Cabinet Tenders

Description: CATEGORY: OVERSIZED SOFAS 3S , SOFA 2S , ARMCHAIR , SIDE TABLE , CENTRE TABLE , TELEVISION CABINET , MEDIA CONSOLE CABINET , ACRYLIC INFORMATION BOARD , WINDOW BLIND , RACK , MIRROR , LED ACRYLIC 3D BOARD , WALL MOUNTED FAN , HIGH RPM AIR VENTILATION DEVICE , VISITORS CHAIR , COMPUTER TABLE WITH CHAIRS , EXECUTIVE CHAIR , OFFICE TABLE WITH TOP , STAINLESS STEEL CHAIRS 3S , INFORMATION LED DISPLAY , CURTAINS , KEY BOX , ACCESSORIES , ALMIRAH , WORK STATION , OVERHEAD STOREAGE CABINET , OFFICE CHAIR , L SHAPE EXECUTIVE TABLE , EXECUTIVE TABLE

Description: Scrap Ms S&t Released Of Sort And Sizes Including, Junction Box, Stop Signal, Shunt Signal With Offset, Gate Pedestal, Point Machine , Signal Pol, Signal Ladder, Unit To Aspect, Route Drum, Rodding Set, Location Box, Signal Base, Shunt Signal, Route Drum, Impedance Bond Cover, Protection Cover, Half Location Frame, Signal Post, Plunger, Ladder Assay, Offset Bracket, Point Machine Without Motor, Ground Connection/point Rodding, Ms Battery Box, Gate Meeting Post, Gate Pedestal, Gate Gear Box, Empty Cabinet, Strips, Plates, Rods, Transmission Assemble, Levers, Pipes, Ladder, Fabrication Angle Channels, Signalling Electrical Substation Machinery Parts Fittings, Nut Bolts, Signalling Poles, Point Motor, Relay And All Kind Of Signalling Items And Other Misc Ms, Gi And Ci Fittings With Or Without Minor N/f And Other Attachments. Note- Cutting Allowed Only For Location Boxes For Easy Loading At The Time Of Delivery. Location: D By 1.

Description: Scrap/condemned Ms Mixed Items Released From Diesel Loco Shed Kalyan Consisting Of Corroded And Rusty M.s. Angle And Patra, Door, Locks Compressor Components Like Valve Liner, Head, Pipeline, Shell, Loco Hood/cover Sheets, Tsc Components, Housing, Pump And Blower Components Housing Shaft Bearing Power Pack Block Components, Cylinder Head, Power Assembly Components Like Liner Main Bearing Piston Carrier, Head And Its Component, Basket, Grids, Pinion, Blower, Air Bellow Spring, Con Rod Bearing Shell Con Rod Bolt Piston Pin Heat Exchanger And Its Sub Components Like Steel Plates And Ferrous Components, Fuel Injection Components, Under Gear Components, Brake Rigging Items, Cylinder Liner, Fip Base, Cam Shaft, Connecting Rod, Cam Gear, Water Pump Gear, Hhp Main Bearing, Con Rod Bearing, Lower Liner Insert, Cam Shaft Bush Bearing, Alco Main Bearing, Alco Liner, Hhp Cam Shaft Gear And Accessory Gear, Knuckle, Screw Coupling, Buffer, Cbc Shank Without Device, Cranking Contactor, Flasher Light, Cab Light, Cab Fan, Epc, St, Sta Contactor, Resistance Panels, Hhp Piston, Hand Brake, Gear Case, Axel Box Components, Coupling, Sand Box, Cattle Guard, Fip Body,, Pull Rod, Inter Collar Body, Sand Gear Items, Broken Helical Springs, Bp/fp Angle Cock, Isolating Cock, Spring/part Of Air/brake System, Body Parts Of Mrsv, Ms Pipe Fitting, Pipe Cutting Pieces, A/cock Parts, Mu2b, F1 Selector 1/cock, F2 Feed Valve Parts, Operating Rod, Bearing Inner Racer, Arcing Stud, Magnet Valve, M S. Foundation, Filter Bory, Piston Ring, Dis Valve, Nut/bolt Fastener, And Other Miscellaneous Fixtures And Release Items, Small Springs, Rectifier Panel And Its Sheet Filter Housing Plate Wire Rope Cbc Coupling Components Trolley Chain Slings Cabinet Damaged Barrels Big And Small Drums Driver Seat, Tube, Channel, Shields Pulley Rods, Dampers. Remarks : - Lot Is Approachable By Pakka Road. The Delivery Of Ferrous Will Be Made On Actual Weighment Basis Only At The Nearest Govt Approved Weigh Bridge The Items Mentioned In The Description Only Will Be Elivered. Lot Number Is Exhibited/painted On The Lot. Lot Inspected On Visual Basis In Good Faith Since It Is Not Possible To See Each And Every Pieces Of Lot Material For Detailed Check During Inspection. No Egregation Of Material Is Allowed At The Time Of Delivery. Any Non Ferrous Items Found In The Lot At The Time Of Delivery Will Not Be Delivered And To Be Returned To The Stockholder.new Helical Coil Springs, Dampers. Rubber Sandwich Lying Near Stack Not In Lot And Care Should Be Taken That The Same Is Not Delivered. Barricading To Be Done.the Quantity Is Worked Out On Approximate Basis Dismantling & Cutting Is Allowed For Easy Loading Purpose At The Risk & Cost Of The Purchaser The Purchaser Should Ensure That During Dismantling & Cutting Operation No Nearby Structure/building Should Be Affected And Take Necessary Care/safety Precautions To Avoid Any Mishap As Well As Damage To Railway Property The Purchaser Will Be Fully Responsible If Any Accident/unusual Incident Occurs At Work Site/place During Cutting. The Purchaser Is Advised To See The Lot Site/content Before Bidding. No Claim Will Be Entertained After Sale Of Lot. Purchaser Should Arrange His Own Hydra For Loading. The Stockholder Is Fully Responsible For Any Addition, Deletion, Alteration And Variation In The Lot After Joint 1st Inspection Report. Lot Is Ok For Sale With Above Observations. Location :- Kalyan Diesel Loco Shed, Kalyan Stock Holder : - Sse (d) Admin / Kyn. Qty : - 33 Mts.

