Astm D Tenders

Details: Description Item Description Abc Unit Quantity 1 Additional Works For The Proposed Construction Of New Deepwell Water System With 120cu.m. Modular Water Tank (please See Attach File) 1,401,870.29 Lot 1.00 Terms Of Reference Project Title: Additional Works For The “proposed Construction Of New Deepwell Water System With 120cu.m. Modular Water Tank”(contractno. 2023-027) Projectcost: Php1,401,870.29 Project Duration: 45 Calendar Days ________________________________________________ Rationale: During The Construction Phase Of The Water Tank And Deep Well Water Supply System, It Was Discovered That There Is A Need To Install A Upvc Sure-loc Pipe Riser Instead Of A Butt-welded Hdpe Pipe For Ease Of Repair And Maintenance, Convenience Of Replacement, And Workability For Future Improvements. We Will Also Be Installing A Waterproof Submersible Electrical Wire Intended For Deep Well Water System Use. This Will Be Implemented While Deep Well Drilling Is Still Ongoing For Streamlined Activity. Scope Of Works 1) Supply Of Sure-loc Riser Pipes And Other Accessories Of The Pipe Riser. 2) Installation Of Sure-loc Pipe Riser. 3) Testing For Leaks And Defects Of The System. 4) Fabrication And Installation Of Control Panel Cover/housing. 5) Installation Of Waterproof Submersible Electrical Wires To Be Connected From The Control Panel To The Submersible Pump. 6) Excavation Works Of Yard Piping To Prevent The Hindrance To The Parking Space In Front Of Mhu Bldg. 7) Turn-over Of The System Along With The Elevated Modular Tank And Deepwell Water System. Terms And Condition 1) Delivered Materials Shall Be Inspected On Site Before Installation. 2) Supplier Shall Offer Warranty Incase Of Material Defects. 3) After-market Support Shall Be Provided By The Installer. 4) Bidders And Suppliers Must Secure A Certificate Of Site Inspection Three (3) Days Before The Closing Of The Bidding. Item Description Qty Uom Unit Cost Total Cost 1 Upvc Sure-loc Pipe 100mm Dia., 8.56mm Thck. 3m/length, Astm D 1785 Schd 80, Blue 18 Length 2 Upvc Sure-loc Coupler With Plastic Spine Lock And Rubber O-ring 17 Pc/s 3 Stainless Steel Pipe 100mm Dia., Schd 80 For Bottom Connector 1 Pc/s 4 100mm Dia., Schd 80 For Top Connector 1 Pc/s 5 Submersible Cable #4-3/c 66 Meters 6 Splicing Kit 1 Set 8 Consumables 1 Lot 9 Yard Piping Excavation 1 Lot Total Total Abc 1,401,870.29

Description: Request For Quote 70z08524q40184b00 quote Due Nlt: 08/12/2024, 12 Pm Est item Required Delivery Date: 09/15/24 naics 332911 this Is A Combined Synopsis/solicitation For Commercial Items, Prepared In Accordance With The Format In Subpart 12.6 Of The Far Part 12 - Acquisition Of Commercial Products And Commercial Services | Acquisition.gov And As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotes Are Being Requested And A Separate Written Solicitation Will Not Be Issued. request For Quote Number In Header Applies And Is Used As The Solicitation Number. This Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular 2005-87, Effective, 7 March 2016. it Is Anticipated That A Competitive Price Purchase Order Shall Be Awarded As A Result Of This Synopsis/solicitation. All Responsible Sources May Submit A Quotation, (vendor Must Have An Active Registration In Sam.gov Prior To Award) Which If Timely Received, Shall Be Considered By This Agency. payments Are Net 30 And Will Be Made In Accordance With The Far 52.232-25 Prompt Payment Clause 52.232-25 Prompt Payment. | Acquisition.gov. all Acquisitions Expected To Exceed $10k Can Also Be Found On Sam.gov Under The Same Solicitation/rfq Listed In The Header. the U.s. Coast Guard, Surface Forces Logistics Center (sflc) Intends To Award A Firm Fixed Price Purchase Order. important**please Read: it Is The Government’s Belief That Only The Oem, Appleton Marine, Inc. And/or Their Authorized Distributors, Can Obtain The Required Technical And Engineering Data And Genuine Oem Parts Required To Successfully Provide These Items. Authorized Distributors Having The Expertise And Required Capabilities To Provide These Items Are Invited To Submit A Quote. If You Submit A Quote For This Solicitation, It Must Include A Letter From The Oem, Verifying Your Company Is An Authorized Appleton Marine, Inc. Distributor. the United States Coast Guard Surface Forces Logistics Center Has A Requirement For The Following Items: vendor Shall Provide: vendor Name: vendor Address: vendor Sam.gov Uei: vendor Phone: vendor Email: no Substitutions Will Be Authorized Without Approval From Uscg Sflc Technical Experts. line Item 1 nsn: 4810 01-f17-5027 description: Valve Assy, Directional Cont mfg Name: Appleton Marine Inc part_nbr: Ymd-12866 quantity: 5 Ea unit Price: ­­­­­­­­­­­­­­­­­­­______________________ total Price (shipping Must Be Included): ________________________ descriptive Data: valve Used On The Sb230-42 Crane. packaging And Marking Requirements: individually Packaged In Accordance With Mil-std-2073-1 E Method 10, Cushioned In A double Layer Of 3/4 In Bubble Wrap And Packed In An Appropriately Sized Astm-d6880 class 2 Heavy Duty Screwed Wooden Box. package Label: item Name part Number nsn qnty: (example 1 Ea) cond-a contract Number / Order Number marking Iaw Mil-std-129r Except Bar Coded Iaw Iso/iec-16388-2007, Code 39 symbology. poc: Michael Mooney e-mail: Michael.p.mooney1@uscg.mil ph: 571-607-6027 all Items Required Delivery Date: 09/15/2024 if Unable To Meet Required Delivery Date, Please Provide Dd: ________ - No Substitutions. are You Able To Meet Packaging Requirements? Yes ___ No ____ ** Total Cost Shall Have Delivery And Any Freight Charges To Zip Code 21226 Included. ** ** Shipping: Fob Destination Required. ** ship To: Uscg Surface Forces Logistics Center 2401 Hawkins Point Road Receiving Room- Building 88 Baltimore, Md 21226 preparation For Delivery all Material Must Be Shipped To U.s. Coast Guard Surface Forces Logistics Center, 2401 Hawkins Point Road, Receiving Room- Bldg 88, Baltimore, Md, 21226 For This Purchase Order. Material Must Be Accompanied By An