Mission Bhagiratha Department Tender

NA;Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846- 2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept.. Two coats of primer suitable for EPOXY PAINTS finish shall be applied to all metal surface and finally two coats of Epoxy Paint. The Valves shall be tested for (closed end Test) against Hydrostatic test requirement. The operation can be done with hand wheel/cap. ISI Marked.,dismantling joint to suit the pressure class of pipe, etc.complete for finished item of work The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of work, but excluding GST 200mm on 200mm HDPE line

NA;Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846- 2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept.. Two coats of primer suitable for EPOXY PAINTS finish shall be applied to all metal surface and finally two coats of Epoxy Paint. The Valves shall be tested for (closed end Test) against Hydrostatic test requirement. The operation can be done with hand wheel/cap. ISI Marked.,dismantling joint to suit the pressure class of pipe, etc.complete for finished item of work The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of work, but excluding GST 150mm on 140 mm HDPE line

NA;Supply, delivery, laying and Jointing of and CI/DI D/F Kinetic DI air valve (PN-16) as per IS:14845 Heavy Duty with isolating valve bevel gear operated as per IS 14846 on pipe line including supply of Air valve ,CI Specials to suit the pressure class of pipe and construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work but excluding GST.. 50mm on 90mm HDPE pipe line

NA;Supply, delivery, laying and Jointing of and CI/DI D/F Kinetic DI air valve (PN-16) as per IS:14845 Heavy Duty with isolating valve bevel gear operated as per IS 14846 on pipe line including supply of Air valve ,CI Specials to suit the pressure class of pipe and construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work but excluding GST. 50mm on 75mm HDPE pipe line

NA;Supply, delivery, laying and Jointing of and CI/DI D/F Kinetic DI air valve (PN-16) as per IS:14845 Heavy Duty with isolating valve bevel gear operated as per IS 14846 on pipe line including supply of Air valve ,CI Specials to suit the pressure class of pipe and construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work but excluding GST. 50mm on 110mm HDPE pipe line

NA;Manufacture, supply and delivery of Single Chamber DI Air Valve (PN 16)with Body and cover in Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per requirement of the dept pipe line including supply of Air valve ,CI Specials to suit the pressure class of pipe and construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work but excluding GST . 50mm on 200mm HDPE pipe line

NA;Manufacture, supply and delivery of Single Chamber DI Air Valve (PN 16)with Body and cover in Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per requirement of the dept pipe line including supply of Air valve ,CI Specials to suit the pressure class of pipe and construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work but excluding GST . 50mm on 140mm HDPE pipe line

NA;Construction of pipe line for water supply with HDPE pipes (PE 100) as per IS:4984/2016,with its amendments and revisons thereon including supplying of pipes, specials as per requirements, lowering, laying and jointing of pipe lines true to alighnment and gradient, trench excavtion for pipe lines in all soils except Rock requiring blasting and refilling trenches with excavated earth(other than rocky soil and boulders) with watering, tamping and removeing surplus earth from site of work and filling pipe line with water and testing etc., complete. The rates are inclusive of cost & conveyance of all materials and labour charges for finished item of pipe line work., Complete and Excluding GST 90mm dia 6kg/cm2 HDPE Pipeline

NA;Construction of pipe line for water supply with HDPE pipes (PE 100) in as per IS:4984/2016,with its amendments and revisons thereon including lowering, laying and jointing of pipe lines true to alighnment and gradient, trench excavtion for pipe lines in Laterite Soils except Rock requiring blasting and refilling trenches with excavated earth(other than rocky soil and boulders) with watering, tamping and removeing surplus earth from site of work and filling pipe line with water and testing etc., complete. The rates are inclusive of cost & conveyance of all materials and labour charges for finished item of pipe line work., Complete and Excluding GST. 90mm dia 6kg/cm2 HDPE Pipeline

NA;Construction of pipe line for water supply with HDPE pipes (PE 100) in as per IS:4984/2016,with its amendments and revisons thereon including lowering, laying and jointing of pipe lines true to alighnment and gradient, trench excavtion for pipe lines in Laterite Soils except Rock requiring blasting and refilling trenches with excavated earth(other than rocky soil and boulders) with watering, tamping and removeing surplus earth from site of work and filling pipe line with water and testing etc., complete. The rates are inclusive of cost & conveyance of all materials and labour charges for finished item of pipe line work., Complete and Excluding GST 75mm dia 6kg/cm2 HDPE Pipeline

NA;Construction of pipe line for water supply with HDPE pipes (PE 100) as per IS:4984/2016,with its amendments and revisons thereon including supplying of pipes, specials as per requirements, lowering, laying and jointing of pipe lines true to alighnment and gradient, trench excavtion for pipe lines in all soils except Rock requiring blasting and refilling trenches with excavated earth(other than rocky soil and boulders) with watering, tamping and removeing surplus earth from site of work and filling pipe line with water and testing etc., complete. The rates are inclusive of cost & conveyance of all materials and labour charges for finished item of pipe line work., Complete and Excluding GST 110mm dia 6kg/cm2 HDPE Pipeline

NA;Construction of pipe line for water supply with HDPE pipes (PE 100) as per IS:4984/2016,with its amendments and revisons thereon including supplying of pipes, specials as per requirements, lowering, laying and jointing of pipe lines true to alighnment and gradient, trench excavtion for pipe lines in all soils except Rock requiring blasting and refilling trenches with excavated earth(other than rocky soil and boulders) with watering, tamping and removeing surplus earth from site of work and filling pipe line with water and testing etc., complete. The rates are inclusive of cost & conveyance of all materials and labour charges for finished item of pipe line work., Complete and Excluding GST. 200mm dia 6kg/cm2 HDPE Pipeline

NA;Pipeline Repairs & Renewals Construction of pipe line for water supply with HDPE pipes (PE 100) as per IS:4984/2016,with its amendments and revisons thereon including supplying of pipes, specials as per requirements, lowering, laying and jointing of pipe lines true to alighnment and gradient, trench excavtion for pipe lines in all soils except Rock requiring blasting and refilling trenches with excavated earth(other than rocky soil and boulders) with watering, tamping and removeing surplus earth from site of work and filling pipe line with water and testing etc., complete. The rates are inclusive of cost & conveyance of all materials and labour charges for finished item of pipe line work., Complete and Excluding GST 140mm dia 6kg/cm2 HDPE Pipeline