Bench Tenders

Details: P/f granite stone over the working benches in lab. no. 311 at Plant Molecular Biology, SDC, University of Delhi.

Details: P F Granite Stone Over The Working Benches In Lab. No. 311 At Plant Molecular Biology, Sdc, University Of Delhi

Details: Renovation Of Pond Deepening Of Pond Earth Filling Ramp Construction Of Tractor Slab Benches Construction Of Drain Construction Of Footslab And Retaining Wall

Details: Description:- Earthwork In Filling In Embankment, Guide Bunds, Around Buried Type Abutments, Bridge gaps, Trolley Refuges, Platforms Etc. With Contractor's Own Earth Conforming To Soil Quality Class sq1/sq2/sq3, After Preparation Of Foundations As Applicable, Benching In Existing Banks Wherever required, Spreading In Layers With Motor Grader, Bringing The Moisture Content To Omc, Mechanical compactiontospecifieddensity And Dressing Of Bank To Final Profile As Per Rdso Specifications: rdso/2020/ge:irs-0004withlatestcorrectionslips. Note:1)foundationpreparation,benching including Additional Earthwork On Account Of This, Wherever Required, Shall Be Paid Extra Under Relevant schedule Item For Benching. 2) Payment For Earthwork Under This Item Shall Be Made Based On The cross Section Measurements Calculated (i) With Original Ground Profile Of Existing Bank Based On Initial ground Levels Before Doing Benching And (ii) Final Profile Of The Bank Worked Out With Final Levels As Per prevailing Guidelines. Using Soil Class Sq3

Details: Description:- Earthwork In Filling In Embankment, Guide Bunds, Around Buried Type Abutments, Bridge gaps, Trolley Refuges, Platforms Etc. With Contractor's Own Earth Conforming To Soil Quality Class sq1/sq2/sq3, After Preparation Of Foundations As Applicable, Benching In Existing Banks Wherever required, Spreading In Layers With Motor Grader, Bringing The Moisture Content To Omc, Mechanical compactiontospecifieddensity And Dressing Of Bank To Final Profile As Per Rdso Specifications: rdso/2020/ge:irs-0004withlatestcorrectionslips. Note:1)foundationpreparation,benching including Additional Earthwork On Account Of This, Wherever Required, Shall Be Paid Extra Under Relevant schedule Item For Benching. 2) Payment For Earthwork Under This Item Shall Be Made Based On The cross Section Measurements Calculated (i) With Original Ground Profile Of Existing Bank Based On Initial ground Levels Before Doing Benching And (ii) Final Profile Of The Bank Worked Out With Final Levels As Per prevailing Guidelines. Using Soil Class Sq3

