Tender Results of Nmdc Steel Limited

CATEGORY: ELECTRICAL CONSUMABLE FIBER GLASS TAPE THICKNESS IN MM: 3 ITEM NO 01 , ELECTRICAL CONSUMABLE FIBRE GLASS SILICONE COATED SLEEVE ITEM NO 02 , ELECTRICAL CONSUMABLE FIBRE GLASS SILICONE COATED SLEEVE SIZE (MM) IN DIAMETER: 70 MM ITEM NO 03

1600416873 Num Rly Micom P3 Schn P343311 3,1600416877 Num Rly Micom P2 Schn P243311 3

Rf Basic Gunning Mass

CATEGORY: HT EPR trailing Cable

CATEGORY: Spare sliding shoe wearing plate

Grinding Wheel Cup Aluminum O 200x100x51

CATEGORY: Leakage Current Meter / Analyser for Surge Arrester (Q2)

" Liner Type: Mn Steel Liner Size (lxwxt) : 300x300x25 Mm Material: Gr. 3 (is 276: 2000) Addition

CATEGORY: 1600322874 BATTERY LEAD ACID 12V 180 1 POLYPROP

CATEGORY: TURNING INSERT CNMG190612 , TURNING TOOLHOLDER PCLNR2525M12 IS 14863 , TURNING TOOLHOLDER PCLNR 3232P19 IS1486 2 , FACING TOOL HOLDER PSSNP2521M12 IS14863 2 , FACING TOOLHOLDER PSDNN2020K12 IS14863 , FACE MILLING INSERT INSCIBED CIRCLE DIAMETER 21 MM , FACE MILLING CUTTER DIAMETER 100 MM ISO 40 , HSS TOOL BIT IS 11143 194 , HSS TOOL BIT IS 11143 1984 , HSS TOOL BIT HOLDER 38 20 , Grooving Tool Holder FOR 3 MM INSERT SHANK WIDTH AND HEIGHT 32MM , Grooving Tool Holder FOR 4 MM INSERT SHANK WIDTH AND HEIGHT 32 MM , Grooving Tool Holder FOR 2 MM INSERT SHANK WIDTH AND HEIGHT 25 MM , GROOVING INSERT 3MM CUTTING WIDTH 3MM , GROOVING INSERT 4MM GROOVING INSERT 4MM , GROOVING INSERT 2 MM CUTTING WIDTH 2 MM CUTTING DEPT MAXIMUM 19 MM , REVOLVING CENTRE MT 5 , DEAD CENTER MORSE TAPER NO MT 4 OUTER DIAMETER MM 18 , DEAD CENTER MORSE TAPER NO MT 5 OUTER DIAMETER MM 18 , HACKSAW BLADE 525 MM X 45 MM HSS IS2594 2003 , ER COLLET HOLDER ISO 40 ER32 , ER COLLET HOLDER ISO 40 ER40 , STUB MILL ARBOUR ISO 40 32MM , DRILL CHUCK WITH SOCKET , ER SPRING COLLET BORE DIA 4MM , ER SPRING COLLET BORE DIA 5 MM , ER SPRING COLLET BORE DIA 6 TO 8MM , ER SPRING COLLET BORE DIA 8 TO 10 MM , ER SPRING COLLET BORE DIA 10 MM , ER SPRING COLLET BORE DIA 12TO 14MM , ER SPRING COLLET BORE DIA 14MM , ER SPRING COLLET BORE DIA 16 TO 18MM , ER SPRING COLLET BORE DIA 20 MM , HSS BALLNOSE END MILL 5 MM , HSS BALLNOSE END MILL 6 MM , HSS BALLNOSE END MILL 10 MM , HSS BALLNOSE END MILL 12 MM , HSS BALLNOSE END MILL 16 MM , BORING TOOL HOLDER Body Diameter 25MM shank Height , BORING TOOL INSERT CCMT Inscribed circle diameter , PARTING INSERT CUTTING DEPTH MAX MM 19 CLEARANCE ANGLE MAJOR DEGREE 7 , PARTING TOOL HOLDER 3 MM SHANK HEIGHT and WIDTH 32 X 32 MM , PARTING TOOL HOLDER 4 MM SHANK HEIGHT and WIDTH 32 X 32 MM , PARTING INSERT CUTTING DEPTH MAX MM , INTERNAL RIGHT HAND THREADING TOOL HOLDER 25 MM , INTERNAL RIGHT HAND THREADING TOOL HOLDER 32 MM , NTERNAL THREADING INSERT INSCRIBED CIRCLE DIAMETER MM 9 point 525 , INTERNAL THREADING INSERT 9 point 525 , INTERNAL RIGHT HAND THREAD INSERT INTERNAL THREADING INSERT , EXTERNAL THREADING TOOL RIGHT HAND 25 MM , EXTERNAL THREADING INSERT 9 point 525