Fabrication Tenders

Description: P.l. No.98051301 Condemned And Unserviceable Ferrous With Aluminium Attachments Scrap Consisting Of Rotors With / Without End Shields, Chokes Of Tube Lights ,pw Trolley Wheel Sets / Axles / Parts, Aluminium Caps Of Tube Lights And Filament Lamps With / With Out Glass , Filaments And Other Orginal Attachments , Ferrous Cores Released From Feild Coils Of Traction Motors ,ceiling Fan Rotor Core , Acsr Conductors Cut Bits With Porcelan Attachments, Wra Compressors , Pistons With Connecting Rods ,solar Panels,rope Connector, Terminal/junction Boxes, Reflectors Of Light Fittings, Mechanisms Of Circuit Breakers With Porcelain Bushings, Pipes / Hoses Of Ferrous Or Pvc / Pipe Fittings With / Without Wires / Cables, Lock Levers Of Covers, Signal Arms, Parts Of Medical Eqiuipments, Oil Engine Parts, Filters (oil/air), Gauges / Levels, Wire Ropes, Rectifier Cum Regulator Boxes, Sign Boards, Cross Arms, Fabricated Boxes / Plates / Sheets, Dust Bins, Fuse Distribution Boards, Eft Boxes, Panel Boards, Control Gears, Clevis, Lamp Fittings, Dental Chair, Wiper Blade, Loco / Lavatory Doors, Window Frames Of Sorts And Sizes And Other Similar Engineering / C & W / Loco / Electrical / Signal/medical Components Ferrous In Nature With Aluminium / Brass / Copper / Stainless Steel / Fibre / Wood / Hylam / Plastic / Pvc / Rubber / Mica /electrical Wires/cables/ Glass Attachments In Full / Part / Broken Condition. As Is Where Is Basis. Segregation And Removal Attachements Not Permitted. Note:- (1) Cssd/goc Electronic Weigh Bridge To Be Used For Weighment. (2) Loading By Crane/jcb Is Permitted.

Description: "scrap U/s Rusted And Corroded Material After Digging From Narayan Ganj Carriage Workshop Ajmer Such As Rails, Rods, Bars, Tor Rod, Misc. Cutting Bits, Ms / Wi Nuts, Screw, Bolts, Pins, Pcs. Of Coil Springs, Erc, Brake Head, Anchor Link With Or Without Silent Block, Brake Shoe, Cotter, Main Bearing Shell, Inner Outer Races, Angle, Channel, Girder, Pedestal, Tie Bar, Ladders, Flats, Channel/angle Of Wagons And Fabricated & Riveted Structural Material Of Angle, Channel, Girder, Inner And Outer Coil Spring, Dynamo Body, Armature Body, Eleptical Spring, Tension Rod Spring, Snubber Spring, Cast Iron Signalling Material, Signalling Point Machine With Motor With Or Without Parts And Fitting With Nf Attachment If Any, Cast Steel Comprising Of Nj/wj Adopter, Buffer, Knuckle, Buffer Plunger, Shafts, Icf Coach Parts, Casing, Bg/mg Axle Boxes/hosing, Cpc Top/bottom, Coupling, Saddle, Collars, Brake Disc, Gears, Ecc Outer Drum, Ms, Gi, Ci Pipes, Signal Post And Fabricated Material Of Pipes Various Sort-various Sizes With Integral Nf, Rubber Attachment Of Minor Nature, Plate, Plate Cutting, Bearing Plate, Gauge Tie Plate, Water Tank Plate, Sliding Chair, Lerries, Misc. Bolts, Hangers, Shackle, Buffer Spindle, Pull Rods, Fish Plate, Lever Plates, Ms/wi Shafts, Flats, Square Bars, Stretcher Bars, Cut Pcs. Of Bars, Bg/mg Hooks, Screw Coupling Other Parts & Fitting, C I Pulley Of Sorts And Sizes With Attachment If Any. Various Type Of Brake Beam With Or Without Attachment Of Safety Wire Rope, Actuating Rods, Brake Lever, Shaft, Ci / Fibre Brake Blocks, Rubber Pad, Elastomeric Rubber Pad, Rubber Buffer Spring, Sandwich Mounting Pads, Mounting Pads, Rollers Of Sorts And Sizes. Structural Material Of Angle, Channel, Pipe Etc. Almirah, Bins, Rmpu Frame, Headstock, Trolley Wheel Sets , Released Tanks, Blowers Frames, Rakes, Condenser Motor Frames, Junction Boxes, Doors, Windows, Rectifier Boxes, Battery Boxes, Hand Trolleys, Cooler Bodies, Fancying Frame, Gates, Junction Box, Gear Case, Locker, Light Melting Material Consisting Of All Type Of Rusty Material Such As Broken Drums, Tube Light Fittings, Corroded Gi Sheets, Cut/open Mouth Paint Drums, Corroded Pan/bucket, Sign Board, Coal Tar Drums, Barrels, Fan Guard, Corroded Wagon Sheet, Carriage Items, Plate Lerries, Pcs. Of Angle, Channel, Corroded Released Rods, Broken Pcs. Of Pipe, Wire, Rope, Cooler Bodies, Bicycle, Lamps, Filters, Boxes & Other Rusty & Corroded C & W, Icf Bogies And Their Parts And Fittings, Air Reservoir Tank With Sort And Sizes With Nf Attachment If Any. Note: (1) Wheels, Tyre, Axle And Wheels Sets Found In Lot Will Not Be Delivered. (2) Intact Non Ferrous Item Will Not Be Delivered. (3) Hammering Is Allowed At The Time Of Delivery. First Remove Material From Bin No. 907 And 908. Location: Bin No. 907 To 908 And Opp. Bin No 122 To 127 "

