Municipal Corporation Tender

Construction of retaining wall and storm water drain;Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202 MORD & 1100, 1600 MORTH for Bars below 36 mm dia including over laps and wastage, where they are not welded.Reinforcement steel(HYSD/TMT) from steel manufacturers like TATA, SAIL, VSP, JSW, SHYAM STEEL, GOEL TMT, V-XEGA, JINDAL PANTHER, BALAGI SHAKTI, AF STAR, TMT/MS LIFE TMT, RADHA TMT AND SUGUNA TMT

Construction of retaining wall and storm water drain;Supply and placing of RCC grade M 30 ,using 20 mm Graded Metal (MORD & MORTH 12.8 E) as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard mix design as per IS-10262:1982, with coarse aggregate of nominal size 20mm 54%, 10mm 18%, 6mm 18% as per the mix design approved by the Department from Standard suppliers including cost and conveyance, vertical pumping and Horizontal pumping on all materials, etc., works for basic cost including leveling, grading, spreading, dewatering , curing for 14 days, centring, vibrating, compacting, finishing etc., as required including, material taxes, pumping, transportation, approved admixture etc., complete. .(RCC-M30) : With Concrete Mixer (RCC M 30) Design Mix Note: 1.. Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 shall be used. 2. The quantities for cement, coarse aggregates and fine aggregates are for estimating purpose only. The exact quantities will be as per mix design. TOP SLAB

Construction of retaining wall and storm water drain;Supply and placing of RCC grade M 30 ,using 20 mm Graded Metal (MORD & MORTH 12.8 E) as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard mix design as per IS-10262:1982, with coarse aggregate of nominal size 20mm 54%, 10mm 18%, 6mm 18% as per the mix design approved by the Department from Standard suppliers including cost and conveyance, vertical pumping and Horizontal pumping on all materials, etc., works for basic cost including leveling, grading, spreading, dewatering , curing for 14 days, centring, vibrating, compacting, finishing etc., as required including, material taxes, pumping, transportation, approved admixture etc., complete. .(RCC-M30) : With Concrete Mixer (RCC M 30) Design Mix Note: 1.. Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 shall be used. 2. The quantities for cement, coarse aggregates and fine aggregates are for estimating purpose only. The exact quantities will be as per mix design. WALLS

Construction of retaining wall and storm water drain;Supply and placing of RCC grade M 30 ,using 20 mm Graded Metal (MORD & MORTH 12.8 E) as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard mix design as per IS-10262:1982, with coarse aggregate of nominal size 20mm 54%, 10mm 18%, 6mm 18% as per the mix design approved by the Department from Standard suppliers including cost and conveyance, vertical pumping and Horizontal pumping on all materials, etc., works for basic cost including leveling, grading, spreading, dewatering , curing for 14 days, centring, vibrating, compacting, finishing etc., as required including, material taxes, pumping, transportation, approved admixture etc., complete. .(RCC-M30) : With Concrete Mixer (RCC M 30) Design Mix Note: 1.. Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 shall be used. 2. The quantities for cement, coarse aggregates and fine aggregates are for estimating purpose only. The exact quantities will be as per mix design. RAFT

Construction of retaining wall and storm water drain;Supply and placing of the Ready Mix Concrete (RMC) M15 grade Standard Design Mix Concretegrade as per IS4926- 2003 with minimum cement content as per IScode456- 2000 using 20mm graded metal, from standard suppliers approved by the department including pumping, laying concrete, vibrating / screed / pan vibrating, curing etc. complete but excluding cost of steel and its fabrication charges, centering, shuttering for finished item of work. - with concrete mixer Note: 1.. Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 shall be used. 2. The quantities for cement, coarse aggregates and fine aggregates are for estimating purpose only. The exact quantities will be as per mix design.

Construction of retaining wall and storm water drain;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH.

Construction of retaining wall and storm water drain;Cutting sheet rock including stocking of excavated material including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work.

