Kerala State Film Development Corporation Limited Tender

Supplying and fixing Sofa type Push back auditorium Chairs of size (overall in normal position) 700mm wide from the centerlines of arm rests, 600mm width from front to back, 1000mm or above height on back side with the following specifications. Side stands: 700 x 4500mm or nearest size Made up of and 75 x 40mm rectangular – 16swg / 100 x 25mm – 18swg C.R sq. tube and 25 x 6mm M.S flat to meet the structural requirements and both sides covered with either 22 swg C.R sheets or Elastic belts 6mm thick upholstered board with cup holder. Every end row of legs should be completely covered with the fabric upholstery boards. All the metal parts to be painted in two coats of enamel paint after priming coat or powder coated. Seats: 600/530x550 mm or nearest size Seat frames fabricated and made to shape with 25 x 25mm – 18 swg / 18 x 18mm- 16swg C.R sq. tubes and stripped with elastic belts and coil spring in suitable spacing and upholstered with PU foam of average 4"-4.5" thick density of 40-45 kg/m frames and 15mm thick U foam and Recon fibre made to sheet over it made to shape and finally covered with foam backed scotch guard treated 3mm thick velvet laminated fabric of approved quality and colour (in horizontal seats and vertical sides of foot rest). (Mechanism 2:Roller and box type made fabricated with 3mm thick flats, 1"sq.pipe 2 stays provided with 2 springs and lacquer painted and pushback mechanism with hydrolic gas spring Backrests: 850 x 600/560 mm or nearest size Backrests frames fabricated and made to shape with 35 x 35mm – 25 swg/25 x 18mm- 16swg C.R sq. tubes and covered inner portion with elastic belt in suitable spacing and shape and upholstered with recon fibre over it made to shape in bucket type or 3 layer pillow type and finally covered with foam backed and scotch guard treated velvet laminated 3m thick fabric of approved quality and colour. Rear side of the backrest covered. The backrests should have head rest and lumbered supports. Arm rests: 125 mm width and fully covered with U foam and recon fibre/U foam over it made to shape and finally covered with foam backed and scotch guard treated velvet laminated 3m thick fabric of approved quality and colour with cupholoder. Foundation Bolt: 90*8mm full threaded bolt with chemical bonding work 2nos. each per leg, Centre to centre from 57/70cm minimum height of chair is 950mm or above. complete