MAGENTA YELLOW , EPSON INK BOTLE 003 BLACK , BLANK CD R , BLANK DVD R , CARTAGE 12A , CARTAGE 88A , HP 158X CARTRIDGE , CMO BATTERY , A3 PLAIN PAPER , A3 MATTE PHOTO PAPER , A4 MATTE PAPER 240 GSM

Description: Tender For Work Of Reconditioning Of 2v-500ah & 2v-1000ah Battery Cells At 400/220kv Gcr-1 Chandrapur

Description: E Tendering On Partial Turnkey Procurement Of Set Of Battery 32 Nos Of Smf Ups Battery 12v 42ah For Ups Of Three Phase 20 Position Fully Automatic Energy Test Bench Class 02 Bearing Sr No 1422 2016 Make Meter Test Poland In Meter Testing Lab At M And

Description: Battery Box Cover For 120ah Battery Conforming To Rcf Drg. No. Cc71031

Description: Battery Connection Bolt Assembly

Description: CATEGORY: M 5 BOLT SS WITH NYLOC NUT , PLASTIC D SHACKLE 10 MM , D SHACKLE SS 14 MM , THREAD LOCKING ADHESIVE , BOW FENDER , BRIDGE PLATE SS WITH NUT BOLT AND WASHER SIZE 75X50X02 MM , NYLOC NUT BOLT M 6 WITH WASHER , DENDRITE RUBBER GUM SIZE 01 KG , SCREW SS SIZE 1 INCH , SCREW SS SIZE 3BY4 INCH , LUG PIN TYPE HEX 25 SQ MM , BATTERY CLIPS 16 AMPS , RUBBER BEADING FOR INSPECTION HATCH , CUTTING WHEEL , GRINDING WHEEL ALUMINIUM OXIDE , GRINDING WHEEL SILICON CARBIDE , HACKSAW BLADE 1 BY 2 INCH , M 16 NUTS AND BOLT WITH WASHERS , M 10 NUTS AND BOLT WITH WASHERS SS , M 8 BOLT SS WITH NYLOC NUT , LUG RING TYPE NEX 4 POINT 6 SQ MM , LUG RING TYPE HEX 10 SQ MM , LUG RING TYPE HEX 16 SQ MM , LUG RING TYPE HEX 25 SQ MM 35 SQ MM , LUG RING TYPE HEX 18 SQ MM , LUG PIPE CONNECTOR 10 SQ MM , LUG PIN TYPE HEX 1 SQ MM , LUG PIN TYPE HEX 2 POINT 5 SQ MM , LUG RING TYPE HEX 25 SQ MM , LUG RING TYPE HEX 2 POINT 5 SQ MM , O RING KIT , LUG SNAP TYPE FEMALE HEX 1 POINT 5 SQ MM , LUG RING TYPE HEX 6 POINT 4 SQ MM , LUG RING TYPE HEX 1 POINT 5 SQ MM

Description: CATEGORY: Repair of Jack 20 Ton , Servicing of Power Utility Device , Repair of Portable Welding Machine , Repair of Bosch Professional metal cut off Grinder , Refilling of Oxygen Cylinder , Refilling of Acetylene Cylinder , Repair of Fast Battery Charger 30A , Repair of Fuel Injector Tester , Repair of GDS 18E Impact wrench bosch

Description: CATEGORY: Phased Array Ultrasonic Flaw Detector 32 128 elements PR configuration , Mini Encoder quadrature or clock direction type , Lithium Iron Battery Pack rechargeable type minimum 90 Watts hour , External battery charger Lithium Iron Battery Pack Compatible , Standard Phased Array Probe Frequency 5.0 MHz , Standard Phased Array Probe Frequency 2.25MHz Linear Array , Standard Phased Array Probe Frequency 2.25MHz Dual Linear Array , Phased Array Probe Frequency 4MHz Dual Matrix Array , Phased Array Probe Frequency 10 MHz Linear Array , Standard Wedge for Angle Beam PhasedArray Probe Normal scan 55 Deg Refracted Angle in Steel , Standard Wedge for Angle Beam PhasedArray Probe Normal scan 0 Deg Refracted Angle in Steel , Wedge for Dual Phased Array probe Normal Scan 55Deg Refracted Angle , Wedge for Dual Phased Array Probe Normal scan Capable of sectorial and surface waves , Wedge for Dual Phased Array Probe Normal scan 55 Deg Refracted Angle in Steel , Standard calibration block made of Carbon Steel consisting of total 10 nos. side drilled holes of diameter 2.5mm each , Standard calibration block made of Stainless Steel consisting of total 10 side drilled holes of diameter 2.5mm each