Drawer Tenders

Description: CATEGORY: Strip Seal Expansion Joint. As per drawing attached , Drainage Spout. As per drawing attached , Shuttering Plate size 1000 mm x 1200 mm, 3.15 mm thick with supporting angle iron of size of 50x50x5 mm angle iron alongwith cross support of 50x50x5mm angle iron. As per drawing attached , MS Pipe 40 NB having length 6.00 mtr, outer dia 48.30 mm, thickness 4.0 mm Class-heavy and confirming to IS 1161-1998 cross section area 5.56 cm square , Thermocol size 1.0 Mtr x 1.0 Mtr x 50 mm thick

Description: 30050110 pin Large With Collar For Equalizing Stay 16t/ Bg-icf To Drawing No. Wlrrm-0-5-003 Item 11 & 12, Alt.-g/9 Mat Spec.:-as Per Drawing. Drawing No. Wlrrm-0-5-003 Item 11 & 12, Alt.-g/9 Attached At Sn-4 [ warranty Period: 30 Months After The Date Of Delivery ] [quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ] dbrt Workshop Depot, Nfr Assam 210.00 Numbers kir Gsd, Nfr Bihar 24.00 Numbers consignee nbq Workshop Depot, Nfr Assam 613.00 Numbers pno Gsd, Nfr Assam 15.00 Numbers

Description: Set Of Sealing Rings For Traction Motor Type 6fra6068 For Wap-7/wag-9 Loco. Set consists Of 03 Items As Follows: (i) Ref. No.1 Of Clw Drawing No. 4twd.096.030 Alt- 2 Or Its Latest = 01 No./set (ii) Ref. No.2 Of Clw Drawing No. 4twd.096.030 Alt-2 Or its Latest = 01 No./set (iii) 'o' Ring Of Size Dia. = 382mm, Thickness = 08mm As Per abb Drawing No. Ib012-00755 Or Its Latest = 01 No./set.(note: Material To Be supplied By Clw Approved Source Only As Per Clw Item Id:2101221).

Description: [cbc (aar-h Type) Measuring Gauge. A Complete Set Of Gauges Is Consist Of Following Six Gauges Forinspection And Measurement Of Cbc H Type (aar-h Type ) Coupler . All Gauges Are Made Of Hard Alloy Steel Andhardness 45-50 Hrc With Nickel Plating & Laser Marking. 1. Contour Condemning Limit Gauge (jaw Gap Gauge) Forchecking Cbc H Type Coupler To Aptp Drawing /gauge No-34100-1- 01 No. 2. Contour Maintenance Gauge (knuckleprofile Gauge) For Checking Cbc H Type Coupler To Apta Drawing Gauge No. 31000 -01 No. 3.aligning Wing Limitgauge For Checking Cbc H Type Coupler To Apta Drawing/gauge No- 32600 -01 Nos. 4- Knuckle Nose Wear &stretch Limit Gauge For Checking Cbc H Type Coupler To Apta Drawing/ Gauge No- 34100-2a-01 No. 5- Verticalheight Aligning Wing Pocket & Guard Arm Gauge (go Gauge Must Pass) For Checking Cbc H Type Coupler To Aptadrawing/gauge No. 34101-4 -01no. 6- Vertical Height Condemning Limit Aligning Wing Pocket & Guard Arm Gauge(no. Go Gauge Must Not Pass) For Checking Cbc H Type Coupler To Apta Drawing/gauge No.- 44250-5-01 No. Makepie/ganapathy/ Or Similar]

Description: CATEGORY: Gift Paper , Acrylic Colour , Glue Gun Sticks , Colour Powder 100gm , Colour Ribbon 25mm , Colour Ribbon 1 inch , Gift Wrapping Ribbon , Photo Glossy Paper , Cutter Large , Glue Stick 15 Gm , Paper Pin T Type , Ivory Sheet , Drawing Sheet Red , Transparent Tape 2inch , Transparent Tape 1inch , Transparent Tape 50mm , Tape Brown 2 inch , Fevicol 100 ML , Fevicol 200 ML , Fevicol 500 ML , Cutter Blade Small , Cutter Blade Large , Drawing Sheet Green , Drawing Sheet Blue , Drawing Sheet Yellow , Drawing Sheet White , Drawing Sheet Organge , Talc Roll 50mtr , Black Sketch , Blue Sketch Dark , Lamination Sheet A4 , Lamination Sheet Legal , Transparent Tape Red 50mm , Transparent Tape Blue 50mm , Transparent Tape Red 1 inch , Transparent Tape Blue 1 inch , Chisel Marker All Colour , Permanent Marker Bullet Tip Red , Permanent Marker Bullet Tip Blue , Permanent Marker Bullet Tip Green , Permanent Marker Bullet Tip Black , Spiral Sheet White A4 , Spiral Sheet Blue Legal , Double Side Tape , Pilot V7 Blue , Index File XC 515 Model , Board white laminated 6 feet x 4 feet , Register 400Pages , Register 300Pages , Register 200Pages , Paper A4 70GSM , Paper Legal 70GSM