Itemized Packaging List Securely Attached To The Outside Of The Shipment. all Packing Lists Shall Cite The Purchase Order Number With The Packaging In Such A Manner To Ensure Identification Of The Material Provided. material Shall Be Packed For Shipment Using Military Packaging, For Examples In Packaging Please Reference Mil-std-2073-1e. Material Must Be Packaged In Such A Manner As To Afford Adequate Protection To The Item Against Corrosion, Deterioration, And Physical Damage During Shipment From The Supply Course To Surface Forces Logistics Center Locations. packaging Shall Provide Adequate Protection For Warehouse Storage And Shipments From The Warehouse. all Deliveries Are To Be Made Monday Through Friday Between The Hours Of 8:00 A.m. Est To 1:00 P.m. Est. please Make Sure That Any Changes In Delivery Timeframes Or Tracking Information Get Sent To Gina.m.baran@uscg.mil u.s. Coast Guard Approved Label Should Have The Following: national Stock Number (nsn) item Name part Number purchase Order Number the Words “coast Guard Sflc Material” Condition (a) quantity And Unit Of Issue (i.e) (1-ea) invoicing In Ipp it Is Now A Requirement That All Invoicing For Purchase Orders Will Now Be Entered And Processed Through Https://www.ipp.gov. all Invoices Must Contain The Following Information: Cg Contract Number, Vendor’s Invoice Number, Vendor’s Uei, Uei & Tins Number, Cage Number, Po Item Number, Description Of Supplies Or Services, Unit Prices And Extended Totals (invoices For Purchase Orders Awarded By Surface Force Logistics Center, Baltimore Are To Be Sumitted As Non-po In Ipp). to Submit An Invoice, Vendor Must Have Access To Www.ipp.gov. Additionally, A Copy Of The Invoice Must Also Be Sent To The Po Issuing Office At: Gina.m.baran@uscg.mil

Details: Amendment 0001: the Purpose Of This Amendment Is Make An Industry Day Announcement. Please See Section Labeled Industry Day Below. original Posting: n0016425rwm46 – An/slq-32(v)6 Antenna Shelter Refurbishments – Psc J020 – Naics 332710 anticipated Issue Date: 18 Nov 2024 – Closing Date: 17 Dec 2024 4:00 Pm Edt naval Surface Warfare Center (nswc) Crane Has A Requirement For The Procurement Of Mechanical Refurbishment And Replacement Of An/slq-32(v)6 Shelter Structures. This Requirement Includes Disassembly, Abrasive Blasting, Coating, Reassembly, And Production Of The Aluminum An/slq-32(v)6 Shelter Structures. This Requirement Will Be Satisfied Via A Tiered Approach With Varying Levels And Pricing Of Refurbishments Being Completed. The Government Anticipates Awarding A Single Five-year Indefinite-delivery Indefinite-quantity (idiq) Contract With Firm-fixed-price Line Items. Anticipated Idiq Quantities Are A Minimum Of One (1) Shelter Set And A Maximum Of 125 Shelter Sets Over The Life Of The Contract. Unit Of Issue Is Each. requirements Include The Following: machining Capabilities Of Components Measuring Up To 103” X 52” X 6” mechanical Disassembly Of Aluminum 6061 Components abrasive Blasting Aluminum 6061 Components Per Mil-std-1504 Or Sspc Sp 10 To Achieve Surface Roughness Of 0.002 In To 0.004 In Per Astm D4417 hard Anodizing Aluminum 6061 Components Per Mil-a-8625, Type Iii, Class 1 priming Aluminum 6061 Components Per Mil-dtl-24441, Type Iv, One Coat, Dry Film Thickness A Minimum Of 0.002 In painting Aluminum 6061 Components Per Mil-prf-24635 Type V, Class 2, Grade B, Color Gray Semigloss (haze) Per Fed-std-595, Two Coats Dry Film Thickness 0.003 In. Min. replacing Stainless Steel Threaded Inserts Per Nasm47196, A-a-59158 And Nasm33537 stenciling Or Marking Painted And Anodized Aluminum 6061 Components Per Mil-std 130 Using Epoxy Ink Per A-a-56032 Type I; Or Labeling Painted And Anodized Aluminum 6061 Components Per Mil-prf-61002a, Grade A, Style 1, Composition C mechanical Assembly Of Aluminum 6061 Components transportation Of Loaded Wooden Crates Measuring 123" X 81" X 63", Weighing 2500 Lbs. the Government’s Technical Data Package (tdp) For This Effort Is Provided As A Controlled Attachment. Solid Cad Models Of All Components Are Also Available. the Navy Intends To Solicit This Contract As A Total Small Business Set-aside Iaw Far Subpart 19.502-2. Delivery Is Required Fob Destination Nswc Crane Within 6 To 12 Months Depending On The Repair Tier Required. The Solicitation Will Be Made Available On Sam.gov Via The Piee Solicitation Module. All Changes That Occur To Competitive Actions Prior To The Closing Date Will Be Posted To Contract Opportunities On Https:/sam.gov/ Via The Piee Solicitation Module. For Within Scope Changes Made After The Closing Date, Only Those Offerors That Provide A Proposal Will Be Provided Any Changes/amendments And Considered For Future Discussions And/or Award. the Solicitation, All Amendments And Associated Controlled Documents Will Be Posted Onprocurement Integrated Enterprise Environment (piee Formerly Known As Wawf) Solicitationmodule At Https://piee.eb.mil. The Solicitation Notice Will Flow To Sam.gov, But The Actual Posting Will Be In Piee. The Proposal Shall Also Be Submitted Through The Solicitation Module In Piee. information Regarding How To Set Up A Vendor Registration Is Included In This Link: Dod Procurement Toolbox Https://dodprocurementtoolbox.com/site-pages/solicitation-module. Choose Vendor Access Instructions. contractors Must Be Properly Registered In The System For Award Management (sam) And The Joint Certification Program (jcp) In Order To Receive The Controlled Attachments. Offerors May Obtain Information On Sam Registration And Annual Confirmation Requirements By Calling 1-866606-8220 Or Via The Internet At Https://www.sam.gov. Information About The Jcp Is Located At Https://public.logisticsinformationservice.dla.mil/publichome/jcp/default.aspx . The Controlled Attachments Will Be Posted At The Same Time The Solicitation Is Posted. questions Or Inquiries Should Be Directed To Clay Raber, Code 0243, Telephone 812-381-3553, Email Clayton.l.raber.civ@us.navy.mil. Please Reference The Above Solicitation Number When Responding To This Notice.

