Consumables Tenders

Details: Description:- Comprehensivemaintenancecontractofelectronicinterlockingofmedhamake installed At Satrod Junction Over Bikaner Division As Per Rdso Specification Rdso/spn/192/2019, ver 2.0. This Includes Maintenance Of Complete Equipment Along With All Subsytems Like Cpu's And all The Requisite Cards Of The Ei System, Interface Equipments With Field Signalling Gears, And Relay Of electronic Field Interface Equipment/object Controller For Interface With The Field Signalling Gears, maintenance Terminal With Cpu's, Keyboard, Ups & Printer, Operator Panel Interface Etc. The Amc would Be Completely Comprehensive Which Means Supply And Installation Of All Parts Or Components whether Consumable Or Otherwise Required To Put Right The System.

Details: Description:- Clearing Of Tracks Including Cess/slopes Etc. Up To Railway Boundary On Either Side along The Track Running Meter By Removing /picking Up All Muck, Garbage, Plastic & Paper Waste strewn And Other Materials Such As Glass / Plastic Water Bottles, Tea Cups, Plastic Cover Bags, Dead animals, Grass Etc. And Disposing The Same Away From The Railway Limit Without Disturbing The Cess, ballast, Track & Track Fitting Sets. With All Contractor's Materials , Labour, Transportation, Tools & plants,lead & Lift, Consumables, Loading & Unloading Etc. With All Contractors Own Safety, Risk And Cost ofalllabourworkingintherunningtrackandaspertheinstructionsofengineer-in-charge. conditions: A) The Track Should Be Kept Clean. B) The Clearing Work Should Be Done Under Running condition Of Trains . No Block Will Be Provided By The Railways. C) Before Commencement Of The Work, the Staff Should Report To The Concerned Section Engineer I.e Sse/p.way Or Sse/works And Take permission /endorsement In Daily Field Books . D) While On Duty Proper Authority Letter/ Indent Card should Be Carry To Avoid Complication During Inspection By The Higher Officials. E) No Track Materials should Be Removed /carried From The Track. F) Safety Of The Men Who Working On The Track And surrounds Rest With Contractors. No Compensation Will Be Made By The Railway To The Staff Who Met with Anaccidents During Work. G) Track Running Metre Means Length Along The Track Up To The Railway boundary On Both Up & Down Line Sides .

Description: BOQ ITEMS: DENSIMETER NO/NC 0.75MPA(ABS) GL316 1A2L , PRESSURE GAUGE -1 TO 9 BAR , SF6 GAS CYLINDER - 25 KG (AS PER IEC 60376), JOINT TORIQUE R12, BAGUE R21 NT1932 S667, JOINT TORIQUE R22 A29.3 D3.6, BAGUE R9 M146, RI 12.37 x 2.62 EPDM -50, O-RING D 31.4 D 0.62, O-RING D 23.4 D 3.53, BAGUE R82 NT1932 S667, SECURITY COVER GASKET, JOINT ISOLATEUR D316( for 245KV and above chamber insulator gasket), INSUALTOR GASKET D226(suppot insulators for 245KV and above), Trip/Close Coil, 220V DC, Trip Magnet Assy FK3-1 , Close Magnet Assy FK3-1 , Aux Contact Assy 16 NO+16 NC, Motor Limit Switch (4NO+ 4NC), Plastic Gear Assy With Bearings, Spring Charging Motor 220 VAC/DC, OPERATION COUNTER, Dashpot Assembly FK3-1CK, View Glass with Beading, Sealing Ring (Rain Sheild), Crank Wheel Assy FK 3-1 CK, Roller Lever Assy for FK 3-1 CK, Trip latch stage 1 with spring/FK3-1 CK, Trip Latch Assy Stage 2 for FK 3-1 CK, Close Latch for FK3-1 CK, Freewheel assembly with Bearing FK3-1CK, NRB Assy for FK3-1 CK, Manual Charging Gear Assy FK3-1CK, LOC-OFF-REM SWITCH LOCKABLE, AC CONTACTOR 230V 2NO+2NC, ADD ON BLOCK 1NO+1NC, DC CONTROL SWITCH, POLE DISCREPANCY RELAY- VTT11 , SIEMENS TIMER 0.05 to 100hrs -24 v 240 AC/DC, POLE/DISCREPANCY TIMER 3RP15 25-1BW30 8K, PUSH BUTTON (1 FULL SET), DC MCB 6A DP, Reinforced Rubber Beading for LCC(1CB 10 MTR), CONSUMABLE KIT, Each Kit Contains Molykote 111 (100 grams), Loctite 8103 (25grams) Molykote PG54 (25grams) Contactal Grease, Loctite 243 Thread Removable Locker (25ml) Loctite 262 Thread, mobilex bt3 (100grams) permanent Locker (25ml),, GLATTOL 4130 982 (Shell Alvania (200 Gm))

