Fabrication Tenders

Details: Description:- Supply,fabricationanderectionofsteelmemberstoreplaceexistingcorroded members Of Built Up Section Made Up Of Ms Plate, Angles, Channels Of Different Thickness And Sizes including Painting With One Coat Of Ready Mix Paint Zinc Chromate Priming To Is:104 Followed By One coat Of Ready Mix Paint Red-oxide Zinc Chrome Priming Paint To Is:2074. Structural Steel Should conform To Is:2062 E250- Grade'b0'. Fabrication And Erection To Be As Per Existing Design Initially By bolts And Nuts And Finally By Rivetting During The Sanctioned Traffic Block. Rate Includes Cutting Of New steel Work, Removal Of Rivets By Drilling, Dismantling Of Any Existing Members Required For Inserting fabricatedmembers,fixingofnewfabricatedbuiltupmemberswithalltools,plants,labour, consumables, Machinery And Accessories Etc. Work Will Be Executed As Per Irs:b 1-2001. Note: painting Shall Be Paid Extra Under Relevant Item.

Details: Description:- Supply,fabricationanderectionofsteelmemberstoreplaceexistingcorroded members Of Built Up Section Made Up Of Ms Plate, Angles, Channels Of Different Thickness And Sizes including Painting With One Coat Of Ready Mix Paint Zinc Chromate Priming To Is:104 Followed By One coat Of Ready Mix Paint Red-oxide Zinc Chrome Priming Paint To Is:2074. Structural Steel Should conform To Is:2062 E250- Grade'b0'. Fabrication And Erection To Be As Per Existing Design Initially By bolts And Nuts And Finally By Rivetting During The Sanctioned Traffic Block. Rate Includes Cutting Of New steel Work, Removal Of Rivets By Drilling, Dismantling Of Any Existing Members Required For Inserting fabricatedmembers,fixingofnewfabricatedbuiltupmemberswithalltools,plants,labour, consumables, Machinery And Accessories Etc. Work Will Be Executed As Per Irs:b 1-2001. Note: painting Shall Be Paid Extra Under Relevant Item.

Details: MTPS- II – Mill Plant Division – Reconditioning of pin bolt, Pin bolt inserting bore of the roller tyre holding yoke frame assembly, Roller tyre RTD cover plate, worn out surface of loading frame assembly, hydraulic shaft tension rods, Renewal of worn out coal pipes, dismantling of flanges from old coal pipes & welded with new coal pipes, collar seating worn out portion of 90˚ & 90˚+ 65˚ coal bends, hard facing of dia 600 mm old coal bend, worn out seal cover seating distance spool piece flanges, Fabrication & replacement of worn out Deflector cone and coal feeding centre pipe (partial length) at inner side of classifier assembly etc… in coal mill – F/H.

Details: CATEGORY: Upgradation of walls by customized decorative artistic acrylic coatings , Rerouting and concealing of drinking water and washing area water pipe lines pipe lines , Material and labour for Cantilever platform for filling of water using sold base and top , Material and labour for MS fabrication work for extension of customized top roof with steel pipe and angle frames , Supply and fixing of corrugated galvalume sheet for ridge and eaves gutter , Supply and fixing of plain galvalume sheet for roof ridge and eaves gutter , Provision of rain water drain , Aluminium partitioning of door and sliding window using powder coated sections , Material and labour for VOX panelling for ceiling , Provision of decorative modular light fittings with renewal of internal cables etc , Supply and fixing of stainless steel sink , Material and labour for customized cabinet door wash basin area , Customised Shelf Cabinet

Details: Cannel/Drain Crossing work by 150 mm dia MS carrier pipe & 300 mm dia casing pipe by Jack pushing method on the road SH-8 from Beliatore towards Chandar inetrconnection of MS carrier pipe with UPVC pipeline including fabrication of MS pipe & allied works and laying different dia proposed extra HDPE line to be laid at mouza Beliatore city, Natungram, Challa, Dangar para for Augmentation of Beliatore Water Supply Scheme under JJM under Bankura Sadar Sub-Division of Bankura Division, P.H.E. Dte. Location of Cannel/Drain Crossing Site - (I) At Chainage 3.175 KM to Chainage 3.300 KM of SH-8 (II) At Chainage 1.444 KM to Chainage 1.600 KM of SH-8 (III) At Chainage 1.122 KM to Chainage 1.150 KM of SH-8

Description: Construction, Testing And Commissioning Of Steel Fabricated Structure 20 Nos. Of 10 Kl Capacity Staging 9 Mtr. Including Construction Of Suitable R.c.c. Valve Chamber In Village . Providing, Laying, Jointing, Interconnection, Testing And Commissioning Of 63 Mm Dia Hdpe Class 10 Kg/sqcm Of 1800 Mtr. Valve Specials And All Fittings Including All Allied Civil Works, Supplying & Installation Of Energy Efficiant Five Star Bee Rating Isi Marked Required Capacity Three/single Phase, 50 Hz, 415v, Deep Well Submersible Pump Stainless Steel Body, Suitable For 4"/6" Tube Well With Control Panel Starter Suitable For Submersible Pump With Dry Run Protection, Connections, Including Clamps, Bore Cap Etc 20 Nos. As Required As Per Specifications But Excluding Pipe, Ss/nylonwire Rope And Connection Cable Including Verification Of Tube Well Yield. & Electric Connection From Cseb, Construction Of Brick Masonry Switch Room Of Size 1.50*1.50*3.00 Mtr (20 Nos), Providing 0 No Functional Household Tap Connection (f.h.t.c) (pe-al-pe Pipe 0 Mtr) In Individual Households And Government Instiution Etc.drilling Of 150 Mm Dia 130 M Deep Ordinary Tube Well 20 Nos. Complete With Trial Run Operation & Maintanance For 03 Months Under Single Village Piped Water Supply Scheme Under Jal Jeevan Mission For Village Chalni, Dumarkona & Morangi In Block Bagicha District – Jashpur.

