Fabrication Tenders

Details: for the work of Maintenance of 11 KV LT lines, installation of new electric poles in place of damaged poles, work of balding on crooked poles, Earthing work with the help of earthing rod, grouting work of PCC/ST pole, fabrication of line material and spreading of ABC cable of different sizes, tying and tightening work on pole and other maintenance work under the jurisdiction Electricity Distribution Division, Firozabad.

Description: Structural Fabrication Erection Re-fabrication And Painting Work On Labour Contract Basis /// Structural Fabrication, Erection, Re-fabrication And Painting Work On Labour Contract Basis

Description: CATEGORY: Fabricated Special Purpose Vehicle on Truck/Van (Q3)

Description: 1.cut Mast Rsj 8x6 - 3.30 M = 1no, 3.85m = 1 No, 3.95 M = 2no, 4.10 M=1, 4.60 M=1 No, Cut Mast Bfb 8x8-3.50 M = 1 No, 4.45 M=1 No, 7.75 M=1 No, Cut Mast B-200-7.85 M = 3 No, 7.90 M=1 Cut Mast B-150-7.85 M = 1 No, Total= 14 Nos Weight- 4030 Kg 2.cut Mast Ttu-8.20 M = 1 No. Cut Mast Portal Nu- 8.20 M =1 No, 8.50 M =1no, Da Portal (2.87) M= 02 No. Total 05 Nos Weight- 1494.73 Kg 3.cut Mast B-150-3.20 M = 1 No, 3.45m =2 No, 3.55 M= 4 No, 3.70 M= 4 No. 3.80 M= 13 No, 3.85 M =5 No, 3.90 M=5 No, 3.95 M = 6 No, 4.10m =3 No, 4.20 M -7 No. 7.80 M= 1 No. (01 M = 38.91 Kg Approx.) Total= 51 No's (200.45 M) Weight- 7799.50 Kg 4.cut Mast B-175-3.55 M 1 No, 3.85 M=1 No, 3.90 M=1 No, 4.05 M=1 No,4.15 M=1 No, 4.20 M =1 No, 6.95 M= 1 No, (01 M = 44.51 Kg Approx.) Total 7 No's = (30.65m) Weight- 1364.23 Kg 5.cut Mast B-200-3.55 M=1 No, 3.60 M=1 No, 3.70 M=1 No, 3.80 M=2 No, 3.85 M= 3 No, 3.90 M= 3 Nos, 3.95 M=2 No, 4.15 M=1 No (01 M = 49.91 Kg Approx.) Total 14 No's (53.75 M) Weight- 2682.66 Kg 6.cut Mast Ttu- 3.80 M=1 No, 3.90 M= 2 No, 4.35 M=2 No, 4.45 M=1 No, (01 M = 75.00 Kg Approx.) Total= 6 No's (24.75 M) Weight- 1856.25 Kg 7.cut Rsj 8x6 Mast - 3.40 M=1 No, 3.60 M=1 No,3.75 M=1 No, 3.85 M = 1 No, 3.90 M=1 No, 4.20 M=1 No. (01 M = 52.00 Kg Approx.) Total= 6 No's (22.70 M) Weight- 1180.40 Kg 8.cut Mast 8x8 - 3.60 M=2 No, 3.80 M=1 No, 3.85 M=2 No, 4.10 M=1 No, 7.80 M=1 No. (01 M =50.00 Kg Approx.) Total= 7 No's (30.60 M) Weight- 1530 Kg 9.cut Mast Bfb 6x6 -3.10 M=1 No, 3.50 M=1 No, 3.55 M=1 No, 3.70 M=1 No, 3.75 M=4 No, 3.80 M=1 No, 4.10 M=1 No, 4.20 M=1 No, 4.40 M =1 No (01 M =37.01 Kg Approx.) Total 12 No's (45.35 M) Weight- 1678.40 Kg 10.unserviceable Da-2 Fabricated (300x300) = 02 Nos. (per Da= 74.00 Kg Approx.) Weight- 148 Kg 11.unserviceable Released Ohe, Psi Fitting- Number Plate, Anti Falling Rod, Sealed Bearing, Atd Angle, S.s. Wire Rope, G.i. Cut Mast, L Clamp, T.t. Sleeve, Released & Rusty M.s. Flat, 40x6 Mm, Isolator Base Handle, Operating Pipe, Guide Tube, B.t. Pipe, S.t. Pipe, R.t. Pipe, Top Fitting, Bottom Fitting, T.t. Adjuster, C Clamp, T.t. Sleeve With Nut Bolt, Bolt 16x360, Bolt 14mm, Steady Arm Hook, Anti Wind Clamp, Anti Creep Wire, Push Arm Adjuster, Rt Clip, Bt Clip, Tt Bolt, Ss Bolt, U Bolt, Suspension U Bolt, 9ton Adjuster, Anchor Bolt, 0076-2a, Compensating Plate, Equalizing Plate, Double Strap Small, Distance Rod, 0076-2, Bolt 20x550, Bolt 20x65, Bolt 16x220, Rrt Adjuster, 3233-1, 3236-1, Counter Weight Rod, Tower Wagon Liner Cylinder, Cr Bearing, Head Recon Set, Injector, Truck Shaft, Cb Sps, Kamani, Bearing, Channel, Cls Pannel-01 No, Etc. (ony G.j. Item) Weight- 4586.45 Kg 12.unserviceable T&p And M&p Items Weight- 219.38 Kg Note: Only G.i. (ferrous Item Included) Total Weight ¿ 28570 Kg Sse Ss-11 No. Sse/trd/bina 2024-25 Dt. 26/12/2024 Note: 1.delivery Can Be Given By Actual Weight. 2. Quantity Of Lot Has Been Assessed On Approximate Basis Subject To (+/-) 10% Variation During Delivery By Actual Weight. 3.lot To Be Sold As Is Where Is Basis. 4.cutting Permission May Be Allowed For Easy Loading And Transportation. 5.if Any Similar And Other Type Of Material Except Description Found During Delivery Will Not Be Delivered.

Description: CATEGORY: Fabricated Converter with Cooling Assembly and Accessories

Description: CATEGORY: Fabricated Special Purpose Vehicle on Truck/Van (Q3)

Description: Fabricating And Supplying Of Furniture In Dr Samrat Chatterjee Lab At 2nd Floor Thsti Building At Ncr Bsc Faridabad

Details: Description:- Fabrication, Application Of Cold Galvanising Paint Including Paint, Transportation And erection Of Structure/ Longitudinal/u/ Transverse /special/c Bond Etc. Including All Required Material like Nuts, Bolts, Etc. (only M.s Flat Will Be Supplied By Railway).

Description: Set Of Fabricated Assemblies For Lhb Low Noise Power Car.

Description: CATEGORY: Fabrication and Supply of Flexible Adaptive Thermal Camouflage Pads