Drawer Tenders

Details: Description :mch Lock Assembly With 2 Key As Per Specification. Size: As Per Drawing No- B8/rs/72 57 Material: Main Body Lock - Free Cutting Brass (c3604bd) Cylinder-c3604bd, Cr-plate Latch-stainle ss Steel Bar (sus304) Finish Main Body: Nickel Plating (mbni) Lock: Chrom Plating (mbcr) Key Turn 9 00 Hardness: Ss Material - 70 Hrb Brass Material - 22-133 Hrb Uts (ultimate Tensile Strength ): 50 0-700 Mpa Endurance Test: 40,000 Cycles Operation Material Composition: Copper - 56.69%, Zinc - 3 8.67%, Tin - 0.600%, Lead - 2.28%, Iron - 0.620%, Aluminium - 0.510%, Nickel - 0.520%, Manganese - 0.038%, Arsenic - 0.012%, Phosporus - 0.013% And Silicon - 0.038% Hardness: 22-133 Hrb Uts (ult imate Tensile Strength ): 124-1030 Mpa Endurance Test: 40,000 Cycles Operation Note: All The Test C ertificates Should Be From Nabl Accredited Labs And Duly Signed And Sealed By A Signatory Authority of The Supplier. Make: Melco/takigen/amar Trading. ]

Details: Notice Inviting E-tender Punjab & Sind Bank, Guwahati Zonal Office Invites E- Tenders Under 2 Bids System I.e. Technical Bid & Financial Bid, From Reputed, Bona Fide And Intending Contractors In The Prescribed Format For Proposed Interior Furnishing, Electrical, Lan Cabling, Ac Works, Cctv, Fire Alarm & Civil Work For Interior Renovation & Re-furnishing Of Model Branch At Deulahland, Imphal, Manipur. The Tender Is To Be Submitted Only By Eligible Furnisher Through Online Mode Only. Tender Documents, Technical Specification, Drawing, Bill Of Quantities Uploaded On Specific Interface Which Will Be On The Bank’s E-procurement Site. Furnisher May View The Tender Notice On Bank’s Website Https://punjabandsindbank.co.in And Download & Upload The Same From/on Bank’s E-procure Website Https://psb.eproc.in The Tender Should Be Uploaded On The Above Website Up To 26.02.2025 By 03.00pm. Technical Bid Will Be Opened On 26.02.2025 At 3.30pm. As Mentioned In The Tender Documents. The Bank Reserves Right To Cancel Any Or All Tenders And Stop The Process At Any Point Of Time Without Assigning Any Reason Or Notice Whatsoever. For Any Further Clarification/query Contact-+91-7896536440 During Office Hours From 10.00 Am To 5.00 Pm Over Phone Or In Person. Zonal Manager Click Here

Details: Notice Inviting E-tender Punjab & Sind Bank, Guwahati Zonal Office Invites E- Tenders Under 2 Bids System I.e. Technical Bid & Financial Bid, From Reputed, Bona Fide And Intending Contractors In The Prescribed Format For Interior Furnishing (allied Works) Of Zonal Office Guwahati On 4th Floor Of Sethi Trust Building At Bhangaghar, G.s. Road, Guwahati, Assam. The Tender Is To Be Submitted Only By Eligible Furnisher Through Online Mode Only. Tender Documents, Technical Specification, Drawing, Bill Of Quantities Uploaded On Specific Interface Which Will Be On The Bank’s E-procurement Site. Furnisher May View The Tender Notice On Bank’s Website Https://punjabandsindbank.co.in And Download & Upload The Same From/on Bank’s E-procure Website Https://psb.eproc.in The Tender Should Be Uploaded On The Above Website Up To 24.02.2025 By 03.00pm. Technical Bid Will Be Opened On 24.02.2025 At 3.30 Pm. As Mentioned In The Tender Documents. The Bank Reserves Right To Cancel Any Or All Tenders And Stop The Process At Any Point Of Time Without Assigning Any Reason Or Notice Whatsoever. For Any Further Clarification/query Contact-+91-7896536440 During Office Hours From 10.00 Am To 5.00 Pm Over Phone Or In Person. Zonal Manager Click Here

