Temple Trust Shri Naina Devi Ji Tender

Steel work welded in built up sections, trusses and framed work, i/c cutting, hoisting , fixing in position and applying a priming coat of red lead paint within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. (a) In grating, framed guard bars, ladders, railing, brackets and similar work.

P/f PVC water storage tank of ISI: 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement i/c hoisting upto all heights above ground level within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. (i) 2000 liters capacity tank. ( ( Sintex Double layer ISI make) )

P/f to wall ceiling and floor galvanised mild steel tube (medium grade) tube fittings and clamps i/c making good the wall, ceiling and floors within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. (a) 20mm nominal bore (Jindal B class ISI make )

© 40 mm nominal bore within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. Jindal B class ISI make )

P/ fixing on wall face PVC rain water, waste and ventilating pipes ( ISI make of approved make) of working pressure not less than 4.0 kg/ cm i/c filling the joints with approved adhesive complete within all leads and lifts as per direction and best satisfaction of Engineer-in- charge. (a) 110 mm dia pipes finolex ISI make )

Painting two coats (without) e/ c priming coat ) on new steel and other metal surfaces with enamel paint to give wn even shade i/c cleaning the surface of dirt, dust and other foreign matter: within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. (a) With enamel paint other than white. a) Asian paint 1st quality )

Supplying and fixing 5HP horizontal spindle , horizontal /radial split casing /end suction (black pullout arrangement )single/double /multi stage of platt /KSB/Beacon Weir / BE /kirloskar /jyoti as per BIs Is 1520-1980 with upto date amendments read with IS 9137-1978 or latest edition suitable for lifting water for under mentioned charactteristic with Bronze impeller /priming funnels, casing ring and shaft sleeved of bronze shaft of stainless steel with cast iron casing ,coupled directly through a flexible coupling on a common castiron /cast steel base plate (base plate (base plate to be framed from the nuable manufacture of the pumping unit only ) to spriling /squirrel ) cage screen protected drip proof induction motors /motors of standard make such as Crompton /NGEF /GEC/ semiman / Kirlosker/BHEL/ABBand suitable for operation on 415 (+-15% ) volts 50 cycles /Sec. 3 phase AC electric supply of 2900 rpm . tHE POWERS OF ELECTRIC MOTORS SHOULD BE ATLEAST +10 % in excess of the maximum powers required by the pump/ pumps in the operation range of (+10%) and (-15 % ) of the duty point head. The motors as per IS 325 IS 1978 with upto date amendments read with IS 900 1972 it should i/c cost of bearing . Nuts bolts and painting etc. should the requirement , complete in all respect within all leads and leads as per direction and satisfection of Engineer-in charge .

Repairs to plaster in patches of 2.50 sqms and under and 10 to 15 mm thick i/c cutting the patch in proper shape and replastering the surface of the wall i/c disposal of rubbish to the dumping ground within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. (a) Cement mortar 1:5 (1 cement: 5 sand)

P/F bass full way valve with wheel within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. (a) 20 mm nominal bore Nova heavy ISI make.

© 40 mm nominal bore within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. (a) 40 mm nominal bore Nova heavy ISI make.

P/F terra cota tiles of specified size and make in cement mortar 1:3 ( 1 cement: 3 sand) including curing complete. within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. Tiles 1st quality

Finishing wall with weather proof exterior grade emulsion of approved design ( Apex ultima ) or its equarlied on undecorated wall surfaces ( two coats ) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc. i/c sand papering smooth complete within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge (a) Asian Paint

Removing dry or oil bound distemper by washing and sand papering the wall surface smooth i/c necessary repairs to scratches complete within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge.

Wall painting ( two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on decorated concrete/ stone/ plastered wall surface to give an even shade i/c thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth i/c applying for metling the surface within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. (a) Asian paint

Removing old paint or polish from wood and wood based surfaces with paint remover of approved brands and manufacture and making the surface even with within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. (a) Paint remover of approved brand and manufacture.

Applying spirit or oil stain( any colour) on wood and wood based surfaces to give an even surfaces i/c cleaning the surfaces of all dirt, dust and sand papering so as to produce a smooth dry and matt surface i/c stopping & knotting within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge.

Polishing two coats with french polish on new wood and wood based surfaces to give an even surface i/c cleaning the surface of all dirt, dust and sand papering smooth and including a coat of wood filler within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge.

Painting one coat( e/I priming coat) on previously painted steel and metal surfaces surfaces with enamel paint to given and even shade i/c cleaning of all dirt, dust and other foreign matter sand papering and stopping within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. (a) With enamel paint other than white Asian Paint

Supplying and fixing acoustic Proof Door and window Assembly includes single door assembly of required size GI Powder coated outer , MS Powder coated Channel frame assembly , 96kg/ m3 Rockwool insulation, 75 mm thick, insulated Tissue paper , noise reduction 120dbA to 75 dbA heavy duty Door Hinges, heavy Duty super fine Handle assembly and dual lock Mechanism , superlon Rex door beading, Aluminium Pop revite ; packing, forwarding and hand over and installation at site within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. ISI make.

