Consumables Tenders

Details: Description:- Flash Butt Welding Of 60kg/52kg (90/72 Uts)/ 90r (sh) Rails/rail Panels, Including usfd Testing Of Welded Joint, Confirming To Indian Railway Manual For Flsh Butt Welding And Indian railway Manul For Ultrasonic Testing Of Rails And Welds Using Contractor's Own Mobile Flash Butt welding Plant And Usfd Machine, In Situ On Non Running Line/running Line Or Cess/ballasted Bed In New line / Gauge Conversion/doubling Project/existing Lines, At Location Decided By Railway. The Quoted rate Shall Be Inclusive Of Freight Of Mobile Flach Butt Welding Plant With All Necessary Accessories, All labour,material,consumable,pre-straighteningofrails,matchingtherailasperrailends, preparation For Welding Algning/positioning, Stripping Of Rail Joint, Grinding And Finishing Of Joint, segregating Defective Reail Post - Straightening Of Joint Where Ever Necessary, Handling/ Leading Of rails/ Rail Panels To Weldng Site, Removing And Prefixing Of Fittings/fastenings Where Ever Required, cost Of Necessary Test Required For Quality Control As Mentioned In Special Condition Of Contract including All Arrrangements Of Labour, Consumable Etc. All Complete As Per Direction Of Engineer.

Details: COLLECTION OF USER FEE THROUGH FEE COLLECTING AGENCY ON THE BASIS OF COMPETITIVE BIDDING ON E-TENDER BASIS AT TARANA FEE PLAZA FOR THE USE OF FOUR LANING OF DHROL-BHADRA PATIYA SECTION OF NH-151 A (BETWEEN EX. KM 5+700 TO KM 13+600 OF SH-25) AND BHADRA PATIYA -PIPALIYA SECTION OF NH-151A (BETWEEN EX. KM 73+000 TO KM 44+800 AND EX. KM 38+350 TO 24+000 OF CSH-6) IN GUJARAT & UPKEEP/ MAINTENANCE OF ADJACENT TOILET BLOCKS INCLUDING RECOUPING THE CONSUMABLE ITEMS

Details: Description:- Comprehensivemaintenancecontractofelectronicinterlockingofmedhamake installed At Satrod Junction Over Bikaner Division As Per Rdso Specification Rdso/spn/192/2019, ver 2.0. This Includes Maintenance Of Complete Equipment Along With All Subsytems Like Cpu's And all The Requisite Cards Of The Ei System, Interface Equipments With Field Signalling Gears, And Relay Of electronic Field Interface Equipment/object Controller For Interface With The Field Signalling Gears, maintenance Terminal With Cpu's, Keyboard, Ups & Printer, Operator Panel Interface Etc. The Amc would Be Completely Comprehensive Which Means Supply And Installation Of All Parts Or Components whether Consumable Or Otherwise Required To Put Right The System.

Details: Description :design, Manufacture, Supply, Installation, Integrated Testing Commissioning And Proving Out Of F ully Automatic Pit Jacks. It Includes All The Accessories/ Equipments And Other Concomitant Accessories/ Equipm ent, Which The Manufacturer Considers Essential To Make The Machine Fully Operational, When Installed And Com missioned. It Shall Also Include Installation And Commissioning Of Related Equipment, Training Of Personnel In Op eration And Maintenance Of Machine And Supply Of Technical Documentation. The Requirement Of Any Utility Etc. should Be Clearly Indicated By The Tenderer In The Offer.details Of Requirement Will Be As Per Attached specification Attached With This Tender. This Is As Per Para 2 Of Specification No. Nwr/hq/m/works/164-item no. 2 Of Attached Specification With Tender. This Shall Also Include Supply Of Commissioning Spares, Maintenanc e Spares And Consumables As Defined In Clause 2.2 Of Special Conditions Of Contract And Tools & Spares As Defin ed In Clause 13 & 14 Respectively Of Specification No. Nwr/hq/m/works/164-item No. 2 Of Annexure- Specificati ons Appended With Tender. Performing The Entire Civil Foundation Work, Including Reinforcement And Other Struc tural Aspects Related To The Pit Jack Are Under The Scope Of Pit Jack Supplier. Any Special Materials Required For G routing/ Foundation Or Interconnection Shall Be Supplied By The Contractor Along With The Instruction To Use. (an y Additional Items Like Chequred Plates, Stairs, Railings Etc Which Are Part Of Civil Structure And Essentially Requir ed Towards Completeness, Maintenance, Operations Etc Of M&p, Shall Be Covered In Scope Of Supplier) Allied Ele ctrical & Mechanical Works Shall Be Included In The Cost Of The Machine. ]

