Fabrication Tenders

Details: Description:- "supply Of Welding Portions 60 Kg (90 Uts) As Approved By Rdso For Welding Of Rails 60kgbytheprocessofatweldingalongwithcompleteaccossoriesconformingtotheirs specification No. T.19/2012 With Automatic Tapping Thimble Technology, 3 Pieces Mould (zircon washed) Manually Pressed For Execution Of Welding Of Rail Joint Including Consumable Stores Viz., Rail files, 3 Pieces Pre Fabricated Moulds With Zircon Wash, Luting Sand, Single Shot Crucible Charger, automaticthimble,ignitionmatchesetc.,completeatrespectivep.waydepotsinclusiveofall relevant Consumables Whether Imported Or Indigenous Required For The Work, Price,gst, Excise Duty, sales Tax, Service Tax, Packing, Loading And Transportation Charges, Octroi Duty, Consignment Tax, If any Etc., Complete By The Contractor And As Directed By The Engineer In Charge. (note :- Rdso approved Agencies Only Have To Offer Their Rates.) "

Details: Description:- Swrussor-2022,itemno.091010-manufacturingandsupplyofaluminothermic welding Portions Of 52kg/60 Kg/60ei-r260 As Approved By Rdso For Welding Of Rails 52kg/60kg/60ei- r260 Kg For 25mm Gap By The Process Of At Welding Along With Complete Accessories Confirming To the Specification Laid Down In Indian Railway Standard Specification No.irst-19-2020 Up To Date correctionslipswithsingleshotcruciblefittedwithautomatictappingthimble,3piecespre fabricated Mould (zircon Washed) Manually Pressed Using Compressed Air Petrol/lpg Pre Heating For executionofweldingofrailjointasdirectedbytheengineerinchargeatsite.note:1.the accessories Along With Welding Portion Shall Be Supplied As Per Annexure-i Of The Irussor - 2021. 2. rate Is Inclusive Of Transportation Of Above To Sse/p.way Stores.

Details: Description:- 91010 Manufacturing And Supply Of Alumino Thermic Welding Portions Of 52/60 Kg/60 ei-r260 Kg For 25 Mm Gap By The Process Of At Welding Along With Complete Accessories Confirming to The Specification Laid Down In Indian Railway Standard Specification No.irst-19-2020 Up To Date correction Slips With Single Shot Crucible Fitted With Automatic Tapping Thimble Technology, 3 Pieces pre-fabricated Mould (zircon Washed) Manually Pressed Using Compressed Air Petrol/lpg Pre Heating forexecutionofweldingofrailjointasdirectedbyengineerinchargeatsite.note:1.the accessories Along With Welding Portion Shall Be Supplied As Per Annexure-i Of The Irussor- 2021. 2. rate Is Inclusive Of Transportation Of Above To Sse/p.way Stores. 91012 For 52 Kg - 90 Uts Rail

Details: Repair, Maintenance, And Installation Of Plant/ Systems/equipments (version 2) - Icgs C-151; E 016 Sea Water Leakage Observed View Multiple Pin Holes From Ac System Pipe Line Pipe Line To Be Fabricated Renewed All Inway Job Include Removal Of Fitted .. , Repair, Maintenance, And Installation Of Plant/ Systems/equipments (version 2) - Icgs C-151; E 017 Black Water Leakage Observed Stp Pipe Line View Pipeline Material Deteriorated Perished Pipeline To Be Renewed Repaired As Per Sample Inway Jobs Includ.. , Repair, Maintenance, And Installation Of Plant/ Systems/equipments (version 2) - Icgs C-151; L 012 Navigation Communication Battery Cover For Protection From Rain Moisture On Flag Deck To Be Fabricated Mat Al Length 100 Cm Height 30cm; Service Provi.. , Repair, Maintenance, And Installation Of Plant/ Systems/equipments (version 2) - Icgs C-151; E 018 Stbd Gear Box Sea Water Cooling Line A Sea Water Leakage Observed From Pin Holes Of Stbd Gear Box Cooler Cooling Pipe Line Pipe Line To Be Chemically .. , Repair, Maintenance, And Installation Of Plant/ Systems/equipments (version 2) - Icgs C-151; L 013 Main Broadcast Not Producing Adequate Power Output From Speakers Suspect Amplifier Interface Module Malfunctioning Defect To Be Rectified And Proved Fo.. , Repair, Maintenance, And Installation Of Plant/ Systems/equipments (version 2) - Icgs C-151; H 023 Abnormal Sound And Vibration Observed Whilst Starting Ships Diving Air Compressor Diving Air Compressor To Be Overhauled Defect To Be Rectified And Pro.. , Repair, Maintenance, And Installation Of Plant/ Systems/equipments (version 2) - Icgs C-151; L 014 Wire-mess Fencing For Main Engine And Das Batteries Deteriorated Same To Be Repaired Mat Al Length 2m Height 1m; Service Provider

Details: Description:- Supplying, Installation, Testing And Commissioning Of Electric Driven Main Fire Pump compatible To Deliver 1620 Lpm At A Head Of 88 Mtr Suitable For Automatic Operation And Consisting Of following, Complete In All Respects, As Required : A. Horizontal Type, Multistage, Centrifugal, Split Casing pump Of Cast Iron Body & Bronze Impeller With Stainless Steel Shaft, Mechanical Seal Conforming To Is 1520. B. Suitable Hp Squirrel Cage Induction Motor, Tefc, Synchronous Speed 1500 Rpm, Suitable For operation On 415 Volts, 3 Phase 50 Hz, Ac Supply With Ip 55 Protection For Enclosure, Horizontal Foot mounted Type With Class-'f' Insulation, Conforming To Is-325. C. M.s. Fabricated Common Base Plate, coupling, Coupling Guard, Foundation Bolts Etc. As Required. D. Suitable Cement Concrete Foundation duly Plastered With Anti Vibration Pads.

