Boards Tenders

Description: Cond.& U/s Ohe Scrap & U/s Ferrous/ms/gi Angle Channel, Cut Mast, Anchor Fitting Assembly, Pipe, Bend Pipe, Tube Rod/guy Rod Guy Rod Fitting, Back Angle, Drop Arm, Cut Mast Top/bottom Mast Fitting, Adjustor, Ending Cone, Mast Chair Fitting, Isolator Set, Double Pole Isolator, Isolator Handle, Opening Pipe, Adaptor, Number Plate, Tirfor, Single Pulley, Automatic Change Over Panel Box, Caution Board, Ohe Mast Scrap, Ohe Gi Scrap Such As Various Sizes Of Bolts, Nuts, Pipes, Plates, Hooks, With/without Rope Bracket, Arm Hook, Electrical Light Mast, Anti Falling Rod, Small Parts Steel, Stand U Clamp, Pulley Jig, Bolts, Bond, Rivets, Channels, Portal Booms, Washer Insulator Cap, Notice Board, Ms Flat, Suspension Clamp Nut, Clamp, Fob Scrap In Dismantled Condition (mast), Sleeve, Tube, Cantilever Tubes, Ball Eye Various Sizes Of Bolts Included With Cut Channels & Fittings, Cut Pieces, Isolator Iron Parts, Boom, Si Clamp And All Other Released Ohe Scrap/gi Scrap In Full/broken/cut/dismantled/damaged Condition Of All Nature, Sorts And Sizes In As Is Where Is Condition. Pl.no. 98030309. Custodian: Dms-rsf-gsd-per. Location: C Row Bin 14. Note: (1) If Any Non-ferrous Items Found During Delivery Should Be Handed Over To Custodian. (2) Cutting Is Permitted Only To Heavy Nature Items And In Lorry Loadable Sizes Only. (3) Loading By Crane Is Also Permitted.

Description: CATEGORY: EC6002B-D8301797 (TSR40/2 I/O BOARD) , EC6002B- D8302816A (ELECTRONIC CARD TVM932/N10)

Description: CATEGORY: Radar Speed Display Board (V2) (Q2)

Description: Providing Consultancy Services To Study And Designing The Power Distribution Scheme, Preparation Of Drawings For Extension Of Permanent Power Supply To The Proposed Ytps Township From Ytps Chp 11kv Boards, Arranging Of Street Lighting System And Providing Diesel Generator(dg) Sets For Extending Alternate Power Supply At Various Locations In Ytps Colony Township Including Residential And Non Residential Complexes And Preparation Of Detailed Estimate,tender Specification To Fix Up An Agency On Tendering Basis.vetting Of Vendor Drawings/documents During The Execution Of The Subject Work At Ytps(5x800mw), Veerlapalem(v),damercherla(m),nalgonda(dist)

Description: Appointment Of A Project Management Unit (pmu) For Providing Project Management Support On Various Tourism Works Undertaken By Goa Tourism Board (gtb), Government Of Goa.