Description: CATEGORY: GLAND FIN, FSG-1, BIG FIN SIZE 334 DIA X 321.4 DIA X 1.25 X 0.3 AS PER DRAWING NO HWPM CPPM TG123 GLANDS 101, SL NO 1 , GLAND FIN, FSG-1, SMALL FIN SIZE 334 DIA X 325.4 DIA X 1.25 X 0.3 AS PER DRAWING NO HWPM CPPM TG123 GLANDS 101 SL NO 2 , GLAND FIN, FSG-2 AND BPG- B, BIG FIN SIZE 665 DIA X 652.4 DIA X 1.50 X 0.3 AS PER DRAWING NO HWPM CPPM TG123 GLANDS 101 SL NO 3 , GLAND FIN, FSG-2 AND BPG-B, SMALL FIN SIZE 665 DIA X 656.4 DIA X 1.50 X 0.3 AS PER DRAWING NO HWPM CPPM TG123 GLANDS 101 SL NO 4 , GLAND FIN, BPG-S AND IG, BIG FIN SIZE 611 DIA X 598.4 DIA X 1.50 X 0.3 AS PER DRAWING NO HWPM CPPM TG123 GLANDS 101 SL NO 5 , GLAND FIN, BPG-S AND IG, SMALL FIN SIZE 611 DIA X 602.4 DIA X 1.50 X 0.3 AS PER DRAWING NO HWPM CPPM TG123 GLANDS 101 SL NO 6 , GLAND FIN, RSG, BIG FIN SIZE 416 DIA X 403.4 DIA X 1.50 X 0.3 AS PER DRAWING NO HWPM CPPM TG123 GLANDS 101 SL NO 7 , GLAND FIN, RSG, SMALL FIN SIZE 416 DIA X 407.4 DIA X 1.50 X 0.3 AS PER DRAWING NO HWPM CPPM TG123 GLANDS 101 SL NO 8 , GLAND FIN, BPG-S TG-1, BIG FIN SIZE 616 DIA X 598.4 DIA X 1.50 X 0.5 AS PER DRAWING NO HWPM CPPM TG123 GLANDS 102 SL NO 1 , ALUMINIUM, SEAL RING, FSG, SIZE 342 DIA X 320 DIA X 2.00, AS PER DRAWING NO HWPM CPPM TG123 AL SEAL RINGS 101 , ALUMINIUM, SEAL RING, RSG, SIZE 420 DIA X 400 DIA X 2.00, AS PER DRAWING NO HWPM CPPM TG123 AL SEAL RINGS 101 , ALUMINIUM, SEAL RING, FOS AND ROS, SIZE 265 DIA X 245 DIA X 2.00, AS PER DRAWING NO HWPM CPPM TG123 AL SEAL RINGS 101 , ALUMINIUM, SEAL RING, THRUST BEARING, SIZE 324 DIA X 305 DIA X 2.00, AS PER DRAWING NO HWPM CPPM TG123 AL SEAL RINGS 101 , ALUMINIUM, SEAL RING,REC, SIZE 385 DIA X 365 DIA X 2.00, AS PER DRAWING NO HWPM CPPM TG123 AL SEAL RINGS 101 , SS-316 ANNEALED CAULKING WIRE 1.2 MM SQUARE , SS-316 ANNEALED CAULKING WIRE 2.0 MM SQUARE , SS-316 ANNEALED CAULKING WIRE 2.5 X 2.0 MM , SS-316 ANNEALED CAULKING WIRE 3.0 X 2.0 MM , SS-316 ANNEALED CAULKING WIRE 3.5 X 2.0 MM

Description: Providing Architectural And Structural Consultancy Soil Investigation Contouring Of Area Preparation Of Drawings Complete With Doors And Windows Plumbing Electrical And Its Complete Estimation Preparation Of Boq Structural Design Bases On Determinati

Description: Split Cotter, As Per Drg.no. As Per Icf Drawing No: Icf T-3-2-632 / Item - 2, A Specn: Spec: Icf/md/spec - 008, Rev - 02 .

Description: Description :support Angle (small) For 20 Nb Pipe As Per Drawing No.judw/mech./22-769 , sr No. 3 [ Warranty Period: 30 Months After The Date Of Delivery ]

Description: Stainless Steel Wash Basin 'd' Type With Mounting Brackets, To Icf Drawing No.icf/std-6-3-020, Alt.d/nil Or Latest, Item Nos. 1 To 6.