Cables Tenders

Description: Allocation No.21213304.on As Is Where Is Basis. Iron And Steel Cut-up Parts Of Condemned Memu Tr. Coach Body Bearing Nos.[1]er/22088/asn, Type.-c. [2] Er/22089/asn, Type.-c. [3] Er/410018/asn, Type.-c. Total Qty-03 Nos. To Be Sold Along With 02 Nos. Of Condemned Bogie [per Coach] But Without Excluded Fittings. Excluded Fittings Are 04 Nos. Of Wheel Sets (per Coach) With Its Fittings & Non-ferrous Attachment If Any Are Excluded From Sale And Will Be Returned To The Custodians As Per Extent Procedure. Approx Saleable Weights Of Condemned Memu Tr. Coaches Are Included With The Un-serviceable Items, Ferrous-iron, N- Ferrous/ Other¿s Items .i.e. Un-serviceable Aluminium Window Guide Frame- (22nos In 140.4 Kg Approx For Coach Sl-1, 15nos. In 93.6 Kg. Approx For Sl-2 & 21nos. In 131.04 Kg. Approx For Sl-3). Aluminium-(approx. 0.1kg. For Each Coaches), Bronze-(approx. 0.6kg. For Each Coaches), Copper Cable-(approx. 62.59kg. For Each Coaches), Rubber-(approx. 259.376 Kg. For Each Coaches), S.s.trough Floor-(approx. 960 Kg. For Each Coaches), Fibre & Glass-(approx. 470.24 Kg. For Coach Sl-1, 520.72kg For Sl-2 & 480.4kg For Sl-3), Wood-(approx. 1551.3kg For Each Coaches) & Rexin And Foam-(approx706.56 Kg For Each Coaches) Etc. Which Are Unserviceable And Non-returnable. Location- Lying At Carriage Complex/kpa. After Sale, Coaches Will Be Handed Over To Purchaser For Dismantling And Cutting At C And W Extension Yard/kpa. Cutting And Dismantling Of Coaches Is To Be Made At C And W Extension Yard/kpa By Purchasers Own Arrangement After Ensuring Sufficient Safety Measures Against Fire Hazards. Returnable Items Of Sold Coaches Are To Be Returned To The Custodian Before Delivery.

Description: CATEGORY: Roof sheet and Wall Cladding 0 point 60 mm thick , Mild steel iron in tubular sectin incl fabrication and one shop coat , Angle flat iron , Nut and bolt , Earthing , Lightening Arrester , Ordinary Portland Cement grade 43 , Coarse sand sand shall be clean sharp , Stone aggregate shall be crushed stone 20mm , Stone aggregate shall be crushed stone 40mm , Roof sheet 0 point 60 mm Pre painted Galvanised steel sheet , Hollow Steel iron , Anlge Iron , Nut and bolt incl 2mm thick 02 Nos washer per set , Collapsible Steel gate , Fire extinguisher 1 Kg , Plastic dividing strip 3 mm thick , Electric Items , Cement base paint , Coarse Sand , Stone aggregate shall be crushed stone 10mm , Vega multi lens polycarbonate safety goggles , Hand Gloves rubber , Steel Iron cutting circular saw of dia 12 inch and thickness 2mm , Mild steel welding Rods , 16 Sqmm three core copper cable , 24 watt LED tube rod , Bulk head housing with LED bulb , LED bulb 9 Watt , Angle batten Lamp holder , Switch piano flush type 5 Amp , Casing capping double locked box , Gang Box 3 switches 5 Amps , Screw full threaded 1 by 2 inch , PVC single core 1 point 5 Sqmm FRLS type stranded copper wire , PVC single core 2 point 5 Sqmm FRLS type stranded copper wire , MCB 6 Amp SP 240 Volts , MCB 16 Amp SP 240 Volts , Isolator 40 Amp DP , Insulation tape 25mm width of 9 mtr long , Roof sheet 0 point 60 mm thick PPGI , Ordinary Portland Cement grade 43 IS-8112 , Coarse sand , Stone aggregate shall be crushed stone 20mm graded , Stone aggregate shall be crushed stone 40mm graded

