Public Works Department Tender

Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm (Six hundred millimetre) with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to a firm condition complete as per drawing and MORT&H technical specification clause 710.1.4.of IRC:78 and section 2200 as per the entire satisfaction and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete in Sub structure complete as per drawing and MORTH technical specification section 1500, 1700, 2200 RCC Grade M-30 (M- thirty) designed mix with cement contents not less than 407 kg. (Four hundred seven) Kilogram per cubic meter including curing complete using crushed stone aggregate 20mm (Twenty millimeter) nominal size including formwork but excluding the cost of reinforcement in bed block and dirt wall etcetra as per the direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Supplying fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and MORTH technical specifications section 1600 and 2200 including cutting, bending, binding, straightening and placing in position complete in all respect including cost of binding wire upto all height and depth as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Supplying fitting and placing HYSD bar reinforcement in super structure complete as per drawing and MORTH technical specifications section 1600 and 2300 including cutting, bending, binding, straightening and placing in position complete in all respect including cost of binding wire upto all height and depth as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete in super structure as per drawing and MORT&H. technical specification section 1500, 1700 and 2300 RCC Grade M-35 (M- thirty five) design mix with cement contents not less than 422 (Four hundred twenty two) Kilogram per cubic metre with 20mm (Twenty millimetre) nominal size grade crushed stone aggregate and curing complete including cost of form work, but excluding the cost of reinforcement for reinforced cement concrete work in deck slab and wheel guard as per the direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete design mix to obtain the minimum compressive strength of grade M-15 (M-Fifteen) with minimum cement content not less than 275 kg ( two hundred seventy five) kilogram per cubic meter in levelling course below approach slab and curing complete as per drawing and MORTH technical specification section 1700 and 2700 including cost of form work complete including carriage of materials within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax,GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete grade M-30 (M-thirty) design mix with cement contents not less than 407 kg (four hundred seven) kilogram per cubic meter with 20mm (Twenty milimeters) nominal size aggregate and curing complete in approach slab including the cost of form work and reinforcement complete as per drawings and MORTH technical specification section 1500,1600,1700 and 2700, including carriage of materials within all leads, lifts and other incidental as per the direction of Engineer-in-Charge. The rate is including of octroi, royality, Malkana, toll tax,GST or other taxes imposed by the Government.

Providing and laying 50mm (Fifty milimetre) thick Mastic asphalt wearing course on top of slab using paving grade bitumen VG-30 (VG-thirty) meeting the requirments given in table 500-29, including roughening of surface with wire brush, cleaning the surface, applying a thin bitumenios tack coat of VG-30 (VG-Thirty) grade bitumen at the rate of 0.325 kg (zero decimal three two five kilogram) per square metre. After applying tack coat fixing chicken mesh reinforcement of 1.50 mm (one decimal five zero millimetre) dia steel wire with hexagonal or rectangular opening of 20-25 mm (twenty to twenty five millimetre) before pouring mastic asphalt prepared using mastic cooker for heating coarse aggregate, filler and bitumen as per section 500 of MoRTH specification laid to required level and slope including providing antiskid surface with a layer of hard stone aggregate 13.2 mm (Thirteen decimal two millimetre) of 9.5 mm (nine decimal five millimetre) nominal size as per direction of Enginner-in-charge precoated with VG-30 (VG-thirty) grade bitumen applied at the rate of 0.005 cum (Zero decimal zero zero five cubic meter) per 10 sqm (ten square metre) and rolled or pressed in to surface at approximate spacing of 10 cm (ten centimetre) center to center in both directions, when the temperature of surfaces not less than 100 deg. C (one hundred degree celcius) protruding 1 mm (one millimetre) to 4 mm (four millimetre) over mastic surface all complete as per section 500 including carriage of material with in all laeds, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Construction of precast reinforced cement concrete mechanically mixed and vibrated precast railing of cement concrete grade M-30 (M-thirty) design mix with cement contents not less than 407 kg (four hundred seven) kilogram per cubic meter with aggregate size not exceeding 12mm (twelve milimeters) true to line and grade tolerance of vertical reinforcement cement concrete post not to exceed 1 in 500 ( one in five hundred) centre to centre spacing between vertical post not to exceed 2000mm ( two thousand millimeter) leaving adequate space between vertical post for expansion, complete as per drawing and MORTH technical specification section 1500,1600,1700 and 2700 including the cost of reinforcement and form work and curing complete as per directions of Engineer-in-Charge including carraige of materials within all leads, lifts and other incidential. The rates is including of octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Supplying, fitting and fixing in position true to line and level POT-PTFE bearing consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface sliding against stainless steel mating surface, complete assembly to be of cast steel/fabricated structural steel, metal and elastomer elements to be as per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2 and section 2000 of MoRTH Specifications complete as per drawing and approved Technical Specifications and as per direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing M.S drainage spouts complete with 100mm ( one hundred millimeter) dia galvanised mild steel down pipe corrosion resistant structural steel grating complete as per drawing and MORTH technical specifications section 2700 and as per the direction of Engineer-in- Charge including carriage of materials within all leads , lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax,GST or other taxes imposed by the Government

