Boards Tenders

Description: 13224- Loco-01no- Delivery On Number Basis. Lot No. 5321 24 11 55 Gtl Gtl S.loco Ap. Available With Sse Dsl Gtl Serviceable Alco Diesel Locomotive 01 No 13224 / Wdg3a. The Age Of Said Locomotive Is Completed 18 Years 8 Months As On 01.07.2024, Last Poh On 03.12.2013 Weight Of The Loco Is 118.767 Mts Approximately. Loco Was In Working Condition And Intact When Stabled. Alco Loco No. 13224 / Wdg3a Will Be Sold In Intact Condition. Earned Kilo Meters Since Last Poh: 4,90,984 Kms., Alco Loco No. 13224 / Wdg3a /gtl Stabled On 25.06.2024, Schedule Particulars: Date Of Commissioning: 11.10.2005, Last Poh: 03.12.2013, Yearly: 10.01.2024, M2:14.04.2024, T2:01.06.2024. Complete Loco Will Be Sold On ¿as Is Where Is Basis¿. The Weight Of The Loco Is Without Supplies And Including Battery Lead Weight. Any Hsd Oil, Lube Oil And Other Oils If Found Same To Be Handed Over To Railways. Supply Of Lubricants, Fuel Oil And Coolant Water Etc., Will Be Chargeable Extra. .ds-8 Nos:-053211055 Dated: 08.11.2024. (total Quantity- 118.767 Mts( Approx) Available On The Rail Of Diesel Loco Shed, Guntakal. (as Is Where Is Basis). Hsn Code: 720429/gst 18%. For Photos Of This Lot, Kindly Click On View Lot Image On Bottom Left Side. Special Conditions: 01. The Gst Applicable Is @18 % Extra. 02. Cost Of Fuel, Lube Oils And Water And Any Other Miscellaneous Works Etc. Will Be Borne By The Purchaser, Post-sale Directly From The Shed In-charge. Only After These Charges Are Paid By The Purchaser, The Delivery Of The Loco(s) Will Be Handed Over To Them. 03. Payment Of Haulage Charges As Per Prevailing Railway Board Rates As Indicated In Circular No.5 Of 2023 Dated 29.03.2023 Or As Modified From Time To Time, Will Be Borne By The Purchaser. For Enabling Smooth Disposal Of The Loco(s) Post-sales, The Written Tariff Applicable On This Account Is To Be Got By The Purchaser From The Traffic Department I.e. From The Concerned Area Manager¿s Office Or Sr.dom Of The Concerned Division, Wherever The Locos Are Stabled For Sale And Delivery, Before Actual Delivery By The Nominated Concerned In-charge Of The Shed. 04. Engine Haulage Charges For The Movement Of Engines On Private Account Is Applicable In Consultation With The Operating Department Or As Advised By Sr.dom Of The Concerned Division Where Loco(s) Are Stabled And Siding Charges, If Any Are To Be Paid By The Purchaser In Addition To The Purchase Cost Of The Locomotive. 05. Any Other Incidental Charges Arising Thereof (if Any) At The Time Of Taking Delivery Of The Loco(s) Will Be Borne By Purchaser. 06. The Cost Of The Sale Of The Loco(s) Are Exclusive Of Any Scheduled Work Such As M4 Or M6, Which Is Required To Be Done By The Purchaser After Taking Delivery Of The Diesel Locos And/or In Consultation With The Mechanical Department Of The Shed Etc. After Due Payment For These Works As Applicable Thereon.

Details: Description:- Supply,wiring/rewiring,testing&commissioningof Led Light Points, Ceiling Fans points, Fresh Air Fan Point And Exhaust Fan Point Etc. Along With Frls/frlsh Multi Strand Copper conductor Wire Pvc Insulated 1100 V Grade, Isi Marked Size 1.5 Sq. Mm. Separately For Phase And neutral For Each Circuit From Switch Board To Point Without Joint In Circuit And Along With 14 Swg Bare copper Wire For Earth Continuity Along With All Accessories Such As Minimum 5 Amp Modular Type switches, Modular Base And Cover Plate, Ceiling Rose/ Batten Holder, Brass/steel Screws, Junction Box cover, Ceiling Fan Box Cover Of Suitable Size, Ceiling Rose Etc As Required At Site. However 4.0 Sq Mm multi Strand Copper Conductor Wire, Pvc Insulated, 1100 V Grade, Frls/frlsh, Isi Marked For Phase and Neutral Separately Along With 14 Swg Bare Copper Wire For Earth Continuity Will Be Provided For maincircuitfrommdb/ldb/sdbtoswitchboard&aspertechnicalspecificationsandsite requirements. (the Wiring Will Be Done In Ms/pvc Conduit Pipe As Per Schedule Of Work).

