Boards Tenders

Description: CATEGORY: ITEM1SparePartsForDanfossMakevVFDs Softcharge PCA w slash brkt coat. D frame Part No. 176F8306 , ITEM 2Current sensor 300AMP Part No. 176F8342 , ITEM 3Cable power card to gate drive card D1 Part No. 176F8363 , ITEM 4Cable gate drive card to IGBT mod. D1 Part No. 176F8364 , ITEM 5Gate drive board coated D slash E slash F frame Part No. 176F8626 , ITEM 6Ribbon cable ctrl card to power card Part No. 176F8641 , ITEM 7Ribbon cable ctrl card to power card Part No. 176F8641 , ITEM 8Power Card 75kW 400V Part No. 130B1938 , ITEM 9Power Card 30kW 400V Part No. 130B1926 , ITEM 10Power Card 15kW 400V Part No. 130B1921 , ITEM 11Rectifier SCR 181A 1600VPart No. 176F8318 , ITEM 12Inrush SCR slash Diode Module 1600V 250A Part No. 130B1888 , ITEM 13Thyristor 1600V 220A Part No. 130B2449 , ITEM 14IGBT Dual 1200V 300A Part No. 130B2451 , ITEM 15Cable jumper slash cable jumper 44 pole c1 hypen 2 Part No. 134B5474 , ITEM 16Cap bank 450V 6 cap Part No. 176F8325 , ITEM 17Capacitor 4400 micro Farad 20 percentage 20 percentage 450V Part No. 134B1875 , ITEM 18DC bus capacitor 4500 micro Farad 450V Part No. 130B1423 , ITEM 19DC bus capacitor 3700 micro Farad 450V Part No. 130B1422 , ITEM 20Cur. trans. card 500V frame C2 slash C4 slash H7,8 slash I8 Part No. 130B1897 , ITEM 21 Control Card w slash o safe stop for FC hypen 102 Part No. 134B1730 , ITEM 22Control Card w slash o safe stop for FC hypen 301 Part No. 134B1728 , ITEM 23Heat sink fan assy. for frame D Part No. 176F8329 , ITEM 24Top fan IP00 for D frame Part No. 176F8639 , ITEM 25Fan assembly 60x60x25mm Power card C1,C2 Part No. 134B6864 , ITEM 26Fan assembly 172x150x51mm IP21,55 Part No. 134B6865 , ITEM 27Fan assy 127x127x38mm IP20 coated 18W Part No. 134B6867 , ITEM 28Fan assy 120x120x38mm IP20 coated 12W Part No. 134B6866 , ITEM 29Ext. Fan ass 120x120x38mm coated B3,H10 Part No. 134B7249 , ITEM 30Fan assembly 80x80x25mm coated Part No. 130B1097 , ITEM 31Fan assembly 70x70x25 mm coated Part No. 130B1096 , ITEM 32LCP Mounting Kit, w slash no LCP Part No. 130B1117 , ITEM 33VLT Registered Trademark Symbol Control Panel LCP 102 Part No. 130B1107 , ITEM 34Control Card with safe stop for FC hypen 302 Part No. 134B1726

Description: BOQ ITEMS: Cusion with Cover 21inchx22inchx4inch, Cover for Cushion 550X525X100mm, seat cushioned foam 21inchx22inchx4inch 40 density, Cushion Seat with Rexine Cover for chair dining Cushion, Leg of Charpoy GI Pipe 32mm and 408mm Length duly threaded at one end, Cushion back with Rexine Cover for chair Easy Cushion as per FD-358, Cushion Seat with Rexine Cover for chair wrting Cushion as per FD-1107, Cushion back with Rexine Cover for chair wrting Cushion as per FD-1107, Cusion with Cover for stool dressing Lades (MAP) as per FD/MAP-II/07., PVC seat and back for chair varandah FD/MAP-II/06, Back for Chair steel made of shesham and duly canned by 2mm half round plastic cane 4mm (Ref drg FD-75(M), Plywood 8inchX4inchX12mm one side teakface, Plywood Teakface 8inchX4inchX6mm, Long rail GI 32mm for GI chorpoy size 2 mtrs long both side duly threaded, Tape Newar Nylon 50mm wide., Plywood 8inchX4inchX9mm thick BWR Commercial, Short rail GI 32mm for GI chorpoy size 900 mm long both side duly threaded, Plywood BWR Commercial 8inchX4inchX12mm, Plywood 8inchX4inchX4mm one side teak face, Plywood 6feetX4feetX19mm, Plywood 7feetX3feetX12mm, PLB 2400 x 1200 mm x19mm, Lakh Dana, Handle CP for Almirah Steel 100mm, GI Tubing 32mm, PVC Seat for chair dining Make Amko as per FD/MAP-II/05, Handle SS for Locker Steel, Plywood commercial 8feetX3feetX19mm, Light Siller (NC Sanding), Plywood 8feetX4feetX4mm, Pre laminated Particle Board 2.75X1.83X18mm thick, Shocker (Hydraulic Spindle) for Chair Revolving, PVC Shoe for chair With Screw as per sample., GI Elbow 32 mm 3 way, Paint White Enamel, Handle for table bed side, Lock 50mm for Almirah Med Steel, Touch wood, Plywood 6feetX4feetX9mm, Spirit Dentured best quality, Lock for Almirah Steel Medium 75mm, PVC Base for Chair Revolving with wheel, BWR plywood 1800x1200mmx12mm, Paint Synthetic Enamel Olive Green, Fevicol SH, Lock for Steel Almirah large 77mm, Telescopic Channel 14inch Long, Turpentine Oil, Thinner, Telescopic Channel 8inch Long, Fevicol SR, PVC Bush for Chair Visitor, French Polish, Hessian Cloth 48inch Wide Clossly Woven, Cloth Malmal, MR plywood 2400 x 1200 x 6mm , Teakwood beading 6mm thick 18mm wide, Paint synthetic Enamel Black , Palmet Patti, Asian paints liquid varnishes or shellac varnish, Screw wood 35mm (Gypsum) (100nos/pkt), Screw wood steel 50mm (Gypsum), BWR plywood 1800x900mmx12mm, Screw wood 45mm (100nos/pkt) (Gypsum), Paint SE Smoke Grey, Paint Brush 75mm, Paint Brush 50mm, Looking Mirror for Table Dressing Gents760x380x5mm, Knob fancy in Teak Shade, Emery Paper No-120, Screw Wood Steel 40mm (Gypsum), Wooden Scantling 75X25X2000mm Long, Nails wire 75mm, Hasp & Staple CP 2inch, Nails wire 32mm (headless), Screw 75mm, PVC Arms for Chair Visitor, Emery Paper No-100, Paint Brush 25mm, Teakwood Beading 4mm thick 18mm wide, Bow Handle Aluminium 100mm, Nails wire 20mm, Nails Wire 50mm 14 No, Screw wood steel 65mm (Gypsum), Screw Wood steel 25mm(100Nos) (Gypsum), Nails wire 1/2inch Head less 18 No, Nails wire 50mm, Nails Wire 40mm 14 No, Nails wire 100mm 14 No, Screw wood steel 30mm (Philips Head)

