Cables Tenders

Details: Description :supply And Retro Fitment Installation Of Integrated Premium Executive Curve Linear Work Station With Inbuilt Facility Fo r Office Data Processing Peripheral Units Having Following Specifications: Overall Dimensions Of 2550 Mm Length X 900 Mm Width X 900 Mm Height. The Size Of Side Rack Shall Be 900 Mm X 500 Mm. Made Of 18 Mm Solid -zero Wood Nfc Board With 1 Mm Veneer, 2 Inch Polished Solid Wood Frame Structure. 1 Mm Acrylic Veneer Laminate With Thermo- Compressed Edge Band. Separate Slots For printer Ups, Cpu With Designated Electrical Points And Concealed Cabling.3 Tier Filing Cabinets, With Collapsible Snacks Tray And Cup holder. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Description: CATEGORY: 2 core - 0.50 sqmm CANFD Bus cable , Braided Sleeve- 12mm

Description: Pl No 98051301] Scrap Cond./released/unserviceable Communicable/ Non Communicable Opticle Fibre Cable Such As Single Mode, Multi Mode , Plastic Opticle Fibre Cable On As Is Where Is Condition Available Under The Custody Of Cdms 08 Ward Ap. (loc: Bin No. 1112 At Old Scrap Yard

Description: Cond Power Traction Convertor (gto Based) Of Electric Locomotive. Analysis - (a) Details Of Traction Convertor Frame 1.steel Frame = 284 Kgs 2. Cable With Insulation Bucnh (19 Nos - 90% Copper) = 54 Kgs 3.copper Bus Bar = 47 Kgs 4. Ct 04 Nos 2000 Amp Copper =01 Kgs 5. Alluminium Cover= 40 Kgs (b) Dc To Dc Link 1. Capacitor 14 Nos Alluminum =140 Kgs 2. Copper Shunt With Insulation = 17.1 Kgs 3. Steel Frame + Dc Link = 105 Kgs (c) Resonant Circuit 1. Steel Frame =60 Kgs 2. Copper Bar = 18.7 Kgs 3. Capacitor 08 Nos Alluminium = 80 Kgs 4. Shunt 16 Nos =1.8 Kgs (d) Valve Set Zvzv 1. Copper (03 Nos Valve Set) = 96.6 Kgs 2. Alluminium (03 Nos Valve Set) = 131.1 Kgs 3. Steel + Coil Ring (03 Nos Valve Set) = 131.1 Kgs (e) Valve Set Zvmv1. Copper 20.5 Kgs 2. Allluminium=45 Kgs 3. Steel + Coil Ring = 41 Kgs , Total Weight In One Piece = Approx 2950 Kgs, Out Of Which 1313.90 Kgs Content Details Are Given Above And Fitted With 22 Condensor With Insulation And Other Liquid Material (01 Condensor Approx Weight = 1636 Kgs Approx ) 08 Nos Tpc= Approx 23600 Kgs Note- Loading By Purchaser, Cutting Not Allowed.

Description: 700hp Demu Dpc-vijayawada-plno-98112326-(hsn -86079100). Cond And U/s Over Aged 700hp Demu Dpc No:15016, 15019, 15030, Of Dls/bza. These Three Demu Dpc Consisting Of Engine Block Complete, Ventilation Fan With Motor, Radiator Fan With Motor, Radiator With Expansion Tank, Hydraulic Pump, Hydraulic Oil Tank & Oil Cooler, Fuel Tank, Muffler Tank With Exhaust Bellows, Engine Block Bed , Turbo Super Chaser,, Air Brake System Valves(a9, Sa9, C2, C3w & Feed Valve),a9, Sa9, C2, C3w Feed Valves. Main Reservoirs, Auxiliary Reservoirs, Wiper Motor & Arm Assembly With Operating Knob,, Air Compressor Trc 1000b, Parking Brake Magnetic Valves, Horn Flutes With Operating Valves, Modified Abd Valves, Angle Cut Out Cocks, Mr Safety Valves, Dead Man Relay Valves, Traction Alternator, Traction Motors With Nose Caps, Main Rectifier Assembly, 100v Auxiliary Alternator-18.5kw, Rra, Master Controller , Bl Box,, 100v Gp Relays, Electro Pneumatic Contractors, Em Contractors, 2 Motors Reversers, Speed Sensor & Indicator Assembly, Engine Starting &control Panel, Head Light Unit, Flasher Light Unit, Dc-dc Converter, 8v 450ah Lead Acid Batteries, 6v Batteries. Truck Assembly, Axle Box With Bearings, Schaku Coupler Assembly, , Brake Cylinders, Wear Pieces, Gear Case Assemblies, 24b/charger Alternator, 24v Self Starter, Cable, Control Wiring Lumpsum, Actuator, Fsd, Driver Cab Fan, Brass Bearings, Centre Pivot Pin Brass Bush, Etc. The Above 3 Demu Dpc Of All Items ( Except Rc Items) Contains- Ferrous-140650.97 Kg, Copper-8055.51kg, , Brass-1232.20kg, Aluminium-2225.2kg, , Stainless Steel-2850.00kg, Wood-1500kg. Total Qty-156.514 Mt. ( Except Rc Items). Note- In T 700hp Demu Dpc No:15016- Connecting Rod With Pistion-12nos, Fiy-wheel-01 Nos, After Cooler Housing -01 Nos, Tappet Covers-04, 100v Gp Relays-05nos, Cattle Guard-01nos. Are Not Available. In 700 Hp Demu Dpc No:15019- Buffers-04 Nos, Cattle Guard -01nos Are Not Available. In 700 Demu Dpc No; 15030- Buffer Complete -02 Nos Are Not Available The 03 Dpc Are Available At Rayanapadu Work Men Spl Sinding. Delivery On Lot Basis. Ds-8 .no: 236200004/05/06. Dt.11.06.2025.note-1. Rc Items Should Be Handing Over By The Purchaser Before Effecting The Delivery.2) While Cutting Processes Purchaser Has To Stock The Similar Type Of Material In The Separate Places In Separate Heap. Purchasers Shall Visit The Lot For Physical Inspection Of The Material And Site Before Bidding In E-auction. Note- Cutting Is Permitted For Dismantling/loading Purpose. Note: Rc Items-1) Wheel Sets With Bull Gear-12nos . 2)8v 450ah Lead Acid Batteries-9 Nos. 3) Batteries-46nos( 6 V Batteries-36 Nos, 10v Batteries-10 Nos) 4) Centre Pivot Pin Brass Bush-04nos

