Drawer Tenders

Description: CATEGORY: Design and Construction drawings for Civil works and MEP works , Consultancy for procurement of Climatic Chamber , Consultancy during Climate Chamber design and construction , Climatic Test on existing Rail Vehicle , Documentation and Training

Description: CATEGORY: HT STORAGE UNIT FINISHED IN LAMINATE , PROVIDING AND STORAGE UNIT FINISHED IN LAMINATE , PROVIDING AND FIXING TV UNIT WALL PANELING FINISHED IN LAMINATE AS PER DESIGN , PROVIDING AND MAKING OF STAFF WORKING DESK FINSHED IN LAMINATE FINISHED , PROVIDING AND MAKING OF SIDE RUNNER STORAGE WITH SET OF DRAWERS FINISHED IN LAMINATE , PROVIDING AND FIXING FILE STOTAGE UNIT FINISHED IN LAMINATE , PROVIDING AND FIXING FIXED PARTITION WALL FINISHED IN LAMINATE AS PER DESIGN , PROVIDING AND FIXING OF PANELING FINISHED IN LAMINATE , PROVIDING AND FIXING OF WALL PANELING BEHIND STAFF WORKING DESIGN FINISHED IN LAMINATE , PROVIDING AND MAKING BRANDING WALL PANELING FOR LIGHT FINISHED IN PAINT , PROVIDING AND MAKING FILE PRINTER AND DISPLAY STORGAE UNIT FINISHED IN LAMINATE , PROVIDING AND MAKING CONFERENCE TV UNIT WALL PANELING WITH LOW HT STORAGE UNIT FINISHED IN LAMINATE AS PER DESIGN , PROVIDING AND MAKING OF STAFF WORKSTATION AND INDOOR PLANT UNIT FINISHED IN LAMINATE , PROVIDING AND FIXING CURTAIN PELMET FINISHED IN PAINT , PROVIDING AND FIXING MODEL DISPLAY LOW HT FINISHED IN LAMINATE , PROVIDING AND FIXING PANELING ON WOODEN CEILING FINISHED IN LAMINATE , PROVIDING AND MAKING OF FIXED PARTITION WALL WITH SLIDING DOOR FINISHED IN LAMINATE , PROVIDING AND FIXING WALLPAPER AS PER DESIGN , PROVIDING AND MAKING DIRECTORS TV UNIT WALL PANELING WITH LOW HT STORAGE UNIT FINISHED IN LAMINATE AS PER DESIGN , PROVIDING AND FIXING OF DISPLAY STORAGE UNIT FINISHED IN LAMINATE AS PER DESIGN , PROVIDING AND FIXING OF PROFILE GLASS PARTITION , PROVIDING AND FIXING CONFERENCE TABLE FINISHED IN MARBLE AND METAL AS PER DESIGN , PROVIDING AND FIXING TV FIXED PARTITION WALL WITH DOOR FINISHED IN LAMINATE , PROVIDING AND FIXING OF FILE STORAGE SHELF FINISHED IN LAMINATE , PROVIDING AND FIXING LIFT DUCT DOOR FINISHED IN LAMINATE , PROVIDING AND FIXING CEILING RAFTERS FINISHED IN LAMINATE , PROVIDING AND FIXING FIXED PARTITION WALL WITH DOOR FINISHED IN LAMINATE , PROVIDING AND FIXING FILE STORAGE UNIT FINISHED IN LAMINATE , PROVIDING AND FIXING PIPE COVERING FINISHED IN ACP , PROVIDING AND FIXING NEW DOOR FINSIHED IN LAMIANTE , PROVIDING AND FIXING VANITY COUNTER STORAGE FINISHED IN LAMINATE , PROVIDING AND FIXING DUCT PIPE COVERING FINISHED IN ACP SHEET , PROVIDING AND FIXING MIRROR , BLINDS FOR ALL AREAS , HARDWARE FITTINGS HANDLE_KNOBS_LOCKS_DOOR STOPPERS_AUTOCLOSER

Description: CATEGORY: Correspondence Envelopes (V2) (Q4) , Packaging Tape (Q4) , Desk Pads - Writing (V2) (Q4) , Rollerball Pen (V3) (Q4) , Gel Pen (V3) (Q4) , Photography Paper (V2) (Q4) , Drawing Pins (V2) as per IS 5205 (Q4) , Stapler Pin / Staples (V2) (Q4) , Register (V2) (Q4)

Description: Roof Ladder Suitable For Electric Locomotive As Per Clw Drawing No. 1209- 10.240.030. Note: Sample To Be Approved From Consignee Before Supply.