Description: CATEGORY: TMT bar FE 550 grade 8mm dia , TMT bar FE 550 grade 10mm dia , TMT bar FE 550 grade 12mm dia , TMT bar FE 550 grade 16mm dia , Binding wire of 0.9mm dia , Plywood 8 feet x 4feet x 18mm BWR Grade , Pre fabricated Mild steel Door size 3000mm x 2400mm as per technical specification , Pre fabricated Mild steel Door of size 1500mm x 1830mm , APP Bitumen Membrane sheet of Grade 2504 thickness 3 point 0mm type film size 20mx1m , Deck sheet curved shape 1 point 20mm TR 50 , Quick setting compound , Water Proofing Compound in 1 Kg packing , Fire resistance paint for internal surface , Fire Resistance primer for internal wall surfaces , Synthetic enamel painting to steel surfaces As specified , Red oxide primer , Bitumen 80 oblique 20 grade , HDPE Pipe Rain water pipe 75mm dia , Fire extinguisher A B and C type portable Net 2 Kg capactiy cylindrical , Solar lantern , Lighting conductors complete set , Prefab steel MS plate of size 1000x1000x4mm to frame of size 1050x1050mm , HDPE Hose pipe 25mm dia , 1HP Petrol water pump of capacity 35cc 4 stroke pertol engine 25mm self priming water pump set , PCC Solid block 400x200x200mm plus minus 10mm minimum strength 50Kg oblique Sqcm , 100mm thick interlocking tiles , Cement PPC oblique OPC 53 grade in poly bag of 50 Kg each , Sand Coarse , Stone Aggregate Coarse 20 mm , Stone Aggregate Coarse 40 mm , 02 x Skilled labour Charge , Hesco basket Portable as per drawing attached , Transparent pipe 5mm dia bore for water leveling , Iron bar 600mmx16mm , Industrial safety helmet , Hammer weight 500 gms with wooden handle , Plaster trowel with wooden handle , Fish line , Plumb bob iron , Galvanised iron pan mortar Tasla 18 gauge 16 inch dia , Rammer earth with handle , Picks axes with chiesel and point ends Kudali 14 CP , Showel square nose 14 gauge blade size 310 x 245mm shaft size 710mm fitted , Painting brush 100 mm , Synthetic Tarpaulin 550 GSM of size 30ft x 30ft green , Multipurpose non slip rubber reusable gloves , Brick trowel steel 305 mm , Heavy duty openable props oblique scaffolding made of MS pipe of 60 and 48mm dia , MS Centering plates of size 90cm x 60cm of thickness 14 guage with two stiffeners , Portable MS body Needle Vibrator Machine with power 3 HP to 5 HP petrol engine

