Drawer Tenders

Details: Construction of Bina Refinery Betwa Barrage Project on Betwa River having approximate minimum gross capacity of 42.94 MCM on turnkey basis with maximum total submergence of 647 Ha land (0 Ha Forest, 79.32 Ha Private land, 567.68 Ha Government land) comprising of preparation of Construction drawings & design, obtaining approval of all construction drawings & design from the competent authority including construction of all civil, mechanical and electrical works involved in the construction of Barrage for flood discharge 22890 Cumecs. The work includes survey of Head Work and Submergence with Fixing of Chainage cum Boundary Stone, geological investigations, hydrology approval, preparation and submission of complete Land Acquisition (LA) cases to competent authority for land acquisition of Barrage seat and submergence area and perusing LA cases for award, forest clearance, environmental clearance and all other clearances which are required for Barrage construction. Construction of permanent BT/WMM road for Barrage approaches to BPCL Bina refinery Factory and Malhargadh Road respectively , Construction of Concrete Overflow block, drilling grouting, Non-over flow blocks including RCC T beam Deck slab bridge with minimum 6.6 meter width, Energy Dissipation arrangement, earthen dam , river training and construction of coffer dam, environmental sluice including design, drawing and erection of Vertical gates with hoisting arrangements, automatic lifting beam, Electrically operated hoist with foot bridge and 2 no. set Stop log arrangements, Mono rail arrangement including all related components and hoist supporting structures including painting with primer and anti-corrosive treatment as per Latest relevant IS CODE and departmental circulars for all component of Barrage structure involved in construction including model study of the project Construction, Planning & Design of control room and chaukidar quarter Building , all lighting and maintenance of all components, including dam break analysis, Emergency action plan(EAP) preparation, gate operation & O/M manual, instrumentation in dam including RTDAS (Real time Data Acquisition System),AWS,ARS,AWLR etc. for monitoring and any other work as directed by the Engineer-in-Charge as per details given in scope of work with removal of defect in defect liability period for 60 months after completion of the project.

Details: Description :set Of 03 Fasteners For Cattle Guard And Rail Guard Mounting: (1) Bolt Hex Head 3/4-10 X 2- 1/2 To Emd Part No. 271773 As Per Drg. No. 27177 3 Alt B Or Latest, Qty - 10 Nos. (2) Washer Flat 3/4 To Em D Part No. 131017 As Per Drg. No. 131017 Alt-a Or Latest, Qty - 6 Nos. (3) Nut Lock 3/4-10 To Emd Pa rt No. 9416541 As Per Drg. No. 9416541 Or Latest, Qty - 6 Nos. Drawing Attached [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Details: Construction of 40 Bedded Mahila Barrack at Bn HQ Campus Rampura of Bn HQ 66 Bn BSF under SHQ BSF Abohar (Sh Consultancy services for complete soil investigation, Architectural & Structural design and plan, elevation & Sectional elevation mentioning full details, detailed calculation & Drawing as per latest I.S. Code (vetting from any Govt. college or University) and Detailed Estimate for Construction of 40 Bedded Mahila Barrack on basis of DSR 2023 & upto date correction slips and Market rate analysis. Submission of detailed estimate including Measurement sheet, Rate of Analysis as per latest DSR 2023 in 03 Copies (Soft & Hard)

Details: Description :set Of Gasket For Intervehicular Coupler For 3-phase Locos Equipped With 500 Kva Hog Converter As Per Rdso/pe/spec /ac/01 77-2013 (rev. 01). Each Set Consists Of 02 Items In 03 Nos. 1) Foundation Rubber Gasket (sealstrip Rcf Drg No-lw71332) For Iv Coupler Sock et Assembly. Qty - 01 Nos. 2) Sealing Ring Gasket ( Rsdo Drawing No. Rdso/pe/sk/ac/0235-2021 Rev.-0 ) Of Coupler Body And Cover For Iv Co upler Socket Assembly Qty- 02 Nos. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Details: Resin Cast Spout Assembly , Spout Fitting With Connector , insulated Connector R , Front Insulated Connector Y , Front insulated Connector B , Rear Insulated Connector R , Rear insulated Connector Y , Rear Insulated Connector B , Instru control Box , Vertical Isolating Vcb Trolley , Earth Leakage with Cbct , Power Converter 110v Ac To 110v Dc , Tripping 110v Dc 220v Dc , Mechanism For Tripping Coil , Master Tri relay , 11kv 110v Draw Out Type Pt , Digital Protection Rel epoxy Resin Cast Current Transformer , Side Cable Box

