Drawer Tenders

Details: Description:- Signallingexecutionsor(includinggst)-scopeofworkincludestrenching, transportation And Laying Of S&t Cable, Mechanised Drilling/ Micro Tunnelling Under Important/ Busy metal/concreteroad/railwaytrackandlayinggipipe,boringandpullingcable,supply, transportation And Fixing Of Galvanised Iron Pipe And Drawing Of Cables Inside The Pipe, Hiring Of jcb/hydra/poclainmachine(ingoodworkingcondition)forlevelling&dressingofground/ dismantling Structures, Erection Of Full Location Box, Painting Of Location Box, Lettering / Numbering termination Particulars, Equipments Names Etc. Inside Location Box, Transportation, Installation Of signal Post For Macls (2-aspect And 3/4 - Aspect), Transportation And Fixing Of Junction Type Route indicator,transportation,installationandpaintingwithretroreflectivetapeof slb/bslb/legend/stop Board Etc., Painting Of Two Coats Of Synthetic Enamel Paint Over One Coat Of primer On Main Signal Post With Signal Units, Surface Base And Complete Fittings & Shunt Signal Post with Signal Unit, Surface Base, Lettering / Numbering Termination Particulars, Equipments Names Etc on Signals/track Lead Junction Box, Transportation, Grouting/erection, Wiring As Per Approved Wiring diagram Of 19" Relay Rack/composite/q-series Relay Rack, Transportation, Installation And Charging of Secondary Cell 2 V (2 Volt 80ah/ 2 Volt 120 Ah/ 2 Volt 200 Ah), Transportation And Installation Of electric Point Machine, Painting & Lettering Of Point Machine With Ground Connections Complete And point Junction Box, Painting & Lettering Of Electric Lifting Barriers (elb), Installation Of Maintenance freeearthingandconventionalearthing,routingandconnectingalltheequipmentinthe equipment/relay Room To Seeb With 10 Sq. Mm Copper Cable, Provision Of Cement Concrete Enclosure for Earth Electrode As Per Approved Drawing, Cement Concrete For Miscellaneous Items.

Details: Description:- Fabrication Of Insitu Glued Insulated Joints For 52kg./60kg. Rail To Rdso Drg. No.t/5361 During Day/night And Conforming To The Manual For glued Insulated Rail Joint 1998 Issued By Ministry Of Railways, Rdso/lucknow And In Accordance With The Process Sheet Of Eastern Railway, Plant depot/mughalsarai At 4.11.98 With Supply Of All Fittings And Accessories Such As - [a] 950mm Long Fish Plate Or As Per Rdso Drawing [b] Hts Bolts And Nuts [c] Purchased Washers [d] Insulating Bushes [e] Insulating Channels [f] 10mm Thick End Post [g] Araldite [h] Hardener [i] Glass Cloth Carrier With All materials & Fixtures For Cleaning And Assembling Excluding Rail. [work Has To Be Execute By Rdso Approved Firm] Note - 950 Mm Long Fish Plates And Hts bolts Should Be Got Inspected By Rites Before Supply And Fixing In Track. Special Conditions - 1. The Work Is To Be Completed Within (12) Twelve Months from The Date Of Issue Of Letter Of Acceptance. 2. No Break Up In Rates Will Be Accepted. 3. Indian Railways General Condition Of Contract And Standard specification 2020 Will Be Binding On The Contract. 4. Current Goods And Service Tax Registration Is To Be Submitted. 5. 950mm Long F/plates And Hts Bolts should Be Got Inspected By Rites Before Supply And Fixing In Track. 6. Only The Firms Having Rdso Approval In Manufacturing Glued Insulated Joints Can participate In This Tender. 7. Tenderer[s] Have To Submit Certificate Regarding Approved Firms Under Rdso For Manufacturing And Fabrication Of Glued Joints as Per Rdso Drawing No.t-5361/t-5843.

