Get tender documents at just ₹200 per tenderKnow More
Search made simple for latest tendersNo hidden charges. No keyword restrictionsExplore Our Plansor Pay Per Tender

Directorate Of Primary Education

  • Opening Date

    -

  • Closing Date

    21 Oct 2019

  • Tender Amount

    ₹ 17,18,055

  • EMD

    ₹ 51,541

Are you Looking for Joint Venture Partners, Contractor Consortium, Project Financiers for this tender?
We will help YOU to find the right match for FREE!
Summary

Construction Of 2 Class Room & Girls Toilet Block 1+2 & Boys Toiletblock 1+2 At Patavali P.s.ta-dediyapada In Narmada District.

Are you looking for Materials and Services for this tender?
We will help YOU to find the right partner for your needs for FREE!
BOQ Items

No BOQs Available

ANNEXURE Annexure – A Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete. The rate shall be including of providing two coats of primer of approved brand and manufacturer on new wall surfaces to give and even shade including throughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth. 1.1 MATERIALS The water shall confirm to M-1. Acrylic shall be a high performance, long lasting exterior paint and shall withstand extreme rainfall, humidity and heat, lot shall based on specify formulated 100% pure acrylic resins; light fast pigments and other special additives to give excellent protection against alkali and U.V. degradation. It shall forms a tough bond with exterior surface, preventing peeling, fungus and algae growth for years and years. It should have smooth and free flowing consistency and thinner ratio of paint; water shall be 100:40 by volume for each coat. The final finish shall be either smooth or matt as per instruction of engineer-in-charge. It shall be of required shades offered by engineer-in-charge. 1.2 WORKMANSHIP Scaffolding : Where scaffolding is required, it shall be erected in such a way that as far as possible, no part of scaffolding shall rest against the surface to be distempered. A properly secured strong and well tied suspended platform (Zoola) may be used for distempering. Where ladders are used, pieces of old gunny bags shall be tied at top and bottom to prevent scratches to the walls and floors. For distempering to ceiling, proper stage scaffolding shall be erected where necessary and the floor area shall be covered with plastic so that the flooring is not spoilt. 1.3 PREPARATION OF SURFACE The surface shall be thoroughly cleaned of all dust, dirt, mortar dropping and other foreign matter before paint is to be applied. The surface spoiled by smoke soot shall be scrapped with steel wire brushes or steel scrapers or shall be rubbed with over burnt surkhi or brick bats. The surface shall be then broomed to remove all dust and dirt and shall be washed with clean water. Oil of grease spots shall be removed by suitable chemical. Smooth surface shall be rubbed with wire brushes. All unsound portion of the surface plaster shall be removed to full depth of plaster in rectangular patches and plastered again after raking the massonary joints properly. Such portions shall be wetted and allowed to dry. Any crevices, at any level shall be cleaned and filled with the plaster mortar and cured as above. They shall then be given one coat of paint. All unnecessary nails shall be removed, the holes, cracks, patches etc. shall be made good with material similar in compostion to the surface to be prepared. New plaster surface shall be allowed to dry for atleast 2 months before applications of paint. Pitting in plaster shall be made good with plaster again and papered with a fine grade sand paper and made smooth. A coat of paint shall be applied over the patches. The surface shall be allowed to dry thoroughly before the regular coat of paint is applied. The surface affected by mould, moss, fungi, algae lichens, efflorescence etc. shall be trated in accordance with IS : 2395 (Part - I) - 1966. Before applying paint any unevenness shall be made good by applying putty made out of plaster of paris mixed with water on entire surface, including filling up the undulation and then sand papering the same after it has dries. 1.4 PRIMING COAT One coat of exterior emulsion primer shall be applied on new surface. No conventional primer/putty is recommended on the exterior surface. Interior cement primer usage is to be strictly avoided for exterior. 1.5 PREPARATION AND APPLICATION PAINT Apply two coats of fin

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.