Details: A.scope Of Work Covers Supply, Installation And Commissioning Of Spm Analyzers (dust/opacity Monitors) At Outlet Of Esp Hoppers Id Fan Ducts Of Rtps Units-5,6&8.b)materials Supply Shall Be Completed In All Respect Within The Stipulated Period As Per The Contract. Materials Shall Be Delivered To Rtps Site Through Ee(stores)o&m. Unloading Of Materials At Rtps Site Location And Shifting Of The Same To Work Location Is Under The Contractor/agency Scope Only.c)the Installation And Commissioning Of All The Supplied Materials And Ensuring Satisfactory Performance Of The Commissioned System At Rtps Site Shall Be On The Basis Of Single Point Responsibility, Completely Covering The Activities And Services In Respect Of All The Equipment & Works Specified And Covered Under The Specifications.d)handling, Shifting, Unpacking And Erection And Commissioning Of The Entire System Shall Be Under The Scope Of Bidder Itself. E)all Required Consumables, Hardware And Software, Accessories, Providing Mounting Flanges/fixtures For The Installation Of Spm Analyzers (dust/opacity Monitors) Along With Fabrication And Welding Of Materials Required During Installation Works And Providing Any Other Materials Required Which Are Not Included In The Scope For Successful Installation And Commissioning Of The Spm Analyzers (dust/opacity Monitors) At Outlet Of Esp Hoppers Id Fan Ducts Of Rtps Units-5,6&8 Are Under The Contractor/agency Itself.f)all The Materials Required For The Installation And Commissioning Of Spm Analyzers (dust/opacity Monitors) At Outlet Of Esp Hoppers Id Fan Ducts Of Rtps Units - 5,6&8 Shall Be Provided As Detailed Under The Technical Specifications.g)warranty All The Materials Supplied Shall Cover A Warranty For A Period Of 12 Months From The Date Of Commissioning Or 18 Months From The Date Of Supply. Any Faulty Items/spares Observed During This Period Shall Be Replaced At Free Of Cost.

Details: Description:- Drilling And Sinking Of Deep Tubewell Of Size 250x200mm, Dia In All Classes Of Soil including Supplying And Sinking Of Standard High Density Polytheylene (upvc) Casin Pipe Of Per Is 4985 Of Sige 200mm Internal Dia In Loose Starta Extended Minimum 1m (one ) Metre Inside Hard Rock to Prevent Collapsing Of Bore. The Bottom Bore Hole Should Be Of Size 200,mm Dia Clear Internal Dia for A Minimum Defth Of 100m Below Ground Level. The Rate Shall Include Supplying And Fixing M.s.cap at Top Of Bore Well, Labour, Machinery, Materials, Consumable Item, Leading, Loading, Unloading, Lead, lift, In All Respect Complete. The Rate Shall Also Include Development Of Bore By Compressor And testing Of Yield 03 Consecutive Days For A Minimum 07 Hrs. On Each Day Continuously With Minimum 3000gph. The Pump Will Be Supplied By Contractor For Testing The Yield. (excluding Station Dhn) (no water No Payment).

