Cabinet Tenders

Details: Installation of 2 nos. of 3 phase 4 W ABT /110 V/ √3,-1A, 0.2s class along with metering cabinet at receiving (TSAT Campus) and sening (132 KV Baghjap GSS) end 132 KV CT & PT and other required materials at TATA Semiconductor Assembly and Test Pvt. Ltd., Jagiroad, Morigaon under Jagiroad Electrical Sub-Division of Morigaon Electrical Circle on full “Turnkey” mode

Details: Specified BOQ for probable items with approximate quantities for Renovation and Repairing work for Flat No. F/6 at RHE, 32 Ballygunge Circular Road , kolkata by renewing plaster, structural repair, replacement of wall and floor tiles of common bath including S and P fittings, painting of walls and door windows after surface preparation, modification of storage cabinet in kitchen, replacing damaged floor tiles and other necessary allied works. Project ID HO242528110S000

Details: Description :feeder Selection Rotary Switch (s02) With Marking " I-0-ii " Net 1 - Local Main Supply - Net 2 (change Over Switch With 0- Positi on 3 Pole) Along With Auxiliary Contact(2no+2nc) Rated Voltage 690 V Ac, Rated Current 16 Amps As Per Siemens Model.no. 3sb5000-2db 01+3sb5400-0a, L&t Model.no.emncsl1+ecic Schneider Model No.k2f022qch Suitable For Switch Board Cabinet As Per Rdso Spec. No. R dso/pe/spec/ac/0184-2015 (rev.1) Or Latest Makes:sl.no.7 Of Page 25 Of Bill Of Material For Switch Board Cabinet Or Tecknic Make Is Suitable as Per Sl No.7 Of Bom Materials (latest) For Mssbc Of Lhb Ac Coaches Rdso/pe/spec/ac/0192-2018(rev-1) [ Warranty Period: 30 Months after The Date Of Delivery ] ]

Details: Description :feeder Selection Rotary Switch (s02) With Marking " I-0-ii " Net 1 - Local Main Supply - Net 2 (change Over Switch With 0- Positi on 3 Pole) Along With Auxiliary Contact(2no+2nc) Rated Voltage 690 V Ac, Rated Current 16 Amps As Per Siemens Model.no. 3sb5000-2db 01+3sb5400-0a, L&t Model.no.emncsl1+ecic Schneider Model No.k2f022qch Suitable For Switch Board Cabinet As Per Rdso Spec. No. R dso/pe/spec/ac/0184-2015 (rev.1) Or Latest Makes:sl.no.7 Of Page 25 Of Bill Of Material For Switch Board Cabinet Or Tecknic Make Is Suitable as Per Sl No.7 Of Bom Materials (latest) For Mssbc Of Lhb Ac Coaches Rdso/pe/spec/ac/0192-2018(rev-1) [ Warranty Period: 30 Months after The Date Of Delivery ] ]

Details: Description :feeder Selection Rotary Switch (s02) With Marking " I-0-ii " Net 1 - Local Main Supply - Net 2 (change Over Switch With 0- Positi on 3 Pole) Along With Auxiliary Contact(2no+2nc) Rated Voltage 690 V Ac, Rated Current 16 Amps As Per Siemens Model.no. 3sb5000-2db 01+3sb5400-0a, L&t Model.no.emncsl1+ecic Schneider Model No.k2f022qch Suitable For Switch Board Cabinet As Per Rdso Spec. No. R dso/pe/spec/ac/0184-2015 (rev.1) Or Latest Makes:sl.no.7 Of Page 25 Of Bill Of Material For Switch Board Cabinet Or Tecknic Make Is Suitable as Per Sl No.7 Of Bom Materials (latest) For Mssbc Of Lhb Ac Coaches Rdso/pe/spec/ac/0192-2018(rev-1) [ Warranty Period: 30 Months after The Date Of Delivery ] ]

Details: Procurement of 4 -in-1 Polycarbonate Meter Boxes (Cabinets) for incorporating Single Phase Energy Meters

Details: Description:- Itemdescription Supply, Installation, Testing And Commissioning Of Complete Ran systemforonesitewithnecessarysoftware. I.2sectorenodebwithbbu,rrh,antennaand associatedaccessoriesincludingcables. Ii.smpsbasedpowerplant-48v,withn+1rectifier redundancy Including Battery Bank (li-ion)@ 48v (max. Subject To Optimum Utilization Of Existing assets). Iii. Outdoor Cabinet For Telecom Installation Of All Equipment Near Tower Like Bbu, Csr, Power supply, Alarm Control Unit Etc. (max. Subject To Optimum Utilization Of Existing Assets).