Description: Scrap Condemned Unserviceable Released Bridge Material Consisting Of T&p Items Like Bar Pinch -1 Nos, Bar Tommy -2 Nos, Buster Chisel - 2 Nos, Clamps Boiler - 1 Nos, Cotter Chisel- 3 Nos, D Shakle 2"- 8 Nos, D Shakle 4"- 3 Nos, Frames Hack Saw - 4 Nos, Hammer Hand Ball 2 Lbs - 1 Nos, Hammer Sledge 4 Lbs - 2 Nos, Hammer Sledge 6.61 Lbs - 2 Nos, Hammer Sledge 7 Lbs - 1 Nos, Hammer Sledge 14 Lbs- 1 Nos, Hand Saw 18? - 1 Nos, Jack Ratchet Handle - 2 Nos, Monkey Spanner - 1 Nos, Pn. Snap 20 Mm - 2 Nos, Sleeves Socket Mt 4-5- 1 Nos, Socket Handle - 1 Nos, Spanner Ring 30x32 - 6 Nos, Spanner 1(1/2)" - 5 Nos, Spanner De 11/8"x11/8" - 1 Nos, Spanner De 17x19 - 1 Nos, Spanner De 22x24 - 1 Nos, Spanner De 22x27 - 1 No, Spanner De 30x27 - 2 Nos, Spanner De 55x50 - 2 Nos, Tape 02 Mtr - 83 Nos, Tape 15 Mtr - 17 Nos, Tape 30 Mtr - 24 Nos, Tapet 5/8" Dia - 4 Nos, Tapet 7/8" Dia - 2 Nos, Wire Rope Clamps Off Sizes - 14 Nos, Auger 22 Mm- 1 Nos, Battery Charger - 2 Nos, Black Snatch Cordge - 2 Nos, Blower For Forge Portable - 1 No, C.p. 3094 N Grinder- 1 Nos, Carpentry Hand Drilling Machine - 2 Nos, Drilling Machine Duster Bench - 1 No, E.c. Socket Key - 3 Nos, Electric Drilling Machine - 3 Nos, Electric Grinding Machine - 2 Nos, Emergency Lightning Instrument With One Light 40 Volt Lighting - 2 Nos, Grease Gun - 2 Nos, Indare Mini Welder - 1 Nos, Jack Mechanical 15t Cap - 2 Nos, Jack Screw Lifting 20t Cap - 3 Nos, Jack Mechanical Duff 50t Cap - 1 No, Mechanical Jack 50t Cap- 5 Nos, Mechanical Jack 35t Cap- 1 Nos, Hyd. Jack 50t Cap - 2 Nos, Hyd. Jack 50t Cap Plain Ram- 6 Nos, Hyd. Jack 50t Cap Screwed Ram- 2 Nos, Hyd. Jack With Pump- 4 Nos, Kerc Cutting Machine- 1 Nos, Levelling Instrument With Box And Stand- 1 Nos, Levelling Staff 04 Mtr - 1 Nos, Magnifying Glass- 3 Nos, Metallic Light Brown Colour Cloth Tape- 1 Nos, Drill Sleeves 3-4 Mm- 1 Nos, One Second Microphic Theodolite Complete With Stand Lawrence & Mayo Make- 1 Nos, Pawmen Roller 50t Skidding Roller- 4 Nos, Puler Riet Buster- 1 Nos, Pulling & Lifting Machine- 2 Nos, Relief Valve For Cpt- 1 Nos, Rotary Drill Hammers Atlas Copco Make- 2 Nos, Rotary Drill Hammers Drill Bit-25mm- 1 Nos, Rotary Drill Hammers Drill Bit-38mm- 2 Nos, Single Phase A.c. Arc Welder- 1 Nos, Spirit Level- 1 Nos, Spring Balance- 3 Nos, Turn Buckle- 3 Nos, Ultrasonic Thickness- 1 Nos, Vhf Sets- 3 Nos, Pd 42 Laser Range Meter- 1 Nos, Hyd. Jack 15t Cap- 1 Nos, Weighing Machine(bharat Make) 500 Kg Capacity- 1 Nos, Public Address System- 1 Nos And Various Similar Types Of Items Of Sorts And Sizes In Broken, Damaged & Mixed Condition With Or Without Parts & Fittings And Nf, Stainless Steel Attachment, If Any. Total Approx. Qty. = 1.322 Mt.