Details: The Department Of Defense (dod) Drug Demand Reduction Program (ddrp) Has A Requirement For Fda And Quality Management Documented 6-acetylmorphine Immunoassay Reagent Kits For Use With The Currently Installed Beckman Coulter Au5800 Series Systems. The Reagents Shall Be Capable Of Detecting 6-acetylmorphine In Human Urine Samples. Proposals Shall Comply With The Statement Of Work (sow). the Reagent Kits Are Required For A Period Of Performance (pop) Of Five (5) Years. The Estimated Number Of Tests Shall Accommodate Up To 500,000 Tests Per Month. only Original Equipment Manufacturer (oem) Of Reagents, Authorized Dealer, Authorized Distributor Or Authorized Reseller For The Proposed Reagents, Such That Oem Parameters, Quality Controls And Services Are Provided And Maintained By The Oem, Will Be Considered. All Storage, Shelf-life, And Expiration Dates Associated With The Reagents Shall Be In Accordance With The Oem Terms And Conditions, As Specified In The Sow. the Oem’s Reagent Product Shall Not Be Repackaged By The Offeror Unless Authorized, As Specified In The Sow. the Vendor Shall Comply With The Fda And Quality Management Documentation, As Specified In The Sow. the Vendor Shall Comply With The Reagent Preparation And Calibration Information, As Specified In The Sow. 1.1. Scope. The Materials Shall Be For The Initial (screen) Immunoassay For The Detection Of 6-acetylmorphine (6am) In Urine When Present At A Concentration Equal To Or Greater Than 10 Ng/ml The Reagent Shall Be Compatible With The Beckman Coulter Au5800 Series Clinical Chemistry Analyzers (hereafter Referred To As “analyzer”) In Use At The Department Of Defense (dod) Forensic Toxicology Drug Testing Laboratories (ftdtls), To Include The Armed Forces Medical Examiner System (afmes) Forensic Toxicology Division, Without Modification Of The Equipment. The Immunoassay Procedure Is Limited To A Two Reagent Assay Procedure. A Vendor’s Reagent Proposal Which Requires A Separate Pretreatment Of Each Testing Specimen Prior To Testing On The Analyzer Will Not Be Considered Acceptable. The Reagent Shall Be Compatible With The Optimal Throughput Of The Analyzer Systems And Shall Not Interfere With The Optimum Performance Of The Other Immunoassay Procedures Performed On These Instruments. The Reagent Shall Not Impose Additional Maintenance, Servicing, Or Calibration Requirements For The Optimum Performance Of The Contractor’s Reagent On The Analyzer. Immunoassay Kits Shall Have Clearance From The Fda In Order To Meet The Requirements Of Dodi 1010.16 Rev. (june 15, 2020). Immunoassay Kits Will Be Evaluated Based On Their Ability To Accurately Detect 6am Based On The Testing And Performance Characteristics In Conjuncture With All Evaluation Factors. 1.2. Sensitivity And Specificity. The Analyzer Shall Be Calibrated At 10 Ng/ml Using Dod Ftdtl Prepared And Certified Solutions Containing 6-am. The Controls Will Utilize The Same Compound As The Calibrator. The Reagent Shall Minimize Cross-reactivity With Structurally Similar Drugs/metabolites In Addition To The Drugs/metabolites On The Current Dod Drug Testing Panel, Listed Below (excluding The Compound Of Interest). The Reagent Shall Demonstrate Calibration Stability, As Evaluated By Frequency Of Control Failures, And Shall Require Calibration No More Than One Time During An 8 Hour Period. The Following Drug Cutoffs Are Currently Used By Dod For The Initial Immunoassay Screen And Chromatographic/spectrometric Confirmation Tests, Respectively. 1.3. Compliance With Food & Drug Administration (fda) Requirements. 1.3.1 Immunoassay Kits Are Considered Medical Devices And Shall Have Clearance From The Fda To Be Marketed. The Registration And Listing Process Specified By The Fda Shall Be Followed And The Manufacturer Shall Adhere To Good Manufacturing Processes In The Manufacture Of The Devices. Any Mandatory Recalls Of The Kits Provided Under The Resulting Contract And Any Other Problems That Require Notification To The Fda Shall Be Resolved As Required By The Fda Regulations Current At The Time. The Contractor Shall Notify The Contracting Officer Of Any Recall Or Fda Notification Within Two Working Days Of The Event. 1.3.2. Except As Provided Herein, The Reagents Supplied Throughout The Term Of This Contract Shall Be Identical To The Reagents Offered By The Contractor And Accepted By The Government At The Time Of The Contract Award. If, During The Course Of This Contract, The Manufacturer Wishes To Change Or Improve Its Kit, That Product Modification Shall Be Proposed In Writing To The Contracting Officer For Approval Prior To Its Incorporation Into The Kits To Be Delivered. The Contractor's Proposal Shall Include Documentation That Demonstrates That The Manufacturer Has Complied With All Applicable Fda Regulations, Including Those Concerning The Filing Of A New 510k Notice If Such Action And Subsequent Fda Clearance Are Warranted By The Nature Of The Modification. 1.4. Packaging. The Reagents Provided Shall Be In Volumes And Packaging That Are Convenient And Applicable To The Sample Throughput At The Ftdtls And Shall Not Result In The Loss Or Unnecessary Disposal Of More Than 3% Of The Working Volume Of Reagent. The Contractor Shall Not Be Required To Provide Calibrators/controls. The Reagents Shall Be Provided With An Instruction Sheet That Complies With All Requirements Of The Fda And Includes Data Demonstrating Specific Performance Characteristics, Such As Accuracy, Precision, Sensitivity, Specificity, Cross-reactivity, And Safety Precautions. The Instruction Sheet(s) Shall Include Procedures And Instrument Parameters Optimized For Ftdtl Operations As Represented In These Specifications And Cutoffs As Utilized By The Dod. The Government Shall Not Develop Procedures Or Optimize The Performance Of A Kit For The Contractor. Offeror Shall Not Repackage Or Relabel An Oem Product Unless Authorized. 1.5. Shelf Life. The Minimum Shelf Life Of Any Unopened Component Of The Assay Shall Be At Least 180 Days From The Date Of Delivery To The Ftdtl. All Storage, Shelf Life, And Expiration Dates Associated With The Reagents Shall Be In Accordance With The Oem Terms And Conditions. Once Kit Container Seals Are Broken And The Components Are Opened, The Shelf-life Shall Be At Least 14 Days. 1.6. The Ftdtls Intend To Use The Immunoassay Kits In A Manner Consistent With The Fda Approval. The Package Insert And Information For The Analyzer Settings Must Contain The Information Necessary For The Ftdtls To Use The Immunoassay Kits Consistent With The Device’s Fda Approval. This Ensures That The Ftdtls Can Use The Immunoassay Kits Properly And Derive The Full Benefit Of The Fda Approval. 2. Testing And Quality Control Protocol. 2.1. The Reagents Supplied Shall Be Compatible With The Calibration Requirements And Characteristics Of The Beckman Coulter Au5800 Series Clinical Chemistry Analyzers. Verification Of Each Calibration, At 10 Ng/ml, Shall Be Accomplished With A Drug Free Control And Open Controls At Target Concentrations Of 50-75% And 150-200% Of The Calibrator/cutoff. An Acceptable Verification Will Have Analytical Readings As Follows: Drug Free Control < 50-75% Control < Cutoff (calibrator) < 150-200% Control. The Batch May Also Contain Blind Negative And Positive Controls Distributed Throughout The Batch. 