Details: CATEGORY: Pencil HB Platinum, 10 Nos. in each packet , U Clip 28 mm Plastic , U Clip 35 mm MS Vikram , Stapler No. 10 Kangaroo , Clip Board Plastic Omega , Pilot Pen V5 , Highlighter Set Luxor , OHP Pen Set Fabre Castle , Stapler Pin for No. 10 , Correcting Fluid Pen UNI German , Permanent Marker Reynold , White Board Marker Reynold , Paper Pin assorted 100 Gm Vikram Pkt , Paper Cutter L , Lamination Pouch A4 Size, 100 Nos. per Packet , Stapler Pin, 24 by 6 , Signature Folder Clip file and Lever File , Eraser Non Dust, Apsara Jumbo, Pack of 20 Nos. , Laminated Colour Sheets for covering of registers , Divisional Folders Display book 60 Pkts with colour Paper , Duster Magnetic for White Board , Patti Folders, Pack of 10 Nos. , Drawing Pin 1.9 cms, 50 Nos per packet , Flat Ruler 12 in , Ruler Plastic 18 in , Bull dog clip, Pack of 12 Nos. , Tag cotton small, 100 nos. in each bundle , Twine Jute , Registers Ruled 4 Qrs , Registers Ruled 2 Qrs , Exercise book SQ Ruled , Pack of 10 Nos. , Short Hand Book

Description: 829921690010 srph346350-vacutainer Needle With Visibility Of Blood Entry 21g For Multi-sample Colle ction Should Have The Following Specifications: 1). The Designing Of The Needles Should Be Such Th at It Can Able To Minimize The Pre- Analytical Variability Throughout The Specimen Collection And H andling Process To Ensure Reliable Results And Should Be Suitable For Faster Procedures. 2). The needles Should Be Suitable For Closed- System Blood Collection I.e Drawing Blood Directly From T he Vein Into Vacuum Collection Tubes To Prevent Exposure Of Atmosphere. 3). The Needles Should B e Suitable For Multi- Sample Collection.4). Needles Should Be Sterile, Double-ended With A Sleeve C overed Safety Valve For Use With Vacutainer Tube Holder And Vacuum Blood Collection Tubes. 5). S ize Of The Needle Should Be 21g X 1 Inch (gauge: 21g, Length: 1 Inch./25 Mm).6) Needle Design Should provide Instant Confirmation Of Needle Placement, Through Visual Flashback Indication.7). There S hould Be A Chamber Or Similar Arrangement At The Needle Junction For Easy Visual Confirmation Of blood Flow Entry.8). Needle Should Have Low-angle Bevel Design And Should Be Coated With Silico ne/ Similar Low Friction Lubricant Coating To Ensure Gentle And Smooth Vein Entry (for Smooth Pai nless Pricking To The Patients 9). The Firm Should Provide Certificate Of Compliance Report For Eve ry Batch And Material Used For Making The Needle And Sterilization Of The Needle Should Comply W ith Iso Standards.10). The Product Should Be Bis/iso/ce/us Fda Certified And Should Produce The Ce rtificate While Quoting In The Tender.11). The Firm Should Supply Suitable Needle Holders Along Wit h The Needle Supply And Also Should Submit Adequate Sampling Material For Checking Suitability & for Validation, Verification Of Productunit:no ] consignee Acms/drug Stores/rh/pgt, Sr Kerala 1000.00 Numbers