Providing and laying strip seal expansion joint catering to maximum horizontal movement upto 70 mm (seventy millimetre) complete as per approved drawings and standard specification to be install by the manufacturer/ supplier compliance to the manufacturer's instructions for installation complete as per Drawing and MORTH technical specification 2600 and as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, tolltax, GST or other taxes imposed by the government.

Providing and filling joint sealing compound as per drawing and technical specifications with coarse sand and 6% (six percent) bitumen by weight as per MORTH technical specifications section 2600 and as per direction of the Engineer- in charge including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing in position 20 mm (twenty millimetre) thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10m (ten metre) to cater for a horizontal movement upto 20 mm (twenty millimetre), covered with sealant complete as per drawing and technical specifications including carriage of materials within all leads , lifts and other incidental . The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Providing and laying High tensile steel wires/ strands USHA MARTIN make including all accessories for stressing, stressing operations and grouting complete as per drawing and MORTH technical Specifications sectin 1800 and as per direction of Engineer in Charge including carriage of materials with in all leads, lifts and other incidental . The rate is including of octroi, royality, Malkana,tolltax, GST or other taxes imposed by the government.

Earth work in excavation for all types of road structures such as retaining walls, breast walls, culverts, drains, parapets and other similar structures in all kinds and classification of soil, comprising of ordinary mix soil, ordinary rock, hard rock, chiseling/wedging out rocks (where blasting is prohibited) complete in accordance with the lines and dimensions shown in the drawings, including setting out, construction of shoring, bracing, removal of stumps and other deleterious materials and disposal of excavated material upto any leads and lifts including dressing of sides and bottom and back filling in trenches with excavated suitable approved materials to the original surface in layers not exceeding 150mm (one hundred fifty milimeters) compacted thickness including shoring and strutting and pumping or bailing out water (surface and sub-soil water) up to any depth and any quantum of water and cleaning of slush which may arise out during dewatering complete as per drawing and MORD Technical Specification section 300 & 1600 as per the direction and the entire satisfaction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals.The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (one cement: four sand : eight graded crushed / broken stone aggregate 40 mm (forty milimeters) nominal size ) and curing complete in Retaining walls, Breast walls, etcetera on ground or under water complete including, pumping or bailing out water ,dewatering removal of slush as required at site which may arise at the time of laying concrete complete for all heights/depths including cost of form work as per drawings and MORD technical specifications section 800, 900,1200 , 1600 and as per the direction of Engineer-in-Charge . including carriage of material within all leads, lifts and other incidentals .The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Back filling with granular materials behind abutment, Retaining wall/Breast wall, Wing walls and the like complete as per drawings and MORD technical specification section1200,1600 and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax,GST or any other taxes imposed by the Government.

Providing 100mm (one Hundred millimeter) dia ISI marked P.V.C. pipe Weep Holes in brick masonry/stone masonry plain/ reinforcement concrete abutments, wing wall/ return wall, retaining walls and breast walls, extending through the full width of the structure with slope of 1 (V):20H (One vertical : twenty Horizontal) towards draining face complete as per drawing and MORD technical specification section700,1200 and as per the direction and entire satisfaction of Engineer-in-Charge complete, including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.