Lower Dibang Valley Tenders

CATEGORY: P.F. Huts with PUF Panel (MHA) , Prefab Hut / House of Size 6.10 M X 7.32 M (as per GeM Drawing) , Prefab Hut / House of Size 4.88 M X 9.76 M (as per GeM Drawing) , Two Seater modular toilet with each cubicle of size 1830 mm x 1220 mm x 2050 mm with ICT , Two Seater modular toilet with each cubicle of size 1220 cm x 915 mm x 1980 mm with ICT

CATEGORY: MS shuttering plate of size 1.2Mtr x 1.2Mtr made with 3.15 mm thick MS sheet with angle iron of size 50x50x 6mm having properly welded, uniform finish Weight not less than 67.97 Kgs as per Drg1 , MS shuttering plate of size 1Mtr x 1Mtr made with 3.15 mm thick MS sheet with angle iron of size 50x50x 6mm having properly welded, uniform finish Weight not less than 51.70 Kgs as per Drg2 , MS shuttering plate of size 1 Mtr x 0.60 Mtr made with 3.15 mm thick MS sheet with angle iron of size 50x50x 6mm having properly welded, uniform finish Weight not less than 31.92 Kgs as per Drg No 3 , MS shuttering plate of size 1 Mtr x 0.40 Mtr made with 3.15 mm thick MS sheet with angle iron of size 50x50x 6mm having properly welded, uniform finish Weight not less than 24.28 Kgs as per Drg No 4 , MS shuttering plate of size 1 Mtr x 0.30 Mtr made with 3.15 mm thick MS sheet with angle iron of size 50x50x 6mm having properly welded, uniform finish Weight not less than 20.46 Kgs as per Drg 5 , MS shuttering plate of size 1 Mtr x 0.20 Mtr made with 3.15 mm thick MS sheet with angle iron of size 50x50x 6mm having properly welded, uniform finish Weight not less than 16.64 Kgs as per Drg 6 , MS Pipe 6.00 Mtr long of NB 40 Heavy ISI Mark with OD 48.3 mm having shell thickness 4.00 mm for structural purpose, Weight 4.37 Kg per mtr, Total weight 26.22 Kg per unit. , Adjustable Base Plate screw length of 400mm with captive nut OD 80 mm and ID 36 mm and Ht 50 mm welded to 300x300mm, 8mm thick plate to allow adjustment of bottom or top of scaffolding as per Drg 7 , Right Angular Coupler 40 NB medium MS pipe forge type on galvanised finish confirming to BIS 1139and should bear main slip load of 12.5 KN and distortionload of 30.00 KN approximate weight 750 gms. , Swivel coupler 40 NB medium MS pipe forge type on galvanised finish confirming to BIS 1139 , MS Bolt and Nut with double washer for shuttering plate 12 mm dia 50 mm long fully threaded, Grade 8.8.

CATEGORY: Toner Cartridges / Ink Cartridges / Consumables for Printers (Q2) ( PAC Only )

Total Station

CATEGORY: Carbide Chain Saw (Q3)

Construction Of Three Exploratory Drifts For Geological Investigation Of Attunli Hep

CATEGORY: Household Refrigerating Appliances as per IS 17550 (Q2)

Provision Of 02 X Fd Water Supply Scheme

E-auction Notice For Disposal Of Unserviceable Gunnies Lying Under Fci Fsd Anini

CATEGORY: SET SCREW LH SIDE END PLATE JESSOP PART NO. JAT 79030 , END PLATE LH JESSOP PART NO. JAT 79027A , FINAL DRIVE PINION LH JESSOP PART NO. JAT 79021A , KEY FOR FINAL DRIVE PINION JESSOP PART NO. JAQ 78011-6 , OIL SEAL JESSOP PART NO. JAT 79235 , BUSH JESSOP PART NO. JAQ 79022 , GRUB SCREW JESSOP PART NO. JAT 79036 , GRUB SCREW JESSOP PART NO. JAT 79035 , BRG HOUSING LH JESSOP PART NO. JAH 79018 , BUSH JESSOP PART NO. JAQ 79019 , SLEEVE JESSOP PART NO. JAQ 79020 , BOLT FOR GEAR RING WITH SLOTTED NUT AND SPLIT PIN JESSOP PART NO. JAT 79016A , DRIVE RING JESSOP PART NO. JAF 79148C , FITTINF BOLT M16X2 JESSOP PART NO. JAT 79269E-1 , SET OF BRAKE LINING JESSOP PART NO. JAQ 89166A , BUSH FOR REAR ROLLER JESSOP PART NO. JAQ 89422 , BRASS GRAB SCREW JESSOP PART NO. JAT 79035A , HIND AXLE CAP JESSOP PART NO. JAQ 79163A , PIN FOR AXLE CAP JESSOP PART NO. JAQ 79164A , FLET RING JESSOP PART NO. JAT 79166A , NUT NYLOC M 16X2 , FILTER ELEMENT PART NO. 03.040.19.0