Description: 829921690010 srph346350-vacutainer Needle With Visibility Of Blood Entry 21g For Multi-sample Colle ction Should Have The Following Specifications: 1). The Designing Of The Needles Should Be Such Th at It Can Able To Minimize The Pre- Analytical Variability Throughout The Specimen Collection And H andling Process To Ensure Reliable Results And Should Be Suitable For Faster Procedures. 2). The needles Should Be Suitable For Closed- System Blood Collection I.e Drawing Blood Directly From T he Vein Into Vacuum Collection Tubes To Prevent Exposure Of Atmosphere. 3). The Needles Should B e Suitable For Multi- Sample Collection.4). Needles Should Be Sterile, Double-ended With A Sleeve C overed Safety Valve For Use With Vacutainer Tube Holder And Vacuum Blood Collection Tubes. 5). S ize Of The Needle Should Be 21g X 1 Inch (gauge: 21g, Length: 1 Inch./25 Mm).6) Needle Design Should provide Instant Confirmation Of Needle Placement, Through Visual Flashback Indication.7). There S hould Be A Chamber Or Similar Arrangement At The Needle Junction For Easy Visual Confirmation Of blood Flow Entry.8). Needle Should Have Low-angle Bevel Design And Should Be Coated With Silico ne/ Similar Low Friction Lubricant Coating To Ensure Gentle And Smooth Vein Entry (for Smooth Pai nless Pricking To The Patients 9). The Firm Should Provide Certificate Of Compliance Report For Eve ry Batch And Material Used For Making The Needle And Sterilization Of The Needle Should Comply W ith Iso Standards.10). The Product Should Be Bis/iso/ce/us Fda Certified And Should Produce The Ce rtificate While Quoting In The Tender.11). The Firm Should Supply Suitable Needle Holders Along Wit h The Needle Supply And Also Should Submit Adequate Sampling Material For Checking Suitability & for Validation, Verification Of Productunit:no ] consignee Acms/drug Stores/rh/pgt, Sr Kerala 1000.00 Numbers

Details: CATEGORY: 1. SWG Gasket With OR, As Per ASME B16.20 SIZE 0.5 Inch X 150- , 2. SWG Gasket With OR, As Per ASME B16.20 SIZE 0.75 Inch X 150- , 3. SWG Gasket With OR, As Per ASME B16.20 SIZE 1 Inch X 150- , 4. SWG Gasket With OR, As Per ASME B16.20 SIZE 1.5 Inch X 150- , 5. SWG Gasket With OR, As Per ASME B16.20 SIZE 2 Inch X 150- , 6. SWG Gasket With OR, As Per ASME B16.20 SIZE 2.5 Inch X 150- , 7. SWG Gasket With OR, As Per ASME B16.20 SIZE 3 Inch X 150- , 8. SWG Gasket With OR, As Per ASME B16.20 SIZE 4 Inch X 150- , 9. SWG Gasket With OR, As Per ASME B16.20 SIZE 6 Inch X 150- , 10. SWG Gasket With OR, As Per ASME B16.20 SIZE 10 InchX 150- , 11. SWG Gasket With OR, As Per ASME B16.20 SIZE 12 Inch X 150- , 12. SWG Gasket With OR, As Per ASME B16.20 SIZE 14 Inch X 150- , 13. SWG Gasket With OR, As Per ASME B16.20 SIZE 18 Inch X 150- , 14. SWG Gasket With OR, As Per ASME B16.20 SIZE 0.5 Inch X 300- , 15. SWG Gasket With OR, As Per ASME B16.20 SIZE 0.75 Inch X 300- , 16. SWG Gasket With OR, As Per ASME B16.20 SIZE 1 Inch X 300- , 17. SWG Gasket With OR, As Per ASME B16.20 SIZE 2 Inch X 300- , 18. SWG Gasket With OR, Winding Material SS 316, As Per ASME B16.20 SIZE 2.5 Inch X 300- , 19. SWG Gasket With OR, As Per ASME B16.20 SIZE 3 Inch X 600- , 20. SWG Gasket With OR, As Per ASME B16.20 SIZE 18 Inch X 600- , 21. SWG Gasket Without Ring, Size- Gsk OD 475 mm X Gsk ID - 377 mm X Gsk Thk- 3.5 mm , 22. SWG Gasket With OR, As Per ASME B16.20 SIZE 4 Inch X 150- , 23. SWG Gasket With Ring, Size- OR OD 336mm x Gsk OD 315 mm X Gsk ID - 285 mm X IR ID - 265 x Gsk Thk- 4.5 mm x Ring Thk -3.2mm , 24. SWG Ring, Size- OR OD 400mm x Gsk OD 373 mm X Gsk ID 340 mm X IR ID - 303 x Gsk Thk- 4.5 mm x Ring Thk -3.2mm , 25. SWG Gasket Without Ring, Size- Gsk OD 50 mm X Gsk ID - 40 mm X Gsk Thk- 3.2 mm , 26. SWG Gasket Without Ring, Size- Gsk OD 330 mm X Gsk ID - 306 mm X Gsk Thk- 3.2 mm , 27. SWG Gasket Without Ring, Size- Gsk OD 100 mm X Gsk ID - 75 mm X Gsk Thk- 3.2 mm , 28. SWG