Details: Description:- Supply And Erection Of Earthing With Earthpit By Made Of B Class Gi Pipe Of 3000 Mm length, 50 Mm Diameter & 3.6 Mm Thickness. The Gi Strip ( Should Be Welded With The Earth Pipe. The pipe Is Provided With A Tapered Casing At The Lower End In Order To Facilitate The Driving. A Funnel With perforated Plate To Be Provided At The Top Of The Pipe For Pouring Water During Dry Season To Have An effective Earth Value.the Connecting Conductor From Earth Electrode To The Distribution Panel Board should Not Be Thinner Than 8 Swg Gi Wire To Carry The Fault Current. The Earth Fill Shall Be Of homogeneous Layer Of Common Earth Soil. Where Soil Restivity Is High, Earth Restivity Enhancing material May Be Used, Bentonite Or Similar Earth Enhancing Material May Be Used In Rocky Soil. Earth box To Be Precasted Rcc And The Values Of Earth Resistance Measured Should Be Painted On The Earth pit Cover/lid Along With The Date Of Measurement. As Per Drg. No. Drg No: Pcee/elg/drg/2024/1 dated 30.09.2024 & As Per Technical Circular No. El/ps/2024/1 (earthing System).

Description: Scrap Condemned Electric Loco No. 23221/wag5/taochi/asn As Is Where Is Basis . The Loco Will Be Sold Without Following Excluded Fittings (i) Wheel Sets With Axle- 06 Nos, (ii) Axle Boxes- 12 Nos , (iii) Bull Gear- 06 Nos . Condition- 1.the Purchaser Should Visit The Condemned Loco As Well As Its Actual Location Before Bidding, 2. Details Of Serviceable Items Which Have Been Removed From The Condemned Loco Have Been Uploaded As Image In Lot Details Page And Is Also Available With The Custodian,,3. The Scrap Loco Is Sold On As Is Where Is Basis Therefore Railways Does Not Guarantee For Quality Or Quantity As Per Description Etc. And Railways Is Not Responsible For Any Type Of Shortage During Delivery, 4.dismantling And Cutting Is Permitted For Loading And Delivery Purpose, 5. The Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles/vehicle And Necessary Trained Men For Cutting And Dismantling The Components Of The Condemned Loco As Per Requirements, 6. The Purchaser Is Required To Stack All The Reclaimable/excluded Items At One Location Well Away From The Cut Up Parts Of The Locos And It Is Required To Be Returned To The Custodian Before Affecting The Delivery. Purchaser Should Take Adequate Precaution During Dismantling Of Excluded Fittings Item So That The Same Can Be Return Over To The Custodian In A Sound, Undamaged And Intact Condition Otherwise Railway Reserve The Right To Recover The Amount Against Damaged Item Prior To The Delivery, 7. The Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In The Near Vicinity Of Cutting Spot Are Damaged In Any Way. The Purchaser Will Be Held Responsible For Any Damage/fire Accident To The Railway Property Caused During Cutting Operation Or Delivery, 8. It Is The Responsibility Of The Purchaser To Segregate And Remove The Unwanted And Leftover Scrap Before Completion Of Delivery Of Loco. Purchaser Has Also To Keep The Cutting And Loading Spot Neat And Clean, Otherwise He May Be Penalized By The Railway, 9. The Purchaser Has To Comply All The Rules And Regulation Of Pollution Control Board Prevailing/existing In The Cutting Spot During Cutting And Dismantling Operation Of Condemned Loco, 10. The Purchaser Should Be Aware Of The Fact That Total Wt. Shown Against Heading [lot Wt. In Mt] In Lot Details Page Under Ireps Portal Is Indicative Only Against This Lot And Purchaser Should Note That During Delivery Of The Lot, The Above [lot Wt. In Mt] In Lot Details Page Is Not To Be Taken Into Consideration, 11. Bidders Are Required To Check The Detailed Conditions And Amendments / Modifications If Any, In Special Condition And In Depot Condition Against Each Lot Online For The Lot/catalogue Published For E-auction Purpose Before Bidding. Before Bidding Bidders Are Also Advised To Inspect And Tally Every Details Of The Lot Including Description, Location, Quantity, State, Hsn Code, Gst Percentage Etc With The Actual Material On Ground As Per Offer Kept With The Custodian And If Any Discrepancies Is Found, It Is Required To Be Brought To The Notice Of The Custodian As Well As To This Office For Further Action. No Complaints/claim By The Purchaser Will Be Entertained In This Regard After E Auction Sale, 12. Gst, Actual Tcs And Other Taxes Will Be Calculated At The Time Of Preparation Of Challan For Final Deposition Of Bsv. 13.ground Rent Is To Be Imposed @ 0.5 ( Half)% Of The Value Of The Materials Yet To Be Lifted Per Day Or Part Of A Day Before Initiating Delivery Of The Remaining Un-lifted Materials In Case Of Failure To Lift The Entire Sold Materials Due To The Fault Of The Purchaser's Own Within The Stipulated Free Time Period.