3. Performance Characteristics. 3.1. The Reagent Shall Be Capable Of Identifying Specimens As Positive For 6am When Present In Human Urine At Concentrations Equal To Or Greater Than 10 Ng/ml As Determined By The Current Immunoassay And Gas Chromatography-mass Spectrometry (gc-ms) Or Liquid Chromatography- Tandem Mass Spectrometry (lc-ms/ms) Procedures Utilized In The Ftdtls (and Afmes). 3.2. The Reagent Shall Be Capable Of Identifying Specimens As Negative For 6am When Present In Human Urine At Concentrations Below 10 Ng/ml As Determined By The Current Immunoassay And Gc-ms Or Lc-ms/ms Procedures Utilized In The Ftdtls (and Afmes). 3.3. The Reagent Performance, As Evaluated Through The Performance Of Controls, Shall Be Stable Over The Course Of The Day And Shall Not Require Re-calibration Within An Eight Hour Period. 3.4. The Reagent Shall Display Precision And Accuracy Both Within And Between Batches For Concentrations Ranging Between 50-200% Of The Calibrator Concentration. 3.5. The Reagent Shall Produce Non-overlapping Ranges For Samples Analyzed At 0%, 50%, 100%, 150%, And 200% Of The Calibrator Concentration. 3.6. The Reagent Shall Have Minimal Cross Reactivity With Analytes Other Than 6-am. 4. Quality Assurance Program Of The Manufacturing Process Shall Possess Current Iso-9000 Series Certification, Current Iso 13485 Series Or Include Documentation Of The Following Elements: 4.1. Chemicals And Reagents 4.1.1. Quality And Authenticity. All Materials Used In The Preparation Of Reagents Shall Be Verified As To Authenticity And Purity. Methods May Include, But Are Not Limited To, The Determination Of Melting Points, Gc-ms, Nuclear Magnetic Resonance, And Spectrophotometric Measurements. 4.1.2. Stability. The Kit And Each Kit Component Shall Be Shown To Be Stable And At The Correct Concentration Over The Period Of Use. Components That Are Homogeneous Solutions Shall Not Deteriorate Throughout The Period Of Use Of The Kit (from Date Of Preparation To Date Of Expiration). 4.2. Manufacturer’s Equipment 4.2.1. Preventative Maintenance. Routine Preventive Maintenance Procedures, Periodic Calibration, And Any Unscheduled Maintenance Shall Be Fully Documented And In Accordance With Recommendations Of The Manufacturer Of The Equipment. 4.2.2. Calibration And Operational Checks. All Instruments That Are Used To Check A Physical Parameter Of A Solution Or Material Shall Be Calibrated And Have Documentation Available To Demonstrate That All Required Operational Checks Have Been Completed. This Includes Ph Meters, Spectrometers, Micropipettes, Etc. 4.2.3. Temperature Checks. Water Baths, Refrigerators, Freezers, And Other Equipment That Is Intended To Maintain A Given Temperature Shall Be Periodically Validated For Accuracy And Routinely Verified For Correct Settings. 4.2.4. Glassware And Other Reusable Supplies. Appropriate Procedures For Cleaning And Inspecting Glassware And Other Reusable Materials Shall Be Established And Compliance Documented. 4.3. Antibody 4.3.1. Authenticity. The Prepared Antibody Shall Be Verified To Be Authentic And Its Purity Established. 4.3.2. Stability. The Antibody Shall Be Documented To Be Stable To The Expiration Date And The Immunoassay Shall Meet All Contract Specifications To The End Of Expiration Date (a Minimum Of 180 Days From Date Of Delivery To Ftdtl/afmes). 4.3.3. Specificity. Antibody Specificity Shall Be Verified For Each Lot And The Specificity Re-evaluated At Routine Intervals To Ensure Uniformity And Quality Of Preparations. The Reagent Shall Provide Performance Characteristics In Terms Of Sensitivity And Specificity For Detection Of 6am In Urine. Chemical Compounds That May Reasonably Be Found In Urine Resulting From Prescription Or Non-prescription Drug Use Shall Be Tested To Characterize Antibody Specificity. Specificity Testing May Include Biochemical Materials Produced Normally In The Human Body. 4.4. Immunoassays 4.4.1. Technical Performance. Performance Of Each Lot Of Reagent Shall Be Verified. The Verification Shall Establish, As A Minimum, The Appropriate Response To The Target Molecules And That All Other Parameters As Specified In The Contract Are Met. The Performance Parameters Involved In The Testing Procedures Shall Be Verified And Documented To Be Consistent Throughout The Shelf Life Of The Kit. 4.4.2. Manufacturer’s Production Manual. Procedures And Criteria Required To Validate All Components (and Materials) Employed During The Manufacture Of The Reagents In The Test Kits And The Operation Of The Completed Kit Over The Entire Period Of Shelf-life Of The Kit Shall Be Described In Detail. All Steps Of Each Quality Control Procedure Shall Be Described Thoroughly. 4.4.3. Records. The Production And Quality Control Records Generated By Each Procedure Performed Above Shall Be Maintained In A Systematic Fashion To Permit The Verification Of The Completion Of All Production Parameters And Shall Be Available For Inspection During The Term Of The Contract. 4.4.4. Corrective Action. When A Specified Quality Control Parameter Is Found To Be Out Of Limits, The Action Taken To Ensure Correction For Existing Kits (i.e., Notification) Shall Be Documented And Action Taken To Ensure That The Deficiency Does Not Reoccur. All Records Shall Be Retained. The Contracting Officer Shall Be Notified Within 2 Working Days Of Any Deficiencies In Existing Kits And Of All Corrective Actions For Consideration, I.e., Delivery Of Replacement Kits At No Cost To The Government. The Fda Shall Be Notified According To Its Regulations. 4.4.5. Lot Numbers. Lot Numbers Shall Be Used To Identify Reagents To Allow Tracking Of All Immunoassay Components. The Procedures Used To Assign Unique Lot Numbers For Each Solution Or Reagent Shall Be Described. A Single Lot Number For A Kit Shall Suffice If All Materials Used In That Lot Number Can Be Tracked To Identify The Materials And Procedures Used In The Preparation Of That Kit. 5. Packaging And Marking. 5.1. Thermal Protection For Biologic Reagents. The Contractor Shall Ship Biologic Reagent Items Used In The Reagent Kits In Insulated Thermal Containers To Ensure Protection Of The Reagents Against Thermal (heat And Cold) Damage Which Would Affect Reagent Performance Contained In The Statement Of Work Of This Contract. 5.2. Marking Of Shipments (commercially-packaged Items). Marking Shall Be In Accordance With Astm D 3951 15, "standard Practice For Commercial Packaging." 5.2.1. Additional Markings Include: Contract Number & Government Delivery Order Number. 5.3. Deteriorative Material Marking. The Contractor Shall Include As Part Of The Marking, The Following Information: (a) Expiration Date; (b) Required Storage Conditions For Each Kit Component; And (c) Type I Or Type Ii Shelf Life Date As Specified In Mil-std-129 For Each Unit Of Material, Issue, Package, Intermediate Container And Exterior Shipping Container.