Gasket Without Ring, Size- Gsk OD 405 mm X Gsk ID - 385 mm X Gsk Thk- 4.5 mm , 29. SWG Gasket Without Ring, Winding Material SS 316, Filler Material Expanded Graphite Size- Gsk OD 200 mm X Gsk ID - 160 mm X Gsk Thk- 4.5 mm , 30. SWG Gasket Without Ring, Size- Gsk OD 130 mm X Gsk ID - 100 mm X Gsk Thk- 4.5 mm , 31. SWG Gasket Without Ring, Size- Gsk OD 108 mm X Gsk ID - 91 mm X Gsk Thk- 4 mm , 32. SWG Gasket Without Ring, Size- Gsk OD 165 mm X Gsk ID - 150 mm X Gsk Thk- 4 mm , 33. SWG Gasket Without Ring, Size- Gsk OD 102 mm X Gsk ID - 92 mm X Gsk Thk- 4.5 mm. , 34. SWG Gasket Without Ring, valve size 80. Size- M-82-N-62-O-114,P-134,W-3.5 Drawing attached. , 35. SWG Gasket Without Ring, valve size 100. Size- M-87-N-67-O- 142,P-162,W-3.5 Drawing attached. , 36. SWG Gasket Without Ring, valve size 150. Size- M-114-N-89-O-205,P- 230,W-3.5 Drawing attached. , 37. SWG Gasket Without Ring, size 350. Size- M-195-N-135-O-415,P-475,W-3.5 Drawing attached. , 38. SWG Gasket Without Ring, Size- Gsk OD 220 mm X Gsk ID - 185 mm X Gsk Thk- 4.5 mm. , 39. SWG Gasket Without Ring, Size- Gsk OD 405 mm X Gsk ID 385 mm X Gsk Thk 4.5 mm , 40. SWG Gasket With OR, As Per ASME B16.20 SIZE 1 Inch X 1500- , 41. SWG Gasket With OR, As Per ASME B16.20 SIZE 2.5 Inch X 600-

Description: CATEGORY: Dr fixit pidilite URP in 01 Ltr packing , Dr fixit 01L silicon , Dual directional reflective speed raising breaker 3 Meter long 03 Black 03 Yellow breakers with installation with raising , GI Wooden Screw 15 mm 200 Nos in Pkt , GI Wooden Screw 20 mm 200 Nos in Pkt , GI Wooden Screw 25 mm 200 Nos in Pkt , GI Wooden Screw 30mm 200 Nos in Pkt , GI Wooden Screw 35 mm 200 Nos in Pkt , GI Wooden Screw 50 mm 200 Nos in Pkt , Liquid Rubber solutionfor water prooofing with reinforcement fabric , Paint enamel in one ltr packing AF Blue , Plain glass 3ft x 6ft 3mm thick , PVC Bend pipe for Low level cistern 32mm , PVC internal fitting kit for low level cictern complete , PVC lid for OHT Cap 500 Ltr , Steel screw 13 to 6 pack of 500 pcs , Steel screw 19 to 6 pack of 500 pcs , Steel screw 19 to 8 pack of 500 pcs , Steel screw 25 to 6 pack of 500 pcs , Steel screw 32 to 8 pack of 500 pcs , Solar SPARKLE cat eye of aluminium pressure die casted body of size 115 x 100 x 22 mm as per required , Thread cotton , White cement grout , Window glass sheet 3mm thick 4ft x3ft plain , Capacitor 2.5 MFD , Empire tape 20mm , High pressure cut off switch for AC , HT insulation tape 20mm , Insulation tape 20mm x 25mtr , Insulation tape 25mm x 25mtr , MCB TPN 100 Amp , PVC Casting caping round size 19 or 20mm double lock , Step fan regulator 2 module , Aluminium thimble of size 35Sqmm DOWELLS or BARCO or JAINSON LUGS or COMET LUGS , Aluminium thimble of size 95Sqmm DOWELLS or BARCO or JAINSON LUGS or COMET LUGS , Aluminium thimble of size 70Sqmm DOWELLS or BARCO or JAINSON LUGS or COMET LUGS , Aluminium thimble of size 240Sqmm DOWELLS or BARCO or JAINSON LUGS or COMET LUGS , Aluminium thimble of size 400Sqmm DOWELLS or BARCO or JAINSON LUGS or COMET LUGS , Sheet Metal Enclosure with provision of MCCB 200 or 250 Amps 4 pole as incomer and MCB SP and TP out going , Cupboard wooden knobs in carved design , Cusioned seat and back set with ply and latherite tapestry cloth for revolving chair executive trade pattern , Favicol SH , Glue synthetic or rubber adhesive pidilite SR 505 , Paint enamal black Apcolite premium satin from Aianpaints , Paint enamal smoke grey Apcolite premium satin from Aianpaints , red oxide primer in one ltr packing , Stanless Steel counsil handle one side for shutters. 