Description: P.l. No. 98090719 Condemned And Unserviceable Magnetic Stainless Steel Scrap Consisting Of Trough Floor Sheets, Plates / Sheets Of Plain / Fabricated, Folding Strips / Plates Of Coach Berths, , Wire Ropes,springs Of Brush Holder Assemblies, Parts Of Bio-toilet Such As Wheels ,ss Trap And Wire Ropes, Resistance Banks / Resistance Grids Of Locos, Frames Of Mirror , Relay Clips, Angles, Channels,bellow, Exhaust Manifold Parts, Meshes, Rings, Air Filters, Bowl,magazine Bags,berth Strap, Gas Stove ,platform Chairs, Loco Cabin Chairs, Non-magnetic Trough Floor Sheets With Ferrous Plates / Channels Attachments, Hand Rails, Multi Wings / Resistance / Heating Elements, Dust Bins, Dust Bin Holders,water Purifier /cooler Body ,oven ,exhaust Fan Frame ,light Fitting Frames, Coach Partition Frames With Mica And Fiber Attachments , Mini Steel Tables And Stools , Foot Step Assembly ,ss Wires, Switch Plates , Rice Cooker, Idle Cookers , Utensils Such As Hot Boxes , Flask , Inlay With Ferrous /rubber Attachments ,grease Cleaning Tank, Ac Coach Doors,mug, Exhaust Pipes / Bends With Or Without Bellows, Brackets,pipes / Tubes With / Without Cocks / Fittings / Hose, , El Box , Liquid Receivers With Non-magnetic Stainless Steel Portion And Similar Materials Stainless Steel In Nature With / Without Ferrous, Copper / Brass, Wood, Rubber, Fibre, Porcelain, Wires, Plastic Attachments. As Is Where Is Basis. Cssd / Goc Electronic Weigh Bridge To Be Used For Weighment. Note:- 1) Loading By Crane Is Permitted.2) Segregation And Removal Of Attachments Not Permitted.

Description: Construction, Testing And Commissioning Of Steel Fabricated Structure 15 Nos. Of 10 Kl Capacity Staging 9 Mtr. Including Construction Of Suitable R.c.c. Valve Chamber In Village . Providing, Laying, Jointing, Interconnection, Testing And Commissioning Of 63 Mm Dia Hdpe Class 10 Kg/sqcm Of 1350 Mtr. Valve Specials And All Fittings Including All Allied Civil Works, Supplying & Installation Of Energy Efficiant Five Star Bee Rating Isi Marked Required Capacity Three/single Phase, 50 Hz, 415v, Deep Well Submersible Pump Stainless Steel Body, Suitable For 4"/6" Tube Well With Control Panel Starter Suitable For Submersible Pump With Dry Run Protection, Connections, Including Clamps, Bore Cap Etc 15 Nos. As Required As Per Specifications But Excluding Pipe, Ss/nylonwire Rope And Connection Cable Including Verification Of Tube Well Yield. & Electric Connection From Cseb, Construction Of Brick Masonry Switch Room Of Size 1.50*1.50*3.00 Mtr (15 Nos), Providing 0 No Functional Household Tap Connection (f.h.t.c) (pe-al-pe Pipe 0 Mtr) In Individual Households And Government Instiution Etc.drilling Of 150 Mm Dia 130 M Deep Ordinary Tube Well 15 Nos. Complete With Trial Run Operation & Maintanance For 03 Months Under Single Village Piped Water Supply Scheme Under Jal Jeevan Mission For Village Bhadu, Bahora, Marangi, Samarbar, Sanna & Gurmhakona In Block Bagicha District – Jashpur.

Description: CATEGORY: LV3 ICVS 466-090H BOLT , LV3 ICVS 2815-012340 EXHAUST CAM SHAFT DRG NO 20-07-15A , LV3 ICVS 5325009444 LOCKING RING DRG NO 20-05-160 , LV2 RCV GOST-792-67 WIRE KOO 5 , LV2 ICVS 3020-015712 675-50SB158 GUARD MECHANICAL DRIVE 675-50-SB158 , LV2 ICVS 4710-005164 765-08-SB376 PIPE ASSEMBLY , LV2 ICVS 2510-001448 675- 47-SB124 MUD GUARD REAR RH FOR BMP-II ONLY , LV2 ICVS 5331720321384 765-12-28 PACKING RING , LV2 ICVS 765-08-SB358 HOSE , LV2 ICVS ADY3-05SB PRESSURE REDUCING VALVE ASSY , LV2 ICVS 5140-000284 765-50- 867 OR 765-50-2958 RETAINER MPRE FABRICATED , LV2 ICVS 5330720117821 765-50-2349 GASKET , LV2 ICVS 4820-004382 765-84SB-210 VALVE ASSY , LV2 ICVS 2510002123 675-58-133 RING LOWER RAC , K9 BMP NBC 5330-395419 SEALING GASKET 675-71-285 , K9 BMP NBC 4710-042890 675-71-SB213 PIPE OR TUBE 675-71-SB213 , K9 BMP NBC 4720-015346 3134-01-17 CORRUGATED PIPE

Details: Bench-desk 1. Bench-desk Size- 5ft Length X 3ft Width X 2ft 6inch Height 2. Desk Top Size- 5ft Length X 1ft 4inch Wide 3. Bench Seat-5ft Length X 1ft Wide 4. Bench Back-5ft Length X 10inch Wide 5. Shelf-5ft Length X 12inch Width 6. Desk Height- 2ft 6inch Height 7. Bench Height- 1ft 5inch Height major Specification 1. Mdf Board (is 14587) To Be Used On Top, back And Desk Of 18 Mm Thickness 2. Mdf Board To Be Affixed On Steel Frame Of 1sq. Inch(14 Gauze). Steel Frame As Per Is 7138 3. Colour Of Mdf Board Should Preferably Be blue 4. Rates To Be Provided Inclusive Of All Taxes, fabrication, Carpenter & Carriage Cost.

