Fabrication Tenders

Description: Construction, Testing And Commissioning Of Steel Fabricated Structure 20 Nos. Of 10 Kl Capacity Staging 9 Mtr. Including Construction Of Suitable R.c.c. Valve Chamber In Village . Providing, Laying, Jointing, Interconnection, Testing And Commissioning Of 63 Mm Dia Hdpe Class 10 Kg/sqcm Of 1800 Mtr. Valve Specials And All Fittings Including All Allied Civil Works, Supplying & Installation Of Energy Efficiant Five Star Bee Rating Isi Marked Required Capacity Three/single Phase, 50 Hz, 415v, Deep Well Submersible Pump Stainless Steel Body, Suitable For 4"/6" Tube Well With Control Panel Starter Suitable For Submersible Pump With Dry Run Protection, Connections, Including Clamps, Bore Cap Etc 20 Nos. As Required As Per Specifications But Excluding Pipe, Ss/nylonwire Rope And Connection Cable Including Verification Of Tube Well Yield. & Electric Connection From Cseb, Construction Of Brick Masonry Switch Room Of Size 1.50*1.50*3.00 Mtr (20 Nos), Providing 0 No Functional Household Tap Connection (f.h.t.c) (pe-al-pe Pipe 0 Mtr) In Individual Households And Government Instiution Etc.drilling Of 150 Mm Dia 130 M Deep Ordinary Tube Well 20 Nos. Complete With Trial Run Operation & Maintanance For 03 Months Under Single Village Piped Water Supply Scheme Under Jal Jeevan Mission For Village Chalni, Dumarkona & Morangi In Block Bagicha District – Jashpur.

Description: Released, Condemned And U/s Scrap Lettice Type Lighting Tower Fabricated By Iron Angles And Channels, Qty- 32.149 Mt, Location- (1) Up Yard (near Trd Mast Km 2017), (2) Up Yard Puliya K Age (near Trd Mast Km 2027), (3) In Front Of Sse/cable/telecom/ii (micro) (near Trd Mast Km 1149), (4) In Front Of Sse/cable/telecom/ii (micro) (near Trd Mast Km 4012), (5) Behind Dshed, Front Of Elect. Trip Shed (near Trd Mast Km 4026), (6) Behind Dshed Near Trd Mast No.1275 (near Trd Mast Km 4035), (7) In Front Of E Cabin (near Trd Mast No. 1331), (8) Behind Badiline Qtr. 199 At Pf1 (near Trd Mast Km 1016), (9) Pf 7-6 Nad End (near Trd Mast Km 1260), (10) Behind Iocl Pf 7 End (near Trd Mast Km 1218), (11) Between 572 Wll & New Ssp Of Sailana Overbridge (near Trd Mast Km 1060), (12) Inside Down Yard Area (near Trd Mast Km 1088), (13) Near Down Yard Master Office (near Trd Mast Km 1128). Mode Of Delivery By Actual Weighment Basis And On As Is Where Is Basis, Custodian- Sse-p-rtm, Fdp-80 Days.

Description: 98050114 Scrap Signalling,p Way And Ohe Items, C & W Items- Ms, Gi,ci Containing Signaling Units, Rods, Junction Boxes, Panels, Ms Gi Structures, Ladders, Mast, Rt U, Cb Etc And All Other Types Of Signaling Items, Gear Case, The Ground Connection, Ohe Fitting,ms Chains,heavy Structure Almirah/racks, Rods Angle, Channel, Pipes, Lc Material, Transformers, Ladders, Jali,spring Planck, Pentograph With Or Without Pneumatic Motor, Gate, Door,brake Cylinder, Tie Bar, Fencing, Trolley,ms Machines Etc., Tmt Bars Rods,pulley, Rib Cage,point Machines Without Motors,wagon Body Cut Piece Bogies Side Frame ,machines,st Sleeper, Ms Sheet ,various Types Sleeper Part, Tie Bar, Fencing Bars, I-beam Empty Drums, Light Fittings, Rail Pieces, Ms Wires, Bond, And Other Various Ms Fabricated Structures Of Sorts And Sizes With Or Without Parts Fittings Miscellaneous Items, Etc. And Non-ferrous Attachments, Unserviceable. Custodian Cdms Fe Prtn, Fdp = 40 Days. Lot Is At Two Stacks In Plot 2. Stack 1 Besides Workshop Wall Near Steel Furniture Lot. Stack 2 Near Broken Tin Shed. Note: Cutting Is Allowed For Easy Loading Of Materials Like Junctions Boxes, Location Boxes, Girders, Pipes .or Items Longer Than Truck Body.

