Fabrication Tenders

Description: Tank Structural Works For Fabrication, Erection, Testing And Commissioning Of Tankage In Connection With Fabrication Erection, Testing And Commissioning Of Mild Steel Vertical Storage Tanks (ifrvt And Crvt) Including Tank Foundation And Allied Works At Jnpt Terminal, Navi Mumbai, Maharashtra. /// Tank Structural Works For Fabrication, Erection, Testing And Commissioning Of Tankage In Connection With Fabrication Erection, Testing And Commissioning Of Mild Steel Vertical Storage Tanks (ifrvt And Crvt) Including Tank Foundation And Allied Works At Jnpt Terminal, Navi Mumbai, Maharashtra.

Details: Description:- Metallizing Of Steel Work Of Girders With Sprayed Aluminium After Surface Preparation by Sand/grit Blasting, Followed By One Coat Of Etch Primer (is:5666) & One Coat Of Zinc Chrome Primer (is:104) And Two Coats Of Aluminium Paint (is:2339) With All Labour, T&p And Material As A Complete job Duly Conforming To All Relevant Specifications And Process Given Under Clause 39 Of Irs-b1-2001. note: Nominal Thickness Of Sprayed Aluminium Coating Shall Be 150 Microns. Dft Of Zinc Chrome primer Shall Be 25-30 Microns And Dft Of Each Coat Of Aluminium Paint Shall Be 12-14 Microns. On new Girder During Fabrication

Details: End Wall Assembly Not:-"mig Welding (131) Is To Be Read As Tig Welding (141) ", As Per Drawing: Lg15195alt'd' & Mdts 21332 Ver 0 Alongwith Shutter Complete /lock Asse Mbly To Drg.no. 2 10113.0.76.300.012 Alt'-r1' & Lw44318 Alt'c'., Packing Instruction: 1. The Sup Plier Shall Pack The End Wall In A Suitably Designed Returnable Fixture In Such A Way Th At End Wall Shall Not Get Scratched, Damaged, Twisted During Transportation, Storag E And Lifting And To Avoid Scratches On Outer Surface. It Should Be Wrapped With Envir Oment Friendly Material And It Should Have Standard Clamping /fastening Mechanism So That It Can Be Opened Easily. It Should Have Firm's Identification Mark. 2. First Returanable Fixture Along With End Wall Be Retained By Rcf & This Fixture Shall Be Exch Anged In The Second Lot Supply And So On. At The End Of The Contact, The Firm Shall Col Lect The Remaining Returnable Packing Fixture From Rcf. 3. The Packing Fixture/frame To Be Fabricated Having Sufficient Strenght To Bear Approximate 2 Tonne Load In Static & Moving Condition Of Two Coach Sets Of End Wall. 4. The Fixture /frame/pallet Should Be Designed So That The Packed End Wall Preferably Remain In Vertical Position To Minimize Surface Area. 5. It Should Also Be Suitable For Storage Of End Wallunder Open Sky. [ Wa Rranty Period: 30 Months After The Date Of Delivery ] ]

Description: CATEGORY: Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - Industry Unit; Power House Equipment, Pipelines, Layout, Fabrication, Erection & Commissioning of pipe lines for ZLD scheme of CTPS; As per SOW and ATC details

Description: Fabrication/repairing/fitting Of Various Parts Of Bottom Ash Hopper Flushing Apparatus Of Eco/aph/duct And Buffer Hoppers During Overhauling Of Unit 9 250mw Ahd Dtps Kasimpur Aligarh

