Electrostatic Tender Results

Description: EMITTING ELECTRODES FOR ELECTROSTATIC PRECIPITATORS

Description: TTPS Mech II BM Unit V Overhauling of Electrostatic Precipitator CD path of Unit V for the year 2024

Description: TTPS Mech II BM Unit V Overhauling of Electrostatic Precipitator AB path of Unit V for the year 2024

Description: Electrostatic Paint Guns and Carts

Page 3 Of 3 sources Sought Synopsis the Department Of Veterans Affairs Is Issuing This Sources Sought Synopsis As A Means Of Conducting Market Research To Identify Firms Having An Interest In And The Resources To Support A Requirement For It Workbenches At The Captain James A Lovell Federal Health Care Center (fhcc). The Result Of This Market Research May Contribute To Determining The Method Of Procurement. The Tentative North American Industry Classification System (naics) Code Assigned To This Procurement Is 337127 Institutional Furniture Manufacturing. there Is No Solicitation At This Time. This Request For Capability Information Does Not Constitute A Request For Proposals; Submission Of Any Information In Response To This Market Survey Is Purely Voluntary; The Government Assumes No Financial Responsibility For Any Costs Incurred. tentative Requirements 23 Workstations: 72" Wide X 30" Deep X 72" High (2) 2in. Twin Casters (non-locking) (2) 2in. Twin Casters (locking) (2) Legs (2) Uprights 72"w X 30"d Work Surface W/electrostatic Dissipative (esd) Laminate 30" High From The Floor 16"h X 16"d 4-door Flipper Cabinet W/key Locks & Esd Laminate (2) Monitor Holders On A Horizontal Rail (5) Cork Boards On Sides And Rear 3-side Full Modesty Panels W/esd Laminate full Length Wire Management Tray (2) Double 3-prong Power Receptacles 8 Workstations: 96" Wide X 30" Deep X 72" High (3) 2in. Twin Casters (non-locking) (2) 2in. Twin Casters (locking) (2) Legs (3) Uprights 96"w X 30"d Work Surface W/electrostatic Dissipative (esd) Laminate 30" High From The Floor 16"h X 16"d 4-door Flipper Cabinet W/key Locks & Esd Laminate (3) Monitor Holders On A Horizontal Rail (7) Cork Boards On Sides And Rear 3-side Full Modesty Panels W/esd Laminate full Length Wire Management Tray (2) Double 3-prong Power Receptacles if Your Company Has The Potential Capacity To Provide These Products, Please Provide The Following Information:1) Company Name, Address, Email Address, Web Site Address, Telephone Number, Sam Uei, And Size And Type Of Ownership For The Company; 2) Tailored Capability Statements Addressing The Workbenches Offered, Product Lead Times, Whether The Products Are Made In The Usa, And Information Relevant To The Suitability Of Products For Repair Of Sensitive Electronics; And 3) Confirmation Your Company Can Meet The Limitations Of Subcontracting Should They Apply (see Below) the Government Will Evaluate Market Information To Ascertain Potential Market Capacity To Provide Services Consistent In Scope And Scale With Those Described In This Notice And Otherwise Anticipated. based On The Responses To This Synopsis And Other Market Research, This Requirement May Be Set-aside For Veteran-owned Small Businesses (sdvosbs Or Vosbs) (limitation Of Subcontracting Would Apply), Small Businesses (limitations On Subcontracting Would Apply) Or Procured Through Full And Open Competition. submission Instructions: Vendors Interested In Providing This Equipment Are Invited To Submit A Response To This Sources Sought Notice By 10:00 Am Local Time On October 30, 2023. All Responses Under This Sources Sought Notice Must Be Emailed To Brandon.harris@va.gov. Telephone Inquiries Will Not Be Accepted Or Acknowledged, And No Feedback Or Evaluations Will Be Provided To Companies Regarding Their Submissions.