Description: CATEGORY: PVC Copper Cable Single Core and Multi Core Circular Sheathed Cord with Flexible Conductor (V2) as per IS 694 (Q2)

Description: CATEGORY: CONNECTING ROD PISTON AND RING ENG ASSY , GASKET SET COMPLETE ENGINE , VALVE STEM SEAL , CLUTCH CABLE ASSY , CARBURETOR FLANGE WASHER , SPARK PLUG MICO , CYLINDER PISTON ASSY , VALVE EXHAUST , VALVE INLET , PISTON RING SET , CHAIN AND SPROCKET KIT

Description: CATEGORY: Fine filter of size 600mm into 600mm into 150mm , Pnumatic Solenoid valve 100 NB with Air Pipe Make Rotex or Trident and Aira , AC induction tubular heater 9 KW 415 Volts 3 Phase of length 1 point 5 m with MS powder coated terminal cover as per sample Make As per sample , AC heating elements 6 KW 415 Volts 3 Phase of length 610 mm complete fitting as per existing location all as specified Make Telelec or Escorts and Theeta , Contactor LC1F4004 Make Schinder , Contactor LC1F3304 Make Schinder , Circuit breaker 280 oblique 400 A 4 Pole CVS 400 F Make Schinder , Circuit breaker 112 oblique 160 A 4 Pole CVS 160 B Make Schinder , Cooper wire 2 Point 5 Sqmm 3 core , MCCB 160A 3 Pole 25 KA Make L and T or Seimens and Legrand , Shrounded copper conductor busbar 160 Amp W type with PVC sleeves R DSL Single Bar , Shrounded copper conductor busbar 200 Amp W type with PVC sleevesY DSL Single Bar , Shrounded copper conductor busbar 200 Amp W type with PVC sleevesB DSL Single Bar , Shrounded copper conductor busbar 200 Amp W type with PVC sleeves E DSL Single Bar , Cooper wire 4 Sqmm 3 core Make KEI and Havells , Lift Cabin cross flow 45W 220 V 50 Hz , XLPE UG cable 16 Sqmm 4 core Make KEI or Polycab and Plazza , XLPE UG cable 95 Sqmm 4 core Make KEI or Polycab and Plazza , PVC insulated flexible flat copper conductor of size 0 point 5 Sqmm 24 core , Cabin Fan 300 mm Sweep Make Bajaj or Havells and CG , Automative battery 12V 12 AH Make Exide and Amron , Automative battery 12V 18 AH Make Exide and Amron , Exhaust fan 300 mm Sweep Make CG or Khaitan and Bajaj , XLPE UG cable 70 Sqmm 4 core Make KEI or Polycab and Kaliga Premium , Phase sequence corrector 15 HP capacity with double contractor system Make Volina or Univercell and Marco , LED Bulk Head Light fitting 10 watts Make Havells or Phillips and Wipro , Single phase 2HP Sewage dewatering pump Make Kirloskar oblique crompton , Line Interactive UPS with AVR (V2) (Q2) , Molded Case Circuit Breakers (MCCB) as per IS / IEC 60947 (Q3)

Description: CATEGORY: M and L for shifting of 250 KVA DG set , M and L earthing complete as per electrical plate No 3 , DG Set foundation , Disconnecting of fuel tank , Supply Laying Jointing testing and commissioning LT under ground cable , Excavation in trenches , Returning filling in including spreading , Removing of excavated material , M and L Sand cushioning to PVC under , Supply and fixing galvanized steel tubing light , M and L Bricks for protection , M and L for boring of existing road

Description: CATEGORY: Wood screws (Q3) , wire nails (Q4) , XLPE Cable for Working Voltages up to and Including 1.1 KV as per IS 7098 (Part 1) (Q2) , PVC Flat Cable, Aluminium Conductor with PVC Insulation and Sheath as per IS 694 (Q3) , Compression cable lugs (Q3) , Electrical connection Lugs or thimbles (Q3) , LED Batten with Battery / Invertor (Q3) , Wooden Beading Patti (Q4) , Door Handles as per IS 208 (Q4) , Rigid Plain Conduits of Insulating Materials as per IS 9537 (Part 3) (Q3) , Pipe Clamps (V2) (Q4)