Details: Description:- Manufacturing And Supply Of Alumino Thermic Welding Portions Of 52kg/60 Kg/60ei- r260 As Approved By Rdso For Welding Of Rails 52kg/60kg/60ei-r260 Kg For 25mm Gap By The process Of At Welding Along With Complete Accessories Confirming To The Specification Laid Down In indian Railway Standard Specification No.irst-19-2020 Up To Date Correction Slips With Single Shot crucible Fitted With Automatic Tapping Thimble, 3 Pieces Pre Fabricated Mould (zircon Washed) manually Pressed Using Compressed Air Petrol/lpg Pre Heating For Execution Of Welding Of Rail Joint as Directed By The Engineer In Charge At Site. Note: 1. The Accessories Along With Welding Portion shall Be Supplied As Per Annexure-i Of The Irussor - 2021. 2. Rate Is Inclusive Of Transportation Of above To Sse/p.way Stores.

Details: Supply Of Material And Execution Of Indoor & Outdoor Work For Provision Of Electronic Interlocking-msdac Based Automatic Block Signalling System Between Luni Jn And Bishangarh Station In Connection With Doubling Of Ln-smr-bldi Section Of Jodhpur Division Of North Western Railway. The Work Involves Provision Of New Electronic Interlocking At Satlana, Dudia, Dundara, Ajit, Bamsin,rakhi, Mokalsar, Balwara,bishangarh Stations And Samdari Jn. Along With Fifteen Numbers Of Auto Signalling Huts And Modification In Existing Medha Make Ei At Luni Jn. Provision Of Msdac Along With Associated Works Like Trenching & Laying Of Signalling And Telecom Cables In Pre-fabricated Ducts/dwc/gi Pipes, Supply-installation Of Point Machines, Apparatus Cases, Signals, Track Circuit Equipment, Earthing Material, Data Loggers, Eld, Fuse Alarms, Fire Alarms, Passenger Amenity Telecom Items Etc

Details: Description:- Css-1: Supply, Install, Test And Commission Of Css Substation Enclosure Non Walk- In type Fabricated By Gi Steel With Accessories (1) 11kv, 630a, 21ka/3sec. Ring Main Unit Consisting Of 1no. Incoming Fixed Vcb (manually Operated) & 2nos. Outgoings Fixed Vcb/sf-6 (manually Charging & closing) (2) 250kva, 11/0.415kv Crt Dry Type Transformer (3) On Load Changeover Switch Capacity 4- pole, 415v, 630a (4) Lt Panel Shall Consist Of 1no. Incoming Of 400a, 4pole, Mccb & Outgoings Of 4 nos. 4pole 100a Mccb And 1 Nos. 4pole, 250a Mccb (5) Apfc Panel Of 70kvar. Note: Foundation Of css Is Taken Separately. As Per Specification

Details: Description:- Manufacturing And Supply Of Alumino Thermic Welding Portions Of 52kg/60 Kg/60ei- r260 As Approved By Rdso For Welding Of Rails 52kg/60kg/60ei-r260 Kg For 25mm Gap By The process Of At Welding Along With Complete Accessories Confirming To The Specification Laid Down In indian Railway Standard Specification No.irst-19-2020 Up To Date Correction Slips With Single Shot cruciblefittedwith Automatic Tapping Thimble, 3 Pieces Pre Fabricated Mould (zircon Washed) manually Pressed Using Compressed Air Petrol/lpg Pre Heating For Execution Of Welding Of Rail Joint as Directed By The Engineer In Charge At Site. Note: 1. The Accessories Along With Welding Portion shall Be Supplied As Per Annexure-i Of The Irussor - 2021. 2. Rate Is Inclusive Of Transportation Of above To Sse/p.way Stores. For 60kg 90 Uts Rails

Details: Description:- Manufacturing And Supply Of Alumino Thermic Welding Portions Of 52kg/60kg/60e1-r260 As Approved By Rdso for Welding Of Rails 52kg/60kg/60e1-r260 Kg For 25mm Gap By The Process Of At Welding Along With Complete Accessories confirming To The Specification Laid Down In Indian Railway Standard Specification No.irst-19-2020 Up To Date Correction Slips with Single Shot Crucible Fitted With Automatic Tapping Thimble, 3 Pieces Pre Fabricated Mould (zircon Washed) Manually pressed Using Compressed Air Petrol/lpg Pre Heating For Execution Of Welding Of Rail Joint As Directed By The Engineer In Charge at Site. Note: 1. The Accessories Along With Welding Portion Shall Be Supplied As Per Annexure-i Of The Irussor-2021. 2. Rate Is inclusive Of Transportation Of Above To Sse/p.way Stores. For 60kg 90 Uts Rails