Details: Description Lot A 23 Box Clearbook, A4 Size (piece)refillable, Material: Plastic, Cover: Opaque Plastic, Dimension: 310mm X 235mm (min.), Thickness: 0.5mm (min.), Pocket: Transparent Plastic, Number Of Pockets: Twenty (20), Thickness: 0.04 Mm (min.), Color: Assorted ( Black, Blue, Red, Yellow) 23 Box Clearbook, Legal Size (piece) Refillable, Material: Plastic, Cover: Opaque Plastic, Dimension: 345mm X 235mm (min.), Thickness: 0.04mm (min.), Color: Assorted ( Black, Blue, Red, Yellow) 30 Piece Eraser, Plastic/rubber (piece) Rectangular, Dimension (l X W X T) (min.): Equivalent Volume Of 8,350mm3 422 Piece Sign Pen, Extra Fine Tip, Black (piece) Ink Color: Black, Type: Liquid Or Gel, Tip: 0.5mm, Needle Type, One (1) Piece Barrel (non-refillable), Writing Length: One (1) Km (min) 172 Piece Sign Pen, Fine Tip, Black 182 Piece Sign Pen, Medium Tip, Black (piece) , Black (piece) Ink Color: Black, Type: Liquid Or Gel, Tip: 0.7mm, Needle Type, One (1) Piece Barrel (non-refillable), Writing Length: One (1) Km (min) 43 piece Sign Pen, Medium Tip, Blue(piece) , Blue(piece) Ink Color: Blue, Type: Liquid Or Gel, Tip: 0.7mm, Needle Type, One (1) Piece Barrel (non-refillable), Writing Length: One (1) Km (min) 1 pack "wrapping Paper, Kraft, Weight: 65gsm (-5%), Size: Width: 914.4mm (36"") (-3mm), Length: 1,219.4mm (48"") (-3mm)" 25 pack  Battery, Dry Cell, Size Aa (pack) 1.5 Volts, Alkaline, Minimum Of Thirty (30) Minutes Runtime With A Current Draw Of 1.0 Amp Until Cut-off At One (1) Volt 19 pack  Battery, Dry Cell, Size Aaa (pack)1.5 Volts, Alkaline, Minimum Of Thirty (30 Min.) Runtime With A Current Draw Of 0.5 Amp Until Cut-off At One (1) Volt, Shelf Life: Five (5) Years (min) From Date Of Acceptance 19 Bottle Ink, For Stamp Pad (bottle) Volume (min): 50ml, With Applicator, Shall Conform With The Required Perfamnce Test: Dry Time, Stability Test, Resistance To Water, Effect On Rubber Stamp, Corrosion Of Stamp-pad Container 2 Unit Digital Voice Recorder, Built-in Memory: 4gb (expandable), Channel: Stereo, Recording & Playback Format: Mp3, Wma, Earphone Jack, Built-in Microphone, Usb Connectivity, Battery Life 20 Hours (min) (recording Mode, Mp3 128kbps 2 Unit Fire Extinguisher, Dry Chemical, Capacity In Terms Of Mass Of Extinguisher Medium: 4.5kg (10lbs), Purity Of The Chemical: 75% (min.), Duration Of Discharge: 10 Seconds (min.) 5 Piece Philippine National Flag (piece) Type: 1, Size: Length: 1,828.8mm (6') (-3mm), Width: 914.4mm (3') (-3mm), Material: 100% Polyester, With Certificate Of Accreditation From National Historical Commission Of The Philippines (nhcp) 4 Unit "external Hard Drive (unit) Capacity: 1tb, Weight: 181 G - 205 G, Storage Media: 2.5""sata Hdd, Rotational Speed: 5400 Rpm, System Requirements: 1. Ms Windows 7, Ms Windows 8, Ms Windows 10, Mac Os 10.7 Or Later, Linux Kernel 2.6.31 Or Later, Antivirus: Pre-installed Antivirus (optional), Accessories: With Usb 3.0 Cable And Product Manual In English" 17 Piece Flash Drive (piece) 64gb Capacity 7 Unit Computer Mouse, Wireless (unit)connection Type: Usb, Tracking Method: Optical, Resolution: 1,000 Dpi (min), High-definition Optical: 2.5x More Responsive Than Standard Optical Mouse, 1000dpi High Technology Delivers Smoother, More Accurate Cursor Control 15 Piece Light-emitting Diode (led) Light Bulb, 7 Watts, Power Consumption: 7 Watts (max), Color Temperature: 6,500 Kelvin, Lumen Output: Not Less Than 530 Lumens, Frequency Rating: 60hz, Color Rendering Index: 80 +/-10%, Input Voltage: 220-240 Volts, Ac, Socket Base: E27, Light Color: Cool Daylight, Power Factor: Not Less Than 0.90, Average Life: Not Less Than 15,000 Hours, Operating Temperature: ≥ 35°c 73 jar Glue, All-purpose (bottle) Gross Weight (min.): 200 Grams, Free Formaldehyde(max.): 0.1%, Adhesive Strength - No Slippage On Pasted Part, Solid Content (min.): 30%, Ph: 4 To 8,container: Plastic Jar, Cap: Plastic Non-stick Easy Open Twist Top, With Tapered Applicator Attached To The Cap 42 box Staple Wire, Heavy Duty (binder Type), 23/13, Type: Chisel Point, Thickness: 0.60mm (-0.05), Width: 13mm (0.20), Leg Length: 13mm (-0.30), Number Of Staples Per Strip:100, Number Of Staples Per Box: 1,000, Binding Capacity: 40-90 Sheets Of 70gsm Multi-purpose Paper 201 box Staple Wire, Standard (box) 5000 Wires Per Box, Dimensions, In Mm: (see Fig. 1), Width (w): 12.70 +0.15mm/-0.20mm, Leg Length (l): 6.00 +0.50mm/-0.20mm, Thickness (d): 0.40 + 0.05mm, Width (e): 0.50 + 0.05mm, Number Of Wires Per Strip: 100 (min) 12 roll Tape, Electrical, Made Of Polyvinyl Chloride (pvc), Width: 18mm (min.), Length: 16 Meters (min.), Assorted Colors 36 roll Tape, Masking, 24mm (roll)width: 24mm (+1mm), Usable Length: 50 Meters, Adhesion Strength: 8.5n/24mm Width (min), Breaking Strength: 65n/24mm Width (min) 68 roll Tape, Masking, 48 Mm (roll) Width: 48mm (+1mm), Usable Length: 50 Meters, Adhesion Strength: 8.5/24mm Width (min), Breaking Strength: 65n/24mm Width (min) 70 roll Tape, Packaging, 48 Mm (roll) Color: Tan, Width: 48mm (+1mm), Usable Length: 50 Meters, Base Material: Biaxially-oriented Polypropylene, Adhesion Strength: 6n/24mm (min), Breaking Strength: 14n/24mm (min) 52 roll Tape, Transparent, 24mm (roll) Width: 24mm (+1mm), Usable Length: 50 Meters, Base Material: Biaxially-oriented Polypropylene, Adhesion Strength: 6n/24mm (min), Breaking Strength: 14n/24mm (min) 69 roll Tape, Transparent, 48 Mm (roll) Width: 48mm (+1mm), Usable Length: 50 Meters, Base Material: Biaxially-oriented Polypropylene, Adhesion Strength: 6n/24mm (min), Breaking Strength: 14n/24mm (min) 11 roll Twine, Plastic (roll) Weight Per Roll (min.): 1000g, Breaking Strength(min.): 25kg 20 piece Ruler, Plastic, 450mm (piece) Transparent/clear, Ruler Scale: Millimeters, Centimeters, Inches, Clear And Sharp Ruler