Description: BOQ ITEMS: DENSIMETER NO/NC 0.75MPA(ABS) GL316 1A2L , PRESSURE GAUGE -1 TO 9 BAR , SF6 GAS CYLINDER - 25 KG (AS PER IEC 60376), JOINT TORIQUE R12, BAGUE R21 NT1932 S667, JOINT TORIQUE R22 A29.3 D3.6, BAGUE R9 M146, RI 12.37 x 2.62 EPDM -50, O-RING D 31.4 D 0.62, O-RING D 23.4 D 3.53, BAGUE R82 NT1932 S667, SECURITY COVER GASKET, JOINT ISOLATEUR D316( for 245KV and above chamber insulator gasket), INSUALTOR GASKET D226(suppot insulators for 245KV and above), Trip/Close Coil, 220V DC, Trip Magnet Assy FK3-1 , Close Magnet Assy FK3-1 , Aux Contact Assy 16 NO+16 NC, Motor Limit Switch (4NO+ 4NC), Plastic Gear Assy With Bearings, Spring Charging Motor 220 VAC/DC, OPERATION COUNTER, Dashpot Assembly FK3-1CK, View Glass with Beading, Sealing Ring (Rain Sheild), Crank Wheel Assy FK 3-1 CK, Roller Lever Assy for FK 3-1 CK, Trip latch stage 1 with spring/FK3-1 CK, Trip Latch Assy Stage 2 for FK 3-1 CK, Close Latch for FK3-1 CK, Freewheel assembly with Bearing FK3-1CK, NRB Assy for FK3-1 CK, Manual Charging Gear Assy FK3-1CK, LOC-OFF-REM SWITCH LOCKABLE, AC CONTACTOR 230V 2NO+2NC, ADD ON BLOCK 1NO+1NC, DC CONTROL SWITCH, POLE DISCREPANCY RELAY- VTT11 , SIEMENS TIMER 0.05 to 100hrs -24 v 240 AC/DC, POLE/DISCREPANCY TIMER 3RP15 25-1BW30 8K, PUSH BUTTON (1 FULL SET), DC MCB 6A DP, Reinforced Rubber Beading for LCC(1CB 10 MTR), CONSUMABLE KIT, Each Kit Contains Molykote 111 (100 grams), Loctite 8103 (25grams) Molykote PG54 (25grams) Contactal Grease, Loctite 243 Thread Removable Locker (25ml) Loctite 262 Thread, mobilex bt3 (100grams) permanent Locker (25ml),, GLATTOL 4130 982 (Shell Alvania (200 Gm))

Details: Supply, Installation, Testing and Commissioning of CCTV cameras at SERPL Jharsuguda station NOTE 1. Please enable macros before filling the rates to see the quoted figures in words. 2. The bidder shall quote firm prices “Excess(+)/ At Par/ Less(-)” against the rates mentioned in the price schedule provided in BoQ1 sheet as per instructions provided herein after taking into account all the tender terms and conditions and scope of work. In case rates are quoted to more than 2 decimal places then, the amount quoted towards the tender shall be worked out for the rates quoted to first 2 decimal points without rounding off. 3. Only "Bidder Name", "Excess (+) or "At Par" or Less (-)" & "Percentage" are to be filled by the bidder in the designated "Sky Blue cells". For "At Par" selection, the percentage quoted shall be treated as 0.00 and quoted amount at par with estimate. 4. "Excess (+)" or "At Par" or "Less (-)" can be selected from the dropdown menu by clicking on the cell. 5. No changes shall be made by the bidder to S.No., Unit, Quantity. 6. In case of any difference in item description/ unit/ quantity in BOQ, then the item description/ unit/ quantity given in the tender document shall prevail. 7.The rates quoted by the tenderer shall include all cost towards equipment, labour & laboratory back-up, logistics, transport, spares, tools, tackles, consumables, etc., travel and stay arrangements and other incidentals including supply of materials as may be necessary for rendering the services as per detailed specifications. 8. Goods and Services tax as per GST Act 2017 for concerned services has been added to the base price of below mentioned services. If the bidder wishes to quote some other Goods and Services tax rate other than mentioned in the price schedule provided in BoQ1 sheet, they may quote the same in "Annexure 8". Statutory variation on Goods and Services Tax as applicable for the category/ service shall be to Owner’s account up to the contractual completion period. Reverse charges mechanism on Goods and Services tax amount shall be applicable as per Govt. rules. 9. Bidders are advised strictly not to alter or change the BOQ format/ contents. Bidders are also advised not to paste any image file or put any additional conditions in the BOQ work sheet. Abbreviations of Units: SET - SET, KM - Kilometer, LS - Lumpsum, SU - Service unit, M - Meter, M2 - Square Meter, SQM - Square Meter, M3 - Cubic Meter, CUM - Cubic Meter, FT2 - Square Foot, BAG - Bag, KG - Kilogram, QN - Quintal, TO - Tonne, L - Liter