100mm in rose gold finish , Stainless Steel hydraulic hingers 0 deg crank 4 holes for soft closing of cabinet doors , Sand paper multignt 60 to 220 , SS304 T beading 10 mm rose gold finish , Botton mount soft closing telescope channels for drawers size 10 inch in powder coated finish or Zn plating , Thinner in one ltr packing , Touch wood for polish , Turpentine Oil , Wood adhesive for PVC edge banding FEVICOL probond Edgelock in tubes of 140g , HT Heat shrinkable jointing kit outdoor 70 to 120 sqmm , HT Heat shrinkable jointing kit indoor 70 to 120 sqmm

Description: CATEGORY: dia GI Tubing medium grade 1 point 5 Mtr Long Make Jindal or Tata or Kalinga , Service cable PVC insulated aluminium conductor 1100 volt grade Heavy duty served with inner service connection 10 Sqmm 2 core Make Havells or Finolex or Plaza , Ceiling Rose three terminal snow white Make Anchor or SSK or CONA , LED Bulk head fitting high pressure die cast aluminum front cover with glass cover with specially design gasket with LED lamp 10 watts as per TS , PVC Flexible wire copper conductor multi stranded 0 pont 0016 by 76 Make havells or Finolex or Plaza , PVC Flexible Conduit pipe 15 mm dia Make Polycab or Supreme or Finolex , PVC Round or Square Block Make Polycab or Supreme or Finolex , Fire extinguisher of 1 kg of dry power type conforming to IS 13849 along with its accessories Make Cease fire or Omex or Alfa Fire , Earthing plate 600 x 600 x 6 mm Galvanised steel suitable for GI strip fittings drilled with 2 nos holes for 6 mm dia near one side , CI Earth Pit Cover of size 300 x 300 x 6 mm with Angle iron frame of size 20x20mm 3 mm thick with MS frame , Funnel fitted with 20 mm diameter GI Pipe 1.5 m Long Pipe Make Jindal or Tata or Kalinga , GI wire 4 mm diameter for earthing , Charcoal , Salt normal , Air terminal single pointed aluminium rod 12mm dia and 300mm long , Testing point terminal block make of Gun metal phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screw , Aluminium strips 25x3mm , Galvanised iron strip 32x6mm , Funnel fitted with 20mm dia GI Pipe 1 point 5m long Make Jindalor Tata or Kalinga , Earthing Plate 600x600x6mm GI steel suitable for GI strip fittings drilled with two nos holes for 6 mm dia near one side , CI earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with MS frame , Insulating PVC block 75x75x30mm with insulating clamp nut and bolt Make Presto or Polycab or Finolex , Study chair of size length 56 Cm, Height 82 Cm and Width 56 Cm Type Lacquered finish with arm seat and back cushion velvet upholstery Make Supreme or equivalent , Study Table of size 4 ft x 2ft Wooden top on round tube structure with three drawers on one side , Steel almirah of size 1855mm with 4 shelves MS sheet doors and and locker 1.00mm thicklock material brass and steel finished and thickness of shelves 0 point 90mm , Mild Steel rack adjustable sheet 1.00mm thick nuts and bolts are in hexagon blck steel overall height 1point 755m depth 0 point 410m and width 0 point 915m , Hand Held Trolley of size 1200 x 900 x 1200 mm of 2 mm thick MS plateform and size of wheel 127 mm with loading capacity minimum 200 kg and overall weight of trolleys 19 Kg