Description: CATEGORY: Work Station for Drone Repair Lab , Cabinet for Drone Repair Lab , LED Lights Orients for Drone Repair Lab , Electrical Boards fitted in Drone Repair Lab Cabinets , Locking System for Cabinets

Description: CATEGORY: Biosafety Cabinet (Q2) , Lyophilizer (Q3)

Description: Tender For Purchase Of Biosafety Cabinet 2025

Description: Periodical Services, Kitchen Cabinet And Joinery Repair Works In Map And Billets Areas At Af-i Under Ge (af) Jamnagar No.2

Description: Supply Of Relay Testing Jig With The Following Hardware Requirement Are Required To Be Adhered To For The Relay Test Equipment - Test Equipment For Qn1 & Qna1 Series Of Relays Covering 12f4b, 8f8b, 8f4b, 6f6b, 4f4b Relay Types. Microcontroller-based Relay Test Equipment With An Inbuilt Database That Would Store, Prepare & Print Test Results. The Requirement Also Specifies For A Hdmi Port And A Usb Communication Port. 1) The Test Equipment Should Be Microcontroller Based 2) Should Include Low Noise And High Accuracy/high Resolution A/d Converter 3) The Equipment Should Be Provided With A 7" Touch Screen Display For Frontend - Graphic User Interface (gui) And An Additional Liquid Crystal Display (lcd - 16 X 2) - To Displays The Relay Type Being Tested And The Progress Of Relay Testing Cycle 4) Should Be Equipped With A Hdmi Port For Connecting To An External Display 5) A Universal Serial Bus (usb) Based Communication Interface To Export Test Data To Ibm Pc Compatibles. 6) A Wireless Keyboard And Mouse 7) A Plug Board To Securely Place The Relay To Be Tested 8) Powder Coated Mild Steel Cabinet Inspection : Tpi (third Party Inspection)

Description: Motor Protection Circuit Breaker (mpcb) For Compressor Unit And heater Unit, Current Rating 7-10 Amp, Thermal Release Range 10-16 Amp, class-10, Breaking Capacity 10ka, 3-pole, Voltage Rating 415 V Ac, conforming To Is/iec 60947-2; Conforming To Rdso Spec. No. rdso/pe/spec/ac/0184-2015 (rev. 1); Suitable For Use In Switchboard cabinet Of Lhb Type Ac Coaches. Accepted Make & Cat. /model No.: Rdso- approved Make And Model As Per Serial No. 39 Of Rdso Letter No. el/7.1.108/mssbc Dated 17.09.2021 Or Any Other Rdso-approved Make

Description: Supply, Erection , Commissioning Of Sdh-stm-16 Communication Equipment With Cabinet Along With Optical Interface Cards,