Description: Released, Condemned And U/s Scrap Lettice Type Lighting Tower Fabricated By Iron Angles And Channels, Qty- 32.149 Mt, Location- (1) Up Yard (near Trd Mast Km 2017), (2) Up Yard Puliya K Age (near Trd Mast Km 2027), (3) In Front Of Sse/cable/telecom/ii (micro) (near Trd Mast Km 1149), (4) In Front Of Sse/cable/telecom/ii (micro) (near Trd Mast Km 4012), (5) Behind Dshed, Front Of Elect. Trip Shed (near Trd Mast Km 4026), (6) Behind Dshed Near Trd Mast No.1275 (near Trd Mast Km 4035), (7) In Front Of E Cabin (near Trd Mast No. 1331), (8) Behind Badiline Qtr. 199 At Pf1 (near Trd Mast Km 1016), (9) Pf 7-6 Nad End (near Trd Mast Km 1260), (10) Behind Iocl Pf 7 End (near Trd Mast Km 1218), (11) Between 572 Wll & New Ssp Of Sailana Overbridge (near Trd Mast Km 1060), (12) Inside Down Yard Area (near Trd Mast Km 1088), (13) Near Down Yard Master Office (near Trd Mast Km 1128). Mode Of Delivery By Actual Weighment Basis And On As Is Where Is Basis, Custodian- Sse-p-rtm, Fdp-80 Days.

Details: Description:- Supply,fabricationanderectionofsteelmemberstoreplaceexistingcorroded members Of Built Up Section Made Up Of Ms Plate, Angles,channels Of Different Thickness And Sizes including Painting With One Coat Of Ready Mix Paint Zinc Chromate Priming To Is:104 Followed By One coat Of Ready Mix Paint Red-oxide Zinc Chrome Priming Paint To Is:2074.structural Steel Should conform To Is:2062 E250-grade'b0'.fabrication And Erection To Be As Per Existing Design Initially By bolts And Nuts And Finally By Rivetting During The Sanctioned Traffic Block.rate Includes Cutting Of New steel Work,removal Of Rivets By Drilling ,dismantling Of Any Existing Members Required For Inserting fabricatedmembers,fixingofnewfabricatedbuiltupmemberswithalltools,plants,labour tools,plants,labour,consumables,machinery And Accessories Etc.work Will Be Executed As Per Irs:b 1- 2001. Note: Painting Shall Be Paid Extra Under Relevant Item.

Description: Bazaar Scrap : Actual Lot No.03122502 0100, Pl No.98050047. (15) (hsn Code: 720410-gst At 18% On Fcm Basis) Cond. Badly Rusted And Corroded Us Ms Bazaar Scrap Of (a) Fiber Location Boxes, Paint Drums, Grease Barrels Oil Barrels, Panto Strips, Oil Filters, Anti Monkey Device, S Type Chair Pcs, Furniture Scrap, Galvaline Sheet Pcs, Gutter Sheet Pcs, Loco Side Wall Filters And Miscellaneous Similar Items. (b) Fabricating Scrap, Ec Boxes, Ms Doors, Angle Pieces, Trolley Frames, Molb Pcs, , Iron Brake Blocks, Chutes, Gi Binding Wire, Binding Wire, Strips, Guard Chairs, Material Tubs, Frames, Earth Bonds, Pipe Pieces, Channel Pieces, Junction Boxes, Gear Cases, Ms Bonds, Wire Rope, , End Body Pieces, Gi Frames, Iron Mesh, Rod Pieces, Ms Sheets, Hoop Iron, Crushed And Damaged Mould Shoes, Wire Claws, Motor Pans, Locking Plates, Valves, Bolts & Nuts, Washers, Rivets, Sheet Strips, Push Trolley Frames, And Other Miscellaneous Items. Location: In The Bushes And Back Side Of Lots Of Both Sides Of Road No.1,2,3& 4 And Cross Road From Road 1 To Road 4 And Work Shop Road In Ferrous Yard And Nf Yard Main Road.

Description: CATEGORY: Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - Industry Unit; Sl No 1 Removing the existing Galavanized Roofing Sheet & stacking within a lead of 500m at location specified by Engineer In Charge; As per tender docume.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - Industry Unit; Sl No 2 Providing and fixing roofing sheet, cladding with zero point four seven mm thick colour coated concelled system profile corrugated/ semi corrugate.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - Industry Unit; Sl No 3 Providing and fixing in position of Aluminium sheet, beadings, clips etc wherever required, as specified or of equivalent weight in matt finish .. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - Industry Unit; Sl No 4 Supply and Application of two coat of synthetic enamel paint with one coat primer of approved colour and make over a coat of primer over new wood .. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - Industry Unit; Sl No 5 Shifting of structural steel material from BHAVINI CMM yard, Cutting to the required size, straigthening, Fabricating and Fixing miscellaneous St.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - Industry Unit; Sl No 6 Cutting, Removal, Segregating the corroded structural steel and stacking at identified location as directed by the Engineer In Charge The rate in..