Description: CATEGORY: Strainer for BD 80 Dozer Model 2010 , Hose for BD 80 Dozer Model 2010 , Screw for BD 80 Dozer Model 2010 , Washer Spring for BD 80 Dozer Model 2010 , Terminal Positive for BD 80 Dozer Model 2010 , Terminal Negative for BD 80 Dozer Model 2010 , Cable Assembly for BD 80 Dozer Model 2010 , Lamp Assembly for BD 80 Dozer Model 2010 , Engine Oil PR Guage for BD 80 Dozer Model 2010 , Charger Lamp for BD 80 Dozer Model 2010 , Bolt for BD 80 Dozer Model 2010 , Washer for BD 80 Dozer Model 2010 , Nut for BD 80 Dozer Model 2010 , Master Pin for BD 80 Dozer Model 2010 , Bolt Shoe for BD 80 Dozer Model 2010 , Nut Shoe for BD 80 Dozer Model 2010 , Bushing Master for BD 80 Dozer Model 2010 , Element Filter for BD 80 Dozer Model 2010 , Joint for BD 80 Dozer Model 2010 , Air Cleaner Filter for BD 80 Dozer Model 2010 , Engine Oil Filter for BD 80 Dozer Model 2010 , Fuel Filter for BD 80 Dozer Model 2010 , Hydraulic Filter for BD 80 Dozer Model 2010 , Dash Board Lamp , Dip Stick for engine Oil Level for BD 80 Dozer Model 2010 , Radiator Cap for BD 80 Dozer Model 2010 , Pin Cotter for BD 80 Dozer Model 2010 , O Ring for JCB 3DX Super Model 2019 , O Ring Dust for JCB 3DX Super Model 2019 , Kit Drain Valve for JCB 3DX Super Model 2019 , Hose for JCB 3DX Super Model 2019 , Teeth for JCB 3DX Super Model 2019 , Anabond 200g for JCB 3DX Super Model 2019 , M Seal 100g for JCB 3DX Super Model 2019 , Grease Adaptor for JCB 3DX Super Model 2019 , Thrade Tape for JCB 3DX Super Model 2019 , Switch Oil Term for JCB 3DX Super Model 2019 , Gator Main Gear Cover for JCB 3DX Super Model 2019 , Oil Dipstick for JCB 3DX Super Model 2019 , Beading All Glass for JCB 3DX Super Model 2019 , Feed Pump for JCB 3DX Super Model 2019 , Light for JCB 3DX Super Model 2019 , Araldite for JCB 3DX Super Model 2019 , Air Cleaner Filter for JCB 3DX Super Model 2019 , Bulb 12V 55 to 60 W for JCB 3DX Super Model 2019 , Bulb 12V 21 W for JCB 3DX Super Model 2019 , Bucket SIM for JCB 3DX Super Model 2019 , Solenoid Switch for JCB 3DX Super Model 2019 , Hand Priming for JCB 3DX Super Model 2019 , Hose 314BSP for JCB 3DX Super Model 2019 , Switch Oil Temp for JCB 3DX Super Model 2019 , Bolt M10X70 for JCB 3DX Super Model 2019 , Ring Parking for JCB 3DX Super Model 2019 , Seal for JCB 3DX Super Model 2019 , Bolt M12X100 for JCB 3DX Super Model 2019 , Spacer for JCB 3DX Super Model 2019 , Bolt 0.5 Inch x 1.5 Inch for JCB 3DX Super Model 2019 , Sealant for JCB 3DX Super Model 2019 , Fuel Line for JCB 3DX Super Model 2019 , Benjo Washer 19mm for JCB 3DX Super Model 2019 , Hose Water Seprator for JCB 3DX Super Model 2019 , Air Vent Plug for JCB 3DX Super Model 2019 , Head Light Assy Right Hand for SSL BOBCAT , Head Light Assy Left Hand for SSL BOBCAT , Ignition Switch for SSL BOBCAT , Thermostat for SSL BOBCAT , Alarm Buck Up for SSL BOBCAT , Oil Filter for SSL BOBCAT , Fuel Filter for SSL BOBCAT , Filter Air Outer for SSL BOBCAT , Filter Air Inner for SSL BOBCAT , Belt Alternator for SSL BOBCAT

Description: CATEGORY: Paper A4 size ISI 75 GSM , Paper Legal ISI Marked 75 GSM , Paper A3 Size ISI Marked 75 GSM , Register 558 Pages , Register 760 Pages , Cartrige HP Laser Jet 12 A For 1020 1020A Printer , Cartrige Epson Model L3110 Bottle type set of 4 , Canon G 7070 Printer Toner All Colour , Cartridge PANTUM P2500 OEM PC 210EK , Cartridge Laser Jet Pro M 203dn , Toner For Brother Fax Machine DR 2260 , HP 56 X Black Toner cartridge For printer HP Laser Jet M436nda , HP Laser Jet Pro MFP M226 dn Toner 88A , Tonner NPG 59 for Xerox Machine OEM , HP deskjet Ink Advandage 2645 Toner , Pitney Bowes Blue PBI Postal Ink Cartrige For Franking Machine model No DM 140 , File Cover Printed with MES Logo and Office Address , Envelop Large 400 x 300mm , Envelop Large 300 x 250mm , Envelops Size 11 x 5 inchesh Green , glue sticks 15gm Fevisticks , Glue Bottle 150ml White , Pen Blue Hi Tech Point 0.5 , Pen Red Hi Tech Point 0.5 , Pen Green Hi Tech Point 0.5 , Add Gel Blue Pen , Add Gel Pen Black , Ball pen Reynoids Blue Liquid 0.7 , Pemanent Marker , High Lighter Red Yellow and green Colour , Correction Tape , Pencil Extra Dark , Pencil Eraser , Pencil Sharpner , Tape Brwon 1 , Tape Brwon 2 , Tape Brwon 4 , Transparent Cello Tape half inche , Transparent Cello Tape 1 inche , Cello Tape Blue half inche , Cello Tape Red half inche , Stapler Kangaro HD No 10 , Stapler Kangaro HD 10D , Stapler kangaro HP 45 , Stapler Pin No 10 , Stapler Pin 26 6 , Gem Clip Paper Clip Plastic Coated , binder clip 19 mm , binder clip 32 mm , T Pin , Scale Steel 30 cm Long , Scale Plastic 30 cm Long , Scribbling Pad 80 Pages , Jute Cord For biding of file , Flag Coloured DESMST Size 1inche x 3inche 150 Sheets Tri Colours , stick pad small , stick pad large , Stamp pad Plastic Small , Blue Ink 500 ml For Stamp Pad , Royal Blue Ink , brown sheet 180 GSM , Talc sheet , Sketch Pen , Hand Wash Dettol , Dettol soap 125 gms , Hand Towel Small Size , Phenyl Liquid 1 Ltr Pack , Naphthalane Ball 500 gms , Duster Cloth yellow , Collin