Description: CATEGORY: DUPLEX SPROCKET 48 TEETH , DUPLEX SPROCKET 38 TEETH , DUPLEX SPROCKET 32 TEETH , DUPLEX SPROCKET 28 TEETH , DUPLEX SPROCKET 24 TEETH , DUPLEX SPROCKET 22 TEETH , DUPLEX SPROCKET 18 TEETH , SPROCKET 16 TEETH 60 MM BORE , SPROCKET 18 TEETH 60 MM BORE , SPROCKET 14 TEETH 60 MM BORE , SPROCKET BUSH TYPE 8 TEETH , SPROCKET 14 TEETH 65 MM BORE , SHAFT 60X750 MM , SHAFT 60X840 MM , SHAFT 40X380 MM , SHAFT 65X750 MM , DUPLEX CHAIN , COUNTER WEIGHT SET , TEFLON E PLATE , UHMWPE STRIP 1000X40X10 MM , UHMWPE STRIP 1000X50X5 MM , UHMWPE STRIP 2500 MM , STOPPER ROLLER DIA 60 MM , DOUBLE STOPPER PERPENDICULAR 50X80 MM , DOUBLE STOPPER PIVOT 50X80 MM , DRAG CHAIN 25X35XR50 , DRAG CHAIN 25X35XR40 , CONVEYOR GASKET RUBBER , RIVET PAIN CONVEYOR CHAIN , SINGLE LINK DUPLEX CHAIN , NTN 212 PLUMMER BEARING , CAROUSAL CENTRING ARM , FILLING SCALE ADJUSTMENT BOLT , FILLING SCALE BUSH , SKF BEARING 6304 2Z , INTRODUCTION LINEAR ROD , EJECTION LINEAR ROD , LINEAR BEARING DIA 30 MM LENTH 45 MM , GD PT CLAMPING ROLLER , GD PT CLAMPING PLATE , TENSION BLOCK D30 , GD PT CENTERING BUSH , GD PT SHAFT FOR GUIDANCE , BLOC FOR GUIDANCE , GD PT YOKE PLATE , GD LOWER BELL , HAND LEVER OPTED DETENT DS255HD61 , PNEUMATIC DRILLING MACHINE 12 MM , HSS DRILL BIT SET , HAMMERING DRILL BIT SET 16 MM , HAMMERING DRILL BIT SET 12 MM , HAMMERING DRILL BIT SET 6 MM , ELBOW CONNECTOR HALF INCH THREADED , T CONNECTOR HALF INCH THREADED , 1 INCH BARREL NIPPLE 300 MM , 40 MM THREADED SOCKET GI , TEE 40X25 MM THREADED GI , TEE 40X40 MM THREADED GI , NIPPLE 50MM THREADED GI , PIPE WRENCH 24 INCH , UNION 40 MM THREADED GI , HACKSAW BLADE 300 MM , PAINT REMOVER , HOT AIR SEALING CUP , HOT AIR SEALING HOSE , METAL JAW COUPLING L90 , METAL JAW COUPLING L100 , METAL JAW COUPLING L110 , METAL JAW COUPLING L150 , STAR BUSH COUPLING L110 , STAR BUSH COUPLING L100 , STAR BUSH COUPLING L150 , STAR BUSH COUPLING L90 , ALLEN BOLT M6X30 MM , ALLEN BOLT M8X40 MM , ANCHOR BOLT 16X100 , ANCHOR BOLT 12X100 , STUD M12X100 MM , STUD M16X100 MM , HEXAGONAL BOLT M10X40 MM , HEXAGONAL BOLT M8X40 MM , HEXAGONAL BOLT M8X75 MM , HEXAGONAL BOLT M10X150 MM , HEXAGONAL BOLT M8X150 MM , HEAD BOLT HALF THREADED M16X75 MM , CSK ALLEN HEAD M6X20 MM , CSK ALLEN HEAD M8X20 MM , LOCK NUT M6 , LOCK NUT M8 , LOCK NUT M10 , HEX NUT M10 , WASHER M10 , BALL VALVE 2 INCH CLASS 150 , BALL VALVE 1 INCH CLASS 150 , BALL VALVE 3 BY 4 INCH CLASS 150 , BALL VALVE HALF INCH CLASS 150 , BENCH VICE HEAVY DUTY , CABLE TIE 150X3 MM , CABLE TIE 200X3 MM , CABLE TIE 250X3 MM , CABLE TIE 300X3 MM , WD 40 SPRAY , LOCTITE 542 50 ML , ELECTRO SPRAY

Details: Description:- Earthwork In Filling In Embankment, Guide Bunds, Around Buried Type Abutments, Bridge gaps, Trolley Refuges, Platforms Etc. With Contractor's Own Earth Conforming To Soil Quality Class sq1/sq2/sq3, After Preparation Of Foundations As Applicable, Benching In Existing Banks Wherever required, Spreading In Layers With Motor Grader, Bringing The Moisture Content To Omc, Mechanical compactiontospecifieddensity And Dressing Of Bank To Final Profile As Per Rdso Specifications: rdso/2020/ge:irs-0004withlatestcorrectionslips. Note:1)foundationpreparation,benching including Additional Earthwork On Account Of This, Wherever Required, Shall Be Paid Extra Under Relevant schedule Item For Benching. 2) Payment For Earthwork Under This Item Shall Be Made Based On The cross Section Measurements Calculated (i) With Original Ground Profile Of Existing Bank Based On Initial ground Levels Before Doing Benching And (ii) Final Profile Of The Bank Worked Out With Final Levels As Per prevailing Guidelines. Using Soil Class Sq2

Details: The Supply And Installation Of Zoom Licenses At The Bombay High Court And Its Benches At Nagpur And Aurangabad And The High Court Of Bombay At Goa

Details: Annual Maintenance Contract (amc) Of Ups Installed In The High Court Of Karnataka, Bengaluru, Benches At Dharwad & Kalaburagi And In The District And Taluka Courts In The State Of Karnataka