Description: CATEGORY: Dispensary storage racks , Reception counter , Chairs , Portable washroom with fittings , Generator Shed , 63 KVA Generator , Cable and wiring with elect fittings , TVs 65 inch , TVs 55 inch , Tata Sky , Water Supply Pump , Water syntax 5000 Liter , Water syntax 2000 Liter , Geysers 01 each for Ward, Toilet and Kitchen , Elect water dispensers , Kero Heaters , Computer i5 8th Gen 8 GB RAM 1TB HDD 20 inch display with mouse and Keyboard , Wheel Chairs , Blankets Quilts , Patient Round Chair , Tables 4ftx2ft , Revolving Office Chairs for staff , Steel Benches 3 Seater , Plastic chairs waiting room , Information Medical Boards , Hamam 500 Liter , Digital Boards 15ft x 2ft , Sign Boards , Distemper and maintenance , Nebuliser Machine , BP Machine Digital , BP Machine Manual , Pulse Oxymeter , Suturing Tray Kit , Needle Destroyer , Weighing Machines , Ht measurement Instrument , Oxygen Cylinder 1000 Liter , Oxygen Cylinder 400 Liter , Refillable Portable Oxygen Cylinder 10 Liter , Foldable Stretchers , Thermometer Digital , Electric Blankets Single Bed , Multipara Monitor , Automated External Defibrillator , High Low patient bed , Auto Clave Sterilizer , BMW Dustbin Set of 3 , Wet and Dry Dustbins , Crash Cart Trolley , Patient Trolley , Guedel Airway , Intubating Video Laryngoscope , Endo Tracheal Tube No 06 , Endo Tracheal Tube No 07 , Catheter Tray , Eye Test Drum Near Vision , Eye Test Drum Distant Vision , Minor OT Light , Spinal Upper Limb , Cervical Collars Sp , Oxygen Concentrator , Masks , Surgical Gloves , ECG Machines , Glucometer , HB Meter , HB testing strips , Torch , Examine Table , Stethoscope , Fluid Warmer , HAPO Bag , Suction Apparatus , Sheet Water Proof , Tourniquet , Thomas Knee splint , Intercostal Drainage Tube , Infusion Warming Sys , Pressure Infusion Bags , Vein Finding Devices , Refraction Unit , Infusion Pump , Laryngeal Mask Airways

Details: - Bid Document for Providing Improved Assess To Water Through HouseHold Connection in Existing Water Supply Scheme Jamalpur (MH) Block Bhikhiwind Distt. Tarn Taran. Under JJM/Nabard-XXVI (Part of Surface Water Project Bhuchar Kalan). Description of work:- " Providing & Installing of Chlorinator, supply & fixing of sub. cable distribution pipe line, All civil works, supplying and laying PVC pipes, sluice vales and special distribution system etc. House hold connection , Development of water works, Auto matic control device etc. including cost of carriage of material, complete in all respects."

Details: Description:- Supply Of Electric Point Machine Irs Type, Nontrailable Type, 143 Mm. Throw, Rated voltage 110v Dc With Internal Locking Complete. The Point Machine Shall Be Rotary Locking Type And shall Have A Min. Ac Immunity Level Of 160 V (r.m.s), 50 Hz With Interlocking Complete With Lock, detector, Cable Terminal Box And Slide For Lock And Detector As Per Rdso Spec. No. Irs: S 24-2002, & motor S 37-2022 Version 2.0, Rdso-s/10800 Or Latest With Latest Amendments If Any. (inspection: rdso)

Details: Description:- Design, Manufacture And Supply Of Hot Standby Architecture Electronic Interlocking (ei) System - Centralized As Per Requirement Of Zonal Railway, Complete As Per Rdso Specification And as Per Attached Technical Requirement & Tentative Approved Signalling Plans & Diagrams. This Include central Processing Equipment , Interface Equipment, All Interfacing Relays Suitable For Ei, In-built event Logger, Interconnecting Cables And Jumper Wires, Required Power Supply Converters For Ei equipments, Housing For Ei Equipments & Relay Racks , Fuses , Screw Less Disconnecting Type Terminals, fixture Mounting Arrangements, Industrial Grade Maintenance Terminals (32'' Led Or Higher Size With ups Minimum 1 Hr Back Up With Printer) And Other Necessary Accessories To Make The Ei System functional As Per Approved Signalling Plan. All Items Shall Be Supplied As Per, Per Functional Bit/station for Functioning Of Ei. Negative Variation In Functional Bit Not Permitted And For Positive Variation Card wise/modules Etc. Breakup Should Furnish By Tenderer. Technical Requirement: 1. No Of Bits Each station. 2. Architecture-minimum 2 Out Of 2 3. Non Vital I/o- Can Be Used Only For Accessories Where sil-4conditionrequired.4.rdso/spn/192/2019ver.2.0withlatestamendment. Supplyof10% essentialspares Of The Ei Equipments Subject To Minimum One Of Each Type Mainly Consisting Of processor, Cards/ Module, Interface Relay, Dc-dc Convertors, Moxa Switch, Ofc Connectors, Etc. Item wise Detailed Break Up With Unit And Quantity To Be Provided In Separate Annexure. (the Quantity involves 10% Spare). Note : Rate Does Not Include Cost Of Vdus And Embedded Pc . Dual Operator industrial Grade Vdu Panel And Embedded Pc Will Be Taken Separately.