Glass Cleaner , Odonil , All out Machine with Liquid , Broom Cocunut Bamboo , Bty dry 1.5 V AA Size for Wall Clock , Bty dry 1.5 V AAA Size for Remote and Calling Bell , Napkins , Dettol Liquid 500 ml , hand rub sanitizer 500 ml , Room Freshner , Harpic 1 ltr , Broom Shoft , Lizol for Surface Cleaning 1 ltr , Hit Black Kala Hit , Vim Liquid 200 ml , Cotton Mop 6 inche Wide with Stick , Wiper With Handle for Surface cleaning , Dust bin Plastic Small Size , Towel White Size 50 x 20 inches , Self ink Stamp for Dir Wks AAD Pers AAD Leg AAD D and V and Dy dir Cont , Rubber Stamp FR BR , Mini Sticky Note Pad with Different Size of Stickly note Spiral Type , acrylic name plate for SPS , Clip board Plastic size 25 X 9 inches , Uniball gel impact 1.0 mm Blue , uniball gel implact 1.0 mm black , Borosil glass 6 piece set Med , Pen Hi Tech point 0.7 V7 Blue , Pen Hi Tech point 0.7 V7 Black , Pen Hi Tech point 0.7 V7 Green , water Jug Plastic , Mouse Pad , Pen stand for Officer , Coaster , Round stamp , Wireless calling bell , Tea set Officer , Printer head ink system CANON G7070 , Anti Virus Software for 10 user Total security quick heal

Description: CATEGORY: Aluminium Lugs , 35 Sqmm 8 OR 10mm Hole Aluminium Lugs , 50 Sqmm 8 OR 10mm Hole Aluminium Lugs , 4 to 6 Sqmm 6 OR 8mm Hole Ring Type Copper Lug , 16 Sqmm 6 OR 8mm Hole Ring Type Copper Lug , 4 to 6 Sqmm Pin Type Copper Lugs , 16 Sqmm Pin Type Copper Lugs , 1.5 Sqmm Hollow Type Copper Lugs , 2.5 Sqmm Hollow Type Copper Lugs , 4 Sqmm Hollow Type Copper Lugs , 3by4 Inch FLP DC Gland Ex d Gas Gr. IIA OR IIB OR IIC , 1 Inch FLP DC Gland Ex d Gas Gr. IIA OR IIB OR IIC , 1 1by4 Inch FLP DC Gland Ex d Gas Gr. IIA OR IIB OR II , 3by4 Inch FLP Dummy Plug , 1 Inch FLP Dummy Plug , 1 1by4 Inch FLP Dummy Plug , 3by4 Inch Non FLP DC Gland , 1 Inch Non FLP DC Gland , 1 1by4 Inch Non FLP DC Gland , 1 1by2 Inch Non FLP DC Gland , 6 Sqmm FRLS Multistr and Copper Earthing , 4 Sqmm FRLS Multistr and Copper Earthing , 2.5 Sqmm FRLS Multistr and Copper Wire , 1.5 Sqmm FRLS Multistr and Copper Wire , 16 Sqmm Green Aluminium Insulated Earthi , 25 Sqmm Green Aluminium Insulated Earthi , 160A TPN BS TYPE SFU CSSDF160B3N C and S Mak , 315A TPN BS TYPE SFU CSSDF315B3N C and S Mak , 32A TPN BS TYPE SFU CSSDF32B3N C and S Make , 200A TPN BS TYPE SFU CSSDF200B3N C and S Mak , 63A TPN BS TYPE SFU CSSDF63B3N C and S Make , 125A TPN BS TYPE SFUCSSDF125B3N C and S Make , L and T FN 32 SFU , L and T FN 63 SFU , 6mm x 3by4 Inch OR 1 Inch OR 1 1by4 Inch OR 1 1by2 Inch SS Nut Bolt with Dou , 8mm x 3by4 Inch OR 1 Inch OR 1 1by4 Inch OR 1 1by2 Inch SS Nut Bolt with Dou , 3C x 1.5 Sqmm FRLS UG Armoured Copper Ca , 3C x 2.5 Sqmm FRLS UG Armoured Copper Ca , 4C x 1.5 Sqmm FRLS UG Armoured Copper Ca , 4C x 2.5 Sqmm FRLS UG Armoured Copper C , 4C x 16 Sqmm FRLS UG Armoured Aluminium , 4C x 25 Sqmm FRLS UG Armoured Aluminium , 4C x 50 Sqmm FRLS UG Armoured Aluminium , 45W SMD LED Strip FCG OR Baliga OR Sudhir Make , 60W COB LED Strip FCG OR Baliga OR Sudhir Make , 90W SMD LED Strip FCG OR Baliga OR Sudhir Make , 45W SMD LED Driver FCG OR Baliga OR Sudhir Mak , 60W COB LED Driver FCG OR Baliga OR Sudhir Mak , 90W SMD LED Driver FCG OR Baliga OR Sudhir Mak , 10KV SPD Fulham for LED Drive FCG OR Baliga , 7 OR 9W Threded OR Pin Type LED Lamp , 15 OR 16W Threded OR Pin Type LED Lamp , 18 OR 20W Threded OR Pin Type LED Lamp , 30W Thread Type LED Lamp , Weatherproof ON OR OFF Rotary Switch , Weather proof ON OR OFF FLP Push Button , FLP Push Button , 100 mm, 3by4 Inch Entry 4 Way Junction Box , 125 mm, 1 Inch Entry 4 Way Junction Box , 3by4 Inch Heavy Duty Aluminium Strip1.5mm OR 0.9mm , 50 x 6mm GI Earth Strip , 25 x 6mm GI Earth Strip , 5C x 4 Sqmm Cotton Braiding Copper Trail , 16 Way Double Door Distribution Board Le , Single Pole 6A MCB Legr and Make , Single Pole 10A MCB Legr and Make , Single Pole 16A MCB Legr and Make , Single Pole 20A MCB Legr and Make , 2 Pole 25A MCB Legr and Make , 2 Pole 16A MCB Legr and Make , 2 Pole 10A MCB Legr and Make , 4 Pole 40A MCB Legr and Make , 2 Pole 30mA 25A ELCB Legr and Make , 2 Pole 100mA 25A ELCB Legr and Make , 2 Pole 30mA 40A ELCB Legr and Make , 2 Pole 100mA 40A ELCB Legr and Make , 4 Pole 30mA 40A ELCB Legr and Make , 4 Pole 100mA 40A ELCB Legr and Make , MCB Dummy Plate Legr and Make , Earthpit testing , IR Testing motor and cables , Thermography of panels , Vibration analysis of motors OR cable , INSULATING MAT TESTING