Details: Description:- 1.marking And Cutting Of 25 Mm Plate, Channels, Angles To Size As Per The Existing structure2.fabricatingthebaseframewithrequiredmountingsupportsfromthefloorlevel 3.matching Of Escapement Arm, Shaft With Bearings. 4.fabrication Of Kicker/escapement Assembly supporting Base Structure. 5.removal Of The Existing Loader After Removal Of Pneumatic Cylinder And pneumatic Connections 6.cleaning The Area Of All Accumulated Debris. 7.fixing Of Fabricated Structure in Place With Rigid Foundation And Align The Escapement Arm With Both Receiving And Dis-charging end Conveyor After Assembly Of Shaft And Bearings With Back Stopper Arrangement. 8.connecting The pneumatic Cylinder, Valves And Pipeline To The New Loader Station With A Frl Unit. 9.full Weld The completestructurewithsupports.provideguiderails,flangeguidesinplace.10.checkthe equipment With Wheel For Smooth Flow Of Wheels And Weld Limit Switch Bracket For Fixing Electrical limit Switches At Required Places For Auto Mode. 11. Paint The All Replaced Structures, Column With onecoatofred-oxideand2 Coats Of Apple Green Paint. Note: A) All Mounting Holes For Pivot bearings, Adjustable Guides, Cylinders Should Have Drilled Holes. B) All Pneumatic Pipe Lines Should Be clamped Using Suitable Pipe Clamps. Rates Are Inclusive Of Gst

Details: Description:- 1.marking And Cutting Of 25 Mm Plate, Channels, Angles To Size As Per The Existing structure2.fabricatingthebaseframewithrequiredmountingsupportsfromthefloorlevel 3.matching Of Escapement Arm, Shaft With Bearings. 4.fabrication Of Kicker/escapement Assembly supporting Base Structure. 5.removal Of The Existing Loader After Removal Of Pneumatic Cylinder And pneumatic Connections 6.cleaning The Area Of All Accumulated Debris. 7.fixing Of Fabricated Structure in Place With Rigid Foundation And Align The Escapement Arm With Both Receiving And Dis-charging end Conveyor After Assembly Of Shaft And Bearings With Back Stopper Arrangement. 8.connecting The pneumatic Cylinder, Valves And Pipeline To The New Loader Station With A Frl Unit. 9.full Weld The completestructurewithsupports.provideguiderails,flangeguidesinplace.10.checkthe equipment With Wheel For Smooth Flow Of Wheels And Weld Limit Switch Bracket For Fixing Electrical limit Switches At Required Places For Auto Mode. 11. Paint The All Replaced Structures, Column With onecoatofred-oxideand2 Coats Of Apple Green Paint. Note: A) All Mounting Holes For Pivot bearings, Adjustable Guides, Cylinders Should Have Drilled Holes. B) All Pneumatic Pipe Lines Should Be clamped Using Suitable Pipe Clamps. Rates Are Inclusive Of Gst

Details: Description:- Supplyandfabrication Of Any Steel Bridge Members For Repairing/strengthening Or modification Of Bridge Girders By Providing Plate Etc Or Any Other Steel Member For Provision Of inspectionfacilitiessuchasplatformetcmadeupofmsplate,angle,channelsofdifferent dimensions Including Painting With One Coat Of Ready Mixed Zinc Chromate Conforming To Is: 104 followed By One Coat Of Ready Mixed Zinc Chromate Red Oxide Conforming To Is: 2074 On The Contact surface Of New Members And One Thick Coat Of Ready Mixed Zinc Chromate On The Contact Surface Of existing Members. All Ms Section Shoud Confrm To Is: 2062 E 250b0 . Fabrication To Be Done As Per existing Or As Per Approved Drawing Or As Per Instruction Of Engineer In Charge. The Rate Shall Include supply And Cutting Of New Steel Section, Drilling For Rivetting/bolting, Assembling/fixing Of Members initially By Service Bolts & Nuts And Finally By Rivetting/hsfg Bolts & Nuts With Dti Washer Etc Or By welding Or As Directed By Engg. In Charge With All Tools, Plants, Labour, Consumables, Machineries And accessories Etc. The Work Will Be Executed As Per Irs: B1-2001 And Irbm With Latest Corrigendum.