Details: Description:- Drilling And Sinking Of Deep Tubewell Of Size 250x200mm, Dia In All Classes Of Soil including Supplying And Sinking Of Standard High Density Polytheylene (upvc) Casin Pipe Of Per Is 4985 Of Sige 200mm Internal Dia In Loose Starta Extended Minimum 1m (one ) Metre Inside Hard Rock to Prevent Collapsing Of Bore. The Bottom Bore Hole Should Be Of Size 200,mm Dia Clear Internal Dia for A Minimum Defth Of 100m Below Ground Level. The Rate Shall Include Supplying And Fixing M.s.cap at Top Of Bore Well, Labour, Machinery, Materials, Consumable Item, Leading, Loading, Unloading, Lead, lift, In All Respect Complete. The Rate Shall Also Include Development Of Bore By Compressor And testing Of Yield 03 Consecutive Days For A Minimum 07 Hrs. On Each Day Continuously With Minimum 3000gph. The Pump Will Be Supplied By Contractor For Testing The Yield. (excluding Station Dhn) (no water No Payment).

Details: CATEGORY: Custom Bid for Services - Provision of manpower for OBHS in Vande Bharat Rakes Rates inclusive of GST , Custom Bid for Services - Provision of consumable material for OBHS during passenger services in Vande Bharat Rakes Rates inclusive of GST , Custom Bid for Services - Provision for cleaning of coach interior during Primary cleaning and watering of Vande Bharat Rakes including manpower and materials Rates inclusive of GST , Custom Bid for Services - Provision for cleaning of coach exterior during Primary cleaning and watering of Vande Bharat Rakes including manpower and materials Rates inclusive of GST , Custom Bid for Services - Provision for cleaning of coach interior during depot examination intensive cleaning and watering of Vande Bharat Express including manpower and materials Rates inclusive of GST , Custom Bid for Services - Provision for cleaning of coach exterior during depot examination intensive cleaning and watering of Vande Bharat Express including manpower and materials Rates inclusive of GST , Custom Bid for Services - Provision for exterior and interior cleaning intensive cleaning of Vande Bharat Model installed at Rail Bhavan New Delhi including manpower and materials Rates inclusive of GST

Details: Construction of DRA Storage Shed and Material Storage Shed at SERPL Bhubaneswar Pump Station NOTE 1. Please enable macros before filling the rates to see the quoted figures in words. 2. The bidder shall quote firm prices “Excess(+)/ At Par/ Less(-)” against the rates mentioned in the price schedule provided in BoQ1 sheet as per instructions provided herein after taking into account all the tender terms and conditions and scope of work. In case rates are quoted to more than 2 decimal places then, the amount quoted towards the tender shall be worked out for the rates quoted to first 2 decimal points without rounding off. 3. Only "Bidder Name", "Excess (+) or "At Par" or Less (-)" & "Percentage" are to be filled by the bidder in the designated "Sky Blue cells". For "At Par" selection, the percentage quoted shall be treated as 0.00 and quoted amount at par with estimate. 4. "Excess (+)" or "At Par" or "Less (-)" can be selected from the dropdown menu by clicking on the cell. 5. No changes shall be made by the bidder to S.No., Unit, Quantity. 6. In case of any difference in item description/ unit/ quantity in BOQ, then the item description/ unit/ quantity given in the tender document shall prevail. 7.The rates quoted by the tenderer shall include all cost towards equipment, labour & laboratory back-up, logistics, transport, spares, tools, tackles, consumables, etc., travel and stay arrangements and other incidentals including supply of materials as may be necessary for rendering the services as per detailed specifications. 8. Goods and Services tax as per GST Act 2017 for concerned services has been added to the base price of below mentioned services. If the bidder wishes to quote some other Goods and Services tax rate other than mentioned in the price schedule provided in BoQ1 sheet, they may quote the same in "Annexure H". Statutory variation on Goods and Services Tax as applicable for the category/ service shall be to Owner’s account up to the contractual completion period. Reverse charges mechanism on Goods and Services tax amount shall be applicable as per Govt. rules. 9. Bidders are advised strictly not to alter or change the BOQ format/ contents. Bidders are also advised not to paste any image file or put any additional conditions in the BOQ work sheet. 10. Please select the applicable rate of GST in cell 'W13'. Rate selected shall be applicable for the entire BoQ. Abbreviations of Units: SQM - Square Meter, MON - Month, HR - hours, LS - Lumpsum, EA - Each, CUM - Cubic Meter, KG - Kilogram, SQFT - Squarefoot, M - Meter