Description: Lot No.ws/ers/12/04/25-26/bg/cond./wag9h/elec.loco(acc), Description- Unserviceable Accidental Condemned Electric Locomotive No: Wcr 34019wag9h. Loco To Be Sold Without 02 Numbers Dummy Bogies With All Fittings And 06 Nos. Wheel Sets With All Fittings. The Main Transformer Included For Sale Is Removed For Measurement Chamber And Is Kept At Shop Floor Of Ers/poh Which Will Be Delivered From Ers/poh. (all Other Salvageable Items Are Already Salvaged By The Custodian). Special Condition : 1) The Condemn Electric Loco Will Be Placed At Reclamation-yard Siding In Front Of Rpf Post R-yard Near Gate No-12 Ws/kgp For Cutting And Loading Purpose After Sale. 2)purchasers Are Requested To Inspect The Condemn Loco As Well As Specified Cutting Spot Before Bidding And Should Satisfy Himself About The Condition And Content Of The Materials As It Is Sold On "as Is Where Is Basis". No Complain/claims By The Purchaser Will Be Entrained In This Regard Post Sale. For Inspection Of Condemn Loco And Advance Program May Prepared In Consultation With Custodian. Necessary Co-operation Will Be Provided By Custodian. 3) Cutting/dismantling Of Material (except Excluded Fitting) Are Allowed/permitted For Loading And Delivery Purposes. 4) The Purchaser Has To Make His Own Arrangement Such As Tools, Lifting Equipments/vehicle And Trained Men For Cutting And Dismantling The Components Of The Condemn Loco As Per Requirements. 5) The Accidental Loco To Be Sold Without 02 Nos Dummy Bogies And Without 06 Nos Wheel Sets And All Accessories Are To Be Handed Over At The Location As Specified By The Concerned Sse. 6) The Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In The Near Vicinity Of The Cutting Spot Is Damaged In Any Way. The Purchaser Will Be Held Responsible For Any Damage/ Fire Accident To The Railway Property Caused During Cutting Or Delivery. The Purchaser Will Be Solely Responsible For Any Loss Of Life (rly Employee Or Any Other Person) Caused Due Any Activities Involve While Dismantling/cutting/ Loading Of The Sold Loco. 7) It Is The Responsibility Of The Purchaser To Segregate And Remove The Unwanted And Leftover Scrap Before The Compliance Of The Lot. Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean Otherwise He May Be Penalised By The Railway. 8) The Delivery Of Last 10 Percent Scrap Of Subject Lot Will Commence After All Excluded Fitting Are Handed Over To Custodian. 9) The Purchaser Has To Comply All Rules And Regulation Of Central Pollution Control Board Prevailing/existing In The Cutting Spot During The Cutting And Dismantling Operation Of The Loco And Handling Of Any Hazardous Materials Mentioned By The Central Pollution Control Board, India 10) Delivery Will Be Given In Numbers.

Description: 98090800 Scrap Ferrous Material Consisting Ofangle Channel Structure, Plate Structure, Flat Structure, Pipe Structure, Tie Bar Structure, G.i.ohe Pole Structures, Jali Structure, Hand Trolly, Plate Channel Rack, Ladders, Sab Regulator Parts, Rail Dolly, As Cylider Carrier Trolly, Tank, Cabin, Table Stand , Tray, Tank Structue M S Rod, Attached Rail Pieces, Structure Grder, Flat Bar, Lc Gate Structure,signaling Eye Rod, Havy Sole War, Dom Fitting Pipe, Different Type Of Boards,ms Bond Patti, Jalli Gate, Sariya, House Door, Truss Gutter Valley, Facia Angle 250 Mm, L C Gate, Booms ,pwi Push Trolly, Dip Lorrie, Angle, Brake Shoe Head, Dido Pannel, Channel, Data Loger, Empty Box, Pcs Of Pipe Frames,signaling Ladders Sort And Sizes. With Or Without Attachment If Any Other Ms Items And Miner Attachment Of Nf If Any.note: Cutting Allowed For Easy Loading Before Delivery.

Description: Aluminium Cables With Insulation Scrap. Different Size And Length. N.b. The Successful Bidder Should Submit The Pollution Control Board Pass Book And Other Relevant Documents As Per The Extant Rules At The Time Of Taking Delivery For Verification Of Originals And Entry Of Delivered Quantity In Pcb Pass Book. If The Purchaser Fails To Comply With This, Emd-bsv Will Be Forfeited

Description: Tggenco-ktps Vii Stage/paloncha - Supply Of Float And Float Cum Boost Charger Along With Dc Distribution Board.

Description: Supply, Installation And Commissioning Of Hot Air Solder Levelling (hasl) Machine For Printed Circuit Board Manufacturing Facility. (tin/ Lead And Lead Free)