Drawer Tenders

Details: Description :galvanised Steel Channel Sleeper Of (ismc-150x75) Mm For 60 Kg Rail Assembly As Based On Rdso Drawin g No. Rdso-ba 1636/1/r2 & Rdso 1636/r2 & Rdso/t-5155 To 5164 (size: 150x75x2655) Including All Fitting/ Fastening with All Accessories As Per Drawing No. Edfc/pryj/273&735/01. [ Warranty Period: 30 Months After The Date Of Deliver y ] [quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ]

Details: Description : Running Contract For Manufacture And Supply Of 6 Mm Thick Nylon Cord Reinforced Grooved Rubber Sole Plates For Placing Bene ath Rails At Turnout Conforming To Rdso Drg. No. T-4865 With Latest Alteration For 1:8.5 / 52 Kg Turnout With Over Riding Curved Switch Conformi ng To Irs Specifications No. Irs T-55 With Latest Amendment. The List Of 6 Mm Thick Ncr Grsp To Be Supplied In A Set As Per Given In Annexure- c.(the Alterations In Drawing And Specification Issued By Rdso Up To The Date Of Tender Publication Shall Be Applicable .) [ Warranty Period: 3 0 Months After The Date Of Delivery ] ]

Details: Description :set Of Stainless Steel Hex Head Screw, Nut And Washer. One Set Consist Of Following Items (i) hex Head Screw M8x60 Item No. 16 Of Rcf Drawing No. Lihwss02- 01 No. (ii) Nut M8 Item No. 03 Of Rcf Dr awing No. Lihwss08- 02 Nos. (iii) Ss 304 Plain Punched Washer M8 To Din 125 - 02 Nos. All Nut Bolt & W ashers Should Be Assembled And Supplied In Packing Of 100 Sets. [ Warranty Period: 30 Months after The Date Of Delivery ] ]

Details: Supply Of Roof Mounted Ac Package Unit Rmpu Type-ii For Lhb Power Car, Con sisting Of Rmpu With R407-c Refrigerant -01 No. To The Rdso Specification No. Rdso/pe/spe c/ac/0061-2005 Rev-1 And Microprocessor Controller Unit- 01 No. To The Rdso specification No.rdso/pe/ Spec/ Ac/0139-2009 Rev.1, Type - I Complete With Accessories As Pe r Scope Of Supply As Envisaged In The Rdso Specifications And Without Air Bellows (suppl y Air, Fresh Air And Return Air). Note: 1. Rdso Drawing No Rdso/pe/sk/ac/0069-2004, Rev-3 O r Latest Shall Be Followed. 2. Standardisation Of Location Of Ntc, Ohp & Esti Sensors Sh all Be As Per Rdso Modification Sheet No Rdso/pe/ms/ac/0087 (rev-0)-2022. 3. Mounting Det ails For Rmpu Switch Panel Shall Be Provided As Per Drawing No.icf/sk3-7-2-062 Alt- A. 4. Dif ferential Pressure Switch (dps) Based Heater Protection System For Rmpu Shall Be Provided As Per Rds o Modification Sheet No. Rdso/pe/ms/ac/0089 (rev-0)-2022. 5. Packing Instruction As Per Pi-026 ver.1.0 [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Details: Description :direct On Line Starter With 2 Sets Of 3 Pole / 4 Pole Contactors (2 Sets Ac Contactor Coils, 25 A mp Each), Each Set Controlled Separately By 415v. 50hz Ac Contactor Coils. One Set Of Contactor Coil Is To B e Controlled By The Forward Direction Of Rotation Through An Inching Type Push Button And The Other Set Thro ugh Another Inching Button To Control The Reverse Direction Of 7.5 Hp, 3phase, 50hz, 415volts, Ac Motor. Th ere Must Be Electrical Interlocking Contact To Prevent Both Set Of Contactors To Close Simultaneously. Each of Above Push Buttons Should Have One Normally Closed Auxiliary Contact And One Stop Push Buttons Are Re quired. The Starter Shall Be Complete With Over Load, Shall Be Wired And Shall Be Provided With Power Plug and Socket With Locking Arrangement As Shown In Schematic Drawing No. 1736/23 And 1737/23 Alt.-1. Each starter Is To Be Provided With 2 Nos. Power Plug And Sockets And 2 Nos. Of Control Plug And Sockets. Maxim um Dimension Of The Starter Should Not Excessed 280mm (b) X 360mm (l) X 162mm (t) Irrespective Of Di mension Given In Drawing. Material Specification: Is: 13947 Pt.-4 Sec.-1, 1993, Make: Bch Or Siemens Or H avells Or Jeevan Or Schneider Or L&t. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Details: Description:- Manufacturing,supplyingandinstallationofrubberizedlevelcrossingpadsof approved Quality And Specification With Railway Track By Suitable Clamping Arrangements To Make A rubberized Road. The Road Surface Is Tobe Prepared By Using Multiple Set Of Rubber Pads Of Length 1.20m Each And Each Set Consists Of 2 Nos Of Rubber Pad Placed Inside The Running Rails And 2 Nos outside The Running Rails Resting On Rcc Edge Beam At The Edge To Retain The Assembly As Per approved Drawing. Cement And Steel For This Will Be Supplied By Contractor And Is Included In The rate.no Separate Payment Shall Be Made. A) 60kg Rails Track Note: Rubberized Surface Pads To Be procuredfromrdsoapprovedsourceandtobelaidundersupervisionofmanufacturer's representative.