Details: End Wall Assembly For Lhb Gs & Scn (amrit Bharat ) Coaches Note:-(1)in Dra Wings "mig Welding (131) Is To Be Read As Tig Welding (141)" As Per Design Letter No. Md4 6231 Dated 16.03.2024. (2)firm Shall Collect All Latest/final Drawings Before Manufactu Ring. There May Be Minor Modification In Design., As Per Drawing: 75415001 Alt. 'br1', Packing Instruction: 1. The Supplier Shall Pack The End Wall In A Suitably Designed Returnable Fixt Ure In Such A Way That End Wall Shall Not Get Scratched, Damaged, Twisted During Tra Nsportation, Storage And Lifting And To Avoid Scratches On Outer Surface. It Should B E Seperated By Suitable Environment Friendly Blocks To Avaoid Rubbing Of Two Endwall Surfaces . It Should Have Standard Clamping /fastening Mechanism So That It Can Be Ope Ned Easily. It Should Have Firm's Identification Mark. 2. First Returanable Fixture Along With End Wall Be Retained By Rcf & This Fixture Shall Be Exchanged In The Second Lot Su Pply And So On. At The End Of The Contact, The Firm Shall Collect The Remaining Returnable Packing Fixture From Rcf. 3. The Packing Fixture/frame To Be Fabricated Havi Ng Sufficient Strenght To Bear Approximate 2 Tonne Load In Static & Moving Condition O F Two Coach Sets Of End Wall. 4. The Fixture /frame/pallet Should Be Designed So That T He Packed End Wall Preferably Remain In Vertical Position To Minimize Surface Area. 5. It Should Also Be Suitable For Storage Of End Wallunder Open Sky. [ Warranty Period: 30 M Onths After The Date Of Delivery ] ]

Description: Misc. Ferrous Scrap In Lot(released Miscellaneous Cut Pieced Ferrous Scrap From Modifiying The Old Vertical Stacking Comprising Of Cut Pieced Channels,angulars ,sheets And Defective Broken Items Of Comoressors Cylinders (m5 Section) , Released Miscellaneous Ferrous Scrap Consisting Released From Vertical Stacking, Angular Cut Pieces , Mast Cut Pieces , Pipe Cut Pieces, Ms Sheet Cut Pieces (e3 Section), Miscellaneous Ferrous Scrap (defective/unserviceable) ( I)defective Sander Brackets, Ii) Defective Sander Nozzles, Iii) Worn Out Liners, Iv) Defective Footsteps, V) Worn Out Fasteners Of All Sizes, Vi) Fabrication Waste Cut Pieces, Vii) Defective Side Bearer Ducts, Viii) Defective Sander Ejectors, Ix) Defective Stands, X) Defective Hood Pieces, Xi) Released Brackets Of Wag9 Bogies (mech Section)) [sr. Dee/trs/vskps Lr. No. Wat/trs/s/17/595, Dt- 25.03.2025]. Consignee Lot No. G/2025/1,sale And Delivery By Weight.

Description: Eoi For Designing, Fabrication, Supplying, Installation, Commissioning Of Clo (slurry) Filter Including Set Up For Continuous Handling Of Filtrate Reject Concentrate Of Indmax Fcc Unit At Indian Oil, Bongaigaon Refinery

Description: CATEGORY: Fabrication and supply of complete Structural items of FOL shed of Size 6150 X 3200 X 3000 mm using mild Steel structure , Side walls stores using 0.60mm of PPGL sheets , Roofing Sheets as per TS , MS Doors as per TS , Self screw for fixing of roof size as reqd on site. , Star Screw full thread 25 mm ISI Mark , Nuts and Bolts 8mm dia 60mm to 120mm long with washer , GI J Hook 8mm with 1 nut 2 bitumin washer and limped washer , Rivit of 500 Nos , LED Tube light complete set 18W 4 feet long , Switch Piano flush type , PVC switch board 6 inch x4 inch , PVC casing and capping of size 25 mm , Wire Single Core Copper Conductor 2.5 Sqmm , MCB 10 Amp SP , Armoured Cable10 sqmm 4 Core copper , LT Panel Board Factory Fabricated , Shelves for storage 2100 mm x 450 mm x 750mm , Insulation tape 45 Mtr with ISI mark , Change over switch 100 Amp 04 pole , Ceiling Rose. , GI Wire 14SWG , Fire Extinguisher 6 Kgs ABC dry powder stored pressure type , Paint for touch up Green , Paint for touch up Black , Distemper , Lightening Conductor , Plywood as per TS , Scantling teak wood size 140 to 160 inch , FRP Storage Tank Conforming to UL 1316 of Capacity 10KL with standard accessories , PVC Pipe 100 MM Dia , GI Elbow 20mm , GI Gate valve connector , GI Socket 20mm with thread , GI Union 20mm , PVC flexible hose pipe 20 mm dia , Industrial Fuel Transfer Pump Automation Grade , Provision of fire extinguisher 50 Kgs ABC Dry powder stored pressure type trolley mounted. , HDPE Tarpaulin of Size 30 feet x 30 feet , Ordinary Portland Cement grade 43 , Coarse Sand , Stone Aggregate 20 MM , Stone Aggregate 40 to 63 mm , 10 mm TMT Bar , RR Masonary stone , Connected store as per final design