Details: Description :manufacture And Supply Of Anti-creep Device For 10125 Mm Curved Switches With Zu-1-60 / 60e1a1 Thick Web Tongue Rails For 1 In 12 Turnouts F or B.g. (1673 Mm) For 60 Kg (uic)/60e1 On Psc Sleepers As Per Rdso Drg. No.rdso/t-8782 & Rdso/t-8783 (alt-2) Or Latest Alterations If Any Complete With Fit tings (including 27mm Dia. Hts Bolt & Nuts To Drg. No. Rdso/t-8786 & Rdso/t-8787 (alt-1) And Hardened Packing Plate To Drg. No. Rdso/t-8784 & Rdso/t-8 785. Acd Material Shall Be Cast Product Confirming To The Requirement Of Grade Sg-500/7 Of Is: 1865-1991 "indian Standard Iron Casting With Spheroidal Or N odular Graphite - Specification" (third Revision). Notes : (i) The 27 Mm Dia Hts Bolt And Nuts Shall Be Confirm To Is : 3757 & Is:6623 And Shall Be Manufacture d By Rdso Approved Vendor For Hts Bolts & Nuts. The Dimension Of Hts Bolts And Nuts Shall Be As Per Drawing No. Rdso /t-8786 & Rdso/t-8787. These Bolt and Nuts Are Shall Be Arranged And Supplied By The Suppliers /tenderers. (ii) Hardened Packing Plate Shall Confirm To Is : 6649 And Material 45c8 To Is:1570 ( hardened Tempered). The Dimension Of Hardened Packing Plate Shall Be As Per Drawing No. Rdso/t-8784 & Rdso/t-8785. Hardened Packing Plate Shall Be A rranged And Supplied By The Suppliers /tenderers. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Description: CATEGORY: Adhesive flags paper colour , Adhesive flag plastic , Attendance register 100 pages , Art Line drawing pen 0.1, 0.3, 0.5, 0.7mm , Binder clip 32mm , Binder clip 25mm , Binder clip 19mm , Blade 7 O Clock , Box File large size , Borosil glass medium set of 6 Nos , Calculator ordinary 12 digit , CD Mailer , CD Rewriteable , CD Marker pen , CD Writable , Cello tape brown big 2 inch size , Cello tape size 0.5 inch transparent , Cello tape size 1 inch transparent , Cello tape size 2 inch transparent , Cello tape red color 0.5 inch , Cello tape green color 0.5 inch , Cello tape blue color 0.5 inch , Checking pencil blue , Paper Gem clip 35 mm , Paper Gem clip 25 mm , Colin , Correction fluid pen type , Duster cloth white , Duster Cloth Yellow , DVD Rewriteable , Black DVD recordable , Envelope cloth size A4 Green , Envelope cloth size legal green , Envelope size 11 inch x 5 inch green , Envelope size 12 inch x 10 inch green , Envelope size 12 inch x 5 inch green , Envelope size 10.5 inch x 4.5 inch green , Envelope size 9 inch x 4 inch brown , Envelope size 16 inch x 6 inch brown , Envelope size 16 inch x 6 inch green , Envelope size 6 inch x 5 inch green , Envelope 16 inch x 12 inch with cloth green , Envelope 18 inch x 14 inch with cloth green , Envelope for DO letters , Eraser non dust big apsara pack of 10 Nos , Executive bond paper 90 GSM A4 size , Fevistick 15 gms , Fevicol 100 gms , File cover white duly printed office name and logo , File cover white , File cover duly printed office name and logo , L Folder , Gem clip plastic , Hand book plain as per sample , Highlighter pen five colour in each set , Mouse pad , OHP Permanent marker all colour , Paper pin T type head box , Fax roll for Panasonic machine , Steel paper cutter blade 1 inch , Steel paper cutter 1 inch , Paper punch HDP 1320 , Parcel cloth Khadi white , Sticky pad size 1.5 x 2 inch 3 colours florescent , Paper weight , Sticky pad size 3 x 3 inch , Sticky pad size 4 x 4 inch , Pen Cello flair blue 10 Nos in a packet , Pen Cello flair Black 10 Nos in a packet , Pen Cello flair Red 10 Nos in a packet , Pen add gel blue , Pen add gel black , Pen add gel red , Pen pilot V7 black , Pen pilot V7 blue , Pen pilot V7 red , Pen pilot V7 green , Pen butter flow ball pen 10 Nos in a packet , Pen white board marker black , Pen white board marker Blue , Pen white board marker Red , Pen stand for Officers , Pen stand , Pencil apsara HB , Pencil drawing B Platinum , Battery AAA 1.5V , Battery AA 1.5V , Pencil sharpener as per sample , Pencil sharpener table fixed large , Pin stapler 24 x 6mm , Pin stapler 10mm , Plotter paper 36 inch x 91cm x 100 mtr , Pocha cloth with mob stick scortch brite , Plotter paper 36 inch x 91 cm x 50 mtr , Plotter tracing paper 36 inch x 91 cm x 150 mtr , Poker wooden handle , Refill add gel pen blue , Refill add gel pen black , Register 1 QR ruled as per sample , Register 2 QR ruled as per sample , Register 3 QR ruled as per sample , Register 4 QR ruled as per sample , Register 5 QR ruled as per sample , Room Freshener , Rotaring pen 0.30mm , Rotaring pen ink , Steel scale 12 inches , Scissor big 6 inches , Scissor big 12 inches , Sketch pen set assorted colour , Stamp Pad , Stapler HD 45 Big , Stapler No 10 small , Spiral Roll all size , Stapler large size DS 12s 17 , Stick folder file A4 , Tag white cotton large , Tag best quality nylon large , Tag small , Towel for revolving chair big , Tracing paper size A3 , Tracing paper size A4 , Tray Medium size , Twine jute Nylon , Wall clock , Photocopier Paper A3 size 80 GSM , Photocopier Paper A4 size 80 GSM , Photocopier Paper Legal size 80 GSM