Details: CATEGORY: View box , Wheel chair , IV stand , Instrument Trolley , Rack standard size , Crash Cart , Instrument cabinet , Examination couch , Doctors chair , Doctors Table , Patient Stool , Consultants chair , Consultants Table , Patient Chair , Registrar Table , Staff Table , Staff chair , 3 seater steel chair , Reception table , Dressing Trolley , Curtain Track with curtain , Foot step 2 step , Dust Bin Set colour coded with trolley , Dust Bin Set , Foot step dustbin

Details: BOQ ITEMS: Providing & Placing in position wooden TV wall panel of size approx 1740mm x 2440mm ht x 50mm thick as per approved design fixing 50mm x 25mm hollock wood batten on inside as frame of the panel, panel base shall be made up of 19mm thick commercial ply of make Duro Green or equivalent and fifixing 18mm thick hdhmr ply of make Action Tesa or equivalent on on outer exposed surface of the panel providing fluiting design on the exposed panel with the help of 25 x 10mm teak wood bidding, finally finishing exposed panel area with the help of high quality high gloss polish of make Sirca or equivalent the cost including all necessary nails screws fevicol etc all complete as per the direction of engineer in charge, Providing & Placing in position wooden TV wall panel of size approx 2400mm x 2440mm ht x 45mm thick as per approved design fixing 50mm x 25mm hollock wood batten on inside as frame of the panel panel base shall be made up of 19mm thick commercial ply of make Duro Green or equivalent and fifixing 18mm thick hdhmr ply of make Action Tesa or equivalent on on outer exposed surface of the panel providing fluiting design on the half exposed panel with the help of 25x10mm teak wood bidding and othe half portion shall be consisting of 1mm thick laminate as per approved shade, finally finishing exposed panel area with the help of high quality high gloss polish of make Sirca or equivalent, the cost including all necessary nails, screws, fevicol etc. all complete as per the direction of engineer in charge., Providing & Placing of wooden wall panelling with fluiting design having 2 nos. door shutter, panelling of size approx 4460x3100mm ht, , Providing & Placing in position wooden TV wall panel of size approx 2345x2345mm, having bottom cabinet of size approx 2045x375x260mm ht. and open shelve cabinet of size approx 380x415x2345mm ht, , Providing & Placing in position wooden vanity counter of size approx 1520x540x580mm ht as per approved design and drawing, the vanity top, bottom, sides, shelve, middle partition, drawer head shall be made up of 19mm thick commercial ply of make Duro/Green or equivalent,, Providing & Placing in position wall hung wooden cabinet of size approx 2400x360x270mm ht, as per approved design, the cabinet top, bottom, side, shelve, middle partition, drawer head, unit back shall be made up of 18mm thick hdhmr ply of make Action Tesa or equivalent, , Providing & Placing in position wooden vanity counter of size approx 1535x665x870mm ht, as per approved design, the vanity top, bottom, side, front fix, drawer head, partition, shelve, upper box unit shall be made up of 18mm thick hdhmr ply of make Action Tesa, Providing & Placing in position wooden vanity counter of size approx 2240x550x710 mm ht,, Providing & Placing in position wooden vanity counter of size approx 820x600x560mm ht, as per approved design, Providing & Placing in position wooden vanity cabinet of size approx 1525x610x580mm ht. as per approved design, the cabinet top, bottom, Providing & Placing in position wooden vanity counter of size approx 2470x610x640mm ht, as per approved design, the cabinet top, bottom, side, partition, shutter, drawer head,, Providing & Placing in position wooden tv unit of size approx 3400mm x 540mm x 2360mm ht, as per approved design, the tv unit shall be having 2 nos wardrob with shutter on both side and cabinet with shutter on bottom, Providing & Placing in position wooden side table of size approx 460mm x 400mm x 530mm ht, as per approved design, the table top, bottom, side, drawer head, skirting shall be made up of 18mm thick hdhmr ply of Action/Tesa or equivalent make, Providing & Placing in position wooden side table of size approx 540mm x 460mm x 540mm ht, as per approved design, the table top, bottom, side, drawer head, skirting shall be made up of 18mm, Providing & Placing in position ornamental design wooden paper rack of required size and shape 370mm x 120mm x 790mm ht., Providing & Placing in position ornamental design wooden paper rack of required size and shape 170mm x 60mm x 150mm ht., Providing & Placing in position ornamental design wooden paper rack of required size and shape 250mm x 150mm x 250mm ht., Providing & Placing in position ornamental design wooden temple of size approx 2500x2380mm as per approved design, firstly fixing 50x25x3mm aluminium framing , Providing & Placing in position wooden temple cabinet of size approx 2480x360x790mm ht, as per approved design, the cabinet top, bottom, side, shutter, partition, skirting shall be made up of 19mm, Providing & Placing in position ornametal design wooden TV console of size approx 1570x400x750mm ht. , Providing & Placing in position L shape shelves f size approx (2030mmx440mm) & (785mmx440mm)

Details: Procurement of 1 in 1 -in-1 Polycarbonate Meter Boxes (Cabinets) for incorporating Three Phase Energy Meters