Construction of retaining wall and storm water drain;Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308). Ordinary soils-Mechcanical Means-Upto 3 m depth

Construction of retaining wall and storm water drain;Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately as per Technical Specification Clause 202 MORD / MORTH By Mechanical Means Bituminous Courses

Construction of retaining wall and storm water drain;Engaging Dewatering pump 10 hp ( diesel ) including labour, fuel and all charges

Construction of retaining wall and storm water drain;Carting away the surplus excavated earth from the work site with a lead of 05 Km beyond initial lead including loading, unloading and conveyance but excluding stacking charges, etc., complete

Construction of retaining wall and storm water drain;Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Construction of retaining wall and storm water drain;Carting of desilted dry silt with Manually loading, transportation, weighment, unloading by including making and dumping at dump site lead of about 25 kms including wighment with weighting slip from dumping yard including cost and conveyance of all materials and all labour charges but excluding contractor profit and over head charges etc, compete for finished item of work as directed by the GHMC officers

Construction of retaining wall and storm water drain;Removal of unsuitable / Unserviceable soil /silt including excavation, loading and disposal upto 1000 m lead but excluding compaction ground supporting embankment subgrade replacement by suitable soil, which shall be paid separately as per Clause 303.5.2 as per Technical Specification Clause 302.3.11 MORD / 301 MORTH by mechanical means.

Construction of retaining wall and storm water drain;Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in TG excluding Taxes. for weep holes (6 kg/cm2)

Construction of retaining wall and storm water drain;Hot dipped Galvanized Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979 - PVC Coated - 2"x2" (50 mm x 50 mm) - 8 Gauge

Construction of retaining wall and storm water drain;Supply ,delivery and fixing of G.I Nuts, Bolts and Washers each set etc for complete item of work (TBSC-D.VI-15)TBSC-D.VI-17

Construction of retaining wall and storm water drain;TBSP-G.I-12 S & F 50 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete 1 RM 506.00

Construction of retaining wall and storm water drain;Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202 MORD & 1100, 1600 MORTH for Bars below 36 mm dia including over laps and wastage, where they are not welded.Reinforcement steel(HYSD/TMT) from steel manufacturers like TATA, SAIL, VSP, JSW, SHYAM STEEL, GOEL TMT, V-XEGA, JINDAL PANTHER, BALAGI SHAKTI, AF STAR, TMT/MS LIFE TMT, RADHA TMT AND SUGUNA TMT

Construction of retaining wall and storm water drain;Supply and placing of RCC grade M 30 ,using 20 mm Graded Metal (MORD & MORTH 12.8 E) as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard mix design as per IS-10262:1982, with coarse aggregate of nominal size 20mm 54%, 10mm 18%, 6mm 18% as per the mix design approved by the Department from Standard suppliers including cost and conveyance, vertical pumping and Horizontal pumping on all materials, etc., works for basic cost including leveling, grading, spreading, dewatering , curing for 14 days, centring, vibrating, compacting, finishing etc., as required including, material taxes, pumping, transportation, approved admixture etc., complete. .(RCC-M30) : With Concrete Mixer (RCC M 30) Design Mix Note: 1.. Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 shall be used. 2. The quantities for cement, coarse aggregates and fine aggregates are for estimating purpose only. The exact quantities will be as per mix design. Walls

Construction of retaining wall and storm water drain;Supply and placing of RCC grade M 30 ,using 20 mm Graded Metal (MORD & MORTH 12.8 E) as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard mix design as per IS-10262:1982, with coarse aggregate of nominal size 20mm 54%, 10mm 18%, 6mm 18% as per the mix design approved by the Department from Standard suppliers including cost and conveyance, vertical pumping and Horizontal pumping on all materials, etc., works for basic cost including leveling, grading, spreading, dewatering , curing for 14 days, centring, vibrating, compacting, finishing etc., as required including, material taxes, pumping, transportation, approved admixture etc., complete. .(RCC-M30) : With Concrete Mixer (RCC M 30) Design Mix Note: 1.. Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 shall be used. 2. The quantities for cement, coarse aggregates and fine aggregates are for estimating purpose only. The exact quantities will be as per mix design. RAft

Construction of retaining wall and storm water drain;Supply and placing of the Ready Mix Concrete (RMC) M15 grade Standard Design Mix Concretegrade as per IS4926- 2003 with minimum cement content as per IScode456- 2000 using 20mm graded metal, from standard suppliers approved by the department including pumping, laying concrete, vibrating / screed / pan vibrating, curing etc. complete but excluding cost of steel and its fabrication charges, centering, shuttering for finished item of work. - with concrete mixer Note: 1.. Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 shall be used. 2. The quantities for cement, coarse aggregates and fine aggregates are for estimating purpose only. The exact quantities will be as per mix design.

Construction of retaining wall and storm water drain;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH.

Construction of retaining wall and storm water drain;Cutting sheet rock including stocking of excavated material including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work.

Construction of retaining wall and storm water drain;Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308). Ordinary soils-Mechcanical Means-Upto 3 m depth