Description: High Capacity Locomotive Side Buffer Assembly As Per Rdso Specification No. Mp- 0.41.00.03(rev 02) Of Nov 2022 And Drawing No. Skdl 4725 Or Latest

Description: Corrugated Flexible Ducting For Machine Room Ventilation As Per Clw Drawing No. 1209-11.344-051 Alt1 Or Latest.

Description: Scrap Ferrous Cast Steel Consisting Of Face - Plate, Axle Box Housing & Cover, End & Rear- Cover, Anvil, Buffer Socket & Plunger,gears, Crank / Cam Shaft With Or W/o Connecting Rod, Anti Roll Bar With C.i.,bogi Bolister, Brake Shoe- Head,brake Cylinder,pivot Top & Bottom, Wide & Narrow Jaw Adopter,knuckle, Screw- Coupling & Its Parts, Coupler Body & Its Parts, Control Arm Link,bearing Coller & Cone,hanger- Bracket,pin, M.s Chain,iron D.v.,draft Gear Pad, P.u.pad,impeller,motor Suspension Tube, Lower Beam Arrangement Seat,small Lever & Pull Rod,cartridge Roller Bearing, Supporting- Device, Connecting Rod,draw Bar Hooks, & Other Various Items Released From Loco, Carriage, Trd, Tmc, Electric,sig.,& P.way Of Sorts & Sizes With Steel, C.i.& Neg.n.f.attachment If Any. Note- 1- L.b.p. 2- Cutting Not Allowed. Location: Lying In Bin No-a-6 Near L/n-10

Description: BOQ ITEMS: Supply and Fixing fine sand at site including royalty and carriage for preparing compost as per specified in specification documents, Supply and Fixing sweet good earth at site including royalty and carriage for preparing compost for pits requiredas per specified in specification documents, Supply and Fixing manure at site including royalty and carriage for preparing compost as per specified in specification documents, M and L for Preparing compost pits of as per specified in specification documents, Preparing compost pits of size per specified in specification documents, Supply and planting following trees in location where shown on drawing per specified in specification documents a ALBIZZIA LEEBEK 6 Height, b ALSONIA SCHOLARIS 6 Height, c BAUHINIA PURPUREA 4 Height, d CARYOTA URENS 6 Height, e ERYTHRINA INDICA 6 Height, f FICUS INFECTORIA 6 Height, g LAGERSTOEMIA FLOS REGIME 6 Height, h PUMERIA ALBA 6 Height, J ROYSTONEA REGIA 6 Height, k SHOREA ROBUSTA 4 Height, 0 PLUMERIA RUBRA 6 Height, m BAMBUSA VALGARISA 6 Height, n BOTTLE PALM 4 Height, 0 ASHOKA PENDULA 4 to 6 Height, Supply and planting shrubs in location where shown on drawing and described in scheduleper specified in specification documents, M and L 60 mm thick precast cement concrete per specified in specification documents, Excavation over areas not exc 1 5m deep and getting out soft loose soil per specified in specification documents, Returning filling in including spreading leveling watering and well ramming in layers n exc 25cm, S and F 25MM GI tubing medium grade galvanised with allper specified in specification documents, Ditto but 20 mm of size, S and F sprinklers of cast brass alloy 25 mm dia with per specified in specification documents, S and F 15mm bore chromium plated fancy type bib taps long body with crutch or butterfly handle per specified in specification documents, S and F GI union socket of 25 mm complete all as specified and directed, S and F 20mm dia low density polyethylene pipe LDPE pressure rating 6kg Sqcm per specified in specification documents

Description: Leather Bellow For Medha Traction Motor As Per Drawing No. Wr/mx/el-2020 4-poh- tmc-002.

Description: 371000310027 liner 240 X 25 X 3 Mm For Side Frame Column Sides. Drawing No. Fig.-25, Para-5.3.3 Of G-95 (rev-1) With Amend. No-5. Mat. & Spec. : [1] Wd-2 1-casnub-22nlb-bogie-93, Rev-2 With Amendment No-5.[2] Is;3885, Part 1,gr. Iv, Hardness 380-420 Bhn. [ Warranty Period: 30 Months After The Date Of D elivery ] ] consignee Sr. Section Engineer ( C&w ) Gandhidham, Wr Gujarat 8000.00 Numbers uvam Item Ref. ( Item Id :- 3100432 - Silico- Manganese & Manganese Steel Liners & Wear Plates For Bogie And Couplers ) inspection Details Stage Inspection Not Required