Description: CATEGORY: Fabrication and supplying of structural stores for ORL 20 Men of size 12000mm x 6000mm , Wall Panel compatible to structure as per TS , Roof set 0.60mm thick pre colour coated pre profiled steel sheets Green colour of size 1.00 m x 13 feet , Roof set 0.60mm thick pre colour coated pre profiled steel sheets Green colour of size 1.00m x 10 feet , Ridge cover will be of 0.60mm thick and 1800mm wide TCT sheet , PUF Insulated Sandwich PUF Panels , Aluminium frame windows of size 1200mm x 1200mm alongwith wire mesh and sliding shutters of 5mm thick toughened glass , Fixed aluminium frame of 900x900mm along with 6mm thick acrylic sheet glazing to the entire length of the verandah , Aluminium Door single shutter of size 900mm x 2100mm , PUF insulation Door single shutter of size 900mm x 2100mm , sunshades of size 1500 mm X 500 mm , Self Tapping screw 1 inch long , Self Tapping screw 2 inch long , Self Tapping screw 3inch long , Star Screw half inch of ISI Mark Pkt of 300 Nos , Screw 1 inch of ISI Mark Pkt of 300 Nos , Nut and Bolts 8mm dia 60mm long with washer , Nuts and Bolts 12mm dia 25mm long with washer , LED Tube light complete set 20W 4 feet long , Switch piano flush type 5 Amp , Switch socket combination 5 Amp 5 with PVC box pin , Switch Socket Combination 2 in 1 as per TS , PVC switch board 8 feet x10 feet ISI Mark , PVC switch board 6 inch x4 inch ISI Mark , PVC casing and capping of size 25 mm , PVC Casing capping tee bend make , PVC Casing capping L bend make , PVC Square box 4 inch x4 inch , Wire Single Core Copper Conductor 1.5 Sqmm , Wire Single Core Copper Conductor 2.5 Sqmm , MCB Box 6 way double door , MCB 10-32 Amp SP , Wire 02 core 6 Sqmm copper as per TS , Insulation tape half inch x 25 Mtr with ISI mark , PVC earthing cable 1 Sqmm , Ceiling Rose , Change over switch 32 Amp DP , GI Wire 14SWG , Black screw 15mm Pkt of 500 Nos , Flexible conduit pipe 20mm dia , LED bulk head fitting , Lightening Conductor jelly filled complete set , Double bunk of size 6 feet x 3 feet , Steel locker of size 750x600x950mm half hanging and half shelving , Looking mirror of size 1200x750 x 3.5mm , Provision of fire extinguisher 6.0 Kgs ABC Dry powder stored pressure type , 25 mm dia drapery rod 1500mm each with both end socket and brackets , 3 KW roof top solar system on the roof , Water Dispenser mini magic super TT of capacity 20 ltr with bottle , Cement in polythene bags 50 kgs OPC 53 Grade , Crushed Stone Aggregate 20 mm graded confirming to IS 383 to 1970 , Coarse Sand confirming to IS 383 to 1970 , Hard core of broken stone aggregate of size 45 to 63 mm , RR Stone , Cement White Make , Vitrified colour tiles 8 to 10 mm thick square or rectangular polished area of each tiles not exceeding 0.36 sqm including colour pigment as required for joints. , Quick setting compound , Water Proofing compound , 3mm thick APP membrane as per TS , Bitumen primer ready to apply for laying of APP membrane , Silicon sealant with Gun , Multipurpose expandable PU foam as per TS , Connected stores as per final design