Description: CATEGORY: LED Batten (Q2) , Self Ballasted LED Lamps for General Lighting Services (V2) Conforming to IS 16102 (Q2) , XLPE Cable for Working Voltages up to and Including 1.1 KV as per IS 7098 (Part 1) (Q2) , Piano Type Non Modular Electrical Switch Socket Combination as per IS 3854 and IS 1293 (Q3) , Non - Modular Piano Type Domestic Electrical Switches as per IS 3854 (Q3) , MCB - Miniature Circuit - Breakers for A.C. Operation as per IS / IEC 60898 (Part 1) (Q2) , Piano Type Non Modular Domestic Electrical sockets - IS 1293 (Q3) , Molded Case Circuit Breakers (MCCB) as per IS / IEC 60947 (Q3) , Altoch GP 65 to 70 percent chlorine content granular , Alum crystal , Alum Ferric Gde I , ACSR Conductor size weasel , Cable jointing kit indoor end terminations 95 Sqmm 11 KV , GI Tubing Med Gde 40 mm , Allum sheet 22 gauge 9 pt 9mm plain 8 ft by 4 ft , Rubber mat at size 3 ft by 6 ft by 20mm , Cable jointing kit indoor end terminations 70 Sqmm 11 KV , GI Tubing Med Gde 50 mm , Sluice valve 80 mm , Socket out let multiple socket flush 6 pin 6 by 16 A , Sluice valve 150 mm PN 1 pt 6 , DB SPN 8 way double door , Batten holder PVC , PVC Board 7 inch by 4 inch by 2 inch , Distilled water 5 Ltr pack for battery , PVC Cable 4 Sqmm with aluminium conductor twin core , PVC Casing caping 25 mm , Call bell Ding dong , Gun Metal Gate valve lead tin bronze brass 20 mm , Cable PVC copper S C 1 pt 5 Sqmm , GI Tubing Med Gde 25 mm , Stop cock PVC 20 mm , Bib cock PVC 20mm , Cable copper single core 4 Sqmm , PVC cable 6 Sqm T C , PVC cable coper conductor 2 pt 5 Sqmm S C , Socket 15 AMP , PVC bd 4 inch by 4 inch by 2 inch , Switch single pole piano type one way 16 Amp , Cable PVC 6 sqmm twin core sheathed aluminium conductor , GI Union Socket 50 mm , PVC Connection pipe 15mm by 450mm , Plug Top 5 Amps , Change Over Switch 63 Amp TPN 415 Volt , Heating element 1500 Watt , Gate valve 50 mm brass splinder , Stop cock Brass 20 mm , PVC Connection pipe size 15mm by 600 mm , Gate valve with brass spindle 40mm , PVC Casing caping 15 mm , Tube light fitting complete LED 1 ft by 20 watt , Gate valve with brass spindle 100mm , Pegs alum 75 mm , Cable PVC aluminium conductor 6sqmm single core sheathed , Thermostat switch for gyser 25 or 50 ltrs , Plug Top 15 AMP , DB for MCB 4 Way , GI Union Socket 25 mm , Nipple GI 20 mm 6 inch long , Cord flexible copper 14 by0076 Flexible wire , PVC connection pipe 15 by 900mm

Description: CATEGORY: core unsheathed 1100 Volt 2 point 5 Sqmm , MCB 10KA rep cap B series 230 volt grade 50 Hz 6 Amp Single pole , MCB 10KA rep cap B series 230 volt grade 50 Hz 16 Amp Single pole , Isolator double pole 63 Amp 10 KA , Insulation tape 25mm width of 9 mtr long , Factory made sheet distribution board 12 way , PVC insulated and PVC over all sheathed aluminium conductor cable , 18 watt LED bulb , Ceiling rose with three terminals with ISI mark 230 Volts , Exhaust fan 305 mm sweep , Ceramic IWC white colour. , Vitreous china ceramic EWC white colour , PVC S Trap for IWC EWC , PVC pipe 110mm dia , PVC 110mm dia Tee , PVC 110mm dia Socket , PVC 110mm dia Elbow , Ceramic Wash Hand Basin , PVC pipe 75mm dia , PVC 75mm dia Tee , PVC 75mm dia Socket , PVC 75mm dia Elbow , PVC inspection chamber size 308x308x214 mm , PVC SWR vent cowl 75 mm dia with wire mesh , Vitreous china urinals half stall of size of 