Description: Schedule Above Referred To:property No.1 First Schedule (description Of Land)all That The Piece Or Parcel Of Revenue Redeemed Land, Hereditaments And Premises Whereon Or Part Whereof The Said Building Is Standing Admeasuring 3 Collahs 11 Chittacks And 35 Sq. Ft., A Bit More Or Less Lying And Situate At The Municipal Premises No. 53, Dr. Meghnad Saha Sarani (formerly Named As Southern Avenue), Kolkata 700 029, Comprised In Holding No. 58, Sub-division "p", Division Vii, Dihi Panchannagram, Police Station-tollygunge, Now P.s- Lake, Kolkata Municipal Corporation Ward No. 87, District Registration Office At Alipore, District 24 Parganas (south) Butted And Bounded In The Manner As Follows:north: By The Premises No. 538. Dr. Meghnad Saha Sarani,south: By The K.m.c. Road Named As Dr. Meghnad Saha Sarani (formerly Named As Southem Avenue), East. By The Premises No. 53/1. Dr. Meghnad Saha Sarani West: By 40 Feet Wide K.m.c. Road Named As Lake Place Second Schedule (description Of Mortgage Flat)all That The Southern Side Of The Second Floor Flat Of The Building Admeasuring Super Built Up Area Of 1398 Sq. Ft., A Bit More Or Less Consisting Of Two Bedrooms, One Drawing Cum Dining Space, One Box Room, Two Baths With Privies With Modern Fittings, Two Verandahs Projected On Two Roads Lying And Situate At The Municipal Premises No. 53, Dr. Meghnad Saha Sarani (formerly Named As Southern Avenue), Kolkata 700 029, P.s. Tollygunge, Now P.s. Lake, Together With The Undivided Proportionate Share And/or Interest In The Land Comprised In The Said Premises Attributable To The Said Flat/unit And In The Common Areas, Facilities, Amenities And Installations In The Said Building. This Property Is In The Name Of Avik Kanti Paul Vide Registered Deed No. 369 Of 2010property No.2first Schedule (description Of Land) All That The Piece Or Parcel Of Revenue Redeemed Land, Hereditaments And Premises Whereon Or Part Whereof The Said Building Is Standing Admeasuring 3 Collahs 11 Chittacks And 35 Sq. Ft., A Bit More Or Less Lying And Situate At The Municipal Premises No. 53, Dr. Meghnad Saha Sarani (formerly Named As Southern Avenue), Kolkata 700 029, Comprised In Holding No. 58, Sub-division "p", Division Vii, Dihi Panchannagram, Police Station Tollygunge, Now P.s.- Lake, Kolkata Municipal Corporation Ward No. 87, District Registration Office At Alipore, District 24 Parganas (south) Butted And Bounded In The Manner As Follows:north: By The Premises No. 53b. Dr. Meghnad Saha Sarani,south: By The Km.c. Road Named As Dr. Meghnad Saha Sarani (formerly Named As Southern Avenue);east. By The Premises No. 53/1. Dr. Meghnad Saha Sarani West: By 40 Feet Wide K.m.c. Road Named As Lake Placesecond Schedule (description Of Mortgage Flat)all That The Northem Side Of The Second Floor Flat Of The Said Building Admeasuring Super Built Up Area Of 500 Sq. Ft., A Bit More Or Less Consisting Of One Bedroom, One Bath With Privy With Modern Fittings, A Small Terrace In The North, One Verandah Projected On One Road Together With One Covered Car Parking Space On The Ground Floor Of The Said Building Admeasuring 120 Sq. Ft., A Bit More Or Less Lying And Situate At The Municipal Premises No. 53, Dr. Meghnad Saha Sarani, (formerly Named As Southern Avenue), Kolkata 700 029, P.s. Tollygunge, Now P.s.- Lake, Together With The Undivided Proportionate Share And/or Interest In The Land Comprised In The Said Premises Attributable To The Said Flat/unit And In The Common Areas, Facilities, Amenities And Installations In The Said Building.