Description: 750504510017: HAND GLOVES FOR BATTERY INSPECTION: SUPER NITRILE AND GLOVES (SELF-LIFE 01 YEAR) RNF-15 ELECTROSTATIC

Item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| inspection Of Supplies--fixed-price (aug 1996)|2||| time Of Delivery (june 1997)|20||||||||||||||||||||| stop-work Order (aug 1989)|1|| wide Area Workflow Payment Instructions (jan 2023)|16|combo||hq0337|n00104|s3110a|tbd|see Schedule|see Schedule|||tbd|||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|| equal Opportunity (sep 2016)|2||| small Business Subcontracting Plan (dod Contracts)- Basic (dec 2019)|2||| integrity Of Unit Prices (nov 2021)|1|| small Business Subcontracting Plan (oct 2022)|4||||| equal Opportunity For Workers With Disabilities (jun 2020)|2||| buy American --free Trade Agreements--balance Of Payments Program - Basic (jan2023))|3|||| list Of Award Attachments|5|||||| alternate A, Annual Representations And Certifications (nov 2020)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (dec 2022))|3|||| buy American-balance Of Payments Program Certificate-basic (nov 2014)|1|| annual Representations And Certifications (mar 2023)|13|334290|750|||||||||||| type Of Contract (apr 1984)|1|firm Fixed Price (ffp)| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||x| amendment Hereby Extends The Offer Due Date To 30 June 2023. all Other Terms And Conditions Remain The Same. \ amendment 0002 Hereby Extends The Offer Due Date To 15 June 2023. all Other Terms And Conditions Remain The Same. \ amendment 0001 Hereby Extends The Proposal Due Date To 31 May 2023. all Other Terms And Conditions Remain The Same. \ the Resultant Award Of This Solicitation Will Be Issued Bilaterally, Requiring The Contractor's Written Acceptance Prior To Execution. please Quote A Firm Fixed Price For The Item. Do Not Include The Cost For Shipping Material. Freight Is Fob Origin. dcma Source Inspection And Acceptance Is Required. required Shipping Procedure Is Military Packaging And Bar Coding. 1. If You Are Not The Manufacturer Of The Material You Are Offering, You Must State Who The Manufacturing Is (name & Cage Code) And Be Able To Provide Traceability Information If Requested Prior To Receiving An Award. The Evidence Must Be Submitted Within 2 Days, or As Otherwise Specified, Or The Offer May Not Be Considered. 2. By Submitting A Quotation Or Offer, The Contractor Agrees That, When The Contractor Is Not The Manufacturer Of The Item, It Is Confirming That It Currently Has Or Will Obtain Before Award And Shall Retain Documented Evidence (supply Chain Traceability documentation) That The Item Is From The Approved Manufacturer And Conforms To The Technical Requirements. The Retention Period Is Five Years After Final Payment Under This Contract. 3. At A Minimum, The Supply Chain Traceability Documentation For The Item Shall Include: Basic Item Description, Part Number And/or National Stock Number, Manufacturing Source, Manufacturing Sources Commercial And Government Entity (cage) Code, And Clear identification Of The Name And Location Of All Supply Chain Intermediaries Between The Manufacturer To The Contractor To Item(s) Acceptance By The Government. The Documentation Should Also Include, Where Available, The Manufacturer's Batch Identification For The time(s), Such As Date Codes Lot Codes, Or Serial Numbers As Date Codes Lot Codes, Or Serial Numbers. 4. Examples Of Traceability Information/documentation: The Invoice Received By The Offeror From The Approved Source Ie. Oem Or From An Authorized Dealer/distributor For The Approved Source. Or A Letter/official Email From The Oem Confirming Offeror Is Authorized to Resell Their Items. Or The Packing Slip That Accompanied The Shipment To The Offeror/ Contractor From The Approved Source, Or From An Authorized Dealer/distributor For The Approved Source. \ 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Manufacture And The Contract Quality Requirements For The Synthesizer,electri . 2. Applicable Documents - Not Applicable 3. Requirements 3.1 Cage Code/reference Number Items - The Synthesizer,electri Furnished Under This contract/purchase Order Shall Be The Design Represented By Cage Code(s) reference Number(s). Cage _______ Ref. No. ;02769 8567960; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-130, Rev N, 16 Nov 2012; . 3.3 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Part Number Change Only - If The Manufacturer's Part Number Indicated Thereon Has Changed, But The Parts Are Identical In All Respects, Supply The Item And Advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts. code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New. code 6: Part Redesigned - Parts Not Interchangeable. 3.4 Electrostatic Discharge Control - The Contractor Shall Comply With The Electrostatic Discharge Control Requirements Established In Mil-std-1686. 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer. 6.3 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161.

Routine And Breakdown Maintenance Of Electrostatic Precipitator And Breakdown Maintenance Of Pc Pipe (pulverized Fuel Pipe)

Description: SUPPLY of electrostatic PAINT, SYNTHETIC ENAMEL, RED a) STANDARD: IS - 2932 (Part 1) - LATEST b) SH

Description: Supply, installation, commissioning and Training of Electrostatic Discharge Simulator (ESD) .