Scales, Width: 38mm (min), Thickness: 1.30mm (min) 14 unit Calculator, Compact (unit) Width: 100mm - 130mm, Lcd Display, Capacity: 12 Digits, Two Way Power Source (solar And Cell) 10 boc Clip, Backfold, 15mm 87 box Clip, Backfold, 19mm (box) All Metal, Clamping Length: 19mm (-1mm), Clamping Depth: 10mm (min.), Thickness Of Metal: 0.20mm (min.), Diameter Of Clip Handles: 1.0mm (min.) 94 box Clip, Backfold, 25mm (box) All Metal, Clamping Length: 25mm (-1mm), Clamping Depth: 13mm (min.), Thickness Of Metal: 0.22mm (min.), Diameter Of Clip Handles: 1.20mm (min.) 36 box Clip, Backfold, 32mm (box) All Metal, Clamping Length: 32mm (-1mm), Clamping Depth: 14mm (-1mm) Thickness Of Metal: 0.30mm (min.), Diameter Of Clip Handles: 1.45mm (min.) 26 box Clip, Backfold, 50mm (box) All Metal, Clamping Length: 50mm (-1mm), Clamping Depth: 25mm (-1mm), Thickness Of Metal: 0.33mm (min.), Diameter Of Clip Handles: 1.85mm (min.) 252 piece Correction Tape (piece) Disposable, Dispensing Mechanism: Gear Type, Dispensing System: Single Line Tape 21 piece Cutter/utility Knife, For General Purpose (piece) Length: 100mm (+2mm), Width: 16mm (+2mm) Thickness: 0.40mm (+0.02mm) 85 piece Data File Box (piece) Outside Dimension: Width: 125mm (min), Height: 230mm (min), Length: 400mm (min), Material: Chipboard: 3mm Thick (min) 53 piece Data Folder (piece) Dimension: Width: 75mm (min), Height: 230mm (min), Length 380mm (min), Material: Chipboard: 2,5mm Thick (min) 11 piece Dater Stamp (piece) With Locking Mechanism, With Self-inking Stamp, With Removable And Refillable Ink Pad, Single Color, Size Of Imprint: 30mm X 45mm (min) 9 box Envelope, Documentary, A4 (box) 14 box Envelope, Documentary, Legal, (box) Size: 254mm X 381mm (-2mm), Basis Weight: 150gsm (-5%), Thickness (min.): 0.22mm 12 box Envelope, Expanding, Kraft (box) Legal Size: 380mm X 250mm (-3mm), Expansion: 50mm (-3mm), Thickness (min.): 0.38mm 4 box Envelope, Expanding, Plastic (box) 10 box Envelope, Mailing (box) 13 piece Eraser, Felt, For Blackboard/whiteboard (piece) Overall Size (l X W X T) (min.): 125mm X 45mm X 19mm 30 box Fastener, Metal (box) Thickness: Base With Prongs And Compressor: 0.30mm (min.), Material: As Per Sample Provided, Able To Hold 25mm Thick Of Multipurpose Paper (70gsm), 70mm Between Prongs 43 piece File Organizer, Expanding, Plastic, Legal (piece) With 12 Inside Pockets With Index Tab, For Legal Size Paper /documents, Dimension (min.): Cover (flap): Width: 220mm Length: 380mm Thickness: 0.60mm, Inside Pocket: Width: 230mm Length: 360mm Thickness: 0.12mm 49 pack "file Tab Divider, A4, For 210mm X 297mm (a4 Size) Documents, Size (min): Leaf: Length: 297mm Width: 210mm Tab: Length: 65mm Width: 12mm, Basis Weight: 153gsm (-5%), Thickness: 0.22mm (min.) " 37 pack Folder, L-type, Legal, Materials: Plastic, Size: 235mm X 346mm (min.) Thickness: (min.): 0.17mm, Transparent For Easy Identification Of Contents, Assorted Colors 3 box "folder, Pressboard (box) • Material: Heavy Duty Paper Board • Size: 369mm X 242mm (-smm) • Thickness: 0.40mm (min.) • Basis Weight: 312gsm (min.) • Color: Cream, Green Or Maroon, Etc. • Accordion-pleat Gusset: Latex Paper/pvc Bookbinder/book Cloth/paper Cloth, Color: Green, Red, Blue, Expansion: 39mm (-3mm)" 1 pack Folder With Tab, A4, Material: Tagboard/carrier/foldcote/cupstock Board, Leaf Dimension: 240mm X 320mm (+1mm), Tab: 13mm (+2mm), Scoring: 20mm From Edge Of Forlder (+2mm), Other Physical Properties: Grammage G/m²:308 (-5%), Thickness, Mm:0.35 (min), Tearing Resistance, Mn, Md + Cd 2940 (min), Stiffness, Mn.m, (taber) Md + Cd: 13 (min) 45 pack Folder With Tab, Legal (pack) Material: Tagboard/carrier/foldcote/cupstock Board, Leaf Dimension: 240mm X 320mm (+1mm), Tab: 13mm (+2mm), Scoring: 20mm From Edge Of Forlder (+2mm), Other Physical Properties: Grammage G/m²:308 (-5%), Thickness, Mm:0.35 (min), Tearing Resistance, Mn, Md + Cd 2940 (min), Stiffness, Mn.m, (taber) Md + Cd: 13 (min) 27 box "index Tab (box) Transparent, Self-adhesive, Assorted Colors, Five (5) Sets Per Box, One (1) Set Composed Of 2-pieces 6"" Tab Strip And Two (2) Complete Alphabets" 40 piece Magazine File Box, Large, Material: Chipboard: 3mm Thick (min.), Leatherette Paper For Outside Cover, Coated Paper For Inside Cover, Outside Dimension: :width: 110mm (min), Height: 265mm (min), Length: 220mm (min) 36 set Marker, Flourescent (set) Barrel: Flat, Tip: Chisel Point, Color: Three (3) Assorted Colors Per Set, Material And Structure: The Barrel And The Cap Shall Be Made Of Plastic And The Cap Shall Fit Snugly Or Firmly To The Barrel And Of Such Structure That Will Easily Cap And Uncap, Quality: Writing Performance: Flourescent Marker Shall Continuously Highlight On Multipurpose Paper For A Distance Of At Least 100 Meters Under Normal Pressure And Shall Not Show Noticeable Change In Ink Intensity. Cap-off Time: 45 Minutes (min) 225 piece Marker, Permanent, Black (piece) Ink Color: Black, Tip: Felt, Bullet Type, Point: Medium, Structure: The Barrel And The Cap Shall Fit Snugly Or Firmly To The Barrel And Os Such Structure That Shall Easily Cand And Uncap 80 piece Marker, Permanent, Blue (piece) Ink Color: Blue, Tip: Felt, Bullet Type, Point: Medium, Structure: The Barrel And The Cap Shall Fit Snugly Or Firmly To The Barrel And Os Such Structure That Shall Easily Cand And Uncap 86 piece Marker, Whiteboard, Black (piece) Ink Color: Black, Blue, Red, Tip: Felt, Bullet Type, Structure: The Barrel And The Cap Shall Fit Snugly Or Firmly To The Barrel And Of Such Structure That Shall Easily Cand And Uncap 19 piece Marker, Whiteboard, Red, Ink Color: Red, Tip: Felt, Bullet Type, Structure: The Barrel And The Cap Shall Fit Snugly Or Firmly To The Barrel And Of Such Structure That Shall Easily Cand And Uncap 76 box Paper Clip, Vinly/plastic Coated, 