Details: Description:- Conducting Final Location Survey (fls) For Broad Gauge Railway Line Along The Existing line With Consultant's Own Labour, Tools, Plants & Equipment, Materials, Transportation With All Lead and Lifts, Duly Taking All Safety Precautions To Ensure Safety, Using Survey Instruments Like Total stations, Dgps, Auto Levels Etc And Using Mx Rail Software As Per The Scope, Terms Of Reference, relevant Provisions Of Indian Railways Code For Engineering Department (1999, Third Reprint) With Up to Date Correction Slips, Special Conditions Of Tender And As Directed By The Engineer-in-charge, including Topographical Survey For 25metre Corridor On Proposed Alignment Side Of Center Line Of existing Track Or On Both Sides Of Proposed Alignment At Diverted Alignment Or Adequate Width In station Yards As The Case May Be, Taking The Longitudinal Levels At Intervals Of 20 M. & At Obligatory points And Cross Sectional Levels At An Interval Of 5m ( Or Less As Decided By Engineer In Charge As per The Terrain) ( Extra Width To Be Covered At Some Locations As Directed By Engineer -in- Charge), including Staking Of Approved Alignment With Cc Pillars (150x150x900mm Size With 300mm Projected above Ground Level) At An Interval Of 100m And With Wooden Pags ( 50x50x450mrn Size) At Every 20m Where Track Is Not Parallel Or Is Away From The Existing Track By More Than 15 M (cost Of Wooden pags In Inclusive).the Rcc Pillars Shall Also Be Fixed On Curves Indicating Transition Portion, Apex point, Crown Of Curve, Beginning And End Point Of Circular Curves, (5 Locations For Each Curve), At major Bridges Two Posts One On Either Side (payment For Cc Pillars Will Be Made Separately As Per item 2 Of Schedule), Including Submitting List Of Distance And Coordinates Of Centre Line Of Proposed bg Line From Centre Line Of Existing Bg Line At Every 20m Interval. The Rate Also Includes Preparation and Submission Of Report Of Final Location Survey (fls) Printed & Duly Bound (2 Sets) And With Two soft Copy In Cd. Note : Detailed Project Report (dpr) Should Be Prepared As Per Railway Board Letter no. 2022/w-1/gen/dpr Proforma (e-off : 3404238) Dt. 13.12.2023

Description: BOQ ITEMS: Earth work in excavation in foundation trenches or drains 1.5 m in width or 10 Sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil . All kinds of soil, Earth work in excavation in foundation trenches or drains 1.5 m in width or 10 Sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil . Ordinary rock., Filling available excavated earth excavated rock in trenches plinth sides of foundations etc. in layers not exceeding 20cm in depth consolidation each deposited layer by ramming and wateringlead up to 50m and lift upto 50m and lift up to 1.5m., Supplying and filling in plinth with sand under flours including watering raining considalation and dressing complete., Providing and laying in position cement concrete of specified grade excluding the cost of contering and shuttering- All work upto plinth level 1 isto 3 isto 6 1 cement 3 fine sand 6 graded stone aggregate 20 min nominal size Cement will be issued free of cost from Turamdih centrak store or Mohuldih departmental store., Reinforced cement concrete work in floor roof slab beam walls any thickness plinth and stiring courses fillets columns pillars piers abutments posts and struts etc and all types of works upto floor five level excluding cost of centering shuttering 1 isto 1.5 isto 3 Cement 1 5 coarse sand 3 graded stone aggregate 20 mm nominal size, Centering shuttering including removal of form work for all tyoes of work for providing and fixing straight shuttering. Foundation foooting bases of columns etc., Centering shuttering including removal of form work for all tyoes of work for providing and fixing straight shuttering. Suspended floorsroofslandingbakaniesshelves etc., Providing hoisting and fixing up to floor five level precast reinforced cement concrete 1 isto 2 isto 4 1 cement 2 coarse sand 4 graded stone aggregate 20mm nominal size, Reinforcement for RCC work including straighting cuttingbending placing in poistion and binding all complete Hot rolled deformed bars or TMT bars., Add or deduct for plaster drip course in plastered surface or moulding to R.C.C projections size 1by2 inch into 1by2 inch., Brick work with F.P.S bricks of class designation 75 in foundation and plinth in cement moral 1 isto 6 1cement 6 corse sand. for all types of works., Brick work with F.P.S bricks of class designation 75 in foundation and plinth in cement moral 1 isto 6 1cement 6 corse sand. Do in superstructure for all tyoes of works., Random rubble with hars stone in foundation and plinth including leveling up with cement concrete 1 isto 6 isto 12 1cement 6 corse sand 12 graded stone aggregate 20mm nominal size at plinth level with cement mortar 1.6 1 cement 6 cparse sand., Providing and fixing ISI marked flush door shutters confirming to IS 2202 PartI decorative type core of black board construction with frame of 1st class hard wood and well matched teak 3 ply vennering with vertical grains or cross bands and face veneers on bioth faces of shutters 35 mm thick., Providing and fixing ISI marked M.S pressed butt hingers bright finished with necessary screws etc complete 125 x 652.12mm, Providing and fixing ISI marked oxidised M.S sliding doors bolts withnuts and screws etc. complete 300 x 16mm, Providing and fixing ISI marked oxidised M.S tower bolt black finish Barrel type with necessary screws etc completed 250x10mm, Providing and fixing ISI marked oxidised M.S handles confirming to IS 4992 with necessary screws etc. completed 125 mm, Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete, Providing and fixing bright finished brass casement stays Straight peg type with nevessary screws etc. completed 300 mm weighing not, Providing and fixing to existing door reinforced plastic FRP panelled door shutter of