Details: External Painting of Crude Oil Storage Tanks at PHBPL Paradip NOTE 1. Please enable macros before filling the rates to see the quoted figures in words. 2. The bidder shall quote firm prices “Excess(+)/ At Par/ Less(-)” against the rates mentioned in the price schedule provided in BoQ1 sheet as per instructions provided herein after taking into account all the tender terms and conditions and scope of work. In case rates are quoted to more than 2 decimal places then, the amount quoted towards the tender shall be worked out for the rates quoted to first 2 decimal points without rounding off. 3. Only "Bidder Name", "Excess (+) or "At Par" or Less (-)" & "Percentage" are to be filled by the bidder in the designated "Sky Blue cells". For "At Par" selection, the percentage quoted shall be treated as 0.00 and quoted amount at par with estimate. 4. "Excess (+)" or "At Par" or "Less (-)" can be selected from the dropdown menu by clicking on the cell. 5. No changes shall be made by the bidder to S.No., Unit, Quantity. 6. In case of any difference in item description/ unit/ quantity in BOQ, then the item description/ unit/ quantity given in the tender document shall prevail. 7.The rates quoted by the tenderer shall include all cost towards equipment, labour & laboratory back-up, logistics, transport, spares, tools, tackles, consumables, etc., travel and stay arrangements and other incidentals including supply of materials as may be necessary for rendering the services as per detailed specifications. 8. Goods and Services tax as per GST Act 2017 for concerned services has been added to the base price of below mentioned services. If the bidder wishes to quote some other Goods and Services tax rate other than mentioned in the price schedule provided in BoQ1 sheet, they may quote the same in "Annexure H". Statutory variation on Goods and Services Tax as applicable for the category/ service shall be to Owner’s account up to the contractual completion period. Reverse charges mechanism on Goods and Services tax amount shall be applicable as per Govt. rules. 9. Bidders are advised strictly not to alter or change the BOQ format/ contents. Bidders are also advised not to paste any image file or put any additional conditions in the BOQ work sheet. 10. Please select the applicable rate of GST in cell 'W13'. Rate selected shall be applicable for the entire BoQ. Abbreviations of Units: SQM - Square Meter, LS - Lumpsum

Details: TRV installation works at Stations under Sambalpur Base namely SERPL Raipur, SERPL Korba, SERPL Khunti and SERPL Jharsuguda NOTE 1. Please enable macros before filling the rates to see the quoted figures in words. 2. The bidder shall quote firm prices “Excess(+)/ At Par/ Less(-)” against the rates mentioned in the price schedule provided in BoQ1 sheet as per instructions provided herein after taking into account all the tender terms and conditions and scope of work. In case rates are quoted to more than 2 decimal places then, the amount quoted towards the tender shall be worked out for the rates quoted to first 2 decimal points without rounding off. 3. Only "Bidder Name", "Excess (+) or "At Par" or Less (-)" & "Percentage" are to be filled by the bidder in the designated "Sky Blue cells". For "At Par" selection, the percentage quoted shall be treated as 0.00 and quoted amount at par with estimate. 4. "Excess (+)" or "At Par" or "Less (-)" can be selected from the dropdown menu by clicking on the cell. 5. No changes shall be made by the bidder to S.No., Unit, Quantity. 6. In case of any difference in item description/ unit/ quantity in BOQ, then the item description/ unit/ quantity given in the tender document shall prevail. 7.The rates quoted by the tenderer shall include all cost towards equipment, labour & laboratory back-up, logistics, transport, spares, tools, tackles, consumables, etc., travel and stay arrangements and other incidentals including supply of materials as may be necessary for rendering the services as per detailed specifications. 8. Goods and Services tax as per GST Act 2017 for concerned services has been added to the base price of below mentioned services. If the bidder wishes to quote some other Goods and Services tax rate other than mentioned in the price schedule provided in BoQ1 sheet, they may quote the same in "Annexure 8". Statutory variation on Goods and Services Tax as applicable for the category/ service shall be to Owner’s account up to the contractual completion period. Reverse charges mechanism on Goods and Services tax amount shall be applicable as per Govt. rules. 9. Bidders are advised strictly not to alter or change the BOQ format/ contents. Bidders are also advised not to paste any image file or put any additional conditions in the BOQ work sheet. Abbreviations of Units: EA - Each, M - Meter, M2 - Square Meter, SQM - Square Meter, M3 - Cubic Meter, CUM - Cubic Meter, MT - Metric Tonne, FT2 - Square Foot, BAG - Bag, KG - Kilogram, QN - Quintal, TO - Tonne, L - Liter, KW - Kilo Watt, YR - Year, DAY - Days, CM - Centimeter