Details: Name of Work OFC cable laying for Electrical Power distribution SCADA network, Control and Signal cable wiring in Electrical panels in IGCAR, Kalpakkam Note : 1.This schedule must be read along with the drawing, Specification and scope of work (Section V) and General Specifications (Section VI) for complete interpretation of this scope of work quantitywise. 2.Items of work described in brief below are detailed under Specification of Work. The scope of work will not be estimated from the brief description of this schedule. 3.Rate quoted must include all components required for meeting the specification and performance requirements of the item irrespective of whether they are specifically brought out in this Schedule or not. 4.Tenderers are advised to get acquainted with the site conditions before quoting. 5.Schedule Rate Shall be firm and Overall Conditional Discount for the Total Tendered amount will not be accepted. 6. Rate Quoted Should be inclusive of all taxes including GST.

Details: Description:- 21.1providingandfixingaluminiumworkfordoors,windows,ventilatorsand partitionswithextrudedbuiltupstandardtubularsections/appropriatezsectionsandother sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.e. At Top, Bottom And Sides With required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading for Glazing / Paneling, C.p. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings andthedirectionsofengineer-in-charge.(glazing,panelinganddashfastenerstobepaidfor separately) : 21.1.1 For Fixed Portion 21.1.1.1 Anodised Aluminium (anodised Transparent Or Dyed To required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac 15)

Details: ON TURN KEY BASIS Construction of BAKHTUNI TANK PROJECT, in Manasa block of District Neemuch consisting of approximately 345 m long earthen dam and all its components with excavation & construction of Head sluice, Spill & Approach channel, Waste Weir under Unit-I Head work along with excavation, earthwork & lining of Main canal RD 0 to 2100 m and all necessary relevant structures to irrigate 300 Ha. CCA. This activity also Include survey & investigation, geological Investigation, preparation & submission of LA. Cases for Pvt. /Govt./forest land, design, drawing. estimation, DPR submission and its approval from competent authority for both Head work & canal system of BAKHTUNI TANK PROJECT, including maintenance & defect liability period of two years from date of issue of completion certificate.

Details: Description :radiator Assembly For 1400 Hp Dpc With Copper Fins And Brass Tubes To Drg.no.sr-lw-2sk-2078, Alt-2 Along With The Followi ng Detailed Drawings. 1) Sr-lw-3sk-2079, Alt-1 Radiator Core Assembly. 2)sr-lw-3sk-2080, Alt-1 Top Header. 3)sr-lw-3sk-2081, Alt-1 Bottom header. 4)srlw- 3sk-2082, Alt-1 Side Frames Lh And Rh. 5)srlw- 3sk-2083, Alt-1 Weld Mesh Guard. (or) Radiator Assembly To Cummins Part N o. 4968230. Note: Stage Inspection To Be Carried Out For Conformity Of Raw Materials. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Details: Description :switch Plate Assembly Complete With Polycarbonate Cover Frame And Powder Coated Steel Pl ate With (i) On / Off Switch 3 Nos. (ii) 3 Pin Socket, 6 A, 250 V Ac And 02 Nos.(iii) 2 Amps Glass Fuse Of M/s. ferraz Shawmut / Cooper Bussman (with Fuse Holder) 2 Nos As Per Specification No. Icf / Edml - 006, Rev. b, Drawing No. Ick / Sk/ 7/ 4/ 011, Alt. C Item No. 1. Make Acceptable : Havells / Cpl / Ssk R Series/ Oswin / sks Oem Or Authorized Dealers Only To Quote With Documentary Evidence [ Warranty Period: 12 Months A fter The Date Of Delivery ] [quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation Permitted: max 8 Lacs ] ]

Details: Description :intermediate Tube And Air Pipe Coupling Items For Schaku Coupler As Per Icf/ md/spec.207, Issue Status-01, Rev.00, With Amendment No.1 & 2. Scope Of Supply Shall Be As per Clause 2.0(2a & 3a) Of Part-a Of Icf/md/spec.207, Issue Status-01, Rev.00, With amendment No.1 & 2. Air Coupling Connection Shall Withstand Working Pressure And Tes ting Pressure Of 10.5 Kg/cm2 And 20 Kg/cm2 Respectively. Special Condition : Tenderer To Su bmit Rdso Approved Drawings At The Time Of Quoting The Tender. [ Warranty Period: 48 Mo nths After The Date Of Delivery ] [quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation permitted: Max 8 Lacs ] ]