required and approved brand and manufacutred made with fire retardant grade unsturated polyester resin molded to 3 mm thick FRP laminated for forming holloe rails and styles with wooden frame and suitable blocks of seasoned wood inside at required placed for fixing of fittings cast monolithically with 5mm thick FRP laminate for panels and confirming to IS 14856 2000 including fixing to frames., Structural steel work riveted bolts or welded in built up sections truses and framed including cutting hosting fixing in position steel primer all complete., Providing and fixing 1 mm thick M.S steel cloor with frame of 40 x 40 x 6mm angle iron and 3mm M.S gassed plates at the juctions and corners all necessery fitting complete including applying a priming coat of approved steel primer. Using M.S angles 40x40x6mm for diagonal braces, Providing and fixing factory made ISI marked glazed doors windows and ventilatiors side or top or centre hung with beading and all memebers such as K11 B and K 12 B etc. Completed of standard rolled steel sections joints mitred and flash but welded and sash bars tenoned and riverted with 15 x 3mm lugs10cm long embeded in cement concrete blocks 15x10x10 cm of 1 isto 3 isto 6 1 cement 3 coarse sand 6 graded stone aggregate 20mm nominal size or with wooden plugs and screws or rawl plugs and screws or with fixing crips or with bolts and nuts as required including providing and fixing of hinges pivots floats glass panes with glazing clips and special metal sash putty of aproved make and a priming coat of approved steel primer excluding the cost of metal beading and other fittings except necessary hinges or pivots complete as per approved design and as per the directon of EIC, Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 thickness to be specified by the manufacture of approved make in all clour shades except burgundy bottle green black of any size as approved by Engineer incharge in skirting risers of steps and dados over 12mm thick bed of cement mortar 1isto3 at the rate 3.3 kg per sqm including pointing in white cement mixed with pigment of machine shade complete., Providing and laying vitrified glazed ceramic floor tiles 300x 300 mm or more thickness to be specified by the manufacturer of 1st quality conforming to IS 15622 of approved make in colours white ivory grey fume red brown laid on 20mm thick cementincluding grouting the jpints with white cement and matching pigment etc. complete., Cement plaster skirting Upto 30cm height with cement mortor 1 isto 3 isto 9 cement 3 coarse sand finished with a floating coat of neat cment 3 mm thick., Cement concrete flooring 1isto2isto4 1 cement 2coarse sand 4 graded stone aggregate finished with floating coat of next cement including cement slurry but including the cost of nosing of steps etc. complete.40 mm thick with 20mm nominal size stone aggregate., Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS 13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansion i single socked pipes 110 mm diameter., Providing 15mm thick cement plaster 1 isto 6 1 cement 6 fine sand., 6mm cement plaser to celling of mix 1 isto 3 1 cement 3 fine sand, Neat cement punning, White washing with line on new work three or more coats to give an even surface., Finishing walls with testured exterior paint make Berger 7 yr) weather coat or required shade. On New work (Two or more coats applied at the rate 3.28 ltr per 10 Sqm over and including base coat of water proofing cement paint applied at the rate 2.20 Kg per 10 Sqm., Painting with 1st quality synthetic enamel paint make Asian or Berger or of approved brand and manufacture of required colour to give and even shade. Two or more coat of suitable shade with ordinary paint of approved brand and manufacture., Making plinth protection 50mm thick of cement concrete 1isto3isto6 1 cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size over 75mm bed by dry brick ballast 40mm nominal size grouted with fine sand including finishing the top smooth., Dry brick pitching hair brick thick in drain including supply of bricks and preparing the surface complete with F.P.S bricks of class desigantion 7.5, Providing and fixing water closet squatting pan Indian type W.C pan with 100mm sand cast iron P or S trap10 litre low level white P.V.C flushing cistern with manually controlled device handle lever conforming to IS 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required white viteous china orissa pattern W.C pan of size 580 x440mm with integral tyoe foot rests., Providing and fixing white vitreous china flat back or wall corner tyoe liped front urinal basin of 430x260x350mm and 340 x410x260mm sizes respectively with automatice flushing cistern with standard flush pipe and C.P brass spreaders with brass unions and G.I clamps complete including painting of fittings and brackets cutting and making good the walls and floors wherever required. One urinal basin with 5 liter white P.VC automatic flushing cistern., Providing and fixing P.V.C low level flushing cistern with manually controlled device handle level conforming to IS 7231 with all fittings and fixtures complete. 