Details: Description :supply Installation And Commissioning Of Complete Lt Driving Wheel Assembly For Eot Crane No. 475/87 Capacity 35 t/10t. Wheel Od: 680mm X Thick 160mm. Axle Od: 150mm X 520mm Lg. Bearing Housing, Cover & Bearing No. 22226. Liquid Dye pentrant Test, Dimension Report, Chemical And Mechanical Report With Inspection Certificate From Govt. Approved Test House Or Na bl Accredited Lab Must Accompany With Supply. Details As Per The Annexure And Drawing Attached. [ Warranty Period: 12 Mont hs After The Date Of Delivery ] ]

Details: Manufacturing And Supply Of 1 In 8.5 Bg , 60 Kg Weldable Cms Crossing On Psc Sleepers In Accordance With Rdso's Standard Drg. No. T-6441(alt. 2) Including Supply Of 6mm Thick Grsp (drg No. Rdso/t-6198 To Rdso/t-6203, Rdso/t-6800, T-6800/1, T-6801/1), Excluding Standard Fish Plates , Fish Bolts And Nuts Ercs, Insulating Liners Etc. Specification : Irs-t-29-2023 And Str : Tdg 0021 Ver 2. With Latest Alteration/amendment Of Drawing / Specification/str Issued Upto The Date Of Tender Opening Will Be Applicable.

Details: Under Frame Complete For Memu Tc6 Coach To Drg No. 74711001, Col 2, Alt F Th e Manufacturing Facility As Per Icf/md/spec-147, Issue Status-01, Rev-02, With Amendment no. 01. Special Condition : The Under Frame Should Be Supplied As Normal Side Up And Side Be arer Side Down. Packing Drawing Similar To Be As Per Icf/j&t/misc-2487, Alt B [safety Item] [ warranty Period: 30 Months After The Date Of Delivery ] [quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation permitted: Max 8 Lacs ] ]

Details: Description :supply Of Axle Mounted Disc Brake System With Ep Assist Brake System For L slrd Amrit Bharat Coaches., As Per Drawing: Rdso Specification Rdso/2011/cg-04 (rev.03) Is sue May'2024' Without Brake Disc And Emergency Brake Cable Box Or Passenger Emergen cy Pilot Valve., Packing Instruction: As Per Standard Packing. It Should Be Ensured That Ite m Should Not Rub During Transportation. The Item Should Be Packed With Adequate Str ength. Transit Damage , If Any , Shall Be At The Cost Of Supplier [ Warranty Period: 36 Mon ths After The Date Of Delivery ] ]