Details: Annual Rate Contract for Housekeeping and Maintenance Works in Atchuthapuram delivery station NOTE 1. Please enable macros before filling the rates to see the quoted figures in words. 2. The bidder shall quote firm prices “Excess(+)/ At Par/ Less(-)” against the rates mentioned in the price schedule provided in BoQ1 sheet as per instructions provided herein after taking into account all the tender terms and conditions and scope of work. In case rates are quoted to more than 2 decimal places then, the amount quoted towards the tender shall be worked out for the rates quoted to first 2 decimal points without rounding off. 3. Only "Bidder Name", "Excess (+) or "At Par" or Less (-)" & "Percentage" are to be filled by the bidder in the designated "Sky Blue cells". For "At Par" selection, the percentage quoted shall be treated as 0.00 and quoted amount at par with estimate. 4. "Excess (+)" or "At Par" or "Less (-)" can be selected from the dropdown menu by clicking on the cell. 5. No changes shall be made by the bidder to S.No., Unit, Quantity. 6. In case of any difference in item description/ unit/ quantity in BOQ, then the item description/ unit/ quantity given in the tender document shall prevail. 7.The rates quoted by the tenderer shall include all cost towards equipment, labour & laboratory back-up, logistics, transport, spares, tools, tackles, consumables, etc., travel and stay arrangements and other incidentals including supply of materials as may be necessary for rendering the services as per detailed specifications. 8. Goods and Services tax as per GST Act 2017 for concerned services has been added to the base price of below mentioned services. If the bidder wishes to quote some other Goods and Services tax rate other than mentioned in the price schedule provided in BoQ1 sheet, they may quote the same in "Annexure H". Statutory variation on Goods and Services Tax as applicable for the category/ service shall be to Owner’s account up to the contractual completion period. Reverse charges mechanism on Goods and Services tax amount shall be applicable as per Govt. rules. 9. Bidders are advised strictly not to alter or change the BOQ format/ contents. Bidders are also advised not to paste any image file or put any additional conditions in the BOQ work sheet. 10. Please select the applicable rate of GST in cell 'W13'. Rate selected shall be applicable for the entire BoQ. Abbreviations of Units: SQM - Square Meter, MON - Month, H - hours, LS - Lumpsum, EA - Each, CUM - Cubic Meter, KG - Kilogram, SQFT - Squarefoot, M - Meter, DAY - Days

Details: Supply, Installation, Testing and Commissioning of CCTV cameras at SERPL Jharsuguda station NOTE 1. Please enable macros before filling the rates to see the quoted figures in words. 2. The bidder shall quote firm prices “Excess(+)/ At Par/ Less(-)” against the rates mentioned in the price schedule provided in BoQ1 sheet as per instructions provided herein after taking into account all the tender terms and conditions and scope of work. In case rates are quoted to more than 2 decimal places then, the amount quoted towards the tender shall be worked out for the rates quoted to first 2 decimal points without rounding off. 3. Only "Bidder Name", "Excess (+) or "At Par" or Less (-)" & "Percentage" are to be filled by the bidder in the designated "Sky Blue cells". For "At Par" selection, the percentage quoted shall be treated as 0.00 and quoted amount at par with estimate. 4. "Excess (+)" or "At Par" or "Less (-)" can be selected from the dropdown menu by clicking on the cell. 5. No changes shall be made by the bidder to S.No., Unit, Quantity. 6. In case of any difference in item description/ unit/ quantity in BOQ, then the item description/ unit/ quantity given in the tender document shall prevail. 7.The rates quoted by the tenderer shall include all cost towards equipment, labour & laboratory back-up, logistics, transport, spares, tools, tackles, consumables, etc., travel and stay arrangements and other incidentals including supply of materials as may be necessary for rendering the services as per detailed specifications. 8. Goods and Services tax as per GST Act 2017 for concerned services has been added to the base price of below mentioned services. If the bidder wishes to quote some other Goods and Services tax rate other than mentioned in the price schedule provided in BoQ1 sheet, they may quote the same in "Annexure 8". Statutory variation on Goods and Services Tax as applicable for the category/ service shall be to Owner’s account up to the contractual completion period. Reverse charges mechanism on Goods and Services tax amount shall be applicable as per Govt. rules. 9. Bidders are advised strictly not to alter or change the BOQ format/ contents. Bidders are also advised not to paste any image file or put any additional conditions in the BOQ work sheet. Abbreviations of Units: SET - SET, KM - Kilometer, LS - Lumpsum, SU - Service unit, M - Meter, M2 - Square Meter, SQM - Square Meter, M3 - Cubic Meter, CUM - Cubic Meter, FT2 - Square Foot, BAG - Bag, KG - Kilogram, QN - Quintal, TO - Tonne, L - Liter