10 liter capacity white., Providing and fixing wash basin with C.I brackets 15mm C.P brass pillar taps 32mm CP brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever required. White vitreous china wash basin size 630x450mm with a single 15mm C.P brass pillar tap., Providing and fixing 100mm sand cast iron grating for gully trap., Providing and Fixing rectangular shape 453 x 357 mm mirror of superior glass and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard boarding complete as per the direction of E.I.C, Provifding and fixing PVC Soil pipe 100 mm dia., providing and fixing CP towl rail completed with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved qulaity and colour 450mm long towel rail with total length of 495mm 78mm wide and effective height of 88mm weighing not less than 170gms., Providing and fixing 1by2inch brass ISI marked bib cock & stop cock ISI., providing and fixing GI pipes complete with GI fitting including trenching and refilling etc. 15 mm dia nominal bore., providing and fixing GI pipes complete with GI fitting including trenching and refilling etc. 20mm dia nominal bore., providing and fixing GI pipes complete with GI fitting including trenching and refilling etc. 25mm dia nominal bore., providing and fixing GI pipes complete with GI fitting including trenching and refilling etc. 40mm dia nominal bore., providing and fixing GI pipes complete with GI fitting including trenching and refilling etc. 50mm dia nominal bore., Provind and fixing of super zinc colour coated steelcrafazoial or profile tiles colour coated steel sheet a corrugated sheet upto 60m pitch., Provind and fixing of pre coated galvanised steel sheet roofing accessories 0.50 mm plus or minus 5 percent total coated thickness TCT thick zinc coating 120grams as per IS 277 in 240 mpa steel grade 5to7 microns epoxy primeier on both side of the steel and polister of coat 15to18 microns using self drilling self tapping screws or with polymer coated J or L hooks bolts and nuts and or GI seam bolts and nuts. GI plane and Bitumen washers complete. Rigidis 500to600mm, Provind and fixing C.P brass bib cock of approved quality confirming to IS 8931. 15mm nominal bore., Provind and fixing C.P brass stope cock of standard design and of approved confirming to IS 8931 15 mm nominal bore, Provind and fixing gate valve GM 25 mm., Provind and fixing gate valve GM 50 mm., Provind and fixing brass stope cock of approved quality 25 mm nominal bore., Provind and fixing hydraulic door closer, Provind and fixing 15mm dia PVC connector, Providing and fixing glazed stone ware pipe or fume pipe 150 dia, PCC 1 isto 5 isto 10 for stone wire pipes 150 mm dia., Making soak pit 2.5m diameter 3.00meter deep with 45x45 cm dry bricks honey comb shaft with bricks of clas designation 75 and S.W drain pipe 100mm dia meter 1.8 meter long complete as per standard design with F.P.S bricks, Renewal old glass puttyof galss paines Length and painting the same, Renewwing glass panes 4 mm thick with putty and nails

Details: Works contract for execution of providing 1)Improvement estimate for Improving Tail End Voltage for 1no new DT at Vendalicode area in 11KV Thiruvattar Feeder under U KLM section. 2)Improvement estimate for Newly proposed 25KV ADT for Improving Tail End voltage in Kurakudi Mathoor area in Surlacode Feeder under U KLM section. 3)Improvement estimate for segregation of existing HT/LT networks of different feeders in same pole (HT of 11KV CWSS feeders and LT of 11KV Arumanaloor Feeder) for 1no new DT 25KVA under U KLM Section. 4)Improvement estimate for newly proposed 63KVA DT for avoiding DT failure of existing overloaded DT kulasekharam SS I 250 KVA Nagacode Junction area in Thiruvattar Feeder under U KLM section. 5)Improvement estimate for strenghtening of existing HT conductor ACSR 7/2.59 in to ACSR 7/4.09 in location of Vendalicode Tapping to Vendalicode SS II 100KVA in 11KV Thiruvattar Feeder under U KLM Section. 6)Improvement estimate for replacement of 2nos deteriorated 9mtr structure poles 2nos in Ponmanai SS II 100KVA Thiruvattar Feeder under U KLM Section. 7)Improvement estimate for replacement of 9mtr structure poles 2nos in Surulacode SS III 63KVA in 11KV Arumanalloor Feeder under U KLM Section. 8)Improvement estimate for insertion of 18nos 9mtr PSC poles in various locations in 11KV Arumanaloor feeder under Urban Kulasekharam Section. 9)Improvement estimate for changing of existing old type weaked 240 nos 11KV pin insulator and 60 nos 11KV Disc into new type insulators in various locations in 11KV CWSS feeder under U KLM Section. 10)Natural calamity estimate for replacement of 3nos 8mtr PSC pole at loc no. FII/17,18 in Manvilai SS 100KVA and FI/5 in Cherupaloor SS II 250 KVA damaged due to fallen of Rubber tree over HT/LT line under Urban Kulasekharam Section. 11)DCW estimate for shifting of 1no DT for Valiyattumugam SS VI 250KVA as per request of Thiru.Gangatharan at Pillathoor under Urban KLM Section. 12)DCW estimate for 2nos 9mtr PSC poles and line materials shifting as per request of The Executive Officer Thirparappu Town Panchayat under Urban KLM Section. 