33mm (box) Wire Diameter: 0.80mm (min), Length Of Clip: 33mm (min), Total Length Of Wire Used: 102mm (min), Assorted Colors 100 Box Paper Clip, Vinly/plastic Coated, Jumbo, 50mm (box) Wire Diameter: 1.0mm (min), Length Of Clip: 50mm (min), Total Length Of Wire Used: 155mm (min), Assorted Colors 19 Box Pencil, Lead/graphite, With Eraser, Hardness: Hb Or 2, Lead/graphite Diameter: 2mm (min), Wood Casing: Softwood, Coated, Free From Defects As Cross Grains, Interlocked Grains, Warpage Knots And The Like; And Shall Permit Easy Sharpening 11 Piece Pencil Sharpener, Table Mountable Type, With Metal Clamp, Single Cutter-head, One Hole Guide, 9-10mm In A Diameter, All Main Parts Shall Be Made Of Metal Particularly The Cutting Mechanism Cutter,pinion Gear,internal Gear,handle 23 Piece Puncher, Paper, Heavy Duty (piece) Punching Capacity: 30 Sheets Of 70gsm Multipurpose Paper, With Two Hole Guide, Diameter Of Hole: 7mm (approx) 19 Box Rubber Band No. 18 (box) 35o Grams (min) (net Weight), Thickness: 1.00mm (min), Lay Flat Length: 70mm (min), Tensile Strength: 9.81mpa (min), Elongation: 250% (min) 31 Piece Stamp Pad, Felt (piece) Thickness Of Felt: 5mm (min.), Thickness Of Metal: 0.20mm (min.), Stamp Bed Size: Width: 60mm (min.), Length: 100mm (min.) 68 Pair Scissors, Symmetrical/asymmetrical (pair) Overall Length: 160mm (min), Length Of The Cutting Blade: 70mm (min), Thickness Of The Cutting Blade: 1.70mm (min), Length Of Metal Handle (measured From The Center Of The Binding Rivet Screw To The Tip Of The Metal Handle): 35mm (min) 37 Piece Stapler, Standard Type (piece) Loading Capacity: 200 Staples (min), One Time Binding Capacity Of 2-20 Sheets Multi-purpose Paper (70gsm)r 6 Unit Stapler, Heavy Duty (binder) (unit) Type: Desktop, High Capacity/volume, Compatible With The Following Staple Sizes: 13mm And 17mm, Material: Body: Metal, Bases Grip: Non-skid Durable Material, Stapling Capacity: 25-135 Sheets Of 70gsm Multi-purpose Paper, Load Capacity: 100 Staples (min), Throat: Depth: 65mm (min) With Adjustable Paper Guide, Dimension: Manufacturer's Standard 9 Piece Tape Dispenser, Table Top (piece) Net Weight (min.): 1.2kg, Body Made Of Rigid Plastic, Smooth Finish: Weighted, Serrated Cutting Blade Thickness: 0.40mm +0.03mm, Holds Rolls Up To 24mm Wide On 75mm Core, Assorted Color 17 Pack Cartolina, Assorted Colors (pack) Bristol Board, Size: 572mm X 724mm (-3mm), Basis Weight: 100gsm (min.), Thickness: 0.12mm (min.), Assorted Colors: Blue, Green, Yellow, Orange, Lavender, Violet, Gold And Pink, Minimum Of Four (4) Colors 158 Pad "notepad, Stick-on, 50mm X 76mm (pad) Size: 50mm X 76mm (2"" X 3"") (min), Basis Weight: 70gsm (min), Sheet Thickness: 0.09mm (min), Assorted Colors" 175 Pad "notepad, Stick-on, 76mm X 100mm (pad) Size: 76mm X 100mm (3"" X 4"") (min), Basis Weight: 70gsm (min), Sheet Thickness: 0.09mm (min), Assorted Colors" 98 Pad "notepad, Stick-on, 76mm X 76mm (pad) Size: 76mm X 76mm (3"" X 3"") (min), Basis Weight: 70gsm (min), Sheet Thickness: 0.09mm (min), Assorted Colors" 153 Piece Steno Notebook (piece) Basis Weight: 55gsm (-5%) Bond, Thickness: 0.075mm (min), Size: 150mm X 225mm, (min), Top Margin: 25mm (min.), Bottom Margin: 5mm, Number Of Spaces: 22 (min), Cover Thickness: 0.40mm (-0.02mm), 40 Leaves, Ruled Both Sides 40 Bond Paper , Legal, 70 Gsm 40 Ream Bond Paper , A4, 70 Gsm 591 Ream Paper, Multicopy A4 (ream) Basis Weight: 80gsm (-3%), Size: A4, 210mm X 297mm (+2mm In Either Direction), Trim Sizes Shall Be Along Machine Direction Or Long Grain 156 Ream Paper, Multicopy Legal (ream) Basis Weight: 80gsm (-3%), Size: Legal, 216mm X 330mm (+2mm In Either Direction), Trim Sizes Shall Be Along Machine Direction Or Long Grain 419 Ream Paper, Multipurpose A4, Basis Weight: 80gsm (min.), Size: Legal, 216mm X 330mm (+2mm In Either Direction), Trim Sizes Shall Be Along Machine Direction Or Long Grain 93 Ream Paper, Multipurpose Legal, Basis Weight: 80gsm (min.), Size: Legal, 216mm X 330mm (+2mm In Either Direction), Trim Sizes Shall Be Along Machine Direction Or Long Grain 15 Box Paper, Parchment, Size: 210mm X 297mm (+2mm In Either Direction), Basis Weight: 80gsm (-5%), Fine Translucent, Suitable For Laser/inkjet Printing 48 Book Record Book, 300 Pages (book) Basis Wieght: 55gsm (-5%), Thickness: 0.07mm (minimum), Size: L X W: 265mm X 165mm (minimum), Cover Material: Laminated Chipboard, Thickness: 1.5mm (minimum) Size: L X W: 278mm X 175mm (minimum), Margins Top: 25mm (-2mm), Bottom: 8mm (+4mm), Left / Right: Manufacturer's Standard 37 Book "record Book, 500 Pages (book) Basis Weight: 55 Gsm (-5%) Thickness 0.07 Mm (minimum) Size L X W: 265mm X 165mm (minimum) Cover Material Laminated Chipboard Thickness 1.5mm (minimum) Size L X W: 278mm X 175mm (minimum) Margins Top 25mm (-2mm) Bottom 8mm (±4mm) Left / Right Manufacturer’s Standard" 35 Cart Ink Cartridge, Epson C13t664100 (t6641), Black 30 Cart Ink Cartridge, Epson C13t664200 (t6642), Cyan 30 Cart Ink Cartridge, Epson C13t664300 (t6643), Magenta 30 Cart Ink Cartridge, Epson C13t664400 (t6644), Yellow 1054 piece Ballpen 36 pack Sticker Paper , A4, Matte, White, 10 Pcs/pack 21 pack Sticker Paper , Legal, Matte, White, 10 Pcs/pack 25 roll Double Sided Tape 31 pack Photo Paper, A4 Size, Glossy, 10 Sheets/pack 15 packs Photo Paper Legal 4 bottle Disinfectant Bleaching Solution, 3.78 Lit 67 piece Certificate Frame, A4, Orientation: Landscape, Pvc Black 195 piece Certificate Holder, A4, Plastic 1 unit Microphone 74 box Plastic Fastener, Size: Regular (50pcs/box) 14 box Plastic Fastener, Size: Long 2 piece Extension Cord 2 pack Push Pin 12 piece Glue Stick (paste) 5 pack Glue Stick (for Glue Gun) 2 unit Ergonomic Chair, (midback Synthetic Leather Finished Office Chair- Padded Steel Armrest With Heavy Duty Base With Nylon Caster Wheels, With