560x430x820mm white colour , CP Grating with hole for waste pipe , CP Grating without hole , PVC Floor trap 75mm dia , Wash Hand Basin shelf of PVC wall mount , Hot and cold long neck mixture for wash hand basin centre hole type , Bib cock CP long neck 15mm bore fancy type , CP Angular Stop cock with wall flange brass , CP normal Stop cock screwed down high pressure , PVC stainless steel pipe 15mm dia 450mm long ISI mark , Corner shelf of PVC wall mount wide 250mm , CP Towel Rail 600mm long 20mm dia. , Chromium plated CP soap dish ISI Mark , Decorative Looking Mirror , Wall Peg set 4 Nos Peg ands plastic tip , White Cement 1 Kg bag , Teflon Tape , 12 mm frosted glass with fitting arrangement for urinal partition , PPR Pipe 3 layer with 25mm dia , PPR Pipe 3 layer with 16mm dia , PPR Tank connector 25mm dia , PPR Gate valve connector 25mm dia , PPR Elbow 90 degree plane 25mm dia , PPR Elbow 90 degree plane 16mm dia , PPR Tee reducer 25 to 16mm dia , PPR reducer 25 to 16mm dia , PPR Union outer dia 16mm dia , PPR Union outer dia 25mm dia , PPR Wall Clamp dia 16mmdia , PPR Wall Clamp dia 25mm dia , PPR Socket 16mm dia , PPR Plug dia 25mm dia , PPR Plug dia 16mm dia , PPR Threaded Elbow 16mm dia , PPR Female Threaded Socket 16mm dia , PPR Female Threaded Socket 25mm dia , Insulation for 25 mm dia PPR pipe , Insulation for 16 mm dia PPR pipe , Adhesive solution SR 998 , PPR Tee 16mm , PPR Tee 25mm

Description: CATEGORY: Nails steel wire round assorted , Washer plain steel 9mm , Washer spring single coil type B steel 8mm , Washer spring tension 10mm , Washer spring single coil 12mm , Pin cotter split 1.5mm 25mm , Pin cotter split 1.5mm 40mm , Pin cotter split 2.5mm 80mm , Pin cotter split 0.8mm 10mm , Nails brad cut assorted , Washer spring single coil type B steel 2.5mm , Spring washer single coil type B 6mm , Washer spring single coil type B steel 7mm , Washer spring single coil type B seel 14mm , Washer spring single coil type B steel 2.5mm 16mm , Washer spring single coil type B steel 18mm , Pin split cotter 2.5mm 25mm , Pin cotter split 2.5mm 50mm , Pin cotter split 8mm 80mm , Rivet snap head copper 3mm 20mm , Rivet solid snap head copper 6mm 40mm , Pin cotter split 3mm 25mm , Solder soft grade 10 SWG RC 5090 Tin , Piping copper 8mm 0.8mm , Tubing seamless copper 12 0.8 , Tubing seamless copper 16 1.2 , Flux welding aluminium 110G container , Bronze 450 GM container welding metal rod 450grm , Iron caste super silicon 3.15mm , Iron caste super silicon 6.30mm , Welding metal rod copper 5.00mm , Abrasives cloth emery or corundum IS grit 180 , Abrasives cloth emery or corundum IS grit 100 , Abb cloth emery grit 50 , Abbrasives paper glass IS grit 120 , Abrasives paper emery or corundum IS grit 180 , Abrasives paper emery or corundum IS 36 , Acid hydrochloric technical , Soap laundry 12cm 5.5cm 5cm , Adhesive movicol L Fevicol SR 988 , Adhesive syn resin resin araldite AY 103 tube , Adhesive sealing metal , Paint RFU finishing air driying syn ena black , Paint RFU finishing syn ena white , Paint RFU finishing driying syn ena red oxide , Inhibitor corrosion vapour barrier water soluble , Detergent solution general purpose , Cement for brass aluminium to rubber joint , Adhesive universal 225 gm , Graphite flake for lubricant , Tubing rubber internal dia meter 6.3mm , Tubing rubber internal dia meter 10mm , Tubing rubber internal dia meter 20mm , Tape adhesive transparent waterproof 40mm 675mm , Paper wrapping craft 1189 MM 100mm , Compound mastic joint cork sheet thick 1.6 mm , Compound mastic joint cork sheet thick 2.4mm , Compound mastic joint cork sheet thick 3.2mm , Joining asbestos fibre compound graphited 0.8 mm thick 100 100mm , Jointing asbestos fibre compound graphited 1.6mm , Jointing asbestos fibre compounded graphite 3.2mm , Packing asbestos braided yarn core rounded 6.4mm dia , Packing asbestos braided yarn core round 9.5mm , Asbestos mill board thickness 1.6mm , Tapes insulating Inch

Description: CATEGORY: File cover printed , File cover Brown , File cover White , Xerox Paper A4 size 80 GSM , Xerox Paper Legal size 80 GSM , Bond Paper A4 Size , Cartridge 12 A HP Black , 88A compatible toner cartridge HP Black , Cartridge 110A HP Black , Cartridge CWC 102 2K , Richo Xerox toner HS 2014 , Richo Xerox toner SP 2501 , Tissue paper Box , File cover box type , Pen blue Make Cello Techno tip , Pen Red Make cello Techno tip , Pen Black Make cello Techno tip , BEE FLY spring steel binder clip 19 mm , BEE FLY spring steel binder clip 25 mm , BEE FLY spring steel binder clip 32mm , BEE FLY spring steel binder clip 41 mm , Calculator 12 Digits Make CASIO , Gum bottle camel 300 ml , Cello transparent tape 1inch , Cello transparent tape 2 inch , Cardboard Lever Arch Box File , Colin , Coloured flag 3 colour 4 Colour , Oddy 8 ml fluid Correction pen , Army Dak file folder , Cotton flannelettes 14x20 inch , Envelope 20x16 inches Green cloth fine 90 GSM , Envelopes in size 229x324 cm with cloth liner green coloured , Envelope 11x 5 inches containing 100 Nos in a pkt Green coloured , Envelope 06 x 04 inches , Envelope 10 x 12 inches , Envelope 09 x 04 inches , Brown tape 2 inch , Dusting cloth , Dusting cloth Yellow , Table Note book , Fevicol tube 300 gms , Fevicol 500 ml , Glue stick Kores Non toxic 30 gm , Hand note book , Sketch Pen , Office Table Blazer green cloth 5 inch width , Fiber castell permanent highlighter pen , OHP Soluble pen set Marker OHP , Oddy 50 x 75 mm 75 GSM self adhesive paper note , Card board lever arch box file , Paper cutter big steel , Paper pin , Note pad Officers , Engagement pad 2024 , Glassed Paper weight , Pencil , Pencil sharpner , Poker steel , Room Freshner Airwic , Register 100 Pages , Register 200 Pages , Register 500 Pages , Register 300 Pages , Register 400 Pages , Odonil Room spray Citrus fresh , Scale plastic , Scale steel , Unbranded 75 mm inner diameter of packing tape , Stappler Big Hp-45 , Stapler small 10 Y , Stapler pin small no 10 , Stapler pin medium , Stapler pin Big , Bleached cotton yam tag , Borosil 350 ml drinking glss , Add Gel pen blue V7 , Add Gel pen black V7 , Apsara Eraser 20 , Tag red long , Plastic rope 5 mm , Add Gel pen Red V7 , Metal paper Jump clips , Marker Pen Permt , Gem clip multi coloured , CD Recordable Compact , CD Cover , Hand Sanitizer 100 ml , Hand Sanitizer 500 ml , Pencil cell AA , Liquid hand wash , Branded DVD 4.7 GB R , Add Gel pen Green V7 , Scissors Medium for all purpose at office , paper punch single hole , Carbon Paper , Calculator scientific , Wall clock as per sample approved , Cup and Saucer , Pen Pilot Blue V5 , Pen Pilot Red , Pen Pilot Black , Paper A3 size , Drawing pin , Cello tape half inch , Pad Lock 65mm , Tag White Small