13)EOS to one number new IIA OHT service to The President Kattimancode Village Panchayat by providing 1No 25KVA DT at Cheruppancode SS III under Vellichanthai Section. 14)Eos to 1no OHT services to The President at Village Panchayat, Kurakudi Mathoor Area by providing 1no 25KVA add.Distribution Transformer in 11 KV Surulacode Feeder Under Kulasekharam Urban Section. 15)Improvement estimate for change the existing 5nos 9mtr pole into 36' RSJ pole and 5nos 9.14 mtr RCC pole into 40' RSJ pole in 11KV Thiruvattar and Surulacode double feeder invarious locations under Urban KLM Section. 16)Improvement estimate for change the existing 3nos 9mtr pole into 36' RSJ pole and 5nos 9.14 mtr RCC pole into 42' RSJ pole and 2nos 9.14 mtr RCC pole into 36' RSJ in 11KV Thiruvattar and Arumanaloor and CWSS feeder invarious locations under Urban KLM Section. 17)Improvement estimate for newly proposed 1nos 25KVA DT for improving tailend voltage in Vendalicode Area in 11KV Thiruvattar feeder under U KLM Section. 18)DCW estimate for LTCT Meter Board shifting and 5 span LT line deviation in LTCT SC no 161-008-129 as per request of Thiru.Gangatharan at Pillathor Valiyatumugam in Valiyatumugam SS VI 250KVA under Urban KLM Section. 19)Improvement estimate for proposal is furnished for demand of 350KVA HT SC to M/S KSR Blue Metal Valiyattumugam, Chandam under Moolachel Section. 20)Improvement estimate for newly proposed 25KVA DT for improving Tailend voltage in Vilagam area under Thickanamcode Section. 21)Improvement estimate for newly proposed 25KVA DT for improving Tailend voltage in Kurangudivilai area under Thickanamcode Section, Kanyakumari Electricity Distribution Circle.

Details: 1) Construction of Beautification, Elctrification, Main Entry Gate at Chhatrapati Shiwaji Park in P.No.06 2) Construction of Concret road from Gajanan Way Bridge to APMC Market Gate in p no. 06 3) Construction of Cement Concrete Road from Shri Ajay Vishnu Patil to Shri Nitin Patil House at Dabki Village P No 08 4) Construction of Sabhagruh at Gurudutta Nagar,Shri Namdev Maharaj Mandir Open Space P No 08 5) Construction of Cement Concrete Road from Shri Wankhade to Open Space at Gokarna Park P No 08 6) Construction of Cement Concrete Road from Shri Bulbule House to Shri Shingne Sir House at Gokarna Park P No 08 7) Construction of Drain at Gokarna Plot Shri Bhiwate to Raghav Tale House P No. 08 8) Construction of Chain Link Compound Wall to Open Space near Paraskar School at Gurudutta Nagar P No.08 9) Construction of Drain at Laxmi Nagar Shri Ingle to Shri Ujjainkar to Canal P No. 08 10) Construction of Chain Link Compound Wall to Open Space near Mahakali Mandir at Asara Nagar P No.08 11) Construction of Drain at Gajanan Nagar Shri Galli No. 2 from Shri Parkhi to Shri Khandare House P No. 08 12) Construction of Cement Concrete Road from Shri Hanuman Mandir to Shri Anil Wankhade at Gajanan Nagar P No 08 13) Construction of Cement Concrete Road from Jain Kirana to Shri Jagdish Mankar at Gajanan Nagar P No 08 14) Construction of Cement Concrete Road from Shri Bahekar ti Shri Bhud, Shri Zhaparde to Shri Ubhe Sir & Shri Shinde to Shri Ujjwal Bade at Manorath Nagar P No 08 15) Construction of Cement Concrete Road from Shri Bhise to Shri Ingle House to Open Space at Awade Colony P No 08 16) Construction of Cement Concrete Road from Ashray Residency to Dabki Road to Hari Om Cement Shop to Shri Chipade at Ashray Nagar P No 08 17) Construction of Cement Concrete Road from Shri Ramdas Pohare to Canal Road at Raghuvir Nagar P No 08 39) Beautification Of Shri. Chatrapati Shivaji Maharaj Chowk At Shivar in P.No.13 40) 1) Construction of Concrete Service Line Beside Shri Vinod Taywale. 2) Construction of Concrete Road From From Shri Pravin Kalane to Shri Gawande. 3) Construction of Concrete Drain & Service Line From Shri Unkadrav Sonone to Shri Pravin Kalane. 4) Construction of Concrete Drain, Service Line & Culvert From Shri Manoj Bharde to Bhattad in Ara Mashion. 5) Construction of Concrete Drain & Road From Shri Prashant Sable to Shri Santosh Agrawal in Dwarka Nagari 6) Construction of Concrete Drain & Service Line From Shri Rameshwar Gond to Asara Chakki in Indian Gym 7) Construction of Concrete Service Line From Shri Gajanan Maharaj Mandir to Shri Ghonge in Mukund Nagar in P.No. 13 42) Construction of Walking Track & Beautification In Ravi Nagar Open Space at P.No.13 43) Construction of Sabhagruh In Open Space Front of Shri Navkar House At Gokul Colony In P. No. 13 44) Construction of Concrete Road At Sudhir Colony In P.No. 13 45) Beautification of Open Space Infront of Shri Lokhande House At Sudhir Colony In P.No.13 46) Development & Beautification of Road From National Highway 06 to Azad Chauk to Datta Nagar to Hanuman Mandir to Azad Chauk and Auto Stand to Shri Dhore and Shri Jayprakash Sabale to Shri Subhash More to Bhima Gawai and Shri Gajanan Maharaj Mandir to Shri Deshmukh in Shiwar In P.No. 13 47) Providing and Fixing Information Sign Board in Shashtri nagar Road & Gokul Colony Road at P.No. 13 48) 1) Construction of Concrete Road From Shri Chande to Shri Shegokar 2) Construction of Concrete Road From Shri Rathod to Shri Ladakhedkar to Shri Fulase to Shri Vike. 3) Construction of Concrete Drain & Culvert From