Description: Bazaar Scrap : Actual Lot No.03122505 0200, Pl No.98050047. (15) (hsn Code: 720410-gst @18% On Fcm Basis) Cond. And Rusted And Corroded Us Bazaar Scrap Of Anti Monkey Device, Fabricating Scrap, Ec Boxes, Ms Doors, Angle Pieces, End Body Pcs. Trolley Frames, S Type Chair Pcs, Molb Pcs, Fiber Location Boxes, Gutter Sheet Pcs, Iron Brake Blocks, Chutes, Gi Binding Wire, Guard Chairs, Material Tubs, Board Frames, Earth Bonds, Springs, Pipe Pieces, Dsl/ele Loco Parts, Channel Pieces, Junction Boxes, Gear Cases, Ms Bonds, Wire Rope,end Body Pcs Oil Filters, End Body Pieces, Gi Frames, Panto Strips, End Body Pcs, Battery Stands, Wire Rope Pcs. Iron Mesh, Rod Pieces, Ms Sheets, Loco Side Wall Filters, Hoop Iron, Wire Claws, Motor Pans, Mould Shoes, Crushed And Damaged 05, 20 Paint Drums And 210ltrs And 182 Kg Cap Oil Barrels Grease Barrels And Full Or Cut With Or Without Attachments. Locking Plates Valves, Bolts & Nuts, Washers, Rivets, Sheet Strips, Push Trolley Frames And Other Miscellaneous Items. Location Road No.,2,3& 4 And Cross Road From Road 1 To 4 Cross And 2&3 And 3&4

Description: CATEGORY: Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - Industry Unit; Sl No 1 Removing the existing Galavanized Roofing Sheet & stacking within a lead of 500m at location specified by Engineer In Charge; As per tender docume.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - Industry Unit; Sl No 2 Providing and fixing roofing sheet, cladding with zero point four seven mm thick colour coated concelled system profile corrugated/ semi corrugate.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - Industry Unit; Sl No 3 Providing and fixing in position of Aluminium sheet, beadings, clips etc wherever required, as specified or of equivalent weight in matt finish .. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - Industry Unit; Sl No 4 Supply and Application of two coat of synthetic enamel paint with one coat primer of approved colour and make over a coat of primer over new wood .. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - Industry Unit; Sl No 5 Shifting of structural steel material from BHAVINI CMM yard, Cutting to the required size, straigthening, Fabricating and Fixing miscellaneous St.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - Industry Unit; Sl No 6 Cutting, Removal, Segregating the corroded structural steel and stacking at identified location as directed by the Engineer In Charge The rate in..

Details: Complete Cnc Machining Of Pole End Plate As Per Drawing 12530224704.raw Material Wt-174.9 Kg For Each, Finish Wt 80 Kg For Each, Scrap To Be Generated-94.9 Kg For Each Pole End Plate, Raw Material (fabricated Plate ) To Be Issed As Per Drg. No-3

Description: Scrap Ferrous Melting ,light Melting & Junk- Katchra Consisting Of G.i.& M.s.sheets ( Plane/ Corrugated ), M.s.& G.i.pipe, G.i.duct,tubler Pole Rusty & Damage Coach Cutting Parts, Door & Window ,luggage Frame,filter,fire Extingusher, Cut -up & Damage Drums Of Sorts,phinolex Pipe, Wire & Wire Rope, Gear Case, Brake Beams,nut, Bolt,ring Washer,seat Bearth Frame,wire Mesh, Fabricated Structure,moulding Frame, Battery- Box,ladder,fan Cage & Blade, Fan Blower, Almirah, Racks, Dismental Parts Of Table, Chair,dust Sheild Spring,pin,cotter,locking- Plate,dummy, Empty Electric Panel / Box, Dust Cart,shock Absorver, Damper,slack- Adjuster,lower Spring Seat, Protective Pipe, Bmbc Cover,brake Shoe & Side Frame Key, U- Type Bracket, Bond Strip,wire Claw, Rake- Ballast,brocken Parts Of Bearing, & Other Various Items Release From Loco ,carriage, Sig,electric,trd, Tmc,p. Way,of Sorts & Sizes Fit For Melting,light Melting & Junk- Katchra With Steel ,c .i.& Neg.n.f.attachment If Any. Note-1- Lb.p. 2- Cutting Allowed For Loading Purpose. 3- Other Than Melting,light Melting & Junk- Katchra Items Will Be Seperated During Cutting & Loading Time & Not Delivered. Location: Lying Between L/n-12 & Road In Plot-g

Details: Machining Of Stator Sole Plate Assy Of Ratle Project To Drawing 22510224708 Rev00 And Qap Qa/hg/670. F/m Wt. 879 Kg/unit, R/m Wt 977 Kg/unit.scrap Generated 98 Kg/unit.material In Fabricated Form Will Be Issued Bybhel As Per Drawing 2251022470

Details: Machining Of Bottom Bracket Arm Assy As Per Drawing 22570112702 Rev-02 F/m Wt 6738 Kg/unit, R/m Wt 7290 Kg/unit,scrap Generated 552 Kg/unit. Material To Be Issued Bottom Bracket Arm Assy In Fabricated Form As Per Drawing 22570112702 Rev-02

Details: CATEGORY: DX Type Air Handling Unit , Duct mounted ON and OFF type Heaters Non Flame Proof , Pre Fabricated Ducting and Site Fabricated Ducting , MS L Angle , THERMAL INSULATION , HEPA Filters with Casing , RETURN AIR GRILL MODULES , GRILLS , Volume Control Dampers. , Fire Dampers. , Pressure Monitoring system. , Condensing Units , Testing, Commissioning, Validation and Documentation Charges , Wall Panels Progressive type , Ceiling Panel Walkable type , Coving , Clean Room Doors , Air Heating Unit Electrical control Panel Provision for VFD and Temperature PID Controller , VARIABLE FREQUENCY DRIVES VFD , Temperature and Humidity sensor , POWER CABLES , Uninterrupted Power supply Distribution Boards , EARTHING SYSTEM , cable tray , LIGHT FIXTURES SYSTEM , ANTI STATIC FLOORING , Civil Works