Details: External Painting of Crude Oil Storage Tanks at PHBPL Paradip NOTE 1. Please enable macros before filling the rates to see the quoted figures in words. 2. The bidder shall quote firm prices “Excess(+)/ At Par/ Less(-)” against the rates mentioned in the price schedule provided in BoQ1 sheet as per instructions provided herein after taking into account all the tender terms and conditions and scope of work. In case rates are quoted to more than 2 decimal places then, the amount quoted towards the tender shall be worked out for the rates quoted to first 2 decimal points without rounding off. 3. Only "Bidder Name", "Excess (+) or "At Par" or Less (-)" & "Percentage" are to be filled by the bidder in the designated "Sky Blue cells". For "At Par" selection, the percentage quoted shall be treated as 0.00 and quoted amount at par with estimate. 4. "Excess (+)" or "At Par" or "Less (-)" can be selected from the dropdown menu by clicking on the cell. 5. No changes shall be made by the bidder to S.No., Unit, Quantity. 6. In case of any difference in item description/ unit/ quantity in BOQ, then the item description/ unit/ quantity given in the tender document shall prevail. 7.The rates quoted by the tenderer shall include all cost towards equipment, labour & laboratory back-up, logistics, transport, spares, tools, tackles, consumables, etc., travel and stay arrangements and other incidentals including supply of materials as may be necessary for rendering the services as per detailed specifications. 8. Goods and Services tax as per GST Act 2017 for concerned services has been added to the base price of below mentioned services. If the bidder wishes to quote some other Goods and Services tax rate other than mentioned in the price schedule provided in BoQ1 sheet, they may quote the same in "Annexure H". Statutory variation on Goods and Services Tax as applicable for the category/ service shall be to Owner’s account up to the contractual completion period. Reverse charges mechanism on Goods and Services tax amount shall be applicable as per Govt. rules. 9. Bidders are advised strictly not to alter or change the BOQ format/ contents. Bidders are also advised not to paste any image file or put any additional conditions in the BOQ work sheet. 10. Please select the applicable rate of GST in cell 'W13'. Rate selected shall be applicable for the entire BoQ. Abbreviations of Units: SQM - Square Meter, LS - Lumpsum

Details: Annual Rate Contract for Upkeep of Mechanical equipment & accessories in pump station at PHBPL, Paradip NOTE: 1. Please enable macros before filling the rates to see the quoted figures in words. 2. The bidder shall quote firm prices “Excess(+)/ At Par/ Less(-)” against the rates mentioned in the price schedule provided in BoQ1 sheet as per instructions provided herein after taking into account all the tender terms and conditions and scope of work. In case rates are quoted to more than 2 decimal places then, the amount quoted towards the tender shall be worked out for the rates quoted to first 2 decimal points without rounding off. 3. Only "Bidder Name", "Excess (+) or "At Par" or Less (-)" & "Percentage" are to be filled by the bidder in the designated "Sky Blue cells". For "At Par" selection, the percentage quoted shall be treated as 0.00 and quoted amount at par with estimate. 4. "Excess (+)" or "At Par" or "Less (-)" can be selected from the dropdown menu by clicking on the cell. 5. No changes shall be made by the bidder to S.No., Unit, Quantity. 6. In case of any difference in item description/ unit/ quantity in BOQ, then the item description/ unit/ quantity given in the tender document shall prevail. 7.The rates quoted by the tenderer shall include all cost towards equipment, labour & laboratory back-up, logistics, transport, spares, tools, tackles, consumables, etc., travel and stay arrangements and other incidentals including supply of materials as may be necessary for rendering the services as per detailed specifications. 8. Goods and Services tax as per GST Act 2017 for concerned services has been added to the base price of below mentioned services. If the bidder wishes to quote some other Goods and Services tax rate other than mentioned in the price schedule provided in BoQ1 sheet, they may quote the same in "Annexure H". Statutory variation on Goods and Services Tax as applicable for the category/ service shall be to Owner’s account up to the contractual completion period. Reverse charges mechanism on Goods and Services tax amount shall be applicable as per Govt. rules. 9. Bidders are advised strictly not to alter or change the BOQ format/ contents. Bidders are also advised not to paste any image file or put any additional conditions in the BOQ work sheet. 10. Please select the applicable rate of GST in cell 'W13'. Rate selected shall be applicable for the entire BoQ. Abbreviations of Units: SQM - Square Meter, MON - Month, HR - hours, LS - Lumpsum, EA - Each, CUM - Cubic Meter, KG - Kilogram, SQFT - Squarefoot, M - Meter, D - Days, YR - Years, Num - Number, SET - SET