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. (a) Sal wood 1st quality.

Providing 40x3mm flat iron hold fast 40cm. Long i/c fixing to frame with 10mm diameter bolts and nuts and wooden plugs and embeding in cement concrete block 30x10x15cm in 1:3:6 mix (1cement : 3 sand : 6 graded stone aggregate of 20mm nominal size) within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge.

P/F panelled glazed or panelled and glazed shutters for windows and clerestory windows, i/c black enamelled iron hinges with necessary screws within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. (a) 35 mm thick using 2nd class deodar wood.

P/f wire gauge shutters using galvanised M.S. wire gauge of I.S. designation 85 G with wire of dia 0.56 mm for doors windows and clerestory windows i/c bright finished black enamelled iron hinges with necessary screws within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. (a) 30 mm thick using 2nd class deodar wood.

Supplying and fixing glass panes with providing and fixing plain edged cover fillets ( beading) 40mmx12mm section with wood screws i/c mitring at joints of Ist class deodar wood within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. Plain glass 5 mm thick saint gobain.

Applying priming coat over new wood and wood based surfaces after and i/c preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering snd knotting within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. (a) Ready mixed paint brushing primer for enamel Asian paint.

Painting two coats ( e/I priming coat ) on new wood and wood based surfaces with enamel paint to give wn even shade i/c cleaning the surface of dirt, dust and other foreign matter, sand papering and stopping within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. (a) With enamel paint other than white asian paint.

Providing and fixing in wall lining medium density fibre board IS: 14587:1998 marked, prelaminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. (a) 18mm thick

Providing and fixing white viterous chine pedestal type color white ,Hindware make floor mounted closed front single unit water closet (European type ) with seat and lid 10litres low level white viterious china flusing cistern and C.P. bend with fitting &C.I. brackets 40mm flush bend, overflow arrangements with specials of standrad make and mosquito proof coupling of approved Municipal design complete including painting of fitting and brackets, cutting and making good the walll and floor wherver required complete within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge (a) W.C. pan with ISI marked white solid plastic seat and lid (a) Hindware make.

P/F PTMT coloured/white high density polythylene/ poly propylene 10 liters capacity ( full flush) European standard control low level flushing cistern with fitting with a pair of low level flushing cistern with fitting with a pair of brackets with fitting such as lead valve with polythene float, with push buttons, couplings for connections with inlet outlet and overflow pipe, 40 mm dia C.P. flush bend i/c cutting holes in walls, and making good the same and connecting the flush bend with cistern and the closet( overflow pipe to be measured and paid separetely within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. ( Cera or Hindware make)

P/f vitreous china wash basin with single hole for pillar tap with cast iron or mild steel brackets, painted white i/c cutting holes and making good the same but e/i fitting within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. (a)Flat back 630x450mm ( Cera or Hindware make)

P/F vitreous china padestal for wash basin complete recessed at the back for the reception of pipes and fittings within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. ( Cera or Hindware make)

P/f plastic seat (solid type) and cover for wash down water closet with C.P. brass hinges and rubber buffers plastic within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. (a) White plastic seat cover

P/ F600x 600mm bevelled edge mirror of superior glass mounted on 6mm thick sheet and fixed to wooden plugs with C.P. brass screws and washers within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. a) saint gobain size 600x600 mm.

P/f C.P. brass bib tap with Capstan head 15mm dia within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. ( Nova make) heavy duty weight not less than 550 gm

P/f C.P. brass Pillar tap with Capstan head 15mm dia within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. ( Nova make) heavy duty weight not less than 750 gm

P/F brass angle valve within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. 15mm dia ( Nova make) heavy weight not less than 550 gm

P/fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked i/c fixing with approved adhesive etc. complete. (a) 75 mm dia pipes finolex or ISI make

(b) 110 mm dia pipes within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge finolex ISI make

P/f PVC floor trap of self cleaning design with grating without vent arm complete i/c cost of cutting and making goods the walls and floor within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. (a) 110x75 mm nominal diameter heavy duty

P/fixing C.P. jet for wash down water closet squatting pan within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. ( European type W.C. pan) heavy weight not less than 250 gm.

Coloured glazed tiles 10 mm thick in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3 ( 1 cement : 3 sand) finished with flush pointing in white cement within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. ( Nitco , kajaira make )

Coloured glazed tiles 10 mm thick in skirting, risers of steps and dado laid on a bed of 12 mm thick cement mortar 1:3 ( 1 cement : 3 sand) finished with flush pointing in white cement slurry within all meters leads and lifts as per direction and best satisfaction of Engineer-in- charge. ( Nitco, kajaria make.)