Tenders of Bharat Dynamics Limited

CATEGORY: ESD WORKSTATION , ESD PERSONNEL STATIC TESTER

CATEGORY: ESD MATS , ESD TOTE BINS NO PARTITION , ESD TOTE BINS SINGLE PARTITION , ESD ADJUSTABLE PCB CARRIERS , ESD SAFE SLIPPERS

CATEGORY: Repair and Overhauling Service - Power Press; Testing of Presses at BDL Bhanur; Yes; Buyer Premises

CATEGORY: HSS M42/PMF P/S END MILL WITH TIALCN/TIALN COATING IS: 6353 DIA 3.0 , HSS M42 OR PMF P/S TIALCN/TIALN COATED ROUGH END MILL WITHOUT CENTRE CUTTING DIA 12X FL 26 X OAL 83 , HSS METAL SLITTING SAW IS: 5031 DIA 63 X 1.55 X 22– 100T , HSS SIDE & FACE CUTTER IS: 6308, TYPE A & H (STAGGERED TEETH) DIA 100 X 10 X BORE 32 , HSS M42 P/S SLOT DRILL WITH TIALN COATING IS: 6352 DIA 4 X FL 7 X OAL 51 X Sh. DIA 6mm , SOLID CARBIDE P/S END MILL WITH TIALN COATING Gr: MICROFINE 4 FLUTES DIA 4 X FL 12/14 X OAL 50 , SOLID CARBIDE P/S END MILL WITH TIALN COATING Gr: MICROFINE 4 FLUTES DIA 5 X FL 15/16 X OAL 50 , SOLID CARBIDE P/S END MILL WITH TIALN COATING Gr: MICROFINE 4 FLUTES DIA 6 X FL 20 X OAL 57 , SOLID CARBIDE P/S END MILL WITH TIALN COATING Gr: MICROFINE 4 FLUTES DIA 10 X FL 22 X OAL 72/75 , SOLID CARBIDE P/S END MILL WITH TIALN COATING Gr: MICROFINE 4 FLUTES DIA 12 X FL 25/30 X OAL 75/83 , SOLID CARBIDE P/S SLOT DRILL WITH TIALN COATING Gr: MICROFINE IS: 6352 DIA 3.00 X FL 15 X OAL 50 X Sh. , SOLID CARBIDE P/S SLOT DRILL WITH TIALN COATING Gr: MICROFINE IS: 6352 DIA 6.00 X FL 16 X OAL 50 X Sh. , SOLID CARBIDE P/S SLOT DRILL WITH TIALN COATING Gr: MICROFINE IS: 6352 DIA 16 X FL 18/30 X OAL 70/89 X , SOLID CARBIDE HIGH HELIX END MILL WITH TIALN COATING Gr: MICROFINE DIA 8.00 X FL 19/21 X OAL 63mm– 4 , SOLID CARBIDE HIGH HELIX END MILL WITH TIALN COATING Gr: MICROFINE DIA 8.00 X FL 19 X OAL 63mm– 8 FL

CATEGORY: Embedded Nano AI Board , AI computing SOM

CATEGORY: TB42CT0070/a HSS M42 SPL. MILLING CUTTER WITH MT2 SHANK DIA 26.05mm, FL 25mm, OAL 250mm. , TB42CT0083/a HSS SPOT FACING TOOL Gr: M42 DIA 3mm, FL 6mm, OAL 800mm. , GROOVING TOOL Drwg. No: TB42CT1037 , HSS M42 SPECIAL T SLOT CUTTER Drwg. No: TB42CT0061 , BT-535 CARBIDE LUGGED TAPER MILLING CUTTER Drwg. No: TB49CT0060 Gr: MICROFINE DIA 25mmX34 DEGREES(INCL , DRILL 2.2 Drwg. No: TA42CT1610/1 , DRILL 3.4 Drwg. No: TA42CT1610/2 , DRILL 3.8 Drwg. No: TA42CT1610/3 , C-DRILL & DRILL D: 3 Drwg. No: TA42CT1610/4 , DRILL 3.2 Drwg. No: TA42CT1610/5 , TB42CT1247 90 DEGREE GROOVE TOOL , TA42CT1008/a HSS TICN COATED COUNTER BORING TOOL Gr: M42 DIA 3.75mm, FL 3mm, OAL 50mm. , T SLOT CUTTER Drwg. No: TB42CT1787 , CSK TOOL DIA - 4.9mm Drwg. No: TA49CT0215

CATEGORY: Loctite 242( Qty: 50ml, Make: Henkel , Loctite 270( Qty: 50ml, Make: Henkel

CATEGORY: Strain Gauge for steel MDN 250 PRE WIRED

CATEGORY: 9M1190107039E S/F TO BE EP

CATEGORY: HSS M42 TIALN COATED P/S M/C CHUCKING REAMER TOLERANCE m6 AS PER IS: 5446 DIA: 2.10mm(m6) , HSS M42 TIALN COATED P/S M/C CHUCKING REAMER TOLERANCE m6 AS PER IS: 5446 DIA: 3.30mm(m6) , HSS M42 TIALN COATED P/S M/C CHUCKING REAMER TOLERANCE m6 AS PER IS: 5446 DIA: 3.40mm(m6) , HSS M42 TIALN COATED P/S M/C CHUCKING REAMER TOLERANCE m6 AS PER IS: 5446 DIA: 3.50mm(m6) , HSS M42 TIALN COATED P/S M/C CHUCKING REAMER TOLERANCE m6 AS PER IS: 5446 DIA: 4.00mm(m6) , HSS M42 TIALN COATED P/S M/C CHUCKING REAMER TOLERANCE m6 AS PER IS: 5446 DIA: 4.10mm(m6) , SOLID CARBIDE P/S M/C REAMER TO PRODUCE H7 HOLE Gr: MICRO GRAIN WITH TIALN COATING DIA1.6mm, FL35mm, , SOLID CARBIDE NICROFINE M/C CHUCKING REAMER TO PRODUCE H7 HOLE Gr: MICRO GRAIN WITH TIALN COATING DI , CARBIDE LUGGED REAMER DIA 13.94 (+ 0.007/+ 0.018) MM, FLUTE LENGTH 50MM, OVERALL LENGTH 110MM AND SHANK , MICRFINE GRADE SOLID CARBIDE REAMER DIA 14MM (+ 0.007/+ 0.018) X FL 40MM X OAL 85MM X SHANK DIA 14H6 6