Siddheshwar Ganpati Mandir 4) Construction of Concrete Road From Shri Desai to Shri Pali in P.No. 13 49) 1) Construction of Concrete Road Infront Of Shri Umale House in Mukund Nagar in P.No. 13 50) Construction of Public Toilet Block in Jawahar Nagar Chhatrapati Sambhaji Maharaj Park Shastri Nagar Hanuman Mandir Open Space at P.No. 13 51) Construction of Paving Block in Open Space in Ganpati Mandir in Shastri Nagar at P.No.13 53) Construction of Tar Road With WBM From Kailas Bhadake To Ganeh Jakate House At Malkapur In P No 14 54) Construction of Tar Road With WBM From Hivarale Major To Ganesh Sarnaik & Sheje To Wagh House At Malkapur In P No 14 55) Construction of Tar Road With WBM From Dilip Vagare To Damodare House At Malkapur In P No 14 56) Construction of CC Drain From Kothikar Duplex To Athavale To Ajay Nagpure Appartment Near Ashram At Malkapur In P No 14 57) Construction of Chainlink fencing Compound To Sarnath Bauddha Vihar Near Bhande Collage At Malkapur In P No 14 58) Construction of Sabhamandap Near Hanuman Mandir At PKV Colony Malkapur In P. No. 14 59) Construction of CC Road From Shri Santosh Wankhade To Amol Kale House At Malkapur In P No 14 60) Construction of Tar Road From Shri Gawande To Deshmukh House At Malkapur In P No 14 61) Construction of Sabhagruh Near Tuljaai Appartment Smashan bhumi Road Juni Wasti Malkapur In P No 14 62) Providing And Fixing Paving Blocks At Pola Location Junegaon Malkapur In P. No. 14 63) Construction of CC Road From MIDC Road To Barbi House At Malkapur In P No 14 64) Construction of Tar Road From Shri Dhenge House Yogiraj welding Work Shop To State Bank Colony At Malkapur In P No 14 65) Construction of CC Drain From Umak house To Sitara Tower Malkapur Road At Malkapur In p No 14 66) Construction of CC Drain From Abhang Appartment To Mangesh Wankhade House At Malkapur In p No 14 67) Construction of Tinshed At Gajanan Maharaj Mandir Malkapur In P. No. 14 68) Construction of CC Drain From Khatade To Deshmukh House At Malkapur In P No 14 69) Construction of CC Road From Shri Jayale To Dandale House At Malkapur In P No 14 70) Construction of Tar Road From Ajay Wankhade House Anil Wasnik To Nasir To Anand Buddha Vihar At Shivani In P No 14 71) Construction of Tar Road From Jaybhay House To Pachpor Blue Lotus School At Buddha prakash Colony Shivani In P No 14 72) Construction of CC Drain From Gautam Pachpor House To Jamil Bhai Kirana Shop At Jetvan Nagar Shivani In P No 14 73) Construction of Sabhamandap Near Devi Mandir At Ram Nagar Shivani In P. No. 14 74) Construction of Sabhamandap Infront Of Rajesh Wagare House At Basera Colony In P. No. 14 75) Construction of Chainlink fencing Compound To Surekha nagar Open Space At Malkapur In P No 14 92) Construction of Tar Road Back Side Of Khatu Shyam Mandir Hindu Smashan Bhumi To Main Road , In P.No. 17 124) Construction of CC Drain from Bhojane house to Wayatkar house at Mauli Nagar in P.No. 20 125) Construction of CC Drain from Balu Vairale house to Bhoyar house at Khadki in P.No. 20 126) Construction of Culvert infront of Bochare house at Santosh Nagar in P.No. 20 127) Construction of CC Road from Dangte Square to Yogesh Kuchar house at Z. P. Colony, Khadki in P.No.20 128) Construction of CC Road Mangrulpir Road to Ashutosh Chavhan house at Surya Garden Khadki in P.No.20 129) Construction of Tar Road From Pritam Deshmukh to Khanduji Walse house at Balaji Nagar in P.no. 20 130) Construction of CC Drain from Jadhav to Deshmukh house, Sandip Kharad to Gurav house at Khadki Gaothan and Construction of CC Road from Swami Samarth Kendra to Punde house at Sitaram Nagar Date Layout, Khadki in P.No.20 131) Construction of CC Road from Kakad house to Bhagat house and remaining portion infront of Swami Samarth Kendra Main Gate at Sant Nagar, Khadki in P.No.20 132) Construction of CC Road Jadhav house to Dandage house behind More Market Khadki in P.No.20 133) Construction of CC Drain from Wankhade house to Bopte house at Sant Nagar in P.No. 20 134) Construction of WBM Road from Nandkishor Rajaram Ingle house to Sopinath Maharaj Mandir to Ganesh Khatode house at Mhada Colony, Khadki in P.No.20 135) Construction of CC Road from Solid waste Management center to Vitthal Mahalle house at Khadki in P.No.20 136) Construction of Chainlink fencing, providing and fixing Pavers and Beautification at Sant Gadge Baba Open Space, Shivapur in P.no.20 137) Construction of CC Drain from Sane Guruji School to Someshwar Mandir at Santosh Nagar in P.No. 20 138) Construction of Walking track, Chainlink fencing at Someshwar Mandir Open Space, Santosh Nagar in P.no.20 139) Construction of Sabhagruh infront of Ramesh Raut, Sadanand Kakad, Pallavitai Joshi Open Space at Mhada Colony In P. No. 20 140) Construction of CC Road from Dilip Deshmukh house to Shiva Bhade house to Sant Gajanan Maharaj Provision at Kothari Watika 04 in P.No.20 141) Concreting in Service line from Sahyog apartment to Jadhav Tailor house near Ganpati Mandir at Giri Nagar in P.No. 20 142) Construction of CC Road Maharaj Vihar to Gajanan Apartment at Madhav Nagar in P.No.20 143) Construction of CC Drain from Manskar house to Kedia house at Yashwant Layout in P.No. 20