Details: Description:- Launching Of Precast Rcc Box Segments For Rubs/limited Height Subways (lhs) Of any Size And Barrel Length For Single/double Line As Per Approved Drawings To The Correct Alignment and Position In Electrified /non-electrified Sections Safeguarding All Utilities (s&t Cable, Power Cable, ohe, Pipelines Etc.) Including Transportation Of Box Segments From Casting Yard To Site Of Launching, dismantling Of The Existing Track, Removing & Stacking Of Ballast, Cutting Of Formation And Approach road Below Or Above Bed Level, Placing Of Base Slabs & Box Segments In Position, Backfilling After launching Of Precast Box Segment, Ballasting & Re-laying Of Track To Correct Alignment And Geometry, packing And Further Maintenance Till Allowing Non-stop 20 Kmph Over The Re-laid Track, Complete In All respect To The Satisfaction Of Engineer-in-charge. The Rate Is All Inclusive Except The Cost Of Rcc Box segments, Base Slabs And Backfill Material Which Shall Either Be Supplied By Railway Or Paid Extra under Relevant Item. Note: Minimum Equipment Required During Block Shall Be (i) Crawler Mounted hydraulic Excavator Of Min 200 Hp And Bucket Capacity 2.5 Cum - 3 Numbers And (ii) 3 Cranes Of adequate Boom Length Suitable For Launching Box Segments In Position (min Capacity Of Each Crane - 200 Mt For Single Line And 300 Mt For Double Line) Apart From Other Equipments, Tools, Plants And machinery Required To Complete The Job Within The Allowed Block Period.

Details: Description:- Wiring For Light Point/fan Point/exhaust Fan Point/call Bell Point With 1.5 Sq.mm Frls pvcinsulatedcopperconductorsinglecorecableand1.5sq.mmfrlspvcinsulatedcopper conductor Single Core Cable As Earth Wire In Surface/recessed Steel, With Modular Switch, Modular plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.mm Frls Pvc Insulated Copper Conductor single Core Etc. As Required Of Reputed Make Complete Conforming To Cpwd General Specifications For electrical Works Part-i Internal - 2023, Cpwd Dsr (e&m) 2022 Item No. 1.10.1. Group A

Details: COMPLETE PANEL - A, PANEL - C ( WITHOUT DRIVER DISPLAY UNIT ) & PANEL- D ALONG WITH ALL EQUIPMENTS , HARDWARES, WIRING /CABLING FOR WAG-9. NOTE- PANEL - C WILL BE SUPP LIED WITH COMPLETE ASSEMBLY MOUNTING ON ITS PLATE Spec:CLW/ES/3/0239/D, 0240/B,0241/B ,04 53/F . BLW letter no.BLW/D&D/WAP-7/EM/Cubicle dated 03.05.2023 and 28.03.2024. and RDSO MS no. RDSO/2023/EL/MS/0495 (Rev.0) [ Warranty Period: 30 Months after the date of delivery ] ]

Details: Description:- Installationandcommissioningofssdaccompleteasperrdsospecification rdso/spn/177/2012(ver3) Or Latest The Axle Counter Will Be Ssdac Section Type With 2 Or More detection Point And It Is Possible To Install Without Trolley Protection Track Circuit. Installation To Be done By Oem Authorised Engineer As Per The Installation Manual Of The Oem. This Include Supply And installation Of Hdpe Pipe, Gi Pipe, Shielded Cable/wires Masonry & Wood Work In Location Box, Relay room, Asm Room It Also Include Of Fixing Of Resetting Box In Asm Office With All Wooden And Masonry work. Work To Be Done As Per Tan Sts/e/tan/7010 Or Latest. Inspection: Consignee