Description: CATEGORY: Z6 R72 172-74-303-5 OR 273003510169 INSTRUCTION PLATE , Z6 R72 165-30-10SB 1 SHOCK ABSORBER , Z6 R72 5340-176220 BAND RETAINING DRG NO 432-24-064-1 , Z6 R72 MISC-GOST-6402-70 H-1012 WASHER 4.65G.06 , Z6 R72 5999-006714 CONTACTOR TKD -501-DOD , Z6 R72 1290-000682 OH SWITCH BOARD FIRE CONTROLE 902A , LV1 R72 175-70-024SB FAN , LV1 R72 GB-301-380- 2600MSB SHAFT FLEXIBLE MODEL GB-301-M-01 , LV1 R72 432-17-009-1 DRUM OUTER , LV1 R72 172-32-610 SHIELD REAR MIDDLE , LV1 R72 165-35-108 OR 165-35-108A WING NUT , LV1 R72 172-15-021SB-2 BRACKET , LV1 R72 175-37- 007SB-1 SWITCH ELECTRIC SMOKE GENERATING EQPT , LV1 R72 520-10-009-03 GASKET , LV1 R72 176-34-023 PACKING SHEET , LV1 R72 172-62-123 SPRING , LV1 R72 GOST 9650- 80 6-6D11X22 SPINDLE 6-6D11X22.38XC.2.35.5.45-5TS6XP , LV1 R72 172-31-129 GASKET , LV1 R72 432-40-199-1 GASKET , LV1 R72 432-40-089-1 GASKET , LV1 R72 5306- 056776 BOLT M6 X 16 DRG NO 520-01-008-03 , N1 R72 3040-023428 1 UPPER HOUSING ROTARY CONVEYR MANULDRIVE , LV1 R72 172-66-040-1 COUPLING , N1 R72 1015-004040 COVER FOR RAMMER , LV1 R72 ETU 500 40 BEARING 941 15 , LV1 R72 175.56.009SB NECK , Z6 R72 5930-028720 BUTTON 172-74-330 , N1 R72 5330-008526 GASKET FOR CARTRIDGE BASE DISPOSAL MECH DRG NO 165-17-205 , LV1 R72 5315050953 PIN HINGE DRG NO 172- 02-067-1 , N1 R72 5315-008523 PIN 4U8X18 OST-3-2234-80 , LV1 R72 175.04.045A STRAP , LV1 R72 GOST 17473-80 SCREW BM5X30-46-016 , LV1 R72 TU32-TSTBP-04-89 SEAL 10 6,5 , N1 R72 1015-004216 OR 1015-004130 GUIDE POST 1250 172-25-095 , LV1 R72 54-101-77SB A BOX , LV1 R72 172-62-038-2 LEAVER RIGHT HAND , LV1 R72 172-62-115-1 BUSHING , LV1 R72 432-95-333SB-1 APPLC PRESSING BUSG OF FINALDRIVECARRIER , LV1 R72 9GB-330-026 RMS 339 HAND WHEEL KNOB , LV1 R72 172-32-634 CAP , LV1 R72 5305099876 SCREW, BM4-6GX8.46.016 , Z6 R72 RSG-10M- 030 BOLT , LV1 R72 172-65-077 SUPPORT

Details: Supply on rent, erection, making complete arrangement / set up required for successful organizing of "Kapilvastu Mahotsav 2025 from 29.01.2025 to 02.02 2025" in B S A Ground, Siddharthnagar including arrangement for Inaugural function on 29.01.2025 and Closing ceremony on 02.02.2025" as a complete Job (Complete works of erecting, decorating stage based on Mahotsav Theme, lights, sound & PA system, proper lighting of the whole venue, LIVE telecast L.E.D. based display board, electric & flower decoration of venue, entry gate, all tentage works like - German hanger, stage, tin stall, sofa, chairs, carpet, table, barricading (ballies & Mojo), food courts, Green house, safe house with attached toilet, Videography, Photography, erection of offices for medical camp, water dispenser, electricity etc. erection of CCTV control room, camp office of chairman/ VIP, Signages, CCTV/ CC Camera etc., walky-talky, onsite branding, silent generator sets (AVR system) of required capacity, and other necessary items on rental basis for successful organizing of Mahotsav including hiring, loading, transportation, unloading, labour, material, fuel, T&P and Technical personnels excluding GST (to be paid extra as per actual) etc & dismantling all erected work after end of Mahotsav (Event) complete in all respect including operation and maintenance of whole temporary infrastructure during the Mahotsav (event) period on item rate basis as per the satisfaction of Mahotsav Samiti.