Details: One Coach Set Of Pu Foam Cushion Material For Lscn/eog Coaches To Drg . Icf /sk3/6-1-097, Col-i , Alt -f . Cushioning Material Shall Be Of Pu Foam Conforming To Rdso Sp Ecification Rdso/2007/cg-04 Rev.01 Or Latest. Note: Firm Has The Option For Offering Seat S And Berths Cushion With Lower Density Conforming To Spec.rdso/2007/cg-04, Rev-01 Or Latest Also. Please Visit Icf Vendor Portal For Downloading Drawing Https://vp.icf.gov.in/vendtendor Detnew.php Using Key: 07241syfxkc3539 [ Warranty Period: 120 Months After The Date Of Delivery ] ]

Details: Description :hose Flexible For Tm Ventilation Of 3-phase Locos As Per Clw Drawing No.1209-11.339- 037 Alt-1 Or La test And As Given Below: 1).material Shoud Be Neoprene Rubber With Nylon Ring 2mm Thick Shore A Hardness 50 +/- 5 2). Hose Mus t Be Collapsable Type 3). Rubber Shall Be Properly Vulcanised Note: A). Material Test Certificate (physical & Chemical) To Be Submitte d By The Firm To Ensure The Product. B).supply By Sources As Per Clw Item Id: 2100225 In Ireps Vendor Directory. C).one Sampl e To Be Got Approved Before Effecting Bulk Supply. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Details: Endwall Door Complete., As Per Drawing: Lw56350 Alt I, Packing Instruction: Lhb doors (body Side Door And Saloon Sliding Door ) : Lhb Doors To Be Wrapped In Biodegra dable Bubble Sheet And To Be Packed In Wooden Box Made Of Planks Of Minimum 20mm Thi ck. The Wooden Boxes To Be Strengthened Along The Length At Four Places With Woode n Strips Of 40x100mm Suitable Length All Around The Box. A List Should Be Pasted On Ea ch Wooden Crate Showing Order No,pl No, Description Of Item,drg No/spec No/set List N o With Version,qty,firm's Name & Address,date Of Despatch Etc.

Details: Description :s No 89 Of Rsp 2023-24, Supply Of12.7 Mm Dia Lock Bolt With Collar With Required G rip Range 12.7 Mm To 19.05 Mm Conforming To Rdso Specn. No. Is/rdso-wd/ 0001: 2022. (one Set consisting Of 1 No. Lock Bolt & 1 No. Collar As Per Rdso Drg. Wd-11036-s-01, And Wd-11036-s-02 Alt. Mater ial & Specification As Per Drawing. The Head Of The Lock Bolts Necessarily Be Marked With Manufactures Ide ntification. The Marking On Collar Should Be Done On Lower Bottom Surface. ) [ Warranty Period: 30 Month s After The Date Of Delivery ] ]

Details: Set Of Crash Buffers For Vande Bharat Rake (crashworthy Design) Note:-fir m Shall Collect All Latest/final Specification/drawings Before Manufacturing. There M ay Be Minor Modification In Design., As Per Drawing: Mp24cbvb Version 0, Packing Instruction: set Of Side Buffer Assly. (helical Spring Type) (lh&rh) For Lhb Coach 1. The Packing Fixtu re/frame To Be Fabricated Having Sufficient Strength To Bear Approximate Weight Of Ei ght Nos. Of Side Buffer Assly. (helical Spring Type, Lh&rh). 2. The Supplier Shall Pack The set Of Side Buffer Assly. (helical Spring Type, Lh&rh) In Such A Way That This Set Should not Get Scratched, Damaged, Twisted During Transportation, Storage And Lifting. To Av oid Scratches On Outer Surface, It Should Be Wrapped With Environment Friendly Mater ial. 3. The Fixture/frame/pallet Should Be Designed So That The Packed Side Buffer Assly. (helical Spring Type, Lh&rh) Remains Preferably In Vertical Condition To Minimize Surfac e Area. 4. First Returnable Pallet Along With Set Of Side Buffer Assly. (helical Spring Typ e, Lh&rh) Will Be Retained By Rcf & This Pallet Shall Be Exchanged In The Next Lots Of Su pply. 5. It Should Be Suitable For Storage Of Side Buffer Assly. (helical Spring Type, Lh&r h) Under Open Sky. Firm's Identification Mark Should Be On The Packing Fixture/frame. Al ong With Complete Details Of Items I.e Description & Drg. No. And Plnos. ]