Pneumatic Gaslift For Height Adjustment) 1 unit Executive Chair (for Fo Head) 2 unit Glue Gun 2 unit Speakers 113 bottle Ink Cartridge, Epson 003 Yellow 109 bottle Ink Cartridge, Epson 003 Magenta 109 bottle Ink Cartridge, Epson 003 Cyan 131 bottle Ink Cartridge, Epson 003 Black 10 bottle Ink Cartridge, Hp Gt52 Yellow 10 bottle Ink Cartridge, Hp Gt52 Magenta 10 bottle Ink Cartridge, Hp Gt52 Cyan 10 bottle Ink Cartridge, Hp Gt53 Black 18 bottle Ink, Brother, Black, Btd60bk, 108ml 9 bottle Ink, Brother, Cyan, Bt5000c, 48.8ml 9 bottle Ink, Brother, Yellow, Bt5000c, 48.8ml 6 bottle Ink, Brother, Magenta, Bt5000c, 48.8ml 37 bottle Ink Refill, Epson Ink 001, Black, 127ml 29 bottle Ink Refill, Epson Ink 001, Cyan, 65ml 29 bottle Ink Refill, Epson Ink 001, Magenta, 65ml 29 bottle Ink Refill, Epson Ink 001, Yellow, 65ml 5 Box Sign Pen, Uniball-impact Gel, Ruber Grip, Steel Point, Water-based Pigment Gel Ink 1.0% Ball, Approx 0.6% Line, 12 Pcs/box 58 Piece Sign Penm Black, Gel 0.7mm 12 Piece Sign Pen, Ink Refill, 0.5, My Gel 3 Meter Pdx Loomex Wire 2 Cart Tonner (5501i, No. Tk6309) 12 Packs Notarial Seal Box Notarial Seal (gold), No. 23, 25pcs/box 1 Piece Glass Top Corner Table 2 Piece Steel Filing Cabinet Four Drawers, Vertical 15 Packs Specialty Board, A4 21 Pad Sign Here Sticky Note Pad 30 Packs Specialty Paper, A4 Lot B 58 Bottle Alcohol, Ethyl, 500 Ml, 68% - 72% Ethyl Alcohol, Fully Miscible In Water, Flip-top Cap, Scented 49 Gallon Alcohol, Ethyl, 1 Gallon, , Strength: 68% - 72%, Volume: 1 Gallon, Bottle: Hdpe 51 Can Air Freshener (can) Aerosol Type, Net Content: 150g (min), Assorted Scents (at Least Three (3) Scents), Long Lasting Fragrance (scent Trace Lingers For Atleast 5 Min.) 10 Piece Broom (walis Tambo) (piece)weight: 500 Grams (max), Handle: Plastic Coated Aluminum Tube, Diameter Of Handle: 19mm (min), Length Of Handle: 545mm (min), Dry Weight Of The Tiger Grass: 200grams (min), Usable Length Of Tiger Grass: 300mm (min), With Upper Stitch: 20 (min) Lower Stitch: 30 (min) 5 Piece Broom (walis Ting-ting) (piece) Made Of Mature Coconut Midribs, Standard Size (min.): 140mm Grip, Measured 150mm From The Top,usable Length (min.): 760mm, Rib Count (min.): 350 Pieces 55 Bottle Cleaner, Toilet Bowl And Urinal (bottle) Color: Cear Or Blue, Net Content: 900ml - 1000ml In Rigid Plastic Bottle, Not Chlorine Based, Viscosity: 114cp At 25°c Min Using Ostwald Method 15 Bar Detergent Bar (piece) Net Weight: 140 Grams As Packed (-2.5%) 30 Pouch Detergent Powder, All-purpose, 1kg, Net Weight: One (1) Kilogram (-2.5%) 51 Can Disinfectant Spray (can) Aerosol Type, Net Content Per Can: 400 Grams (min), Crisp, Clean Scent 11 Piece Dust Pan (piece) Made Of Rigid Non-breakable Plastic, With Detachable Handle: Diameter (min.): 30mm, Length (min.): 600mm, Base (min.): Thickness: 1.25mm, Front Width: 260mm, Back Width: 200mm, Depth: 225mm 13 Can "furniture Cleaner (can) Aerosol Type • For All Types Of Surfaces Such As Furniture, Cabinets And Countertops, Vinyl And Leather, Etc. • Net Content (min.): 300mi Per Can • Pleasant Smell. • Sufficient Amount Of Propellant To Totally Expel Content. • Shelf Life: Must Have A Shelf Life Of At Least Twenty-four (24) Months From The Date Of Manufacture But Not Less Than Eighteen (18) Months From The Date Of Delivery" 48 Bottle Hand Soap, Liquid, 500ml (bottle) Mild Scented, Bactericidal/germicidal Property, Individual Packed Plastic Bottle, Packaging: Standard Packaging Of The Manufacture 1 Unit Mop Bucket, Heavy Duty, Hard Plastic, Material: Hard Palstic, Approximate Size (min.), Width: 370mm Length: 475mm Height: 245mm, Capacity: 30 Liters 4 Piece Mophandle, Heavy Duty, Screw Type, Screw Type, With Metal Mop Head Clipper, Aluminum Handle: Thickness (min.): 0.70mm, Outside Diameter: 22mm To 25mm Length (min.): 1.5 Meters 10 Piece Mophead, Made Of Rayon, 36 Stands Per Head (min), 3 Ply's Per Stand, 40 Threads Per Ply, Weight:400 Grams (min), Length: 410mm (min), Length Of Band: 170mm (min), Breaking Strength, Kg: 126 (min) 5 Kilo "rags All Cotton (bundle) Diameter: 178mm (7"") (approx.) Minimum Of Thirty-two (32) Pieces To A Kilogram, Assorted Colors" 7 Pack Scouring Pad (pack) Made Of Synthetic Nylon, 150mm X 200m (min.), Thickness (min.): 8mm, Color: Green 56 Pack/roll "trashbag, Xxl Size (roll/pack) Color: Black, Dimension: 940mm X 1016mm (-6mm) (37"" X 40""), Thickness: 0.02mm (min), Tensile Strength At Break: Astm D882, One Way: 15n/mm² (min), Other Way: 12n/mm² (min), Elongation At Break: Astm D882, One Way: 400% (min), Other Way: 600% (min)" 54 Pack/roll Trashbag, Large Size (roll/pack) 29 Pack/roll Trashbag, Xl Size (roll/pack) 19 Piece Wastebasket, Non-rigid Plastic, Made Of Rigid Plastic, Thickness (min.): 1.20mm, Height (min.): 225mm, Full Volume (up To The Lid): 8.5 Liters (min.), Assorted Colors 44 bottle Dishwashing Liquid Lemon/calamansi 25 pcs Dishwashing Paste, 200g 34 Pack Tissue, Interfolded Paper Towel (pack) Basis Weight: 34gsm (+/-2gsm), Sheet Dimension: Width Of Sheet: 200mm (+3mm), Length Of Sheet: 200mm (+3mm), Total Number Of Sheets Per Pack: 150 Pulls, Interfolded, Number Of Ply: One (1) Ply 164 Pack Toilet Tissue Paper, 2 Ply (pack) , 100% Recycled, 12 Rolls Per Pack, Weight: 28gsm (min.), Sheet Dimension: Width Of Sheet: 100mm (+/-3mm), Length Of Sheet: 114mm (-5mm) 18 Bottle Hand Sanitizer (bottle) Form: Liquid Or Gels, Volume: 500ml, Hypoallergenic, Non-drying, Bottle: Pump Dispenser Plastic, Fda Certificate Of Product Registration/notification 20 Can Insecticide (can) Aerosol, Kerosene Based, Quick Kill Contact And Residual Type, Cautionary Scent/odor Required, Multi-insect Killer, Net Content Per Can: 600ml (min.) 41 piece Toilet Deodorant Cake, Assorted, 100grms 6 Pcs Doormat Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx