Manpower Tenders

Details: Description Republic Of The Philippines Cmo Government Of Ormoc City P.r. No.: 250983 Bids And Awards Committee Quotation No.: 256225-3403 Ormoc City Philgeps No.: Standard Form Title: Request For Quotation Please Quote Your Lowest Price On The Item/s Listed Below, Subject To The General Conditions On The Last Page, Stating The Shortest Time Of Delivery And Submit Your Quotation Duly Signed By You Or Your Authorized Representative Not Later Than _______ _______________________. (sgd) Katheryn A. Solaña Procurement Officer Note: (1) All Entries Must Be Typewritten Or Legibly Written. Of Acceptance By The End-user. (4) Price Validity Shall Be For A Period Of (2) Delivery Period Within 15 C.d. Upon Receipt Of The Sixty (60) Days. (5) G-eps Reg No., Mayors Permit, Dti/sec, And For Abc's Above Approved Funded Purchase Order (p.o.). Administrative 500k - Itr & Omnibus Sworn Statement Shall Be Attached Upon Submission Penalties Pursuant To Sec. 69 Of The Revised Irr-ra 9184 Shall (6) Bidders Shall Submit Original Brochures Showing Certifications Of Be For A Minimum For Non-delivery Without Valid Reason. The Products If Applicable. (7) The Approved Budget Ceiling For This (3) Warranty Shall Be For A Period Of Three (3) Months Of Procurement Is (amount Indicated Below) Supplies & Materials, One (1) Year For Equipment, From Date Php 435,000.00 Activities Schedule From To 1 Issuance Of Canvass Friday March 28, 2025 Wednesday April 02, 2025 2 Submission Of Canvass Thursday April 03, 2025 10:00 Am 3 Opening Of Canvass Thursday April 03, 2025 2:00 Pm # Item And Description Qty Unit Cost Total 1 Supply, Delivery And Installation Of Tarpulins W/ Framing 1 Lot * Quantity: 200 Pcs With Tarp Size: 3x8 Feet * Full Colored Printing, With Printed Tarp Fully Stretch And Stapled In A Wooden Frame Size 1x1x1 * To Install In Designated Areas And Lamp Post Within The City As Per Event * Inclusive Of Vehicle, Manpower, Tools And Materials Needed During Installation -x-x-x-x-x-x-x- Nothing Follows -x-x-x-x-x-x-x- Grand Total >>> * Brand And Model : Warranty : Delivery Period : Price Validity : After Having Carefully Read And Accepted Your Conditions, I/we Quote You On The Item At Prices Noted Above And Hereby Commit To Deliver The Same If Adjudged To Have The Lowest And Responsive Quotation. Business Name 2025-03-250983 Printed Name/signature/date

Details: Description Philippine Bidding Documents (as Harmonized With Development Partners) Construction Of Warehouse And Drying Facility At Art Center, Brgy. Nanga, Pototan, Iloilo Bid No. Agr-25-149-b Iloilo Provincial Government Sixth Edition Table Of Contents Glossary Of Terms, Abbreviations, And Acronyms 4 Section I. Invitation To Bid 6 Section Ii. Instructions To Bidders 8 1. Scope Of Bid 8 2. Funding Information 8 3. Bidding Requirements 8 4. Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices 8 5. Eligible Bidders 9 6. Origin Of Associated Goods 9 7. Subcontracts 9 8. Pre-bid Conference 9 9. Clarification And Amendment Of Bidding Documents 9 10. Documents Comprising The Bid: Eligibility And Technical Components 10 11. Documents Comprising The Bid: Financial Component 10 12. Alternative Bids 10 13. Bid Prices 11 14. Bid And Payment Currencies 11 15. Bid Security 11 16. Sealing And Marking Of Bids 11 17. Deadline For Submission Of Bids 11 18. Opening And Preliminary Examination Of Bids 12 19. Detailed Evaluation And Comparison Of Bids 12 20. Post Qualification 12 21. Signing Of The Contract 12 Section Iii. Bid Data Sheet 13 Section Iv. General Conditions Of Contract 16 1. Scope Of Contract 16 2. Sectional Completion Of Works 16 3. Possession Of Site 16 4. The Contractor’s Obligations 16 5. Performance Security 17 6. Site Investigation Reports 17 7. Warranty 17 8. Liability Of The Contractor 17 9. Termination For Other Causes 17 10. Dayworks 18 11. Program Of Work 18 12. Instructions, Inspections And Audits 18 13. Advance Payment 18 14. Progress Payments 18 15. Operating And Maintenance Manuals 18 Section V. Special Conditions Of Contract 19 Section Vi. Specifications 20 Section Vii. Drawings 24 Section Viii. Bill Of Quantities 30 Section Ix. Checklist Of Technical And Financial Documents 37 Glossary Of Terms, Abbreviations, And Acronyms Abc – Approved Budget For The Contract. Arcc – Allowable Range Of Contract Cost. Bac – Bids And Awards Committee. Bid – A Signed Offer Or Proposal To Undertake A Contract Submitted By A Bidder In Response To And In Consonance With The Requirements Of The Bidding Documents. Also Referred To As Proposal And Tender. (2016 Revised Irr, Section 5[c]) Bidder – Refers To A Contractor, Manufacturer, Supplier, Distributor And/or Consultant Who Submits A Bid In Response To The Requirements Of The Bidding Documents. (2016 Revised Irr, Section 5[d]) Bidding Documents – The Documents Issued By The Procuring Entity As The Bases For Bids, Furnishing All Information Necessary For A Prospective Bidder To Prepare A Bid For The Goods, Infrastructure Projects, And/or Consulting Services Required By The Procuring Entity. (2016 Revised Irr, Section 5[e]) Bir – Bureau Of Internal Revenue. Bsp – Bangko Sentral Ng Pilipinas. Cda – Cooperative Development Authority. Consulting Services – Refer To Services For Infrastructure Projects And Other Types Of Projects Or Activities Of The Gop Requiring Adequate External Technical And Professional Expertise That Are Beyond The Capability And/or Capacity Of The Gop To Undertake Such As, But Not Limited To: (i) Advisory And Review Services; (ii) Pre-investment Or Feasibility Studies; (iii) Design; (iv) Construction Supervision; (v) Management And Related Services; And (vi) Other Technical Services Or Special Studies. (2016 Revised Irr, Section 5[i]) Contract – Refers To The Agreement Entered Into Between The Procuring Entity And The Supplier Or Manufacturer Or Distributor Or Service Provider For Procurement Of Goods And Services; Contractor For Procurement Of Infrastructure Projects; Or Consultant Or Consulting Firm For Procurement Of Consulting Services; As The Case May Be, As Recorded In The Contract Form Signed By The Parties, Including All Attachments And Appendices Thereto And All Documents Incorporated By Reference Therein. Contractor – Is A Natural Or Juridical Entity Whose Proposal Was Accepted By The Procuring Entity And To Whom The Contract To Execute The Work Was Awarded. Contractor As Used In These Bidding Documents May Likewise Refer To A Supplier, Distributor, Manufacturer, Or Consultant. Cpi – Consumer Price Index. Dole – Department Of Labor And Employment. Dti – Department Of Trade And Industry. Foreign-funded Procurement Or Foreign-assisted Project – Refers To Procurement Whose Funding Source Is From A Foreign Government, Foreign Or International Financing Institution As Specified In The Treaty Or International Or Executive Agreement. (2016 Revised Irr, Section 5[b]). Gfi – Government Financial Institution. Gocc – Government-owned And/or –controlled Corporation. Goods – Refer To All Items, Supplies, Materials And General Support Services, Except Consulting Services And Infrastructure Projects, Which May Be Needed In The Transaction Of Public Businesses Or In The Pursuit Of Any Government Undertaking, Project Or Activity, Whether In The Nature Of Equipment, Furniture, Stationery, Materials For Construction, Or Personal Property Of Any Kind, Including Non-personal Or Contractual Services Such As The Repair And Maintenance Of Equipment And Furniture, As Well As Trucking, Hauling, Janitorial, Security, And Related Or Analogous Services, As Well As Procurement Of Materials And Supplies Provided By The Procuring Entity For Such Services. The Term “related” Or “analogous Services” Shall Include, But Is Not Limited To, Lease Or Purchase Of Office Space, Media Advertisements, Health Maintenance Services, And Other Services Essential To The Operation Of The Procuring Entity. (2016 Revised Irr, Section 5[r]) Gop – Government Of The Philippines. Infrastructure Projects – Include The Construction, Improvement, Rehabilitation, Demolition, Repair, Restoration Or Maintenance Of Roads And Bridges, Railways, Airports, Seaports, Communication Facilities, Civil Works Components Of Information Technology Projects, Irrigation, Flood Control And Drainage, Water Supply, Sanitation, Sewerage And Solid Waste Management Systems, Shore Protection, Energy/power And Electrification Facilities, National Buildings, School Buildings, Hospital Buildings, And Other Related Construction Projects Of The Government. Also Referred To As Civil Works Or Works. (2016 Revised Irr, Section 5[u]) Lgus – Local Government Units. Nfcc – Net Financial Contracting Capacity. Nga – National Government Agency. Pcab – Philippine Contractors Accreditation Board. Philgeps - Philippine Government Electronic Procurement System. Procurement Project – Refers To A Specific Or Identified Procurement Covering Goods, Infrastructure Project Or Consulting Services. A Procurement Project Shall Be Described, Detailed, And Scheduled In The Project Procurement Management Plan Prepared By The Agency Which Shall Be Consolidated In The Procuring Entity's Annual Procurement Plan. (gppb Circular No. 06-2019 Dated 17 July 2019) Psa – Philippine Statistics Authority. Sec – Securities And Exchange Commission. Slcc – Single Largest Completed Contract. Un – United Nations. Republic Of The Philippines Iloilo Provincial Government Section I. Invitation To Bid For Construction Of Warehouse And Drying Facility At Art Center, Brgy. Nanga, Pototan, Iloilo Bid No. Agr-25-149-b 1. The Iloilo Provincial Government, Through The 20% Nta Development Fund – Fy 2025 Intends To Apply The Sum Of Twenty Million Pesos (p 20,000,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Agr-25-149-b For The Construction Of Warehouse And Drying Facility At Art Center, Brgy. Nanga, Pototan, Iloilo For The Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Iloilo Provincial Government Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required One Eighty 180 Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From The Bids And Awards Committee Secretariat, 5th Floor, New Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City, Philippines And Inspect The Bidding Documents At The Address Given Below From 8:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On March 28, 2025 From Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Ten Thousand Pesos (p10, 000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Iloilo Provincial Government Will Hold A Pre-bid Conference On April 8, 2025, 9:00 A.m. At Bids And Awards Committee Secretariat, 5th Floor, New Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City, Philippines, And/or Through Videoconferencing/webcasting Via Zoom Conference Which Shall Be Open To Prospective Bidders. The Default Meeting Id And Password Shall Be: Meeting Id: 4340851724 // Password: 0922 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At Bids And Awards Committee Secretariat, 5th Floor, New Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City On Or Before April 22, 2025, 9:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On April 22, 2025, 9:01 A.m. At Bids And Awards Committee Secretariat, 5th Floor, New Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City, Philippines. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Iloilo Provincial Government Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Atty. Raemman M. Lagrada Head, Bac Secretariat 5f New Iloilo Provincial Capitol Bonifacio Drive, Iloilo City Tel. No. (33) 336-0736 Fax No. (33) 337-7731 Email: Ipg_bacs@yahoo.com 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.iloilo.gov.ph March 17, 2025 Atty. Dennis T. Ventilacion Bac Chairperson Section Ii. Instructions To Bidders 1. Scope Of Bid The Procuring Entity, Iloilo Provincial Government Invites Bids For The Construction Of Warehouse And Drying Facility At Art Center, Brgy. Nanga, Pototan, Iloilo, With Project Identification Number Agr-25-149-b. The Procurement Project (referred To Herein As “project”) Is For The Construction Of Works, As Described In Section Vi (specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For 2025 In The Amount Of Twenty Million Pesos (p 20,000,000.00) 2.2. The Source Of Funding Is: A. Lgu’s 20% Nta Development Fund – Fy 2025 As Approved By Sanggunian. 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manual And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Invitation To Bid By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Inspected The Site, Determined The General Characteristics Of The Contracted Works And The Conditions For This Project, Such As The Location And The Nature Of The Work; (b) Climatic Conditions; (c) Transportation Facilities; (c) Nature And Condition Of The Terrain, Geological Conditions At The Site Communication Facilities, Requirements, Location And Availability Of Construction Aggregates And Other Materials, Labor, Water, Electric Power And Access Roads; And (d) Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices The Procuring Entity, As Well As The Bidders And Contractors, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. The Bidder Must Have An Experience Of Having Completed A Single Largest Completed Contract (slcc) That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc Adjusted, If Necessary, By The Bidder To Current Prices Using The Psa’s Cpi, Except Under Conditions Provided For In Section 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184. A Contract Is Considered To Be “similar” To The Contract To Be Bid If It Has The Major Categories Of Work Stated In The Bds. 5.3. For Foreign-funded Procurement, The Procuring Entity And The Foreign Government/foreign Or International Financing Institution May Agree On Another Track Record Requirement, As Specified In The Bidding Document Prepared For This Purpose. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.2 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Associated Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Fifty Percent (50%) Of The Project. The Procuring Entity Has Prescribed That: A. Subcontracting Is Not Allowed. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On The Specified Date And Time And Either At Its Physical Address At Bac Office, 5th Floor, New Iloilo Provincial Capitol, Iloilo City And/or Through Videoconferencing As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Ix. Checklist Of Technical And Financial Documents. 10.2. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 10.3. In Joint Ventures, A Special Pcab License, And Registration For The Type And Cost Of The Contract For This Project, Shall Be Required. Any Additional Type Of Contractor License Or Permit Shall Be Indicated In The Bds. 10.4. A List Of Contractor’s Key Personnel (e.g., Project Manager, Project Engineers, Materials Engineers, And Foremen) Assigned To The Contract To Be Bid, With Their Complete Qualification And Experience Data Shall Be Provided. These Key Personnel Must Meet The Required Minimum Years Of Experience Set In The Bds. 10.5. A List Of Contractor’s Major Equipment Units, Which Are Owned, Leased, And/or Under Purchase Agreements, Supported By Proof Of Ownership, Certification Of Availability Of Equipment From The Equipment Lessor/vendor For The Duration Of The Project, As The Case May Be, Must Meet The Minimum Requirements For The Contract Set In The Bds. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Ix. Checklist Of Technical And Financial Documents. 11.2. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.3. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Alternative Bids Bidders Shall Submit Offers That Comply With The Requirements Of The Bidding Documents, Including The Basic Technical Design As Indicated In The Drawings And Specifications. Unless There Is A Value Engineering Clause In The Bds, Alternative Bids Shall Not Be Accepted. 13. Bid Prices All Bid Prices For The Given Scope Of Work In The Project As Awarded Shall Be Considered As Fixed Prices, And Therefore Not Subject To Price Escalation During Contract Implementation, Except Under Extraordinary Circumstances As Determined By The Neda And Approved By The Gppb Pursuant To The Revised Guidelines For Contract Price Escalation Guidelines. 14. Bid And Payment Currencies 14.1. Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 14.2. Payment Of The Contract Price Shall Be Made In: A. Philippine Pesos. 15. Bid Security 15.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 15.2. The Bid And Bid Security Shall Be Valid Until August 20, 2025. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 16. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. If The Procuring Entity Allows The Submission Of Bids Through Online Submission To The Given Website Or Any Other Electronic Means, The Bidder Shall Submit An Electronic Copy Of Its Bid, Which Must Be Digitally Signed. An Electronic Copy That Cannot Be Opened Or Is Corrupted Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. 17. Deadline For Submission Of Bids The Bidders Shall Submit On The Specified Date And Time And Either At Its Physical Address Or Through Online Submission As Indicated In Paragraph 7 Of The Ib. 18. Opening And Preliminary Examination Of Bids 18.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 18.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Entity’s Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, All Bids And Combinations Of Bids As Indicated In The Bds Shall Be Received By The Same Deadline And Opened And Evaluated Simultaneously So As To Determine The Bid Or Combination Of Bids Offering The Lowest Calculated Cost To The Procuring Entity. Bid Security As Required By Itb Clause 16 Shall Be Submitted For Each Contract (lot) Separately. 19.3. In All Cases, The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184 Must Be Sufficient For The Total Of The Abcs For All The Lots Participated In By The Prospective Bidder. 20. Post Qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps), And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Itb Clause 5.2 For This Purpose, Contracts Similar To The Project Refer To Contracts Which Have The Same Major Categories Of Work, Which Shall Be: A) Construction Of Warehouse/buildings 7.1 The Procuring Entity Has Prescribed That Subcontracting Is Not Allowed. 10.3 [specify If Another Contractor License Or Permit Is Required.] 10.4 The Key Personnel Must Meet The Required Minimum Years Of Experience Set Below: Key Personnel General Experience Relevant Experience 1-project Engineer 1 Year 1 Year 1-materials Engineer 1 Year 1 Year 1-agricultural And Biosystems Engineer 1 Year 1 Year 1-health & Safety Officer 1 Year 1 Year 1-foreman 1 Year 1 Year 1-carpenter 1 Year 1 Year 1-steelman 1 Year 1 Year 1-mason 1 Year 1 Year 1-welder 1 Year 1 Year 1-electrician 1 Year 1 Year 1-plumber 1 Year 1 Year 1-painter 1 Year 1 Year 10.5 The Minimum Major Equipment Requirements Are The Following: Equipment Capacity Number Of Units Dump Truck - 1 Chainsaw - 1 Backhoe - 1 Pneumatic Tire Roller - 1 One Bagger Mixer - 1 Bar Cutter - 1 Welding Machine - 1 Electric Drill - 1 12 Alternative Bids Are Not Allowed 15.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than Two Percent (2%) Of Abc, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; B. The Amount Of Not Less Than Five Percent (5%) Of Abc If Bid Security Is In Surety Bond. 16 Bidders Shall Prepare An Original Of The First (eligibility And Technical) And Second (financial) Envelopes. In Addition, Bidders Shall Submit Separate Copies Of The First And Second Envelopes (copy 1, Copy 2) And Each Set Of Documents Must Clearly Indicate Whether The Same Is Original, Copy 1, Or Copy 2. In The Event Of Any Discrepancy Between The Original And The Copies, The Original Shall Prevail. Itb Clause 16 All Envelopes Shall: A. Contain The Name Of The Contract To Be Bid In Capital Letters: “construction Of Warehouse And Drying Facility At Art Center, Brgy, Nanga, Pototan, Iloilo” B. Bear The Name And Address Of The Bidder In Capital Letters; C. Addressed To: Atty. Dennis T. Ventilacion, Chairperson, Bids And Awards Committee: D. Bear The Specific Identification Of This Procurement: “agr-25-149-b” E. Bear A Warning “do Not Open Before April 22, 2025” Indicating The Date And Time For The Submission Of Bids On The Blank: Bid Envelopes That Are Not Properly Sealed And Marked, As Required In The Bidding Documents, Shall Not Be Rejected, But The Bidder Or Its Duly Authorized Representative Shall Acknowledge Such Condition Of The Bid As Submitted. The Bac Or The Procuring Entity Shall Assume No Responsibility For The Misplacement Of The Contents Of The Improperly Sealed Or Marked Bid, Or For Its Premature Opening. Any Interlineations, Erasures, Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By The Duly Authorized Representative/s Of The Bidder 19.2 Partial Bid Is Not Allowed 20 No Further Instructions. 21 The Additional Contract Documents Relevant To The Project That Are Required By The Procuring Entity Are: A. Construction Schedule And S-curve; B. Manpower Schedule; C. Construction Methods; D. Equipment Utilization Schedule; E. Construction Safety And Health Program Approved By The Department Of Labor And Employment; And F. Pert/cpm Section Iv. General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. 2. Sectional Completion Of Works If Sectional Completion Is Specified In The Special Conditions Of Contract (scc), References In The Conditions Of Contract To The Works, The Completion Date, And The Intended Completion Date Shall Apply To Any Section Of The Works (other Than References To The Completion Date And Intended Completion Date For The Whole Of The Works). 3. Possession Of Site 4.1. The Procuring Entity Shall Give Possession Of All Or Parts Of The Site To The Contractor Based On The Schedule Of Delivery Indicated In The Scc, Which Corresponds To The Execution Of The Works. If The Contractor Suffers Delay Or Incurs Cost From Failure On The Part Of The Procuring Entity To Give Possession In Accordance With The Terms Of This Clause, The Procuring Entity’s Representative Shall Give The Contractor A Contract Time Extension And Certify Such Sum As Fair To Cover The Cost Incurred, Which Sum Shall Be Paid By Procuring Entity. 4.2. If Possession Of A Portion Is Not Given By The Above Date, The Procuring Entity Will Be Deemed To Have Delayed The Start Of The Relevant Activities. The Resulting Adjustments In Contract Time To Address Such Delay May Be Addressed Through Contract Extension Provided Under Annex “e” Of The 2016 Revised Irr Of Ra No. 9184. 4. The Contractor’s Obligations The Contractor Shall Employ The Key Personnel Named In The Schedule Of Key Personnel Indicating Their Designation, In Accordance With Itb Clause 10.3 And Specified In The Bds, To Carry Out The Supervision Of The Works. The Procuring Entity Will Approve Any Proposed Replacement Of Key Personnel Only If Their Relevant Qualifications And Abilities Are Equal To Or Better Than Those Of The Personnel Listed In The Schedule. 5. Performance Security 5.1. Within Ten (10) Calendar Days From Receipt Of The Notice Of Award From The Procuring Entity But In No Case Later Than The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr. 5.2. The Contractor, By Entering Into The Contract With The Procuring Entity, Acknowledges The Right Of The Procuring Entity To Institute Action Pursuant To Ra No. 3688 Against Any Subcontractor Be They An Individual, Firm, Partnership, Corporation, Or Association Supplying The Contractor With Labor, Materials And/or Equipment For The Performance Of This Contract. 6. Site Investigation Reports The Contractor, In Preparing The Bid, Shall Rely On Any Site Investigation Reports Referred To In The Scc Supplemented By Any Information Obtained By The Contractor. 7. Warranty 7.1. In Case The Contractor Fails To Undertake The Repair Works Under Section 62.2.2 Of The 2016 Revised Irr, The Procuring Entity Shall Forfeit Its Performance Security, Subject Its Property(ies) To Attachment Or Garnishment Proceedings, And Perpetually Disqualify It From Participating In Any Public Bidding. All Payables Of The Gop In His Favor Shall Be Offset To Recover The Costs. 7.2. The Warranty Against Structural Defects/failures, Except That Occasioned-on Force Majeure, Shall Cover The Period From The Date Of Issuance Of The Certificate Of Final Acceptance By The Procuring Entity. Specific Duration Of The Warranty Is Found In The Scc. 8. Liability Of The Contractor Subject To Additional Provisions, If Any, Set Forth In The Scc, The Contractor’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Contractor Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. 9. Termination For Other Causes Contract Termination Shall Be Initiated In Case It Is Determined Prima Facie By The Procuring Entity That The Contractor Has Engaged, Before, Or During The Implementation Of The Contract, In Unlawful Deeds And Behaviors Relative To Contract Acquisition And Implementation, Such As, But Not Limited To Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices As Stated In Itb Clause 4. 10. Dayworks Subject To The Guidelines On Variation Order In Annex “e” Of The 2016 Revised Irr Of Ra No. 9184, And If Applicable As Indicated In The Scc, The Dayworks Rates In The Contractor’s Bid Shall Be Used For Small Additional Amounts Of Work Only When The Procuring Entity’s Representative Has Given Written Instructions In Advance For Additional Work To Be Paid For In That Way. 11. Program Of Work 11.1. The Contractor Shall Submit To The Procuring Entity’s Representative For Approval The Said Program Of Work Showing The General Methods, Arrangements, Order, And Timing For All The Activities In The Works. The Submissions Of The Program Of Work Are Indicated In The Scc. 11.2. The Contractor Shall Submit To The Procuring Entity’s Representative For Approval An Updated Program Of Work At Intervals No Longer Than The Period Stated In The Scc. If The Contractor Does Not Submit An Updated Program Of Work Within This Period, The Procuring Entity’s Representative May Withhold The Amount Stated In The Scc From The Next Payment Certificate And Continue To Withhold This Amount Until The Next Payment After The Date On Which The Overdue Program Of Work Has Been Submitted. 12. Instructions, Inspections And Audits The Contractor Shall Permit The Gop Or The Procuring Entity To Inspect The Contractor’s Accounts And Records Relating To The Performance Of The Contractor And To Have Them Audited By Auditors Of The Gop Or The Procuring Entity, As May Be Required. 13. Advance Payment The Procuring Entity Shall, Upon A Written Request Of The Contractor Which Shall Be Submitted As A Contract Document, Make An Advance Payment To The Contractor In An Amount Not Exceeding Fifteen Percent (15%) Of The Total Contract Price, To Be Made In Lump Sum, Or At The Most Two Installments According To A Schedule Specified In The Scc, Subject To The Requirements In Annex “e” Of The 2016 Revised Irr Of Ra No. 9184. 14. Progress Payments The Contractor May Submit A Request For Payment For Work Accomplished. Such Requests For Payment Shall Be Verified And Certified By The Procuring Entity’s Representative/project Engineer. Except As Otherwise Stipulated In The Scc, Materials And Equipment Delivered On The Site But Not Completely Put In Place Shall Not Be Included For Payment. 15. Operating And Maintenance Manuals 15.1. If Required, The Contractor Will Provide “as Built” Drawings And/or Operating And Maintenance Manuals As Specified In The Scc. 15.2. If The Contractor Does Not Provide The Drawings And/or Manuals By The Dates Stated Above, Or They Do Not Receive The Procuring Entity’s Representative’s Approval, The Procuring Entity’s Representative May Withhold The Amount Stated In The Scc From Payments Due To The Contractor. Section V. Special Conditions Of Contract Gcc Clause 2 As Per Construction Schedule/contract Period 3.1 The Procuring Entity Shall Give Possession Of All Parts Of The Site To The Contractor Upon Effectivity Of The Contracts. 6 No Further Instructions 7.2 [in Case Of Permanent Structures, Such As Buildings Of Types 4 And 5 As Classified Under The National Building Code Of The Philippines And Other Structures Made Of Steel, Iron, Or Concrete Which Comply With Relevant Structural Codes (e.g., Dpwh Standard Specifications), Such As, But Not Limited To, Steel/concrete Bridges, Flyovers, Aircraft Movement Areas, Ports, Dams, Tunnels, Filtration And Treatment Plants, Sewerage Systems, Power Plants, Transmission And Communication Towers, Railway System, And Other Similar Permanent Structures:] Fifteen (15) Years. 10 Dayworks Are Applicable At The Rate Shown In The Contractor’s Original Bid. 11.1 No Further Instructions 11.2 No Further Instructions 13 The Amount Of The Advance Shall Not Exceed 15% Of The Total Contract Price. 14 Materials And Equipment Delivered On The Site But Not Completely Installed Or Constructed Shall Not Be Included For Payment. 15.1 The Date By Which Operating And Maintenance Manuals Are Required Shall Be At Least 5 Days Before The Testing And Commissioning. The Date By Which “as Built” Drawings Are Required Prior To The Final Billing. 15.2 The Amount To Be Withheld For Failing To Produce “as Built” Drawings And/or Operating And Maintenance Manuals By The Date Required Is 1% Of The Final Contract Amount. Section Vi. Specification General Requirements All Works To Be Done Shall Be With First Class Workmanship And Shall Conform To The Plans And Specifications. All Materials To Be Used Shall Be Of Good Quality And Properly Inspected By The Authorized Representative Or The Engineer In-charge. The Provincial Agriculturist Is Reserved The Right To Rescind, Terminate, Suspend The Contract If He Deems Necessary And To The Best Interest Of The Government. The Contractor Shall Be Liable For All Damages That Will Occur During The Construction Of The Project. Scope Of Works The Works Include Furnishing Of Labor, Materials, Tools, Equipment And Other Incidentals Necessary To Complete The Project Such As Mobilization/demobilization, Clearing, Grubbing & Staking, Excavation Works, Backfilling, Embankment With Compaction, Concrete Works, Masonry Works, Plastering Works, Wall Installation, Roof Framing, Roofing Works, Ceiling Works, Tile Works, Door And Windows With Complete Accessories, Plumbing Works, Painting Works, Construction Of Catch Basin, Installation Of Logo & Installation Of Electrical Works And Fire Alarm System. General Condition A. The Works To Be Done Herein Shall Be The Construction Of Warehouse And Drying Facility As Of Approved And Of Quality Materials Completed As Per Plans, Details And Specifications. Supervision Of The Work Shall Be Done Under The Responsibility Of The Project Engineer With The Help Of The Construction Foreman. B. All Materials Employed And To Be Used In The Construction Shall Be Brand New, Unless Otherwise Or As Directed And Approved By The Project Engineer. C. Skilled Workmen And Workmanship Subject To Project Engineer’s Approval Shall Perform Methods Of The Construction In The Most Acceptable Manner. D. The Drawings Referred To In The Specifications Including Supplementary One, To Be Furnished As The Work Progress Are Intended To Cooperate With The Specification And To Form Part Hereof. Where Figures Are Given, They Are To Be Followed In Performance To Measurement By Scale. E. The Assigned Engineer Or Construction Foreman Shall Lay – Out The Building In Accordance With The Drawings And Directions On Plans As He Shall Not Only Responsible But Liable For Any Failure To Comply In This Respect With The Said Drawings, Specifications And Directions For Its Due And Accurate Location On The Lot. Project Sign Board / Billboard The Contractor Shall Ensure That The Project Site Is Identified With Information Billboard Which Shall Be Erected At The Beginning And Ending Of The Proposed Project. The Layout Of The Billboard Shall Accord To The Specifications Pursuant To The Commission On Audit (coa) Circular No. 2013-004 Issued On January 30, 2013. Coa Billboard Pao Billboard The Billboard’s Specifications Shall Conform To The Following Requirements: A. Tarpaulin, White, 8ft X 8ft (coa) And 4ft X 8ft (pao): B. Resolution: 70 Dpi; C. Font: Helvetica; D. Font Size: Main Information – 3”; E. Sub-information – 1”; F. Font Color: Black; G. Suitable Frame: Rigid Wood Or Steel Frame With Post; And, H. Posting: Outside Display At The Project Location After Award Has Been Made. Measurement The Supply And Erection Of Project Billboard Shall Be In Accordance With Provisions Of This Specification. Basis Of Payment No Additional Payment Shall Be Made In This Regard. A. Construction Of Warehouse I. Mobilization/demobilization Mobilization And Demobilization The Work Consists Of The Mobilization And Demobilization Of The Contractor’s Forces And Equipment Necessary For Performing The Work Required Under The Contract. It Does Not Include Mobilization And Demobilization For Specific Items Of Work In Fulfilling The Contract Requirements For The Commencement Of Work. Equipment And Material Mobilization Shall Include All Activities And Associated Costs For Transportation Of Contractor’s Personnel, Equipment, And Operating Supplies To The Site; Establishment Of Offices, Buildings, And Other Necessary General Facilities For The Contractor’s Operations At The Site. Demobilization Demobilization Shall Include All Activities And Associated Costs For Transportation Of Personnel, Equipment, And Supplies Not Required Or Included In The Contract From The Site; Including The Disassembly, Removal, And Site Cleanup Of Offices, Buildings, And Other Facilities Assembled On The Site Specifically For This Contract. Ii. Clearing, Grubbing And Staking Clearing And Grubbing And Cutting Of Trees Shall Include Handling, Salvaging, Piling And Disposing Off The Cleared Materials With All Leads And Lifts. Trees Shall Be Cut In Sections From The Top Downwards. All Timber Shall Not Be Used By The Contractor For Any Purpose And Shall Remain The Property Of The Provincial Agriculture Office. Clearing Shall Consist Of The Cutting, Removing And Disposal Of All Trees, Bushes, Shrubs, Grass, Weeds, Other Vegetation, Anthills, Rubbish, Fences, Top Organic Soil And Rocks And Boulders Exposed Or Lying On The Surface. The Construction Site Shall Be Leveled According To The Plans And Cleared Of Rubbish, Roots And Other Perishable And Objectionable Matters To A Suitable Subgrade. All Such Unsuitable Materials Shall Be Removed From The Construction Site And Spread Uniformly Over The Areas Adjacent To The Proposed Building, Or Otherwise Disposed Of As Maybe Directed By The Architect/engineer In-charge Of The Construction. Materials Obtained From Clearing And Grubbing Shall Be Disposed Off In Borrow Pits Or Other Suitable Places And Be Covered Up With Soil Or Gravel As Directed By The Engineer. The Burning Of Combustible Materials Shall Not Be Permitted. Staking-out The Building Lines Shall Be Staked Out On The Lines And Grades Shown In The Drawings Established Before Any Excavation Is Started. Batter Boards And Reference Marks Shall Be Erected At Such Place Where They Will Not Be Disturbed During The Excavation Of The Building. During The Period Of Commencement Of Works, The Contractor Shall Survey The Construction Area And Confirm The Levels. He Shall Immediately Notify The Engineer Of Any Discrepancies And Shall Agree With The Engineer Any Amended Values On The Plan. All Stations And Reference Points Shall Be Clearly Marked And Protected To The Satisfaction Of The Engineer. All Working Benchmarks Shall Be Near Major/medium Structure Sites. Accurate Establishment Of The Centerlines Based On The Drawing Is Required. The Existing Profile And Cross-section Shall Be Jointly Taken With The Engineer. Iii. Excavation Foundation Trench Shall Be Dug To The Exact Width And Depth And Levels As Indicated In The Drawings. Sides Of The Trenches Shall Be Vertical. In Case Soil Does Not Permit Vertical Sides, The Contractor Shall Protect The Sides With Timber Shoring. Excavated Earth Shall Not Be Placed Within 1.5 Meter Of The Edge Of The Trench. No Excavation Or Foundation Work Shall Be Filled In Or Covered Up Before The Inspection And Approval Of The Project Engineer. Iv. Backfilling, Embankment With Compaction And Gravel Bedding Use Earth Or Sand Free From Waste And Objectionable Materials. Place Backfill And Embank In Uniform Horizontal Layer Not More 150mm Thick At A Time, Puddle And Tamper Each Layer As Required To Make Firm Adequate Compaction. Fill Bottom Of Excavation For Structured Foundation With At Least 100mm Thick Gravel Before Placing Reinforcing Steel Bars And Pouring Concrete. V. Concrete, Masonry And Plastering Works A. General: All Concrete Works To Be Done Herein Shall Be In Accordance With Aci Requirement And/ Or Standard Specifications As Adopted By The Government. B. Cement Shall Be Portland Cement (type1) With 40 Kgs/bag. C. Fine Aggregates Shall Be Clean Hold River Sand, Free From Injurious Amount Of Clay, Loam And Vegetable Matter. D. Coarse Aggregates Shall Be River Run Gravel Or Broken Stones. The Maximum Size Shall Be 1/5 Of The Nearest Dimensions Between Side Forms Of The Concrete Members Or ¾ The Maximum Clear Spacing Between Reinforcing Bars. E. Reinforcing Bars: Reinforcing Bars Shall Be Intermediate Grade And Deformed And Shall Have Minimum Yield Strength Of 275 Mpa (40,000 Psi) F. The Wires Shall Be Locally Produced G.i. Wire Gauge No. 16. G. Placing Reinforcement Provide Bars, Wire Fabrics, Wire Ties, Supports And Other Devices Necessary To Install And Secure Reinforcement. Reinforcement Shall Not Contain Rust, Scale Oil, Grease Clay And Foreign Substances That Would Reduce The Bond. Rusting Of Reinforcement Is A Basis Of Rejection If The Effective Cross-sectional Area Of The Normal Weight Per Foot Of The Reinforcement Has Been Reduced To Less Than Specified In Paragraph Entitled “reinforcing Bars”. Remove Loose Rust Prior To Placing Of Steel. Splices Shall Be Approved Prior To Use. Do Not Splice At Points Of Maximum Stress. Overlapped Welded Wire Fabric The Spacing Of The Cross Wires, Plus 50 Mm (2 Inches). H. Concrete Hollow Blocks: 1. For Walls And Partitions, Use Chb Or Its Equivalent. 2. Minimum Comprehensive Strength Shall Be 700 Psi. I. All Concrete Cured For Least Seven (7) Days To Twenty-eight (28) Days If Possible After Placement To Attain The Required Strength Of Concrete. J. Removal Of Forms: Forms Shall Be Removed In Such A Manner As Not To Impair The Safety And Serviceability Of The Structures. K. Proportions Of All Materials Entering Into Concrete Shall Be Of Class “a”. L. Mixture For Concrete Slab: Thickness Of Slab Shall Be 200mm Thick. A Mixture Of Washed Sand, Screened Gravel And Portland Cement. M. Mixture For Plastering: Thickness Of Plaster Shall Be 16mm Thick. A Mixture Of Washed Sand And Portland Cement. Vi. Wall Installation Use 0.5mm Thk G.i. Rib-type Longspan Prepainted For Wall Cladding And 2” X 4” X 1.5mm X 6m C-purlins For Wall Cladding Framing. Vii. Roofing Works And Framing A. Roofing Must Be 0.5mm Pre-painted Rib-type Long Span With Compatible Ridge Roll, And Fascia With Skylight Roof. B. For Full Truss 1 & 2 And Half Truss 1, Trusses And Rafter Shall Be 2” X 2” X 5mm Thk Angle Bars For Top And Bottom Chord And 1-1/2” X 1-1/2” X 4.5mm Thk Angle Bar For All Web Members. C. For Half Truss 2, Use 2” Ø G.i. Pipe Schedule 40 For All Members. D. For Girt Use 2” X 2” X 5mm Thk Angle Bars For Top And Bottom Chord And 1-1/2” X 1-1/2” X 4.5mm Thk Angle Bar For All Web Members. E. For Fascia Frame Use 1” X 1” X 3/16” Thk Angle Bar For All Members. F. Use 2” X 6” X 1.5mm Thk C-purlins. Please Refer To The Attached Plan For Specifications. G. Fasten Framing Members Together By Welding Or By Using Bolts. Welding Shall Conform To Aws D1.3 Welding Procedure. H. All Metal Surfaces Must Be Metal Primer Red Oxide Painted. Ix. Ceiling Works All Materials Shall Be Of Kind And Size Specified On Plans. Interior And Exterior Ceiling Will Use 0.4mm Thk Spandrel Ceiling With A Carrying Channel, Metal Furring And Wall Angle For Corner As Main Frame. Use Blind Rivets To Fix The Spandrel To The Main Frame. X. Tile Works Tiles Should Be Installed In Comfort Room Using A 0.60m X 0.60m Polished Tiles. For Wall Tiles, Height Should Be 1.5m From The Finished Floor Line. Shall Have Tile Trim At The Edges And Provide Tile Grout Between Tiles. It Should Be Done By A Tile Setter To Ensure Quality Workmanship. Xi. Installation Of Doors A. For Sliding Door, Use G.a. 18 Plain Sheet For Door And 2” Ø G.i. Pipe Schedule 40 For The Frame With Heavy Duty Rack And Complete Accessories Including Installation. B. For Louver Windows, Use 0.5mm Plain Sheet Bended Louver Panels And 2” X 4” Rectangular Tube Framing With Complete Accessories Including Installation. C. For Comfort Room, Use 0.7m X 2.1m Pvc Door With Complete Accessories, Louver, Dr Pad And Lockset, And Use 6mm Thk X 0.4m X 0.6m Clear Glass Window On Analok Aluminum Tubular Frame With Complete Accessories. D. Use 0.9m X 2.1m Swing Panel Door, Kiln Dried Panel Door With 3mm Thk Lead Sheet With Heavy Duty Door Knob And Hinges On 2” X 6” Wooden Door Jamb. E. For Doors And Windows, Use #6, 4.5mm Steel Matting 2” X 2” X 4’ X 8’ And Use 3/16” X 1” X 6m Flat Bar And 2” Ø G.i. Pipe Schedule 40 For Framing. Xii. Plumbing Works All Works Shall Be Done In Accordance With The Provisions Of The Latest Edition Of The Plumbing Code And Local Ordinance. All Works Shall Be Done Under The Direct Supervision Of A Duly Licensed Master Plumber. See Attached Plans For Specifications. A. Use 1"ø Pvc Blue X 3m With Fittings And Accessories For Connection From Main Source Of Water To The Building For The Operation Of Comfort Room. B. Use 1/2"ø Pvc Blue X 3m With Fittings And Accessories For Faucets. C. Use 2"ø Pvc Sanitary X 3m S1000 With Fittings And Accessories For Floor Drain. D. Use 4"ø Pvc Sanitary X 3m S1000 With Fittings And Accessories For Septic Tank. Xiii. Painting Works I. Complete Painting Covers All Concrete Surfaces And Other Interior Parts Except Otherwise Specified. Ii. Apply Three (3) Coats As Paint Follows: 1st Coat = Sealer 2nd Coat = Primers 3rd Coat = Color Selected And Approved (2 Coats) Iii. Paint Shall Be Thoroughly Dry Before Applying The Succeeding Coat No Exterior Painting Shall Be Done With The Surface To Be Applied Is Damp Or During Rainy Weather Iv. Proper Works At All Times By Suitable Materials As Work Progress, Upon Completion Of Work, Remove All Paints Stains And Varnish Spots From Floors And Other Surfaces, Leave Work Clean And In Acceptable Condition. B. Construction Of Catch Basin And Septic Tank I. Excavation Foundation Trench Shall Be Dug To The Exact Width And Depth And Levels As Indicated In The Drawings. Sides Of The Trenches Shall Be Vertical. In Case Soil Does Not Permit Vertical Sides, The Contractor Shall Protect The Sides With Timber Shoring. Excavated Earth Shall Not Be Placed Within 1.5 Meter Of The Edge Of The Trench. No Excavation Or Foundation Work Shall Be Filled In Or Covered Up Before The Inspection And Approval Of The Project Engineer. Ii. Concrete, Masonry And Plastering Works A. General: All Concrete Works To Be Done Herein Shall Be In Accordance With Aci Requirement And/ Or Standard Specifications As Adopted By The Government. B. Cement Shall Be Portland Cement (type1) With 40 Kgs/bag. C. Fine Aggregates Shall Be Clean Hold River Sand, Free From Injurious Amount Of Clay, Loam And Vegetable Matter. D. Coarse Aggregates Shall Be River Run Gravel Or Broken Stones. The Maximum Size Shall Be 1/5 Of The Nearest Dimensions Between Side Forms Of The Concrete Members Or ¾ The Maximum Clear Spacing Between Reinforcing Bars. E. Reinforcing Bars: Reinforcing Bars Shall Be Intermediate Grade And Deformed And Shall Have Minimum Yield Strength Of 275 Mpa (40,000 Psi) F. The Wires Shall Be Locally Produced G.i. Wire Gauge No. 16. G. Placing Reinforcement Provide Bars, Wire Fabrics, Wire Ties, Supports And Other Devices Necessary To Install And Secure Reinforcement. Reinforcement Shall Not Contain Rust, Scale Oil, Grease Clay And Foreign Substances That Would Reduce The Bond. Rusting Of Reinforcement Is A Basis Of Rejection If The Effective Cross-sectional Area Of The Normal Weight Per Foot Of The Reinforcement Has Been Reduced To Less Than Specified In Paragraph Entitled “reinforcing Bars”. Remove Loose Rust Prior To Placing Of Steel. Splices Shall Be Approved Prior To Use. Do Not Splice At Points Of Maximum Stress. Overlapped Welded Wire Fabric The Spacing Of The Cross Wires, Plus 50 Mm (2 Inches). H. Concrete Hollow Blocks: 1. For Walls And Partitions, Use Chb Or Its Equivalent. 2. Minimum Comprehensive Strength Shall Be 700 Psi. I. All Concrete Cured For Least Seven (7) Days To Twenty-eight (28) Days If Possible After Placement To Attain The Required Strength Of Concrete. J. Removal Of Forms: Forms Shall Be Removed In Such A Manner As Not To Impair The Safety And Serviceability Of The Structures. K. Proportions Of All Materials Entering Into Concrete Shall Be Of Class “b”. L. Mixture For Concrete Slab: Thickness Of Slab Shall Be 100mm Thick. A Mixture Of Washed Sand, Screened Gravel And Portland Cement. M. Mixture For Plastering: Thickness Of Plaster Shall Be 16mm Thick. A Mixture Of Washed Sand And Portland Cement. Iii. Pipings Use 6” Ø Pvc Sanitary Pipe X 3m S1000 With Complete Fittings And Accessories. It Should Be Installed By A Skilled Plumber To Ensure Quality Workmanship. Please Refer To The Attached Plan For Specifications. C. Installation Of Logo Use 1.5m Ø X 4” Thk Stainless 202 Round Logo For The Iloilo Provincial Government Seal With Installation. It Should Be Installed By A Skilled Worker To Ensure Quality Workmanship. Please Refer To The Attached Plan For Specifications. D. Installation Of Electrical Works And Fire Alarm System Electrical Works The Electrical Installation Shall Be Done In Accordance With The Approved Plans And Under The Direct Supervision And Control Of A Professional Electrical Engineer And Or Registered Electrical Engineer. 1. All Electrical Works And Materials Shall Conform To The Provisions Of The Latest Edition Of The Philippine National Electrical Code. The Rules, Regulations And Requirements Of The Local Authorities That Have Jurisdiction Over The Project, And Of The Local Utility Companies For Electrical And Communication. 2. Power Service To The Building Shall Be 230 Vac, 3ø + Ground, & 60hz 3. Unless Otherwise Indicated, All Wiring Method Shall Be Done In Rigid Steel Conduit (rsc), Condulet Fittings & Metal Boxes. 4. All Electrical Materials/equipment To Be Used Shall Be New And Of The Approved Type In Accordance With Drawings And Specifications For Both Location And Purpose. 5. Unless Otherwise Specified In The Plans, The Minimum Size Of The Wire And Conduit To Be Used Shall Be 3.5mm2 Thhn And 20mmø, Respectively. All Wires Shall Be Insulated For 600v And Except As Specified In The Plan. 6. All Non-current Carrying Metal Parts Of Electrical Equipments, Panel Board & Other Devices Shall Be Effectively Bonded To The Ground. 7. The Entire Electrical Works Herein Shall Be Done Under Direct Supervision Of A Competent Registered Electrical Engineer. 8. Where So Required, Provide All Fittings, Condulets/boxes For All Systems. 9. Use Wire With Color Red For Line 1, Yellow For Line 2, Blue For Line 3, And Green For Line Ground. 10. Electrical Works/system Shall Be Commissioned With The Present Of Project Engineer. Fire Alarm System 1. Installation Of Fire Detection And Alarm System (fdas) Will Be In Accordance With The National Fire Protection Association (nfpa) 72 And 70 And Local Fire Code Of The Philippines. 2. All Wiring Will Be In Accordance With Fdas Manufacturer’s Recommendations To Properly Conduct The Circuit Current: -awg #16 Tf Wire Signaling Line Circuit -awg #16 Tf Wire 24vdc Auxiliary Circuit 3. Smoke Detectors And Heat Detectors Are To Be Installed According To The Recommended Spacing As Per Nfpa 72 And Manufacturer’s Listing: -smoke Detector 9.1m (area Coverage 0.7 Times Listed Spacing) -heat Detector 13.9m (area Coverage 0.7 Times Listed Spacing) 4. All Audible Devices Is At Least 15dba Above The Average Ambient Sound 5. Wiring Method Will Be In Electrical Metal Tubing (imc) And All Electrical Box Are Galvanized Ga #16 Minimum. 6. All Materials To Be Used Are New And Will Be Installed In Application For Which They Are Intended. Section Vii. Drawings Annex A – Architectural Design Annex B- Project Billboard Plan Section Viii. Bill Of Quantities Bid No. Agr- 25-149-b Item Description Quantity Unit Unit Cost Total Cost No. A. Construction Of Warehouse And Drying Facility I. Mobilization/demobilization 1.00 L.s. Pesos And Ctvs. (p ) / L.s. P Ii. Clearing, Grubbing & Staking 1080.00 Sq.m. Pesos And Ctvs. (p ) / Sq.m P Iii. Excavation Works 265.90 Cu.m. Pesos And Ctvs. (p ) / Cu.m P Iv. Backfilling 155.38 Cu.m. Pesos And Ctvs. (p ) / Cu.m P V. Embankment With Compaction 2067.00 Cu.m. Pesos And Ctvs. (p ) / Cu.m P Vi. Concrete Works A. Concreting 349.07 Cu.m. Pesos And Ctvs. (p ) / Cu.m P Item Description Quantity Unit Unit Cost Total Cost No. B. Gravel Bedding 151.01 Cu.m. Pesos And Ctvs. (p ) / Cu.m. P C. Steelworks 28,624.00 Kgs. Pesos And Ctvs. (p ) / Kgs. P D. Formworks 1,415.66 Sq.m. Pesos And Ctvs. (p ) / Sq.m P Vii. Masonry Works 186.12 Sq.m. Pesos And Ctvs. (p ) / Sq.m P Viii. Plastering Works 1,249.04 Sq.m. Pesos And Ctvs. (p ) /sq.m. P Ix. Wall Installation 764.47 Sq.m. Pesos And Ctvs. (p ) /sq.m. P X. Roof Framing 17,556.15 Kgs. Pesos And Ctvs. (p ) /kgs. P Item Description Quantity Unit Unit Cost Total Cost No. Xi. Roofing Works 619.50 Sq.m. Pesos And Ctvs. (p ) /sq.m. P Xii. Ceiling Works 22.33 Sq.m. Pesos And Ctvs. (p ) /sq.m. P Xiii. Tile Works 14.38 Sq.m. Pesos And Ctvs. (p ) /sq.m. P Xiv. Installation Of Doors And Windows A. Sliding Door (4.95m X 4.8m, 3.00 Units Pesos G.a. 18 Plain Sheet And 2” Ø G.i. Pipe S-40) W/ Heavy Duty Rack And Complete Accessories With Installation And Ctvs. (p ) /unit P B. Louver Windows (4.7m X Tube 18.00 Units Pesos 0.6mm, 2” X 4” Rectangular Framing And 0.5mm Plain Sheet Bended Louver Panels) W/ Complete Accessories With And Ctvs. Installation (p ) /unit P C. Panel/pvc/steel Matting Door 13.65 Sq.m. Pesos And Window And Clear Glass Window Installation And Ctvs. (p ) /sq.m. P Item Description Quantity Unit Unit Cost Total Cost No. Xv. Plumbing Works 1.00 L.s. Pesos And Ctvs. (p ) /l.s. P Xvi. Painting Works 3,727.18 Sq.m. Pesos And Ctvs. (p ) /sq.m. P B. Construction Of Catch Basin And Septic Tank I. Excavation Works 16.86 Cu.m. Pesos And Ctvs. (p ) /cu.m. P Ii. Concrete Works A. Concreting 3.30 Cu.m. Pesos And Ctvs. (p ) /cu.m. P B. Steel Works 178.00 Kgs. Pesos And Ctvs. (p ) /kgs. P C. Formworks 21.90 Sq.m. Pesos And Ctvs. (p ) /sq.m. P Iii. Masonry Works 40.60 Sq.m. Pesos And Ctvs. (p ) /sq.m. P Itemno. Description Quantity Unit Unit Cost Total Cost Iv. Plastering Works 77.90 Sq.m. Pesos And Ctvs. (p ) /sq.m. P V. Pipings 1.00 L.s. Pesos And Ctvs. (p ) /l.s. P C. Installation Of Logo (1.5m Ø 1.00 L.s. Pesos X 4” Thk Stainless 202 Round Logo With Installation) And Ctvs. (p ) /l.s. P D. Installation Of Electrical Works & Fire Alarm System I. Installation Of Primary Lines, & 1.00 L.s. Pesos Metering & Three (3) Units Of 25 Kva Distribution Transformers (ileco Ii Works Recommended Materials) And Ctvs. (p ) /l.s. P Ii. Secondary Power Distribution 1.00 L.s. Pesos System And Ctvs. (p ) /l.s. P Iii. Fire Alarm System 1.00 L.s. Pesos And Ctvs. (p ) /l.s. P Total Bid Cost In Words Summary Of Costs Item No. Bid Amount A. Construction Of Warehouse And Drying Facility I. Mobilization/demobilization ₱ _____________________________ Ii. Clearing, Grubbing & Staking ₱ _____________________________ Iii. Excavation Works ₱ _____________________________ Iv. Backfilling ₱ _____________________________ V. Embankment With Compaction ₱ _____________________________ Vi. Concrete Works A. Concreting ₱ _____________________________ B. Gravel Bedding ₱ _____________________________ C. Steelworks ₱ _____________________________ D. Formworks ₱ _____________________________ Vii. Masonry Works ₱ _____________________________ Viii. Plastering Works ₱ _____________________________ Ix. Wall Installation ₱ _____________________________ X. Roof Framing ₱ _____________________________ Xi. Roofing Works ₱ _____________________________ Xii. Ceiling Works ₱ _____________________________ Xiii. Tile Works ₱ _____________________________ Xiv. Installation Of Doors And Windows A. Sliding Door (4.95m X 4.8m, G.a. 18 Plain Sheet And 2"ø G.i. Pipe S-40) W/ Heavy Duty Rack And Complete Accessories With Installation ₱ _____________________________ B. Louver Windows (4.7m X 0.6m, 2" X 4" Rectangular Tube Framing And 0.5mm Plain Sheet Bended Louver Panels) W/ Complete Accessories With Installation ₱ _____________________________ C. Panel/pvc/steel Matting Door And Window And Clear Glass Window Installation ₱ _____________________________ Xv. Plumbing Works ₱ _____________________________ Xvi. Painting Works ₱ _____________________________ B. Construction Of Catch Basin And Septic Tank I. Excavation Works ₱ _____________________________ Ii. Concrete Works A. Concreting ₱ _____________________________ B. Steelworks ₱ _____________________________ C. Formworks ₱ _____________________________ Iii. Masonry Works ₱ _____________________________ Iv. Plastering Works ₱ _____________________________ V. Pipings ₱ _____________________________ C. Installation Of Logo ₱ _____________________________ D. Installation Of Electrical Works & Fire Alarm System I. Installation Of Primary Lines, Metering & Three (3) Units Of 25 Kva Distribution Transformers (ileco Ii Works & Recommended Materials) ₱ _____________________________ Ii. Secondary Power Distribution System ₱ _____________________________ Iii. Fire Alarm System ₱ _____________________________ Total Bid Amount ₱ _____________________________ Section Ix. Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages) In Accordance With Section 8.5.2 Of The Irr; (b) 1. Registration Certificate From Sec, Department Of Trade And Industry (dti) For Sole Proprietorship Or Cda For Cooperatives, Or Any Proof Of Such Registration. 2. Mayor’s Permit Issued By The City Or Municipality – Where The Principal Place Of Business Of The Prospective Bidder Is Located; 3. Tax Clearance Per Executive Order 398,series Of 2005,a S Finally Reviewed And Approved By The Bir 4. Audited Financial Statements, Showing, Among Others, The Prospective Total And Current Assets And Liabilities, Stamped “received” By The Bir Or Its Duly Accredited And Authorized Institutions For The Preceding Calendar Year Which Should Not Be Earlier Than Two(2) Years From The Date Of Bid Submission; For The Type And Cost Of The Contract To Be Bid Technical Documents ⬜ (b) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (c) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided Under The Rules; And ⬜ (d) Special Pcab License In Case Of Joint Ventures; And Registration For The Type And Cost Of The Contract To Be Bid; And ⬜ (e) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission; Or Original Copy Of Notarized Bid Securing Declaration; And (f) Project Requirements, Which Shall Include The Following: ⬜ A. Organizational Chart For The Contract To Be Bid; ⬜ B. List Of Contractor’s Key Personnel (e.g., Project Manager, Project Engineers, Materials Engineers, And Foremen), To Be Assigned To The Contract To Be Bid, With Their Complete Qualification And Experience Data; ⬜ C. List Of Contractor’s Major Equipment Units, Which Are Owned, Leased, And/or Under Purchase Agreements, Supported By Proof Of Ownership Or Certification Of Availability Of Equipment From The Equipment Lessor/vendor For The Duration Of The Project, As The Case May Be; And ⬜ (g) Original Duly Signed Omnibus Sworn Statement (oss); And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (h) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc). Class “b” Documents ⬜ (i) If Applicable, Duly Signed Joint Venture Agreement (jva) In Accordance With Ra No. 4566 And Its Irr In Case The Joint Venture Is Already In Existence; Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (j) Original Of Duly Signed And Accomplished Financial Bid Form; And Other Documentary Requirements Under Ra No. 9184 ⬜ (k) Original Of Duly Signed Bid Prices In The Bill Of Quantities; And ⬜ (l) Duly Accomplished Detailed Estimates Form, Including A Summary Sheet Indicating The Unit Prices Of Construction Materials, Labor Rates, And Equipment Rentals Used In Coming Up With The Bid; And ⬜ Cash Flow By Quarter. Bid Form For The Procurement Of Infrastructure Projects [shall Be Submitted With The Bid] Bid Form Date : Project Identification No. : To: [name And Address Of Procuring Entity] Having Examined The Philippine Bidding Documents (pbds) Including The Supplemental Or Bid Bulletin Numbers [insert Numbers], The Receipt Of Which Is Hereby Duly Acknowledged, We, The Undersigned, Declare That: A. We Have No Reservation To The Pbds, Including The Supplemental Or Bid Bulletins, For The Procurement Project: [insert Name Of Contract]; B. We Offer To Execute The Works For This Contract In Accordance With The Pbds; C. The Total Price Of Our Bid In Words And Figures, Excluding Any Discounts Offered Below Is: [insert Information]; D. The Discounts Offered And The Methodology For Their Application Are: [insert Information]; E. The Total Bid Price Includes The Cost Of All Taxes, Such As, But Not Limited To: [specify The Applicable Taxes, E.g. (i) Value Added Tax (vat), (ii) Income Tax, (iii) Local Taxes, And (iv) Other Fiscal Levies And Duties], Which Are Itemized Herein And Reflected In The Detailed Estimates, F. Our Bid Shall Be Valid Within A Period Stated In The Pbds, And It Shall Remain Binding Upon Us At Any Time Before The Expiration Of That Period; G. If Our Bid Is Accepted, We Commit To Obtain A Performance Security In The Amount Of [insert Percentage Amount] Percent Of The Contract Price For The Due Performance Of The Contract, Or A Performance Securing Declaration In Lieu Of The Allowable Forms Of Performance Security, Subject To The Terms And Conditions Of Issued Gppb Guidelines12 For This Purpose; H. We Are Not Participating, As Bidders, In More Than One Bid In This Bidding Process, Other Than Alternative Offers In Accordance With The Bidding Documents; I. We Understand That This Bid, Together With Your Written Acceptance Thereof Included In Your Notification Of Award, Shall Constitute A Binding Contract Between Us, Until A Formal Contract Is Prepared And Executed; And J. We Understand That You Are Not Bound To Accept The Lowest Calculated Bid Or Any Other Bid That You May Receive. K. We Likewise Certify/confirm That The Undersigned, Is The Duly Authorized Representative Of The Bidder, And Granted Full Power And Authority To Do, Execute 12 Currently Based On Gppb Resolution No. 09-2020 And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For The [name Of Project] Of The [name Of The Procuring Entity]. L. We Acknowledge That Failure To Sign Each And Every Page Of This Bid Form, Including The Bill Of Quantities, Shall Be A Ground For The Rejection Of Our Bid. Name: Legal Capacity: Signature: Duly Authorized To Sign The Bid For And Behalf Of: Date: Bid Securing Declaration Form [shall Be Submitted With The Bid If Bidder Opts To Provide This Form Of Bid Security] Republic Of The Philippines) City Of ) S.s. Bid Securing Declaration Project Identification No.: [insert Number] To: [insert Name And Address Of The Procuring Entity] I/we, The Undersigned, Declare That: 1. I/we Understand That, According To Your Conditions, Bids Must Be Supported By A Bid Security, Which May Be In The Form Of A Bid Securing Declaration. 2. I/we Accept That: (a) I/we Will Be Automatically Disqualified From Bidding For Any Procurement Contract With Any Procuring Entity For A Period Of Two (2) Years Upon Receipt Of Your Blacklisting Order; And, (b) I/we Will Pay The Applicable Fine Provided Under Section 6 Of The Guidelines On The Use Of Bid Securing Declaration, Within Fifteen (15) Days From Receipt Of The Written Demand By The Procuring Entity For The Commission Of Acts Resulting To The Enforcement Of The Bid Securing Declaration Under Sections 23.1(b), 34.2, 40.1 And 69.1, Except 69.1(f),of The Irr Of Ra No. 9184; Without Prejudice To Other Legal Action The Government May Undertake. 3. I/we Understand That This Bid Securing Declaration Shall Cease To Be Valid On The Following Circumstances: A. Upon Expiration Of The Bid Validity Period, Or Any Extension Thereof Pursuant To Your Request; B. I Am/we Are Declared Ineligible Or Post-disqualified Upon Receipt Of Your Notice To Such Effect, And (i) I/we Failed To Timely File A Request For Reconsideration Or (ii) I/we Filed A Waiver To Avail Of Said Right; And C. I Am/we Are Declared The Bidder With The Lowest Calculated Responsive Bid, And I/we Have Furnished The Performance Security And Signed The Contract. In Witness Whereof, I/we Have Hereunto Set My/our Hand/s This Day Of [month] [year] At [place Of Execution]. [insert Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Affiant [jurat] [format Shall Be Based On The Latest Rules On Notarial Practice] Omnibus Sworn Statement (revised) [shall Be Submitted With The Bid] Republic Of The Philippines ) City/municipality Of ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. [select One, Delete The Other:] [if A Sole Proprietorship:] I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. [select One, Delete The Other:] [if A Sole Proprietorship:] As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached Duly Notarized Special Power Of Attorney; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. [select One, Delete The Rest:] [if A Sole Proprietorship:] The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Partnership Or Cooperative:] None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Corporation Or Joint Venture:] None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: A. Carefully Examining All Of The Bidding Documents; B. Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C. Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D. Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. 9. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This Day Of , 20 At , Philippines. [insert Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Affiant [jurat] [format Shall Be Based On The Latest Rules On Notarial Practice]

Purchaser Name: Ministry Of Manpower ministry Headquarter | Invitation To Tender For The Supply, Delivery And Installation Of Furniture, Fittings And Equipment At Tukang Pbd For A Period Of One (1) Year. Loading

Description: Hiring Of Manpower For Safai And Surksha Karamchari.

Details: Description Description Republic Of The Philippines Danao City Brgy.poblacion Invitation To Apply For Eligibility And To Bid Paraphernalia/ Item For Operation Tuli, 2025 @ Brgy. Poblacion, Danao City The Brgy.poblacion, Tends To Apply The Sum Of Php74,391.75 Being Approved Budget For The Contract (abc) To Payments Under The Contract For Paraphernalia/ Item For Operation Tuli, 2025 @ Brgy.poblacion, Danao City. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At The Bid Opening. The Barangay Poblacion Now Invites Sealed Bids From Eligible Bidder To Participate In The Public Bidding Of The Paraphernalia/ Item For Operation Tuli, 2025 @ Brgy. Poblacion, Danao City As Follows; Seq. Qty. Item Description Estimated Unit Cost Estimated Cost 1. 400 Bottles Amoxicillin (25mg/ml) 48.75 19,500.00 2. 5 Boxes Amoxicillin(250mg/capsule) 345.75 1,728.75 3. 2 Boxes Surgical Gloves (no.7) 1,350.00 2,700.00 4. 2 Boxes Surgical Gloves (no.8) 1,350.00 2,700.00 5. 2 Boxes Surgical Gloves (no.9) 1,350.00 2,700.00 6. 1 Box Syringe (3ml/g23x1”) 546.00 546.00 7. 20 Packs Cotton Balls 263.25 5,265.00 8. 2 Gallons Betadine Solution 1,550.00 3,100.00 9. 1 Gallon Cidex 4,875.00 4,875.00 10. 2 Boxes Sterile Gauze Pad (4x4) 468.00 936.00 11. 15 Packs Non-sterile Gauze Pad (4x4) 360.75 5,411.25 12. 100 Pcs. Chrmic Suture (3-0) 85.90 8,595.00 13. 12 Gallon Alcohol 450.00 5,400.00 14. 30 Bottles Alcohol (liter) 214.50 6,435.00 15. 1 Box Transpore Bandage 875.00 875.00 16. 8 Packs Manila Paper 185.25 1,482.00 17. 20 Roll Garbage Bag (xl) 87.75 1,755.00 18. 1 Dozen Detergent Powder 87.75 87.75 19. 6 Pcs. Toothbrush (for Cleaning) 50.00 300.00 Php74,391.75 Delivery Of The Goods Is Required Not Later Than April 28, 2025.the Description Of An Eligible Bidders Is One Who Have Submitted The Following Requirements: Eligibilty Requirements To Be Submitted On March 28- April 04, 2025 At 2:00 P.m. (note: All These Documents Should Be In A Separate Envelope.) 1. Dti Business Name Registration Or Sc Registration 2. Tax Clearance 3. Business Permit 4. Tax Identification Number 5. Authority Of The Signatory Duly Notarized If (single Proprietorship) / Secretary Certificate If Corp. 6. Omnibus Sworn Statement Duly Notarized 7. Valid Joint Venture Agreement 8. Articles Of Partnership Or Incorporation 9. On-going And Awarded Contracts 10. Completed Similar Contracts 11. Copies Of End-user’s Acceptance Letters For Completed Contracts 12. Specification Of Whether Or Not The Prospective Bidder Is A Manufacturer, Supplier, Or Distributor Duly Notarized 13. Audited Financial Statement. 14. Nfcc Duly Notarized Or Credit Line At Least 10% Of The Abc 15. Geps Registration Submission And Receipts Of Bids On April 04, 2025 At 1:30 O’clock In The Afternoon At The Bids And Awards Committee Office At Brgy. Poblacion, Danao City. Technical Envelope: 1. Bid Security -2% Cash/ Cashier’s Check/manager’s Check/letter Of Credit/bank Draft/guarantee (based On Abc)5% Gsis Bond (based On The Abc)/bid Securing Declaration 2. Authority Of The Signatory Duly Notarized If (single Proprietorship) / Secretary Certificate If Corp. 3. Production / Delivery Schedule 4. Manpower Requirements 5. After-sales/parts, If Applicable. 6. Technical Specification Of The Products 7. Commitment To Extend A Credit Line / Nfcc At Least 10% Of The Abc Duly Notarized. 8. Omnibus Sworn Statement Duly Notarized Financial Envelope: 1. Bid Prices In The Bill Of Quantities In The Prescribed Bid Form. 2. The Recurring And The Maintenance Costs, If Applicable. Instructions To Bidders: 1.) For Winning Bidders, Performance Security Shall Be Required To Guarantee The Faithful Performance Upon Signing The Contracts It Maybe 5% Of The Contract Prices On A Form Of Cash/manager’s Check Or 30% Gsis Bond. 2.) Retention In The Amount Equivalent To At Least 10% Of Every Progress Payment Made Or Special Bank Guarantee Equivalent To At Least 10% Of The Total Contract Price. The Said Amount Shall Be Released Only After The Lapse Of The Warranty Period,3, Months In Case Of Supplies And 1year In The Case Of Purchase Of Equipment. 3.) All Particulars Relative To Pre-qualifications, Biddings, Evaluation Of Bids And Awards Of Contracts Shall Be Governed By The Provision Of Ra 9184 And Other Rules Regulation As Maybe Applicable. 4.) The City Government Reserves The Right To Reject Any/or All Bids, To Waive Any Defect, Informalities Therein And To Award To The Bidders Upon Evaluation By The Bids And Awards Committee (bac) The Bid That Are More Advantageous To The City. 5.)5% Value Added Tax (vat) Withheld Of The Contract Price.1% Creditable Income Tax Of Contract Price. 6.) Bidders Should Fill-up All Items; Otherwise In Case Their Quotation Is Incomplete They Are Automatically Disqualified. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using As Specified In The Implementing Rules And Regulations Part ! (irr-a) Of Republic Act No. 9184 (r.a. 9184), Otherwise Known As The Government Procurement Reform Act,and Is Restricted To Organization With At Least Sixty Percent (60%)interest Or Outstanding Capital Stock Belongings To Citizen Of The Philippines,as Specified In Republic Act 5183 (r.a.5183).only Bids From Bidders Who Pass The Eligibility Check Will Be Opened.the Process For The Eligibility Check Is Described In Section Ll Of The Bidding Documents,itb.the Bidder With The Lowest Calculated Bid (lcb) Shall Advance To The Post-qualification Stage In Order To Finally Determine Who’s Responsiveness To The Technical And Financial Requirements Of The Project.the Contract Shall Then Be Awarded To The Lowest Calculated And Responsive Bidder (lcrb) Who Was Determined As Such During The Post-qualification Procedure. Very Truly Yours, Benjamin M. Batiquin Jr. Brgy.bac Chairman Poblacion,danao City

Details: Description Bids And Awards Committee Iloilo Provincial Government Procurement Of Multi-purpose Vehicle Bid No. Acc-24-1846-b(rebid2) Philippine Bidding Documents Sixth Edition July 2020 Table Of Contents Section I. Invitation To Bid……………………………………………………..3 Section Ii. Instructions To Bidders………………………………………..…...5 1. Scope Of Bid ………………………………………………………………………. 5 2. Funding Information………………………………………………………………. 5 3. Bidding Requirements ……………………………………………………………. 5 4. Corrupt, Fraudulent, Collusive, And Coercive Practices 5 5. Eligible Bidders…………………………………………………………………… 5 6. Origin Of Goods ………………………………………………………………….. 6 7. Subcontracts ……………………………………………………………………… 6 8. Pre-bid Conference ………………………………………………………………. 7 9. Clarification And Amendment Of Bidding Documents …………………………… 7 10. Documents Comprising The Bid: Eligibility And Technical Components …………. 7 11. Documents Comprising The Bid: Financial Component …………………………... 7 12. Bid Prices …………………………………………………………………………. 8 13. Bid And Payment Currencies ……………………………………………………… 8 14. Bid Security ………………………………………………………………………. 8 15. Sealing And Marking Of Bids ……………………………………………………… 9 16. Deadline For Submission Of Bids …………………………………………………. 9 17. Opening And Preliminary Examination Of Bids ………………………………….. 9 18. Domestic Preference ……………………………………………………………… 9 19. Detailed Evaluation And Comparison Of Bids ……………………………………. 9 20. Post-qualification ………………………………………………………………… 10 21. Signing Of The Contract …………………………………………………………… 10 Section Iii. Bid Data Sheet …………………………………………………..11 Section Iv. General Conditions Of Contract ……………………...………..12 1. Scope Of Contract ………………………………………………………………… 12 2. Advance Payment And Terms Of Payment ……………………………………….. 12 3. Performance Security ……………………………………………………………. 12 4. Inspection And Tests ……………………………………………………………… 12 5. Warranty …………………………………………………………………………. 13 6. Liability Of The Supplier ………………………………………………………….. 13 Section V. Special Conditions Of Contract ………………………………….14 Section Vi. Schedule Of Requirements ……………………………………....16 Section Vii. Technical Specifications …………………………………………16 Section Viii. Checklist Of Technical And Financial Documents …………..18 Section I. Invitation To Bid Purchase Of Multi-purpose Vehicle Bid No. Acc-24-1846-b(rebid2) 1. The Iloilo Provincial Government Through The Supplemental Budget No.1 Cy 2024 Capital Outlay Intends To Apply The Sum Of One Million Nine Hundred Thousand Pesos (php 1,900,000.00) Being The Abc To Payments Under The Contract For The Purchase Of Multi-purpose Vehicle Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Iloilo Provincial Government Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By 30 Calendar Days Upon Receipt Of The Notice To Proceed (ntp). Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Bids And Awards Committee Secretariat Of The Iloilo Provincial Government And Inspect The Bidding Documents At The Address Given Below During 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On March 28, 2025 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (php5000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Iloilo Provincial Government Will Hold A Pre-bid Conference On April 08, 2025 At The 5th Floor Bac Secretariat Office, Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City And/or Through Video Conferencing Or Webcasting, Upon Request At Least Three (3) Days Before The Pre-bid Conference, Via Zoom Or Other Videoconferencing Portals, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The 5th Floor Bac Secretariat Office, Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City On Or Before April 24, 2025 At 9:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On April 24, 2025 At 9:01 A.m. At The 5th Floor Bac Secretariat Office, Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. A. The Participating Bidder/supplier Or Its Authorized Representative Must Indicate In Any Of The Eligibility Documents, An Email Address Or A Working Fax Number. The Absence Of Which Shall Be A Ground For Disqualification. Notice To The Bidder/supplier Through The Use Of Either Of These Means (email/fax) Is Considered Sufficient Notice. The Date Of Filing Of Reconsideration And All Communications With The Bac Shall Be Its (bac) Date Of Receipt. B. The Bidder(s)/awardee(s) Or Its Authorized Representative Must Conform To The Notice Of Award Within Three (3) Calendar Days From Receipt Of Such Notice And The Winning Bidder Shall Post The Required Performance Security And Enter Into Contract With The Procuring Entity Within Ten (10) Calendar Days From Receipt By The Winning Bidder Of The Notice Of Award In Accordance With Section 37.2.1 Of The Revised Irr Of R.a. No. 9184. C. The Bidder/supplier Must Have No Pending Unaccepted Notice To Proceed Three (3) Days From The Date Of Acceptance And Signing Of The Purchase Order. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. D. The Bidder/supplier Must Have No Notice Of Award Pending Its Conformity Three (3) Days From The Date Of Its Receipt Of The Notice Of Award. Otherwise, It Shall Be Aground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. E. The Bidder/supplier Shall Submit A List Of All Its Ongoing And Completed Projects With The Iloilo Provincial Government Indicating The Delivery Periods And Accomplishments Of Such Projects. F. The Bidder/supplier At The Time Of The Bidding Must Have No Pending Unposted Performance Or Warranty Security, As The Case May Be, Beyond The Period Allowed In The Notice Of Award. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. G. When An Occurrence Of A Tie Among Bidders Takes Place, I.e., Two Or More Of The Bidders Are Determined And Declared As The Lowest Calculated And Responsive Bidder (lcrb), The Winning Bidder Shall Be Determined By Draw Lots Upon Notice To The Bidders Concerned And/or Their Authorized Representatives In Accordance With The Relevant Circulars Issued By The Government Procurement Policy Board (gppb). 11. The Iloilo Provincial Government Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Atty. Raemman M. Lagrada Bac Secretariat Head 5th Floor, Bids And Awards Committee Iloilo Provincial Capitol Email Address: Ipg_bacs@yahoo.com Website: Iloilo.gov.ph Telephone Number: (033) 336-0736 13. You May Visit The Following Websites For Downloading Of Bidding Documents: Ipg.gov.ph And/or Philgeps.com March 21, 2025 Atty. Dennis T. Ventilacion Chairman, Bids And Awards Committee Section Ii. Instructions To Bidders 1. Scope Of Bid The Procuring Entity, Iloilo Provincial Government Wishes To Receive Bids For The Purchase Of Multi-purpose Vehicle With Bid No. Acc-24-1846-b (rebid2) The Procurement Project (referred To Herein As “project”) Is Composed Of One(1) Item, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For 2024 In The Amount Of One Million Nine Hundred Thousand Pesos (php 1,900,000.00) The Source Of Funding Is: Gunian. 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manuals And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Ib By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Verified And Accepted The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, And Coercive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. A. Foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: I. When A Treaty Or International Or Executive Agreement As Provided In Section 4 Of The Ra No. 9184 And Its 2016 Revised Irr Allow Foreign Bidders To Participate; Ii. Citizens, Corporations, Or Associations Of A Country, Included In The List Issued By The Gppb, The Laws Or Regulations Of Which Grant Reciprocal Rights Or Privileges To Citizens, Corporations, Or Associations Of The Philippines; Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or Iv. When There Is A Need To Prevent Situations That Defeat Competition Or Restrain Trade. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No.9184, The Bidder Shall Have An Slcc That Is At Least One (1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must Be At Least Equivalent To: A. For The Procurement Of Non-expendable Supplies And Services: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. B. For The Procurement Of Expendable Supplies: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty-five Percent (25%) Of The Abc. C. For Procurement Where The Procuring Entity Has Determined, After The Conduct Of Market Research, That Imposition Of Either (a) Or (b) Will Likely Result To Failure Of Bidding Or Monopoly That Will Defeat The Purpose Of Public Bidding: The Bidder Should Comply With The Following Requirements: [select Either Failure Or Monopoly Of Bidding Based On Market Research Conducted] I. Completed At Least Two (2) Similar Contracts, The Aggregate Amount Of Which Should Be Equivalent To At Least Fifty Percent (50%) In The Case Of Non-expendable Supplies And Services Or Twenty-five Percent (25%) In The Case Of Expendable Supplies] Of The Abc For This Project; And Ii. The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Abc As Required Above. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.1 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That: Subcontracting Is Not Allowed. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On The Specified Date And Time And Either At Its Physical Address As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicated In Itb Clause 5.3 Should Have Been Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification Issued By Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Bid Prices 12.1. Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A. For Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw (ex-works, Ex-factory, Ex-warehouse, Ex-showroom, Or Off-the-shelf, As Applicable); Ii. The Cost Of All Customs Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other (incidental) Services, If Any, Listed In E. B. For Goods Offered From Abroad: I. Unless Otherwise Stated In The Bds, The Price Of The Goods Shall Be Quoted Delivered Duty Paid (ddp) With The Place Of Destination In The Philippines As Specified In The Bds. In Quoting The Price, The Bidder Shall Be Free To Use Transportation Through Carriers Registered In Any Eligible Country. Similarly, The Bidder May Obtain Insurance Services From Any Eligible Source Country. Ii. The Price Of Other (incidental) Services, If Any, As Listed In Section Vii (technical Specifications). 13. Bid And Payment Currencies 13.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 13.2. Payment Of The Contract Price Shall Be Made In: Philippine Pesos. 14. Bid Security 14.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 14.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty (120) Days. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. 16. Deadline For Submission Of Bids 16.1. The Bidders Shall Submit On The Specified Date And Time At Its Physical Address As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 17.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 17.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1. The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed,” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of The 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items, And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 15 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii (technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As Follows: Complete Bid - One Project Having Several Items That Shall Be Awarded As One Contract In Case Of Complete Bid. Line Bidding/partial Bidding - One Project Having Several Items, Which Shall Be Awarded As Separate Contracts Per Item 19.5. Except For Bidders Submitting A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation, All Bids Must Include The Nfcc Computation Pursuant To Section 23.4.1.4 Of The 2016 Revised Irr Of Ra No. 9184, Which Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. For Bidders Submitting The Committed Line Of Credit, It Must Be At Least Equal To Ten Percent (10%) Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 20. Post-qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract 21.1. The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A. Refers To The Contracts To Be Bid Or The Object Of The Contract; B. Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 7.1 Subcontracting Is Not Allowed. 12 The Price Of The Goods Shall Be Quoted Ddp Office Of The Provincial Accountant Or The Applicable International Commercial Terms (incoterms) For This Project. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration, Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than Two Percent (2%) Of Abc, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or B. The Amount Of Not Less Than Five Percent (5%) Of Abc, If Bid Security Is In Surety Bond. 15 Bidders Shall Prepare An Original Of The First (eligibility And Technical) And Second (financial) Envelopes. In Addition, Bidders Shall Submit Separate Copies Of The First And Second Envelopes (copy 1, Copy 2) And Each Set Of Documents Must Clearly Indicate Whether The Same Is Original, Copy 1, Or Copy 2. In The Event Of Any Discrepancy Between The Original And The Copies, The Original Shall Prevail. 19.3 No Further Instructions. 20.2 For The Procurement Of Drugs And Medicines And Medical Equipment/supplies, The Bidder Shall Submit The Following: A. Certificate Of Product Registration From Food And Drug Administration (fda) For Easy Validation During The Post-qualification; B. Certificate If Good Manufacturing Practice From Fda, For Easy Validation During The Post-qualification; C. Batch Release Certificate From Fda, For Easy Validation During The Post-qualification; D. If The Supplier Is Not The Manufacturer, Certification From The Manufacturer That The Supplier Is An Authorized Distributor/ Dealer Of The Products / Items For Easy Validation During The Post-qualification; E. For The Procurement Of Regulated Drugs, The Applicable Type Of S-license: S-1, S-3 (retailer) S-4 (wholesaler) S-5c (manufacturer) S-5d (bulk Depot/storage) S-5e S-5i (importer); F. License To Operate (lto) Issued By Fda, If Applicable; G. After-sales Services/parts, If Applicable; H. Manpower Requirements, If Applicable. 21.2 No Further Instructions. Section Iv. General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract (scc). 2. Advance Payment And Terms Of Payment 2.1. Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2. The Procuring Entity Is Allowed To Determine The Terms Of Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than Prior To The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr Of Ra No. 9184. 4. Inspection And Tests The Procuring Entity Or Its Representative Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Project Specifications At No Extra Cost To The Procuring Entity In Accordance With The Generic Procurement Manual. In Addition To Tests In The Scc, Section Iv (technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identity Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 6.1. In Order To Assure That Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 6.2. The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Section V. Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: [for Goods Supplied From Within The Philippines, State:] “the Delivery Terms Applicable To This Contract Are Delivered To Office Of The Provincial Accountant Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is The Authorized Employee/official Of The Iloilo Provincial Government. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: A. Performance Or Supervision Of On-site Assembly And/or Start-up Of The Supplied Goods; B. Furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; C. Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. 2.2 Partial Payment Is Not Allowed. 4 The Inspections And Tests That Will Be Conducted Are Through Physical Inspection. Item Number Description Quantity Total Delivered, Weeks/months 1 Multi-purpose Vehicle 1 1 Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. _______________________ Signature Over Printed Name Section Vii. Technical Specifications Bid No.: Acc-24-1846-b(rebid2) Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] 1 Multi-purpose Vehicle With The Following Specifications: Seating Capacity: Minimum Of 8 Seats Engine: In-line 4-cylinder, 16 Valve Double Overhead Camshaft With Intercooler Turbo Charger Or Its Equivalent Displacement: (2,700- 2800) Cc Max Output: 174 Ps (minimum) Max Torque: 360 Nm (minimum) Transmission: 6 Speed Automatic (minimum) Suspension (front/rear): Independent, Double Wishbone With Coil Spring/4-link With Coil Spring Brakes(front/rear): Ventilated Discs/leading-trailing Drum Tires/wheels: 205/65 R16 Alloy Other Features: Air-conditioning And Audio System, Speed Sensing Door Locks, Power Windows, Keyless Entry, Light Control System (minimum) Safety Features: Anti-lock Brakes System, Vehicle Stability Control, Seat Belts, Airbags, Emergency Brake Signal, Reverse Camera And Clearance And Back Sonar (minimum) Fuel: Diesel Fed Terms And Conditions 1. The Vehicle Shall Be Delivered To Iloilo Provincial Capitol, Iloilo City Thirty (30) Calendar Days After Receipt Of Notice To Proceed. 2. Warranty Period Shall Be 36 Months After Acceptance, Or A Mileage Of One Hundred Thousand (100,000) Kilometers, Whichever Comes First. 3. The Bidder Shall Have A Service Center In Iloilo City Or An Agreement With A Service Center In Iloilo City To Do After Sales Which May Be Submitted During Post-qualification. 4. The Dealer Shall Install Stickers Of Iloilo Provincial Government Official Logo And The Word " For Official Use Only" On Both Sides Of The Front Door. 5. The Dealer Shall Shoulder The First Three (3) Years Lto Registration And One (1) Year Gsis Comprehensive Insurance. 6. The Dealer Should Provide For Car Matting, Window Tint, And Seat Cover. _______________________ Signature Over Printed Name Section Viii. Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages);or ⬜ (b) Registration Certificate From Securities And Exchange Commission (sec), Department Of Trade And Industry (dti) For Sole Proprietorship, Or Cooperative Development Authority (cda) For Cooperatives Or Its Equivalent Document, And ⬜ (c) Mayor’s Or Business Permit Issued By The City Or Municipality Where The Principal Place Of Business Of The Prospective Bidder Is Located, Or The Equivalent Document For Exclusive Economic Zones Or Areas; And ⬜ (d) Tax Clearance Per E.o. No. 398, S. 2005, As Finally Reviewed And Approved By The Bureau Of Internal Revenue (bir). Technical Documents ⬜ (e) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (f) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (g) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission; Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (h) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (i) Original Duly Signed Omnibus Sworn Statement (oss); And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (j) The Supplier’s Audited Financial Statements, Showing, Among Others, The Supplier’s Total And Current Assets And Liabilities, Stamped “received” By The Bir Or Its Duly Accredited And Authorized Institutions, For The Preceding Calendar Year Which Should Not Be Earlier Than Two (2) Years From The Date Of Bid Submission; And ⬜ (k) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc); Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents ⬜ (l) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence; Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (m) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (n) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) ⬜ (o) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. ⬜ (p) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity.

Details: Description Invitation To Apply For Eligibility And To Bid The Bids & Award Committee Of The Municipality Of Caibiran, Biliran Is Inviting All Interested Bidders On Its Forthcoming Public Bidding For: Project Title : Acquisition Of Anti-rabies Vaccine Location : Rhu Of Lgu Caibiran, Biliran Delivery Period : 15 W.d. Abc : P149,500.00 Source Of Funds : Gad Fund, 2025 All Particulars Relative To Eligibility Statement And Screening, Evaluation Of Bids, Post-qualification, And Award Of Contract Shall Be Governed By The Pertinent Provision Of R.a 9184 And Its Revised Implementing Rules And Regulations (rirr). Item No. Quantity Unit Of Issue Item Description 1. 115 Vials Purified Rabies Vaccine-speeda 2.5 Iu (vial + 0.5ml Diluent) Schedule Of Activities: (1st Posting) Advertisement : March 27, 2025, To April 3, 2025 Bid Evaluation: April 7, 2025 (9:00 Am At The Office Of The Bac Chairman, Municipal Hall Caibiran, Biliran) 1. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. 2. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From March 28, 2025, Until April 4, 2025, Except Holidays & Upon Payment Of The Applicable Fee From The Municipal Treasurer, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos. [p500.00] 3. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) Or To The Associated Components Of The Invitation To Bid Provided That Bidders Shall Pay The Applicable Fee Not Later Than The Submission Of Their Bids 4. Bids Must Be Duly Received Together With The Official Receipt (o.r.) Issued By The Mun. Treasurer To The Bac Secretary Or To The Bac Chairman On Or Before April 7, 2025, At 9:00 Am. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In The Itb. 5. Bid Evaluation Shall Be On April 7, 2025, At Exactly 9:00 Am At The Office Of The Bac Chairman, Municipal Hall, Caibiran, Biliran. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 6. The Lgu Caibiran Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 7. Checklist Of Eligibility Requirements For Goods Is Hereto Attached: First Envelope (technical Proposal) Note: All Documents To Be Submitted To The Bac Must Be Alphabetically Tabbed According To The Technical Proposal (1st Envelope) & Financial Proposal (2nd Envelope) Eligibility Requirements: Class A Documents 1. Philgeps Platinum Registration In Lieu Of Class A Eligibility Documents Under Section 23.1 (a) & 24.1 (a) All Bidders Shall Upload & Maintain In Philgeps A Current & Updated File Of The Following Class A Eligibility Documents: A. Dti/sec/cda Registration B. Mayor's Business Permit Or Its Equivalent Documents E. Tax Clearance Per Executive Order 398 Series 2005 As Finally Reviewed & Stamp Approved By The Bir F. Audited Financial Statement 2. Statement Of On-going Contracts 3. Statement Of Single Largest Completed Contract (slcc) 4. Nfcc Computation Of Committed Line Of Credit Class B Documents 1. Jva Or Notarized Statement From The Partners That They Will Enter Into Joint Ventures If Awarded The Contract. 2. Bid Security (form Of Bid Security) 3. Production/delivery Schedule 4. Manpower Requirement 5. After-sales Services/parts, If Applicable 6. Omnibus Sworn Statement In The Prescribed Form Note: Any Missing, Incomplete, Or Potentially Insufficient Document In The Above-mentioned Checklist Is A Ground For Outright Rejection Of The Bid. Second Envelope (financial Proposal) 1. Financial Bid Form (include Bid Prices & Bill Of Quantities, As Well As Applicable Price Schedule) 2. Certification If Claiming Preference As Domestic Bidder 3. Other Documents Required In The Bidding Documents Note: Any Missing, Incomplete, Or Potentially Insufficient Document In The Above-mentioned Checklist Is A Ground For Outright Rejection Of The Bid 2025philgeps037

Description: Supply Of Manpower Services- Laboratory Assistant For Westwood Secondary School Loading

Description: (ndp 25) ( Manpower For Temporary Markings -itq) Parade Marking Requirements For National Day Parade (ndp) 2025 Loading

Details: Description Philippine Bidding Documents (as Harmonized With Development Partners) Improvement Of Perimeter Fence At Art Center, Brgy. Nanga, Pototan, Iloilo Bid No. Agr-25-219-b Iloilo Provincial Government Sixth Edition Table Of Contents Glossary Of Terms, Abbreviations, And Acronyms 4 Section I. Invitation To Bid 6 Section Ii. Instructions To Bidders 8 1. Scope Of Bid 8 2. Funding Information 8 3. Bidding Requirements 8 4. Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices 8 5. Eligible Bidders 9 6. Origin Of Associated Goods 9 7. Subcontracts 9 8. Pre-bid Conference 9 9. Clarification And Amendment Of Bidding Documents 9 10. Documents Comprising The Bid: Eligibility And Technical Components 10 11. Documents Comprising The Bid: Financial Component 10 12. Alternative Bids 10 13. Bid Prices 11 14. Bid And Payment Currencies 11 15. Bid Security 11 16. Sealing And Marking Of Bids 11 17. Deadline For Submission Of Bids 11 18. Opening And Preliminary Examination Of Bids 12 19. Detailed Evaluation And Comparison Of Bids 12 20. Post Qualification 12 21. Signing Of The Contract 12 Section Iii. Bid Data Sheet 13 Section Iv. General Conditions Of Contract 15 1. Scope Of Contract 15 2. Sectional Completion Of Works 15 3. Possession Of Site 15 4. The Contractor’s Obligations 15 5. Performance Security 16 6. Site Investigation Reports 16 7. Warranty 16 8. Liability Of The Contractor 16 9. Termination For Other Causes 16 10. Dayworks 17 11. Program Of Work 17 12. Instructions, Inspections And Audits 17 13. Advance Payment 17 14. Progress Payments 17 15. Operating And Maintenance Manuals 17 Section V. Special Conditions Of Contract 18 Section Vi. Specifications 19 Section Vii. Drawings 27 Section Viii. Bill Of Quantities 49 Section Ix. Checklist Of Technical And Financial Documents 52 Glossary Of Terms, Abbreviations, And Acronyms Abc – Approved Budget For The Contract. Arcc – Allowable Range Of Contract Cost. Bac – Bids And Awards Committee. Bid – A Signed Offer Or Proposal To Undertake A Contract Submitted By A Bidder In Response To And In Consonance With The Requirements Of The Bidding Documents. Also Referred To As Proposal And Tender. (2016 Revised Irr, Section 5[c]) Bidder – Refers To A Contractor, Manufacturer, Supplier, Distributor And/or Consultant Who Submits A Bid In Response To The Requirements Of The Bidding Documents. (2016 Revised Irr, Section 5[d]) Bidding Documents – The Documents Issued By The Procuring Entity As The Bases For Bids, Furnishing All Information Necessary For A Prospective Bidder To Prepare A Bid For The Goods, Infrastructure Projects, And/or Consulting Services Required By The Procuring Entity. (2016 Revised Irr, Section 5[e]) Bir – Bureau Of Internal Revenue. Bsp – Bangko Sentral Ng Pilipinas. Cda – Cooperative Development Authority. Consulting Services – Refer To Services For Infrastructure Projects And Other Types Of Projects Or Activities Of The Gop Requiring Adequate External Technical And Professional Expertise That Are Beyond The Capability And/or Capacity Of The Gop To Undertake Such As, But Not Limited To: (i) Advisory And Review Services; (ii) Pre-investment Or Feasibility Studies; (iii) Design; (iv) Construction Supervision; (v) Management And Related Services; And (vi) Other Technical Services Or Special Studies. (2016 Revised Irr, Section 5[i]) Contract – Refers To The Agreement Entered Into Between The Procuring Entity And The Supplier Or Manufacturer Or Distributor Or Service Provider For Procurement Of Goods And Services; Contractor For Procurement Of Infrastructure Projects; Or Consultant Or Consulting Firm For Procurement Of Consulting Services; As The Case May Be, As Recorded In The Contract Form Signed By The Parties, Including All Attachments And Appendices Thereto And All Documents Incorporated By Reference Therein. Contractor – Is A Natural Or Juridical Entity Whose Proposal Was Accepted By The Procuring Entity And To Whom The Contract To Execute The Work Was Awarded. Contractor As Used In These Bidding Documents May Likewise Refer To A Supplier, Distributor, Manufacturer, Or Consultant. Cpi – Consumer Price Index. Dole – Department Of Labor And Employment. Dti – Department Of Trade And Industry. Foreign-funded Procurement Or Foreign-assisted Project – Refers To Procurement Whose Funding Source Is From A Foreign Government, Foreign Or International Financing Institution As Specified In The Treaty Or International Or Executive Agreement. (2016 Revised Irr, Section 5[b]). Gfi – Government Financial Institution. Gocc – Government-owned And/or –controlled Corporation. Goods – Refer To All Items, Supplies, Materials And General Support Services, Except Consulting Services And Infrastructure Projects, Which May Be Needed In The Transaction Of Public Businesses Or In The Pursuit Of Any Government Undertaking, Project Or Activity, Whether In The Nature Of Equipment, Furniture, Stationery, Materials For Construction, Or Personal Property Of Any Kind, Including Non-personal Or Contractual Services Such As The Repair And Maintenance Of Equipment And Furniture, As Well As Trucking, Hauling, Janitorial, Security, And Related Or Analogous Services, As Well As Procurement Of Materials And Supplies Provided By The Procuring Entity For Such Services. The Term “related” Or “analogous Services” Shall Include, But Is Not Limited To, Lease Or Purchase Of Office Space, Media Advertisements, Health Maintenance Services, And Other Services Essential To The Operation Of The Procuring Entity. (2016 Revised Irr, Section 5[r]) Gop – Government Of The Philippines. Infrastructure Projects – Include The Construction, Improvement, Rehabilitation, Demolition, Repair, Restoration Or Maintenance Of Roads And Bridges, Railways, Airports, Seaports, Communication Facilities, Civil Works Components Of Information Technology Projects, Irrigation, Flood Control And Drainage, Water Supply, Sanitation, Sewerage And Solid Waste Management Systems, Shore Protection, Energy/power And Electrification Facilities, National Buildings, School Buildings, Hospital Buildings, And Other Related Construction Projects Of The Government. Also Referred To As Civil Works Or Works. (2016 Revised Irr, Section 5[u]) Lgus – Local Government Units. Nfcc – Net Financial Contracting Capacity. Nga – National Government Agency. Pcab – Philippine Contractors Accreditation Board. Philgeps - Philippine Government Electronic Procurement System. Procurement Project – Refers To A Specific Or Identified Procurement Covering Goods, Infrastructure Project Or Consulting Services. A Procurement Project Shall Be Described, Detailed, And Scheduled In The Project Procurement Management Plan Prepared By The Agency Which Shall Be Consolidated In The Procuring Entity's Annual Procurement Plan. (gppb Circular No. 06-2019 Dated 17 July 2019) Psa – Philippine Statistics Authority. Sec – Securities And Exchange Commission. Slcc – Single Largest Completed Contract. Un – United Nations. Republic Of The Philippines Iloilo Provincial Government Section I. Invitation To Bid For Improvement Of Perimeter Fence At Art Center, Brgy. Nanga, Pototan, Iloilo Bid No. Agr-25-219-b The Iloilo Provincial Government, Through The 20% Nta Development Fund Fy-2025 Intends To Apply The Sum Of Five Million Pesos (p5,000,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Agr-25-219-b For The Improvement Of Perimeter Fence At Art Center, Brgy. Nanga, Pototan, Iloilo For The Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Iloilo Provincial Government Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required Ninety (90) Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Interested Bidders May Obtain Further Information From The Bids And Awards Committee Secretariat, 5th Floor, New Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City, Philippines And Inspect The Bidding Documents At The Address Given Below From 8:00am To 5:00pm. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On March 28, 2025 From Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (p5, 000,00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. The Iloilo Provincial Government Will Hold A Pre-bid Conference On April 8, 2025, 9:00 A.m. At Bids And Awards Committee Secretariat, 5th Floor, New Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City, Philippines, And/or Through Videoconferencing/webcasting Via Zoom Conference Which Shall Be Open To Prospective Bidders. The Default Meeting Id And Password Shall Be: Meeting Id: 4340851724 // Password: 0922 Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At Bids And Awards Committee Secretariat, 5th Floor, New Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City On Or Before April 22, 2025, 9:00 A.m. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. Bid Opening Shall Be On April 22, 2025, 9:01 A.m. At Bids And Awards Committee Secretariat, 5th Floor, New Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City, Philippines. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. The Iloilo Provincial Government Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Atty. Raemman M. Lagrada Head, Bac Secretariat 5f New Iloilo Provincial Capitol Bonifacio Drive, Iloilo City Tel. No. (33) 336-0736 Fax No. (33) 337-7731 Email: Ipg_bacs@yahoo.com You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.iloilo.gov.ph March 17, 2025 Atty. Dennis T. Ventilacion Bac Chairperson Section Ii. Instructions To Bidders Scope Of Bid The Procuring Entity, Iloilo Provincial Government Invites Bids For The Improvement Of Perimeter Fence At Art Center, Brgy. Nanga, Pototan, Iloilo With Project Identification Number Agr-25-219-b. The Procurement Project (referred To Herein As “project”) Is For The Construction Of Works, As Described In Section Vi (specifications). Funding Information The Gop Through The Source Of Funding As Indicated Below For 2025 In The Amount Of Five Million Pesos (p5,000,000.00) The Source Of Funding Is: A. Lgu’s, 20% Nta Development Fund Fy 2025 As Approved By The Sanggunian. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manual And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Invitation To Bid By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Inspected The Site, Determined The General Characteristics Of The Contracted Works And The Conditions For This Project, Such As The Location And The Nature Of The Work; (b) Climatic Conditions; (c) Transportation Facilities; (c) Nature And Condition Of The Terrain, Geological Conditions At The Site Communication Facilities, Requirements, Location And Availability Of Construction Aggregates And Other Materials, Labor, Water, Electric Power And Access Roads; And (d) Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices The Procuring Entity, As Well As The Bidders And Contractors, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. Eligible Bidders Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. The Bidder Must Have An Experience Of Having Completed A Single Largest Completed Contract (slcc) That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc Adjusted, If Necessary, By The Bidder To Current Prices Using The Psa’s Cpi, Except Under Conditions Provided For In Section 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184. A Contract Is Considered To Be “similar” To The Contract To Be Bid If It Has The Major Categories Of Work Stated In The Bds. For Foreign-funded Procurement, The Procuring Entity And The Foreign Government/foreign Or International Financing Institution May Agree On Another Track Record Requirement, As Specified In The Bidding Document Prepared For This Purpose. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.2 Of The 2016 Irr Of Ra No. 9184. Origin Of Associated Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un. Subcontracts The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Fifty Percent (50%) Of The Project. The Procuring Entity Has Prescribed That: Subcontracting Is Not Allowed. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On The Specified Date And Time And Either At Its Physical Address At Bac Office, 5th Floor, New Iloilo Provincial Capitol, Iloilo City And/or Through Videoconferencing As Indicated In Paragraph 6 Of The Ib. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. Documents Comprising The Bid: Eligibility And Technical Components The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Ix. Checklist Of Technical And Financial Documents. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. In Joint Ventures, A Special Pcab License, And Registration For The Type And Cost Of The Contract For This Project, Shall Be Required. Any Additional Type Of Contractor License Or Permit Shall Be Indicated In The Bds. A List Of Contractor’s Key Personnel (e.g., Project Manager, Project Engineers, Materials Engineers, And Foremen) Assigned To The Contract To Be Bid, With Their Complete Qualification And Experience Data Shall Be Provided. These Key Personnel Must Meet The Required Minimum Years Of Experience Set In The Bds. A List Of Contractor’s Major Equipment Units, Which Are Owned, Leased, And/or Under Purchase Agreements, Supported By Proof Of Ownership, Certification Of Availability Of Equipment From The Equipment Lessor/vendor For The Duration Of The Project, As The Case May Be, Must Meet The Minimum Requirements For The Contract Set In The Bds. Documents Comprising The Bid: Financial Component The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Ix. Checklist Of Technical And Financial Documents. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. Alternative Bids Bidders Shall Submit Offers That Comply With The Requirements Of The Bidding Documents, Including The Basic Technical Design As Indicated In The Drawings And Specifications. Unless There Is A Value Engineering Clause In The Bds, Alternative Bids Shall Not Be Accepted. Bid Prices All Bid Prices For The Given Scope Of Work In The Project As Awarded Shall Be Considered As Fixed Prices, And Therefore Not Subject To Price Escalation During Contract Implementation, Except Under Extraordinary Circumstances As Determined By The Neda And Approved By The Gppb Pursuant To The Revised Guidelines For Contract Price Escalation Guidelines. Bid And Payment Currencies Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. Payment Of The Contract Price Shall Be Made In: Philippine Pesos. Bid Security The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. The Bid And Bid Security Shall Be Valid Until August 20, 2025. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. If The Procuring Entity Allows The Submission Of Bids Through Online Submission To The Given Website Or Any Other Electronic Means, The Bidder Shall Submit An Electronic Copy Of Its Bid, Which Must Be Digitally Signed. An Electronic Copy That Cannot Be Opened Or Is Corrupted Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. Deadline For Submission Of Bids The Bidders Shall Submit On The Specified Date And Time And Either At Its Physical Address Or Through Online Submission As Indicated In Paragraph 7 Of The Ib. Opening And Preliminary Examination Of Bids The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. Detailed Evaluation And Comparison Of Bids The Procuring Entity’s Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of 2016 Revised Irr Of Ra No. 9184. If The Project Allows Partial Bids, All Bids And Combinations Of Bids As Indicated In The Bds Shall Be Received By The Same Deadline And Opened And Evaluated Simultaneously So As To Determine The Bid Or Combination Of Bids Offering The Lowest Calculated Cost To The Procuring Entity. Bid Security As Required By Itb Clause 16 Shall Be Submitted For Each Contract (lot) Separately. In All Cases, The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184 Must Be Sufficient For The Total Of The Abcs For All The Lots Participated In By The Prospective Bidder. Post Qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps), And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. Signing Of The Contract The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Itb Clause 5.2 For This Purpose, Contracts Similar To The Project Refer To Contracts Which Have The Same Major Categories Of Work, Which Shall Be: Structural Works 7.1 The Procuring Entity Has Prescribed That Subcontracting Is Not Allowed. 10.3 [specify If Another Contractor License Or Permit Is Required.] 10.4 The Key Personnel Must Meet The Required Minimum Years Of Experience Set Below: Key Personnel General Experience Relevant Experience 1-project Engineer 1 Year 1 Year 1-material Engineer 1 Year 1 Year 1-health & Safety Officer 1 Year 1 Year 1-foreman 1 Year 1 Year 10.5 The Minimum Major Equipment Requirements Are The Following: Equipment Capacity Number Of Units Bar Cutter & Bar Bender - 1 Concrete Vibrator - 1 One-bagger Mixer - 1 Generator - 1 12 Alternative Bids Are Not Allowed 15.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration Or Any Of The Following Forms And Amounts: The Amount Of Not Less Than Two Percent (2%) Of Abc, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; The Amount Of Not Less Than Five Percent (5%) Of Abc If Bid Security Is In Surety Bond. 16 Bidders Shall Prepare An Original Of The First (eligibility And Technical) And Second (financial) Envelopes. In Addition, Bidders Shall Submit Separate Copies Of The First And Second Envelopes (copy 1, Copy 2) And Each Set Of Documents Must Clearly Indicate Whether The Same Is Original, Copy 1, Or Copy 2. In The Event Of Any Discrepancy Between The Original And The Copies, The Original Shall Prevail. Itb Clause 16 All Envelopes Shall: A. Contain The Name Of The Contract To Be Bid In Capital Letters: “improvement Of Perimeter Fence At Art Center, Brgy. Nanga, Pototan, Iloilo” B. Bear The Name And Address Of The Bidder In Capital Letters; Addressed To: Atty. Dennis T. Ventilacion, Chairperson, Bids And Awards Committee: D. Bear The Specific Identification Of This Procurement: “agr-25-219-b” E. Bear A Warning “do Not Open Before April 22, 2025” Indicating The Date And Time For The Submission Of Bids On The Blank: Bid Envelopes That Are Not Properly Sealed And Marked, As Required In The Bidding Documents, Shall Not Be Rejected, But The Bidder Or Its Duly Authorized Representative Shall Acknowledge Such Condition Of The Bid As Submitted. The Bac Or The Procuring Entity Shall Assume No Responsibility For The Misplacement Of The Contents Of The Improperly Sealed Or Marked Bid, Or For Its Premature Opening. Any Interlineations, Erasures, Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By The Duly Authorized Representative/s Of The Bidder 19.2 Partial Bid Is Not Allowed 20 No Further Instructions. 21 The Additional Contract Documents Relevant To The Project That Are Required By The Procuring Entity Are: A. Construction Schedule And S-curve; B. Manpower Schedule; C. Construction Methods; D. Equipment Utilization Schedule; E. Construction Safety And Health Program Approved By The Department Of Labor And Employment; And F. Pert/cpm Section Iv. General Conditions Of Contract Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Sectional Completion Of Works If Sectional Completion Is Specified In The Special Conditions Of Contract (scc), References In The Conditions Of Contract To The Works, The Completion Date, And The Intended Completion Date Shall Apply To Any Section Of The Works (other Than References To The Completion Date And Intended Completion Date For The Whole Of The Works). Possession Of Site The Procuring Entity Shall Give Possession Of All Or Parts Of The Site To The Contractor Based On The Schedule Of Delivery Indicated In The Scc, Which Corresponds To The Execution Of The Works. If The Contractor Suffers Delay Or Incurs Cost From Failure On The Part Of The Procuring Entity To Give Possession In Accordance With The Terms Of This Clause, The Procuring Entity’s Representative Shall Give The Contractor A Contract Time Extension And Certify Such Sum As Fair To Cover The Cost Incurred, Which Sum Shall Be Paid By Procuring Entity. If Possession Of A Portion Is Not Given By The Above Date, The Procuring Entity Will Be Deemed To Have Delayed The Start Of The Relevant Activities. The Resulting Adjustments In Contract Time To Address Such Delay May Be Addressed Through Contract Extension Provided Under Annex “e” Of The 2016 Revised Irr Of Ra No. 9184. The Contractor’s Obligations The Contractor Shall Employ The Key Personnel Named In The Schedule Of Key Personnel Indicating Their Designation, In Accordance With Itb Clause 10.3 And Specified In The Bds, To Carry Out The Supervision Of The Works. The Procuring Entity Will Approve Any Proposed Replacement Of Key Personnel Only If Their Relevant Qualifications And Abilities Are Equal To Or Better Than Those Of The Personnel Listed In The Schedule. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award From The Procuring Entity But In No Case Later Than The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr. The Contractor, By Entering Into The Contract With The Procuring Entity, Acknowledges The Right Of The Procuring Entity To Institute Action Pursuant To Ra No. 3688 Against Any Subcontractor Be They An Individual, Firm, Partnership, Corporation, Or Association Supplying The Contractor With Labor, Materials And/or Equipment For The Performance Of This Contract. Site Investigation Reports The Contractor, In Preparing The Bid, Shall Rely On Any Site Investigation Reports Referred To In The Scc Supplemented By Any Information Obtained By The Contractor. Warranty In Case The Contractor Fails To Undertake The Repair Works Under Section 62.2.2 Of The 2016 Revised Irr, The Procuring Entity Shall Forfeit Its Performance Security, Subject Its Property(ies) To Attachment Or Garnishment Proceedings, And Perpetually Disqualify It From Participating In Any Public Bidding. All Payables Of The Gop In His Favor Shall Be Offset To Recover The Costs. The Warranty Against Structural Defects/failures, Except That Occasioned-on Force Majeure, Shall Cover The Period From The Date Of Issuance Of The Certificate Of Final Acceptance By The Procuring Entity. Specific Duration Of The Warranty Is Found In The Scc. Liability Of The Contractor Subject To Additional Provisions, If Any, Set Forth In The Scc, The Contractor’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Contractor Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Termination For Other Causes Contract Termination Shall Be Initiated In Case It Is Determined Prima Facie By The Procuring Entity That The Contractor Has Engaged, Before, Or During The Implementation Of The Contract, In Unlawful Deeds And Behaviors Relative To Contract Acquisition And Implementation, Such As, But Not Limited To Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices As Stated In Itb Clause 4. Dayworks Subject To The Guidelines On Variation Order In Annex “e” Of The 2016 Revised Irr Of Ra No. 9184, And If Applicable As Indicated In The Scc, The Dayworks Rates In The Contractor’s Bid Shall Be Used For Small Additional Amounts Of Work Only When The Procuring Entity’s Representative Has Given Written Instructions In Advance For Additional Work To Be Paid For In That Way. Program Of Work The Contractor Shall Submit To The Procuring Entity’s Representative For Approval The Said Program Of Work Showing The General Methods, Arrangements, Order, And Timing For All The Activities In The Works. The Submissions Of The Program Of Work Are Indicated In The Scc. The Contractor Shall Submit To The Procuring Entity’s Representative For Approval An Updated Program Of Work At Intervals No Longer Than The Period Stated In The Scc. If The Contractor Does Not Submit An Updated Program Of Work Within This Period, The Procuring Entity’s Representative May Withhold The Amount Stated In The Scc From The Next Payment Certificate And Continue To Withhold This Amount Until The Next Payment After The Date On Which The Overdue Program Of Work Has Been Submitted. Instructions, Inspections And Audits The Contractor Shall Permit The Gop Or The Procuring Entity To Inspect The Contractor’s Accounts And Records Relating To The Performance Of The Contractor And To Have Them Audited By Auditors Of The Gop Or The Procuring Entity, As May Be Required. Advance Payment The Procuring Entity Shall, Upon A Written Request Of The Contractor Which Shall Be Submitted As A Contract Document, Make An Advance Payment To The Contractor In An Amount Not Exceeding Fifteen Percent (15%) Of The Total Contract Price, To Be Made In Lump Sum, Or At The Most Two Installments According To A Schedule Specified In The Scc, Subject To The Requirements In Annex “e” Of The 2016 Revised Irr Of Ra No. 9184. Progress Payments The Contractor May Submit A Request For Payment For Work Accomplished. Such Requests For Payment Shall Be Verified And Certified By The Procuring Entity’s Representative/project Engineer. Except As Otherwise Stipulated In The Scc, Materials And Equipment Delivered On The Site But Not Completely Put In Place Shall Not Be Included For Payment. Operating And Maintenance Manuals If Required, The Contractor Will Provide “as Built” Drawings And/or Operating And Maintenance Manuals As Specified In The Scc. If The Contractor Does Not Provide The Drawings And/or Manuals By The Dates Stated Above, Or They Do Not Receive The Procuring Entity’s Representative’s Approval, The Procuring Entity’s Representative May Withhold The Amount Stated In The Scc From Payments Due To The Contractor. Section V. Special Conditions Of Contract Gcc Clause 2 As Per Construction Schedule/contract Period 3.1 The Procuring Entity Shall Give Possession Of All Parts Of The Site To The Contractor Upon Effectivity Of The Contracts. 6 No Further Instructions 7.2 [in Case Of Permanent Structures, Such As Buildings Of Types 4 And 5 As Classified Under The National Building Code Of The Philippines And Other Structures Made Of Steel, Iron, Or Concrete Which Comply With Relevant Structural Codes (e.g., Dpwh Standard Specifications), Such As, But Not Limited To, Steel/concrete Bridges, Flyovers, Aircraft Movement Areas, Ports, Dams, Tunnels, Filtration And Treatment Plants, Sewerage Systems, Power Plants, Transmission And Communication Towers, Railway System, And Other Similar Permanent Structures:] Fifteen (15) Years. 10 Dayworks Are Applicable At The Rate Shown In The Contractor’s Original Bid. 11.1 No Further Instructions 11.2 No Further Instructions 13 The Amount Of The Advance Shall Not Exceed 15% Of The Total Contract Price. 14 Materials And Equipment Delivered On The Site But Not Completely Installed Or Constructed Shall Not Be Included For Payment. 15.1 The Date By Which Operating And Maintenance Manuals Are Required Shall Be At Least 5 Days Before The Testing And Commissioning. The Date By Which “as Built” Drawings Are Required Prior To The Final Billing. 15.2 The Amount To Be Withheld For Failing To Produce “as Built” Drawings And/or Operating And Maintenance Manuals By The Date Required Is 1% Of The Final Contract Amount. Section Vi. Specification Scope Of Works The Works Include Furnishing Of Labor, Materials, Tools, Equipment And Other Incidentals Necessary To Complete The Project Such As: Clearing, Grubbing, And Staking, Excavation Works, Backfill, Concrete Works (concreting, Gravel Bedding, Steel Works, And Formworks), Masonry Works, And Plastering Works. Other General Requirements B.4 - Construction Survey And Staking B.4.1 Description This Item Shall Consist Of Furnishing The Necessary Equipment And Material To Survey, Stake, Calculate, And Record Data For The Control Of Work In Accordance With This Specification And In Conformity With The Lines, Grades And Dimensions Shown On The Plans Or As Established By The Engineer. B.4.2 Construction Requirements B.4.2.1 General Staking Activities Shall Be Included In The Construction Schedule To Be Submitted By The Contractor. Dates And Sequence Of Each Staking Activity Shall Be Included. The Engineer Shall Set Initial Reference Lines, Horizontal And Vertical Control Points, And Shall Furnish The Data For Use In Establishing Control For The Completion Of Each Element Of The Work. Data Relating To Horizontal And Vertical Alignments, Theoretical Slope Stake Catch Points, And Other Design Data Shall Be Furnished. The Contractor Shall Be Responsible For The True Settling Of The Works Or Improvements And For Correctness Of Positions, Levels, Dimensions And Alignment Of All Parts Of The Works. He Shall Provide All Necessary Instruments, Appliances, Materials And Supplies, And Labor In Connection Therewith. The Contractor Shall Provide A Survey Crew Supervisor At The Project Site Whenever Surveying/staking Activity Is In Progress. Prior To Construction, The Engineer Shall Be Notified Of Any Missing Initial Reference Lines, Controls, Points, Or Stakes. The Engineer Shall Reestablish Missing Initial Reference Lines, Controls, Points, Or Stakes. The Contractor For Convenient Use Of Government-furnished Data Shall Perform Additional Calculations. Immediate Notification Of Apparent Errors In The Initial Staking Or In The Furnished Data Shall Be Provided. All Initial Reference And Control Points Shall Be Preserved. At The Start Of Construction, All Destroyed Or Disturbed Initial Reference Or Control Points Necessary To The Work Shall Be Replaced. Before Surveying And Staking, The Contractor Shall Discuss And Coordinate The Following With The Engineer: 1. Surveying And Staking Methods 2. Stake Marking/concrete Monuments 3. Grade Control For Courses Of Material 4. Referencing 5. Structure Control 6. Any Other Procedures And Controls Necessary For The Work Established Controls Shall Be Within The Tolerances Shown In Table 1. Table 1: Construction Survey And Staking Tolerances (1) Staking Phase Horizontal Vertical Existing Government Network Control Points ±20mm ±8mm X √k ² Local Supplemental Control Points Set From Existing Government Network Points ±10mm ±3mm X √n³ Centerline Points (4) - (pc), (pt), (pot), And (pac) Including References ±10mm ±10mm Other Centerline Points ±50mm ±50mm Cross-section Points And Slope Stakes (5) ±50mm ±50mm Slope Stakes References ±50mm ±50mm Culverts, Ditches, And Minor Drainage Structures ±50mm ±20mm Retaining Walls And Curb And Gutter ±20mm ±10mm Bridge Substructures ±10mm (6) ±10mm Bridge Superstructures ±10mm (6) ±10mm Clearing And Grubbing Limits ±500mm Roadway Subgrade Finish Stakes (7) ±50mm ±10mm Roadway Finish Grade Stakes (7) ±50mm ±10mm (1) At 95% Confidence Level. Tolerances Are Relative To Existing Government Network Control Points. (2) K Is The Distance In Kilometers. (3) N Is The Number Of Instrument Setups. (4) Centerline Points: Pc - Point Of Curve, Pt - Point Of Tangent, Pot - Point On Tangent, Poc - Point On Curve (5) Take The Cross-sections Normal To The Centerline + 1 Degree. (6) Bridge Control Is Established As Local Network And The Tolerances Are Relative To That Network. (7) Include Pave Ditches. The Contractor Shall Prepare Field Notes In An Approved Format. All Field Notes And Supporting Documentation Shall Become The Property Of The Government Upon Completion Of The Work. Work Shall Only Be Started After Staking For The Affected Work Is Accepted. The Construction Survey And Staking Work May Be Spot-checked By The Engineer For Accuracy, And Unacceptable Portions Of Work May Be Rejected. Rejected Work Shall Be Resurveyed, And Work That Is Not Within The Tolerances Specified In Table 1 Shall Be Corrected. Acceptance Of The Construction Staking Shall Not Relieve The Contractor Of Responsibility For Correcting Errors Discovered During The Work And For Bearing All Additional Costs Associated With The Error, Unless Such Error Is Based On Incorrect Data Supplied In Writing By The Engineer, In Which Case, The Expense In Rectifying The Same Shall Be At The Expense Of The Government. In The Case Of "change" Or "changed Conditions" Which Involve Any Change In Stakeout, The Contractor Shall Coordinate With The Engineer And Facilitate The Prompt Reestablishment Of The Field Control For The Altered Or Adjusted Work. All Flagging, Lath, Stakes, And Other Staking Materials Shall Be Removed And Disposed After The Project Is Completed. B.4.2.2 Equipment Survey Instruments And Supporting Equipment Capable Of Achieving The Specified Tolerances Shall Be Furnished. Acceptable Tools, Supplies, And Stakes Of The Type And Quality Normally Used In Highway Survey Work And Suitable For The Intended Use Shall Be Furnished. Stakes And Hubs Of Sufficient Length To Provide A Solid Set In The Ground With Sufficient Surface Area Above Ground For Necessary Legible Markings Shall Also Be Furnished. B.4.2.3 Survey And Staking Requirements All Survey, Staking, Recording Of Data, And Calculations Necessary To Construct The Project From The Initial Layout To Final Completion Shall Be Performed. Stakes Shall Be Reset As Many Times As Necessary To Construct The Work. 1. Control Points Established Initial Horizontal And Vertical Control Points In Conflict With Construction Shall Be Relocated To Areas That Will Not Be Disturbed By Construction Operations. The Coordinates And Elevations For The Relocated Points Shall Be Furnished Before The Initial Points Are Disturbed. 2. Roadway Cross-sections Roadway Cross-sections Shall Be Taken Normal Or Perpendicular To The Centerline. When The Centerline Horizontal Curve Radius Is Less Than Or Equal To 150 Meters And Vertical Parabolic Curve Radius Is Less Than Or Equal To 100 Meters, Cross-sections Shall Be Taken At A Maximum Centerline Spacing Of 10 Meters. When The Centerline Horizontal Curve Radius Is Greater Than 150 Meters And Vertical Parabolic Curve Radius Is Greater Than 100 Meters, Cross-sections Shall Be Taken At A Maximum Centerline Spacing Of 20 Meters. Additional Cross-sections Shall Be Taken At Significant Breaks In Topography And At Changes In The Typical Roadway Section Including Transition Change To Super Elevated Sections. Along Each Cross-section, Points Shall Be Measured And Recorded At Breaks In Topography And At Changes In Typical Roadway Section Including Transition Change To Super Elevated Sections And Shall Be No Further Apart Than 5 Meters. Points Shall Be Measured And Recorded To At Least The Anticipated Slope Stake And Reference Locations. All Cross-section Distances Shall Be Reduced To Horizontal Distances From Centerline. 3. Slope Stakes And References Slope Stakes And References Shall Be Set On Both Sides Of Centerline At The Cross-section Locations. Slope Stakes Shall Be Established In The Field As The Actual Point Of Intersection Of The Design Roadway Slope With The Natural Ground Line. Slope Stake References Shall Be Set Outside The Clearing Limits. All Reference Point And Slope Stake Information Shall Be Included On The Reference Stakes. When Initial References Are Provided, Slope Stakes May Be Set From These Points With Verification Of The Slope Stake Location With Field Measurements. Slope Stakes On Any Section That Do Not Match With The Staking Report Within The Tolerances Established In Table 1 Shall Be Recatched. Roadway Cross-section Data Shall Be Taken Between Centerline And The New Slope Stake Location. Additional References Shall Be Set Even When The Initial References Are Provided. 4. Clearing And Grubbing Limits Clearing And Grubbing Limits Shall Be Set On Both Sides Of Centerline At Roadway Cross-section Locations, Extending One (1) Meter Beyond The Toe Of The Fill Slopes Or Beyond Rounding Of Cut Slopes As The Case Maybe For The Entire Length Of The Project Unless Otherwise Shown On The Plans Or As Directed By The Engineer. 5. Centerline Reestablishment Centerline Shall Be Reestablished From Instrument Control Points. The Maximum Spacing Between Centerline Points Shall Be 10 Meters When The Centerline Horizontal Curve Radius Is Less Than Or Equal To 150 Meters And Vertical Parabolic Curve Radius Is Less Than Or Equal To 100 Meters. When The Centerline Horizontal Curve Radius Is Greater Than 150 Meters And Vertical Parabolic Curve Radius Is Greater Than 100 Meters, The Maximum Distance Between Centerline Points Shall Be 20 Meters. 6. Grade Finishing Stakes Grade Finishing Stakes Shall Be Set For Grade Elevations And Horizontal Alignment, At The Centerline And At Each Shoulder Of Roadway Cross-section Locations. Stakes Shall Be Set At The Top Of Subgrade And The Top Of Each Aggregate Course. Where Turnouts Are Constructed, Stakes Shall Be Set At The Centerline, At Each Normal Shoulder, And At The Shoulder Of The Turnout. In Parking Areas, Hubs Shall Be Set At The Center And Along The Edges Of The Parking Area. Stakes Shall Be Set At All Ditches To Be Paved. The Maximum Longitudinal Spacing Between Stakes Shall Be 10 Meters When The Centerline Horizontal Curve Radius Is Less Than Or Equal To 150 Meters And Vertical Parabolic Curve Radius Is Less Than Or Equal To 100 Meters. When The Centerline Horizontal Curve Radius Is Greater Than 150 Meters And Vertical Parabolic Curve Radius Is Greater Than 100 Meters, The Maximum Longitudinal Spacing Between Stakes Shall Be 20 Meters. The Maximum Transverse Spacing Between Stakes Shall Be 5 Meters. Brushes Or Guard Stakes Shall Be Used At Each Stake. 7. Culverts Culverts Shall Be Staked To Fit Field Conditions. The Location Of Culverts May Differ From The Plans. The Following Shall Be Performed: A. Survey And Record The Ground Profile Along The Culvert Centerline Including Inlet And Outlet Channel Profile Of At Least 10 Meters And As Additionally Directed By The Engineer So As To Gather All Necessary Data For The Preparation Of Pipe Projection Plan. B. Determine The Slope Catch Points At The Inlet And Outlet. C. Set The Reference Points And Record Information Necessary To Determine Culvert Length And End Treatments. D. Plot Into Scale The Profile Along The Culvert Centerline Reflecting The Natural Ground Elevation, Invert Elevation, The Flow Line, The Roadway Section, And The Size, Length And The Degree Of Elbow Of Culvert, End Treatments, Grade And Other Appurtenances. E. Plot Into Scale The Cross-section Of Inlet And Outlet Channel At Not More Than 5 Meters Interval. F. Submit The Plotted Pipe Projection Plan For Approval Of Final Culvert Length, Alignment And Headwall. G. When The Pipe Projection Plan Has Been Approved, Set Drainage Culvert Structure Survey And Reference Stakes, And Stake Inlet And Outlet To Make The Structure Functional. 8. Retaining Walls And Other Types Of Slope Protection Works Profile Measurements Along The Face Of The Proposed Wall And 2 Meters In Front Of The Wall Face Shall Be Surveyed And Recorded. Cross-sections Shall Be Taken Within The Limits Designated By The Engineer At Every 5 Meters Along The Length Of The Wall And All Major Breaks In Terrain. For Each Cross-section, Points Shall Be Measured And Recorded Every 5 Meters And At All Major Breaks In Terrain. Adequate References And Horizontal And Vertical Control Points Shall Be Set. 9. Borrow And Waste Sites The Work Essential For Initial Layout And Measurement Of The Borrow Or Waste Site Shall Be Performed. A Referenced Baseline, Site Limits, And Clearing Limits Shall Be Established. Initial And Final Cross-sections Shall Be Surveyed And Recorded. 10. Permanent Monuments And Markers All Survey And Staking Necessary To Establish Permanent Monuments And Markers Shall Be Performed. 11. Miscellaneous Survey And Staking All Surveying, Staking, And Recording Of Data Essential For Establishing The Layout And Control Of The Following Shall Be Performed, As Applicable: A. Approach Roads And Trails B. Road Right Of Way And Construction Limit In Accordance With The Approved Parcellary Plan. C. Curb And Gutter D. Guardrail E. Parking Areas F. Paved Waterways And Outfall Structures G. Lined Canals And Other Ditches H. Chutes And Spillways I. Turf Establishment-s J. Utilities K. Signs, Delineators, And Object 9 Markers I. Pavement Markings B.4.3 Method Of Measurement Construction Survey And Staking Shall Be Measured By The Kilometer. Slope, Reference, And Clearing And Grubbing Stakes Shall Be Measured By The Kilometer. Centerline Establishment Shall Be Measured By The Kilometer. Centerline Reestablishment Shall Be Measured Only One Time. Culvert Survey And Staking Shall Be Measured By The Each. Grade Finishing Stakes Shall Be Measured By The Kilometer. Subgrade Shall Be Measured One Time And Each Aggregate Course Shall Also Be Measured One Time. Permanent Monuments And Markers Shall Be Measured By Each Unit Placed And Installed At The Proper Locations. Miscellaneous Survey And Staking Shall Be Measured By The Hour Of Survey Work Ordered Or By The Lump Sum. For Miscellaneous Survey And Staking Paid By The Hour, The Minimum Survey Crew Size Shall Be 2 Persons. Time Spent In Making Preparations, Travelling To And From The Project Site, Performing Calculations, Plotting Cross Sections And Other Data, Processing Computer Data, And Other Efforts Necessary To Successfully Accomplish Construction Survey And Staking Shall Not Be Measured Separately But Deemed Included As Subsidiary For Each Of The Pay Item. Project Sign Board / Billboard The Contractor Shall Ensure That The Project Site Is Identified With Information Billboard Which Shall Be Erected At The Beginning And Ending Of The Proposed Project. The Layout Of The Billboard Shall Accord To The Specifications Pursuant To The Commission On Audit (coa) Circular No. 2013-004 Issued On January 30, 2013. Coa Billboard Pao Billboard The Billboard’s Specifications Shall Conform To The Following Requirements: Tarpaulin, White, 8ft X 8ft (coa) And 4ft X 8ft (pao): Resolution: 70 Dpi; Font: Helvetica; Font Size: Main Information – 3”; Sub-information – 1”; Font Color: Black; Suitable Frame: Rigid Wood Or Steel Frame With Post; And, Posting: Outside Display At The Project Location After Award Has Been Made. Measurement The Supply And Erection Of Project Billboard Shall Be In Accordance With Provisions Of This Specification And Shall Be Measured For Payment. Basis Of Payment Payment Shall Be In Accordance With All The Cost Associated With The Compliance Of This Specification And Shall Be Included In The Contractor’s Bid Price. No Additional Or Separate Payment Will Be Made In This Regard As Well As For The Maintenance Of The Billboard. Pay Item Number Description Unit Of Measurement B.5 Project Billboard Each Part C – Earthwork Item 100 – Clearing And Grubbing 100.1 Description This Item Shall Consist Of Clearing, Grubbing, Removing And Disposing All Vegetation And Debris As Designated In The Contract, Except Those Objects That Are Designated To Remain In Place Or Are To Be Removed In Consonance With Other Provisions Of This Specification. The Work Shall Also Include The Preservation From Injury Or Defacement Of All Objects Designated To Remain. 100.2 Construction Requirements 100.2.1 General The Engineer Will Establish The Limits Of Work And Designate All Trees, Shrubs, Plants And Other Things To Remain. The Contractor Shall Preserve All Objects Designated To Remain. Paint Required For Cut Or Scarred Surface Of Trees Or Shrubs Selected For Retention Shall Be An Approved Asphaltum Base Paint Prepared Especially For Tree Surgery. Clearing Shall Extend One (1) Meter Beyond The Toe Of The Fill Slopes Or Beyond Rounding Of Cut Slopes As The Case Maybe For The Entire Length Of The Project Unless Otherwise Shown On The Plans Or As Directed By The Engineer And Provided It Is Within The Right Of Way Limits Of The Project, With The Exception Of Trees Under The Jurisdiction Of The Forest Management Bureau (fmb). 100.2.2 Clearing And Grubbing All Surface Objects And All Trees, Stumps, Roots And Other Protruding Obstructions, Not Designated To Remain, Shall Be Cleared And/or Grubbed, Including Mowing As Required, Except As Provided Below: (1) Removal Of Undisturbed Stumps And Roots And Nonperishable Solid Objects With A Minimum Depth Of One (1) Meter Below Subgrade Or Slope Of Embankment Will Not Be Required. (2) In Areas Outside Of The Grading Limits Of Cut And Embankment Areas, Stumps And Nonperishable Solid Objects Shall Be Cut Off Not More Than 150 Mm (6 Inches) Above The Ground Line Or Low Water Level. (3) In Areas To Be Rounded At The Top Of Cut Slopes, Stumps Shall Be Cut Off Flush With Or Below The Surface Of The Final Slope Line. (4) Grubbing Of Pits, Channel Changes And Ditches Will Be Required Only To The Depth Necessitated By The Proposed Excavation Within Such Areas. (5) In Areas Covered By Cogon/talahib, Wild Grass And Other Vegetations, Top Soil Shall Be Cut To A Maximum Depth Of 150 Mm Below The Original Ground Surface Or As Designated By The Engineer, And Disposed Outside The Clearing And Grubbing Limits As Indicated In The Typical Roadway Section. Except In Areas To Be Excavated, Stump Holes And Other Holes From Which Obstructions Are Removed Shall Be Backfilled With Suitable Material And Compacted To The Required Density. If Perishable Material Is Burned, It Shall Be Burned Under The Constant Care Of Component Watchmen At Such Times And In Such A Manner That The Surrounding Vegetation, Other Adjacent Property, Or Anything Designated To Remain On The Right Of Way Will Not Be Jeopardized. If Permitted, Burning Shall Be Done In Accordance With Applicable Laws, Ordinances, And Regulation. The Contractor Shall Use High Intensity Burning Procedures, (i.e., Incinerators, High Stacking Or Pit And Ditch Burning With Forced Air Supplements) That Produce Intense Burning With Little Or No Visible Smoke Emission During The Burning Process. At The Conclusion Of Each Burning Session, The Fire Shall Be Completely Extinguished So That No Smoldering Debris Remains. In The Event That The Contractor Is Directed By The Engineer Not To Start Burning Operations Or To Suspend Such Operations Because Of Hazardous Weather Conditions, Material To Be Burned Which Interferes With Subsequent Construction Operations Shall Be Moved By The Contractor To Temporary Locations Clear Of Construction Operations And Later, If Directed By The Engineer, Shall Be Placed On A Designated Spot And Burned. Materials And Debris Which Cannot Be Burned And Perishable Materials May Be Disposed Off By Methods And At Locations Approved By The Engineer, On Or Off The Project. If Disposal Is By Burying, The Debris Shall Be Placed In Layers With The Material So Disturbed To Avoid Nesting. Each Layer Shall Be Covered Or Mixed With Earth Material By The Land-fill Method To Fill All Voids. The Top Layer Of Material Buried Shall Be Covered With At Least 300 Mm (12 Inches) Of Earth Or Other Approved Material And Shall Be Graded, Shaped And Compacted To Present A Pleasing Appearance. If The Disposal Location Is Off The Project, The Contractor Shall Make All Necessary Arrangements With Property Owners In Writing For Obtaining Suitable Disposal Locations Which Are Outside The Limits Of View From The Project. The Cost Involved Shall Be Included In The Unit Bid Price. A Copy Of Such Agreement Shall Be Furnished To The Engineer. The Disposal Areas Shall Be Seeded, Fertilized And Mulched At The Contractor’s Expense. Woody Material May Be Disposed Off By Chipping. The Wood Chips May Be Used For Mulch, Slope Erosion Control Or May Be Uniformly Spread Over Selected Areas As Directed By The Engineer. Wood Chips Used As Mulch For Slope Erosion Control Shall Have A Maximum Thickness Of 12 Mm (1/2 Inch) And Faces Not Exceeding 3900 Mm2 (6 Square Inches) On Any Individual Surface Area. Wood Chips Not Designated For Use Under Other Sections Shall Be Spread Over The Designated Areas In Layers Not To Exceed 75 Mm (3 Inches) Loose Thickness. Diseased Trees Shall Be Buried Or Disposed Off As Directed By The Engineer. All Merchantable Timber In The Clearing Area Which Has Not Been Removed From The Right Of Way Prior To The Beginning Of Construction, Shall Become The Property Of The Contractor, Unless Otherwise Provided. Low Hanging Branches And Unsound Or Unsightly Branches On Trees Or Shrubs Designated To Remain Shall Be Trimmed As Directed. Branches Of Trees Extending Over The Roadbed Shall Be Trimmed To Give A Clear Height Of 6 M (20 Feet) Above The Roadbed Surface. All Trimming Shall Be Done By Skilled Workmen And In Accordance With Good Tree Surgery Practices. Timber Cut Inside The Area Staked For Clearing Shall Be Felled Within The Area To Be Cleared. 100.2.3 Individual Removal Of Trees Or Stumps Individual Trees Or Stumps Designated By The Engineer For Removal And Located In Areas Other Than Those Established For Clearing And Grubbing And Roadside Cleanup Shall Be Removed And Disposed Off As Specified Under Subsection 100.2.2 Except Trees Removed Shall Be Cut As Nearly Flush With The Ground As Practicable Without Removing Stumps. 100.3 Method Of Measurement Measurement Will Be By One Or More Of The Following Alternate Methods: 1. Area Basis. The Work To Be Paid For Shall Be The Number Of Hectares And Fractions Thereof Acceptably Cleared And Grubbed Within The Limits Indicated On The Plans Or As May Be Adjusted In Field Staking By The Engineer. Areas Not Within The Clearing And Grubbing Limits Shown On The Plans Or Not Staked For Clearing And Grubbing Will Not Be Measured For Payment. 2. Lump-sum Basis. When The Bill Of Quantities Contains A Clearing And Grubbing Lump-sum Item, No Measurement Of Area Will Be Made For Such Item. 3. Individual Unit Basis (selective Clearing). The Diameter Of Trees Will Be Measured At A Height Of 1.4 M (54 Inches) Above The Ground. Trees Less Than 150 Mm (6 Inches) In Diameter Will Not Be Measured For Payment. When Bill Of Quantities Indicates Measurement Of Trees By Individual Unit Basis, The Units Will Be Designated And Measured In Accordance With The Following Schedule Of Sizes: Diameter At Height Of 1.4 M Pay Item Designation Over 150 Mm To 900 Mm Small Over 900 Mm Large 100.4 Basis Of Payment The Accepted Quantities, Measured As Prescribed In Section 100.3, Shall Be Paid For At The Contract Unit Price For Each Of The Pay Items Listed Below That Is Included In The Bill Of Quantities, Which Price And Payment Shall Be Full Compensation For Furnishing All Labor, Equipment, Tools And Incidentals Necessary To Complete The Work Prescribed In This Item. Payment Will Be Made Under: Pay Item Number Description Unit Of Measurement 100 (1) Clearing And Grubbing Hectare 100 (2) Clearing And Grubbing Lump Sum 100 (3) Individual Removal Of Trees, Small Each 100 (4) Individual Removal Of Trees, Large Each Item 103 - Structure Excavation 103.1 Description This Item Shall Consist Of The Necessary Excavation For Foundation Of Bridges, Culverts, Underdrains, And Other Structures Not Otherwise Provided For In The Specifications. Except As Otherwise Provided For Pipe Culverts, The Backfilling Of Completed Structures And The Disposal Of All Excavated Surplus Materials, Shall Be In Accordance With These Specifications And In Reasonably Close Conformity With The Plans Or As Established By The Engineer. This Item Shall Include Necessary Diverting Of Live Streams, Bailing, Pumping, Draining, Sheeting, Bracing, And The Necessary Construction Of Cribs And Cofferdams, And Furnishing The Materials Therefore, And The Subsequent Removal Of Cribs And Cofferdams And The Placing Of All Necessary Backfill. It Shall Also Include The Furnishing And Placing Of Approved Foundation Fill Material To Replace Unsuitable Material Encountered Below The Foundation Elevation Of Structures. No Allowance Will Be Made For Classification Of Different Types Of Material Encountered. 103.2 Construction Requirements 103.2.1 Clearing And Grubbing Prior To Starting Excavation Operations In Any Area, All Necessary Clearing And Grubbing In That Area Shall Have Been Performed In Accordance With Item 100, Clearing And Grubbing. 103.2.2 Excavation (1) General, All Structures. The Contractor Shall Notify The Engineer Sufficiently In Advance Of The Beginning Of Any Excavation So That Cross-sectional Elevations And Measurements May Be Taken On The Undisturbed Ground. The Natural Ground Adjacent To The Structure Shall Not Be Disturbed Without Permission Of The Engineer. Trenches Or Foundation Pits For Structures Or Structure Footings Shall Be Excavated To The Lines And Grades Or Elevations Shown On The Plans Or As Staked By The Engineer. They Shall Be Of Sufficient Size To Permit The Placing Of Structures Or Structure Footings Of The Full Width And Length Shown. The Elevations Of The Bottoms Of Footings, As Shown On The Plans, Shall Be Considered As Approximate Only And The Engineer May Order, In Writing, Such Changes In Dimensions Or Elevations Of Footings As May Be Deemed Necessary, To Secure A Satisfactory Foundation. Boulders, Logs, And Other Objectionable Materials Encountered In Excavation Shall Be Removed. After Each Excavation Is Completed, The Contractor Shall Notify The Engineer To That Effect And No Footing, Bedding Material Or Pipe Culvert Shall Be Placed Until The Engineer Has Approved The Depth Of Excavation And The Character Of The Foundation Material. (2) Structures Other Than Pipe Culverts. All Rock Or Other Hard Foundation Materials Shall Be Cleaned Of All Loose Materials, And Cut To A Firm Surface, Either Level, Stepped, Or Serrated As Directed By The Engineer. All Seams Or Crevices Shall Be Cleaned And Grouted. All Loose And Disintegrated Rocks And Thin Strata Shall Be Removed. When The Footing Is To Rest On Material Other Than Rock, Excavation To Final Grade Shall Not Be Made Until Just Before The Footing Is To Be Placed. When The Foundation Material Is Soft Or Mucky Or Otherwise Unsuitable, As Determined By The Engineer, The Contractor Shall Remove The Unsuitable Material And Backfill With Approved Granular Material. This Foundation Fill Shall Be Placed And Compacted In 150 Mm Layers Up To The Foundation Elevation. When Foundation Piles Are Used, The Excavation Of Each Pit Shall Be Completed Before The Piles Are Driven And Any Placing Of Foundation Fill Shall Be Done After The Piles Are Driven. After The Driving Is Completed, All Loose And Displaced Materials Shall Be Removed, Leaving A Smooth, Solid Bed To Receive The Footing. (3) Pipe Culverts. The Width Of The Pipe Trench Shall Be Sufficient To Permit Satisfactory Jointing Of The Pipe And Thorough Tamping Of The Bedding Material Under And Around The Pipe. Where Rock, Hardpan, Or Other Unyielding Material Is Encountered, It Shall Be Removed Below The Foundation Grade For A Depth Of At Least 300 Mm Or 4 Mm For Each 100 Mm Of Fill Over The Top Of Pipe, Whichever Is Greater, But Not To Exceed Three-quarters Of The Vertical Inside Diameter Of The Pipe. The Width Of The Excavation Shall Be At Least 300 Mm Greater Than The Horizontal Outside Diameter Of The Pipe. The Excavation Below Grade Shall Be Backfilled With Selected Fine Compressible Material, Such As Silty Clay Or Loam, And Lightly Compacted In Layers Not Over 150 Mm In Uncompacted Depth To Form A Uniform But Yielding Foundation. Where A Firm Foundation Is Not Encountered At The Grade Established, Due To Soft, Spongy, Or Other Unstable Soil, Such Unstable Soil Under The Pipe And For A Width Of At Least One Diameter On Each Side Of The Pipe Shall Be Removed To The Depth Directed By The Engineer And Replaced With Approved Granular Foundation Fill Material Properly Compacted To Provide Adequate Support For The Pipe, Unless Other Special Construction Methods Are Called For On The Plans. The Foundation Surface Shall Provide A Firm Foundation Of Uniform Density Throughout The Length Of The Culvert And If Directed By The Engineer, Shall Be Cambered In The Direction Parallel To The Pipe Centerline. Where Pipe Culverts Are To Be Placed In Trenches Excavated In Embankments, The Excavation Of Each Trench Shall Be Performed After The Embankment Has Been Constructed To A Plane Parallel To The Proposed Profile Grade And To Such Height Above The Bottom Of The Pipe As Shown On The Plans Or Directed By The Engineer. 103.2.3 Utilization Of Excavated Materials All Excavated Materials, So Far As Suitable, Shall Be Utilized As Backfill Or Embankment. The Surplus Materials Shall Be Disposed Of In Such Manner As Not To Obstruct The Stream Or Otherwise Impair The Efficiency Or Appearance Of The Structure. No Excavated Materials Shall Be Deposited At Any Time So As To Endanger The Partly Finished Structure. 103.2.4 Cofferdams Suitable And Practically Watertight Cofferdams Shall Be Used Wherever Water-bearing Strata Are Encountered Above The Elevation Of The Bottom Of The Excavation. If Requested, The Contractor Shall Submit Drawings Showing His Proposed Method Of Cofferdam Construction, As Directed By The Engineer. Cofferdams Or Cribs For Foundation Construction Shall In General, Be Carried Well Below The Bottoms Of The Footings And Shall Be Well Braced And As Nearly Watertight As Practicable. In General, The Interior Dimensions Of Cofferdams Shall Be Such As To Give Sufficient Clearance For The Construction Of Forms And The Inspection Of Their Exteriors, And To Permit Pumping Outside Of The Forms. Cofferdams Or Cribs Which Are Tilted Or Moved Laterally During The Process Of Sinking Shall Be Righted Or Enlarged So As To Provide The Necessary Clearance. When Conditions Are Encountered Which, As Determined By The Engineer, Render It Impracticable To Dewater The Foundation Before Placing The Footing, The Engineer May Require The Construction Of A Concrete Foundation Seal Of Such Dimensions As He May Consider Necessary, And Of Such Thickness As To Resist Any Possible Uplift. The Concrete For Such Seal Shall Be Placed As Shown On The Plans Or Directed By The Engineer. The Foundation Shall Then Be Dewatered And The Footing Placed. When Weighted Cribs Are Employed And The Mass Is Utilized To Overcome Partially The Hydrostatic Pressure Acting Against The Bottom Of The Foundation Seal, Special Anchorage Such As Dowels Or Keys Shall Be Provided To Transfer The Entire Mass Of The Crib To The Foundation Seal. When A Foundation Seal Is Placed Under Water, The Cofferdams Shall Be Vented Or Ported At Low Water Level As Directed. Cofferdams Shall Be Constructed So As To Protect Green Concrete Against Damage From Sudden Rising Of The Stream And To Prevent Damage To The Foundation By Erosion. No Timber Or Bracing Shall Be Left 30 In Cofferdams Or Cribs In Such A Way As To Extend Into Substructure Masonry, Without Written Permission From The Engineer. Any Pumping That May Be Permitted From The Interior Of Any Foundation Enclosure Shall Be Done In Such A Manner As To Preclude The Possibility Of Any Portion Of The Concrete Material Being Carried Away. Any Pumping Required During The Placing Of Concrete, Or For A Period Of At Least 24 Hours Thereafter, Shall Be Done From A Suitable Sump Located Outside The Concrete Forms. Pumping To Dewater A Sealed Cofferdam Shall Not Commence Until The Seal Has Set Sufficiently To Withstand The Hydrostatic Pressure. Unless Otherwise Provided, Cofferdams Or Cribs, With All Sheeting And Bracing Involved Therewith, Shall Be Removed By The Contractor After The Completion Of The Substructure. Removal Shall Be Effected In Such Manner As Not To Disturb Or Mar Finished Masonry. 103.2.5 Preservation Of Channel Unless Otherwise Permitted, No Excavation Shall Be Made Outside Of Caissons, Cribs, Cofferdams, Or Sheet Piling, And The Natural Stream Bed Adjacent To Structure Shall Not Be Disturbed Without Permission From The Engineer. If Any Excavation Or Dredging Is Made At The Side Of The Structure Before Caissons, Cribs, Or Cofferdams Are Sunk In Place, The Contractor Shall, After The Foundation Base Is In Place, Backfill All Such Excavations To The Original Ground Surface Or Stream Bed With Material Satisfactory To The Engineer. 103.2.6 Backfill And Embankment For Structures Other Than Pipe Culverts Excavated Areas Around Structures Shall Be Backfilled With Free Draining Granular Material Approved By The Engineer And Placed In Horizontal Layers Not Over 150 Mm In Thickness, To The Level Of The Original Ground Surface. Each Layer Shall Be Moistened Or Dried As Required And Thoroughly Compacted With Mechanical Tampers. In Placing Backfills Or Embankment, The Material Shall Be Placed Simultaneously In So Far As Possible To Approximately The Same Elevation On Both Sides Of An Abutment, Pier, Or Wall. If Conditions Require Placing Backfill Or Embankment Appreciably Higher On One Side Than On The Opposite Side, The Additional Material On The Higher Side Shall Not Be Placed Until The Masonry Has Been In Place For 14 Days, Or Until Tests Made By The Laboratory Under The Supervision Of The Engineer Establishes That The Masonry Has Attained Sufficient Strength To Withstand Any Pressure Created By The Methods Used And Materials Placed Without Damage Or Strain Beyond A Safe Factor. Backfill Or Embankment Shall Not Be Placed Behind The Walls Of Concrete Culverts Or Abutments Or Rigid Frame Structures Until The Top Slab Is Placed And Cured. Backfill And Embankment Behind Abutments Held At The Top By The Superstructure, And Behind The Sidewalls Of Culverts, Shall Be Carried Up Simultaneously Behind Opposite Abutments Or Sidewalls. All Embankments Adjacent To Structures Shall Be Constructed In Horizontal Layers And Compacted As Prescribed In Subsection 104.3.3 Except That Mechanical Tampers May Be Used For The Required Compaction. Special Care Shall Be Taken To Prevent Any Wedging Action Against The Structure, And Slopes Bounding Or Within The Areas To Be Filled Shall Be Benched Or Serrated To Prevent Wedge Action. The Placing Of Embankment And The Benching Of Slopes Shall Continue In Such A Manner That At All Times There Will Be Horizontal Berm Of Thoroughly Compacted Material For A Distance At Least Equal To The Height Of The Abutment Or Wall To Be Backfilled Against Except Insofar As Undisturbed Material Obtrudes Upon The Area. Broken Rock Or Coarse Sand And Gravel Shall Be Provided For A Drainage Filter At Weepholes As Shown On The Plans. 103.2.7 Bedding, Backfill, And Embankment For Pipe Culverts Bedding, Backfill And Embankment For Pipe Culverts Shall Be Done In Accordance With Item 500, Pipe Culverts And Storm Drains. 103.3 Method Of Measurement 103.3.1 Structure Excavation The Volume Of Excavation To Be Paid For Will Be The Number Of Cubic Meters Measured In Original Position Of Material Acceptably Excavated In Conformity With The Plans Or As Directed By The Engineer, But In No Case, Except As Noted, Will Any Of The Following Volumes Be Included In The Measurement For Payment: (1) The Volume Outside Of Vertical Planes 450 Mm Outside Of And Parallel To The Neat Lines Of Footings And The Inside Walls Of Pipe And Pipe-arch Culverts At Their Widest Horizontal Dimensions. (2) The Volume Of Excavation For Culvert And Sections Outside The Vertical Plane For Culverts Stipulated In (1) Above. (3) The Volume Outside Of Neat Lines Of Underdrains As Shown On The Plans, And Outside The Limits Of Foundation Fill As Ordered By The Engineer. (4) The Volume Included Within The Staked Limits Of The Roadway Excavation, Contiguous Channel Changes, Ditches, Etc., For Which Payment Is Otherwise Provided In The Specification. (5) Volume Of Water Or Other Liquid Resulting From Construction Operations And Which Can Be Pumped Or Drained Away. (6) The Volume Of Any Excavation Performed Prior To The Taking Of Elevations And Measurements Of The Undisturbed Ground. (7) The Volume Of Any Material Rehandled, Except That Where The Plans Indicate Or The Engineer Directs The Excavation After Embankment Has Been Placed And Except That When Installation Of Pipe Culverts By The Imperfect Trench Method Specified In Item 500 Is Required, The Volume Of Material Reexcavated As Directed Will Be Included. (8) The Volume Of Excavation For Footings Ordered At A Depth More Than 1.5 M Below The Lowest Elevation For Such Footings Shown On The Original Contract Plans, Unless The Bill Of Quantities Contains A Pay Item For Excavation Ordered Below The Elevations Shown On The Plans For Individual Footings. Item 404 – Reinforcing Steel Description This Item Shall Consist Of Furnishing, Bending, Fabricating And Placing Of Steel Reinforcement Of The Type, Size, Shape And Grade Required In Accordance With This Specification And In Conformity With The Requirements Shown On The Plans Or As Directed By The Engineer. Strictly Implement The Usage Of Grade 40 Reinforcing Steel. Material Requirements Reinforcing Steel Shall Meet The Requirements Of Item 710, Reinforcing Steel And Wire Rope. Construction Requirements 404.3.1 Order Lists Before Materials Are Ordered, All Order Lists And Bending Diagrams Shall Be Furnished By The Contractor, For Approval Of The Engineer. The Approval Of Order Lists And Bending Diagrams By The Engineer Shall In No Way Relieve The Contractor Of Responsibility For The Correctness Of Such Lists And Diagrams. Any Expense Incident To The Revisions Of Materials Furnished In Accordance With Such Lists And Diagrams To Make Them Comply With The Plans Shall Be Borne By The Contractor. 404.3.2 Protection Of Material Steel Reinforcement Shall Be Stored Above The Surface Of The Ground Upon Platforms, Skids, Or Other Supports And Shall Be Protected As Far As Practicable From Mechanical Injury And Surface Deterioration Caused By Exposure To Conditions Producing Rust. When Placed In The Work, Reinforcement Shall Be Free From Dirt, Detrimental Rust, Loose Scale, Paint, Grease, Oil, Or Other Foreign Materials. Reinforcement Shall Be Free From Injurious Defects Such As Cracks And Laminations. Rust, Surface Seams, Surface Irregularities Or Mill Scale Will Not Be Cause For Rejection, Provided The Minimum Dimensions, Cross Sectional Area And Tensile Properties Of A Hand Wire Brushed Specimen Meets The Physical Requirements For The Size And Grade Of Steel Specified. Bending All Reinforcing Bars Requiring Bending Shall Be Cold-bent To The Shapes Shown On The Plans Or Required By The Engineer. Bars Shall Be Bent Around A Circular Pin Having The Following Diameters (d) In Relation To The Diameter Of The Bar (d): Nominal Diameter, D, Mm Pin Diameter (d) 10 To 20 25 To 28 32 And Greater 6d 8d 10d Bends And Hooks In Stirrups Or Ties May Be Bent To The Diameter Of The Principal Bar Enclosed Therein. Placing And Fastening All Steel Reinforcement Shall Be Accurately Placed In The Position Shown On The Plans Or Required By The Engineer And Firmly Held There During The Placing And Setting Of The Concrete. Bars Shall Be Tied At All Intersections Except Where Spacing Is Less Than 300mm In Each Directions, In Which Case, Alternate Intersections Shall Be Tied. Ties Shall Be Fastened On The Inside. Distance From The Forms Shall Be Maintained By Means Of Stays, Blocks, Ties, Hangers, Or Other Approved Supports, So That It Does Not Vary From The Position Indicated On The Plans By More Than 6mm. Blocks For Holding Reinforcement From Contact With The Forms Shall Be Precast Mortar Blocks Of Approved Shapes And Dimensions. Layers Of Bars Shall Be Separated By Precast Mortar Blocks Or By Other Equally Suitable Devices. The Use Of Pebbles, Pieces Of Broken Stone Or Brick, Metal Pipe And Wooden Blocks Shall Not Be Permitted. Unless Otherwise Shown On The Plans Or Required By The Engineer, The Minimum Distance Between Bars Shall Be 40mm. Reinforcement In Any Member Shall Be Placed And Then Inspected And Approved By The Engineer Before The Placing Of Concrete Begins. Concrete Placed In Violation Of This Provision May Be Rejected And Removal May Be Required. If Fabric Reinforcement Is Shipped In Rolls, It Shall Be Straightened Before Being Placed. Bundled Bars Shall Be Tied Together At Not More Than 1.8m Intervals. Splicing All Reinforcement Shall Be Furnished In The Full Lengths Indicated On The Plans. Splicing Of Bars, Except Where Shown On The Plans, Will Not Be Permitted Without The Written Approval Of The Engineer. Splices Shall Be Staggered As Far As Possible And With A Minimum Separation Of Not Less Than 40 Bar Diameters. Not More Than One-third Of The Bars May Be Spliced In The Same Cross-section, Except Where Shown On The Plans. Unless Otherwise Shown On The Plans, Bars Shall Be Lapped A Minimum Distance Of: Splice Type Grade 40 Min. Lap Grade 60 Min. Lap But Not Less Than Tension 24 Bar Dia 36 Bar Dia 300 Mm Compression 20 Bar Dia 24 Bar Dia 300 Mm In Lapped Splices, The Bars Shall Be Placed In Contact And Wired Together. Lapped Splices Will Not Be Permitted At Locations Where The Concrete Section Is Insufficient To Provide Minimum Clear Distance Of One And One-third The Maximum Size Of Coarse Aggregate Between The Splice And The Nearest Adjacent Bar. Welding Of Reinforcing Steel Shall Be Done Only If Detailed On The Plans Or If Authorized By The Engineer In Writing. Spiral Reinforcement Shall Be Spliced By Lapping At Least One And A Half Turns Or By Butt Welding Unless Otherwise Shown On The Plans. Lapping Of Bar Mat Sheets Of Mesh Or Bar Mat Reinforcement Shall Overlap Each Other Sufficiently To Maintain A Uniform Strength And Shall Be Securely Fastened At The Ends And Edges. The Overlap Shall Not Be Less Than One Mesh In Width. Method Of Measurement The Quantity Of Reinforcing Steel To Be Paid For Will Be The Final Quantity Placed And Accepted In The Completed Structure. No Allowance Will Be Made For Tie-wires, Separators, Wire Chairs And Other Material Used In Fastening The Reinforcing Steel In Place. If Bars Are Substituted Upon The Contractor’s Request And Approved By The Engineer And As A Result Thereof More Steel Is Used Than Specified, Only The Mass Specified Shall Be Measured For Payment. No Measurement Or Payment Will Be Made For Splices Added By The Contractor Unless Directed Or Approved By The Engineer. When There Is No Item For Reinforcing Steel In The Bill Of Quantities, Costs Will Be Considered As Incidental To The Other Items In The Bill Of Quantities. Basis Of Payment The Accepted Quantity, Measured As Prescribed In Section 404.4, Shall Be Paid For At The Contract Unit Price For Reinforcing Steel Which Price And Payment Shall Be Full Compensation For Furnishing And Placing All Materials, Including All Labor, Equipment, Tools And Incidentals Necessary To Complete The Work Prescribed In This Item. Payment Will Be Made Under: Pay Item Number Description Unit Of Measurement 404 Reinforcing Steel Kilogram Item 405 – Structural Concrete Description 405.1.1 Scope This Item Shall Consist Of Furnishing, Bending, Placing And Finishing Concrete In All Structures Except Pavements In Accordance With This Specification And Conforming To The Lines, Grades, And Dimensions Shown On The Plans. Concrete Shall Consist Of A Mixture Of Portland Cement, Fine Aggregate, Coarse Aggregate, Admixture When Specified, And Water Mixed In The Proportions Specified Or Approved By The Engineer. The Structural Strength Of Concrete Shall Be 24 Mpa. 405.1.2 Classes And Uses Of Concrete Five Classes Of Concrete Are Provided For In This Item, Namely: A, B, C, P And Seal. Each Class Shall Be Used In That Part Of The Structure As Called For On The Plans. The Classes Of Concrete Will Generally Be Used As Follows: Class A – All Superstructures And Heavily Reinforced Substructures. The Important Parts Of The Structure Included Are Slabs, Beams, Girders, Columns, Arch Ribs, Box Culverts, Reinforced Abutments, Retaining Walls, And Reinforced Footings. Class B – Footings, Pedestals, Massive Pier Shafts, Pipe Bedding, And Gravity Walls, Unreinforced Or With Only A Small Amount Of Reinforcement. Class C – Thin Reinforced Sections, Railings, Precast R.c. Piles And Cribbing And For Filler In Steel Grid Floors. Class P – Prestressed Concrete Structures And Members. Seal – Concrete Deposited In Water. Material Requirements 405.2.1 Portland Cement It Shall Conform To All The Requirements Of Subsection 311.2.1. Fine Aggregate It Shall Conform To All The Requirements Of Subsection 311.2.2. Coarse Aggregate It Shall Conform All The Requirements Of Subsection 311.2.3 Except That Gradation Shall Conform To Table 405.1. Table 405.1 – Grading Requirements For Coarse Aggregate Sieve Designation Mass Percent Passing Standard Mm Alternate Us Standard Class A Class B Class C Class P Class Seal 63 50 37.5 25 19.0 12.5 9.5 4.75 2-1/2” 2” 1-1/2” 1” ¾” ½” 3/8” No.4 100 95 – 100 - 35 – 70 - 10 – 30 0 - 5 100 95 – 100 - 35 – 70 - 10 – 30 - 0 - 5 100 90 – 100 40 – 70 0 – 15* 100 95 – 100 - 20 – 55 0 – 10* 100 95 – 100 - 25 – 60 - 0 – 10* * The Measured Cement Content Shall Be Within Plus (+) Or Minus (-) 2 Mass Percent Of The Design Cement Content. Water It Shall Conform To The Requirements Of Subsection 311.2.4 Reinforcing Steel It Shall Conform To The Requirements Of Item 710, Reinforcing Steel And Wire Rope. Admixtures Admixtures Shall Conform To The Requirements Of Subsection 311.2.7 Curing Materials Curing Materials Shall Conform To The Requirements Of Subsection 311.2.8. Expansion Joint Materials Expansion Joint Materials Shall Be: Preformed Sponge Rubber And Cork, Conforming To Aashto M 153. Hot-poured Elastic Type, Conforming To Aashto M 173. Preformed Fillers, Conforming To Aashto M 213. Elastomeric Compression Joint Seals These Shall Conform To Aashto M 220. Elastomeric Bearing Pads These Shall Conform To Aashto M 251 Or Item 412 – Elastomeric Bearing Pads. Storage Of Cement And Aggregates Storage Of Cement And Aggregates Shall Conform To All The Requirements Of Subsection 311.2.10. Sampling And Testing Of Structural Concrete As Work Progresses, At Least One (1) Sample Consisting Of Three (3) Concrete Cylinder Test Specimens, 150 X 300mm (6 X 12 Inches), Shall Be Taken From Each Seventy-five (75) Cubic Meters Of Each Class Of Concrete Or Fraction Thereof Placed Each Day. Compliance With The Requirements Of This Section Shall Be Determined In Accordance With The Following Standard Methods Of Aashto: Sampling Of Fresh Concrete Weight Per Cubic Metre And Air Content (gravi- Metric) Of Concrete Sieve Analysis Of Fine And Coarse Aggregates Slump Of Portland Cement Concrete Specific Gravity And Absorption Of Fine Aggregate T 141 T 121 T 27 T 119 T 84 Tests For Strength Shall Be Made In Accordance With The Following: Making And Curing Concrete Compressive And Flexural Tests Specimens In The Field Compressive Strength Of Molded Concrete Cylinders T 23 T 22 Production Requirements Proportioning And Strength Of Structural Concrete The Concrete Materials Shall Be Proportioned In Accordance With The Requirements For Each Class Of Concrete As Specified In Table 405.2, Using The Absolute Volume Method As Outlined In The American Concrete Institute (aci) Standard 211.1. “recommended Practice For Selecting Proportions For Normal And Heavyweight Concrete”. Other Methods Of Proportioning May Be Employed In The Mix Design With Prior Approval Of The Engineer. The Mix Shall Either Be Designed Or Approved By The Engineer. A Change In The Source Of Materials During The Progress Of Work May Necessitate A New Mix Design. The Strength Requirements For Each Class Of Concrete Shall Be As Specified In Table 405.2. Table 405.2 - Composition And Strength Of Concrete For Use In Structures Class Of Concrete Minimum Cement Content Per M3 Kg (bag**) Maximum Water/ Cement Ratio Kg/kg Consistency Range In Slump Mm (inch) Designated Size Of Coarse Aggregate Square Opening Std. Mm Minimum Compressive Strength Of 150x300mm Concrete Cylinder Specimen At 28 Days, Mn/m2 (psi) A B C P Seal 360 (9 Bags) 320 (8 Bags) 380 (9.5 Bags) 440 (11 Bags) 380 (9.5 Bags) 0.53 0.58 0.55 0.49 0.58 50 – 100 (2 – 4) 50 – 100 (2 – 4) 50 – 100 (2 – 4) 100 Max. (4 Max.) 100 – 200 (4 - 8) 37.5 – 4.75 (1-1/2” – No. 4) 50 – 4.75 (2” – No. 4) 12.5 – 4.75 (1/2” – No. 4) 19.0 – 4.75 (3/4” – No. 4) 25 – 4.75 (1” – No. 4) 20.7 (3000) 16.5 (2400) 20.7 (3000) 37.7 (5000) 20.7 (3000) * The Measured Cement Content Shall Be Within Plus Or Minus 2 Mass Percent Of The Design Cement Content. ** Based On 40 Kg/bag 405.4.2 Consistency Concrete Shall Have A Consistency Such That It Will Be Workable In The Required Position. It Shall Be Of Such A Consistency That It Will Flow Around Reinforcing Steel But Individual Particles Of The Coarse Aggregate When Isolated Shall Show A Coating Of Mortar Containing Its Proportionate Amount Of Sand. The Consistency Of Concrete Shall Be Gauged By The Ability Of The Equipment To Properly Place It And Not By The Difficulty In Mixing And Transporting. The Quantity Of Mixing Water Shall Be Determined By The Engineer And Shall Not Be Varied Without His Consent. Concrete As Dry As It Is Practical To Place With The Equipment Specified Shall Be Used. 405.4.3 Batching Measuring And Batching Of Materials Shall Be Done At A Batching Plant. Portland Cement Either Sacked Or Bulk Cement May Be Used. No Fraction Of A Sack Of Cement Shall Be Used In A Batch Of Concrete Unless The Cement Is Weighed. All Bulk Cement Shall Be Weighed On An Approved Weighing Device. The Bulk Cement Weighing Hopper Shall Be Properly Sealed And Vented To Preclude Dusting Operation. The Discharge Chute Shall Not Be Suspended From The Weighing Hopper And Shall Be So Arranged That Cement Will Neither Be Lodged In It Nor Leak From It. Accuracy Of Batching Shall Be Within Plus (+) Or Minus (-) 1 Mass Percent. Water Water May Be Measured Either By Volume Or By Weight. The Accuracy Of Measuring The Water Shall Be Within A Range Of Error Of Not More Than 1 Percent. Aggregates Stockpiling Of Aggregates Shall Be In Accordance With Subsection 311.2.10. All Aggregates Whether Produced Or Handled By Hydraulic Methods Or Washed, Shall Be Stockpiled Or Binned For Draining For At Least 12 Hours Prior To Batching. Rail Shipment Requiring More Than12 Hours Will Be Accepted As Adequate Binning Only If The Car Bodies Permit Free Drainage. If The Aggregates Contain High Or Non-uniform Moisture Content, Storage Or Stockpile Period In Excess Of 12 Hours May Be Required By The Engineer. Batching Shall Be Conducted As To Result In A 2 Mass Percent Maximum Tolerance For The Required Materials. Bins And Scales The Batching Plant Shall Include Separate Bins For Bulk Cement, Fine Aggregate And For Each Size Of Coarse Aggregate, A Weighing Hopper, And Scales Capable Of Determining Accurately The Mass Of Each Component Of The Batch. Scales Shall Be Accurate To One-half (0.5) Percent Throughout The Range Used. Batching When Batches Are Hauled To The Mixer, Bulk Cement Shall Be Transported Either In Waterproof Compartments Or Between The Fine And Coarse Aggregate. When Cement Is Placed In Contact With Moist Aggregates, Batches Will Be Rejected Unless Mixed Within 1-1/2 Hours Of Such Contact. Sacked Cement May Be Transported On Top Of The Aggregates. Batches Shall Be Delivered To The Mixer Separate And Intact. Each Batch Shall Be Dumped Cleanly Into The Mixer Without Loss, And, When More Than One Batch Is Carried On The Truck, Without Spilling Of Material From One Batch Compartment Into Another. Admixtures The Contractor Shall Follow An Approved Procedure For Adding The Specified Amount Of Admixture To Each Batch And Will Be Responsible For Its Uniform Operation During The Progress Of The Work. He Shall Provide Separate Scales For The Admixtures Which Are To Be Proportioned By Weight, And Accurate Measures For Those To Be Proportioned By Volume. Admixtures Shall Be Measured Into The Mixer With An Accuracy Of Plus Or Minus Three (3) Percent. The Use Of Calcium Chloride As An Admixture Will Not Be Permitted. 405.4.4 Mixing And Delivery Concrete May Be Mixed At The Site Of Construction, At A Central Point Or By A Combination Of Central Point And Truck Mixing Or By A Combination Of Central Point Mixing And Truck Agitating. Mixing And Delivery Of Concrete Shall Be In Accordance With The Appropriate Requirements Of Aashto M 157 Except As Modified In The Following Paragraphs Of This Section, For Truck Mixing Or A Combination Of Central Point And Truck Mixing Or Truck Agitating. Delivery Of Concrete Shall Be Regulated So That Placing Is At A Continuous Rate Unless Delayed By The Placing Operations. The Intervals Between Delivery Of Batches Shall Not Be So Great As To Allow The Concrete Inplace To Harden Partially, And In No Case Shall Such An Interval Exceed 30 Minutes. In Exceptional Cases And When Volumetric Measurements Are Authorized, For Small Project Requiring Less Than 75 Cu.m. Per Day Of Pouring, The Weight Proportions Shall Be Converted To Equivalent Volumetric Proportions. In Such Cases, Suitable Allowance Shall Be Made For Variations In The Moisture Condition Of The Aggregates, Including The Bulking Effect In The Fine Aggregate. Batching And Mixing Shall Be In Accordance With Astm C 685, Section 6 Through 9. Concrete Mixing, By Chute Is Allowed Provided That A Weighing Scales For Determining The Batch Weight Will Be Used. For Batch Mixing At The Site Of Construction Or At A Central Point, A Batch Mixer Of An Approved Type Shall Be Used. Mixer Having A Rated Capacity Of Less Than A One-bag Batch Shall Not Be Used. The Volume Of Concrete Mixed Per Batch Shall Not Exceed The Mixer’s Nominal Capacity As Shown On The Manufacturer’s Standard Rating Plate On The Mixer Except That An Overload Up To 10 Percent Above The Mixer’s Nominal Capacity May Be Permitted, Provided Concrete Test Data For Strength, Segregation, And Uniform Consistency Are Satisfactory And Provided No Spillage Of Concrete Takes Place. The Batch Shall Be So Charge Into The Drum That A Portion Of The Water Shall Enter In Advance Of The Cement And Aggregates. The Flow Of Water Shall Be Uniform And All Water Shall Be In The Drum By The End Of The First 15 Seconds Of The Mixing Period. Mixing Time Shall Be Measured From The Time All Materials, Except Water, Are In The Drum. Mixing Time Shall Not Be Less Than 60 Seconds For Mixers Having A Capacity Of 1.5m3 Or Less. For Mixers Having A Capacity Greater Than 1.5m3, The Mixing Time Shall Not Be Less Than 90 Seconds. If Timing Starts, The Instant The Skip Reaches Its Maximum Raised Position, 4 Seconds Shall Be Added To The Specified Mixing Time. Mixing Time Ends When The Discharge Chute Opens. The Mixer Shall Be Operated At The Drum Speed As Shown On The Manufacturer’s Name Plate On The Mixer. Any Concrete Mixed Less Than The Specified Time Shall Be Discarded And Disposed Off By The Contractor At His Own Expenses. The Timing Device On Stationary Mixers Shall Be Equipped With A Bell Or Other Suitable Warning Device Adjusted To Give A Clearly Audible Signal Each Time The Lock Is Released. In Case Of Failure Of The Timing Device, The Contractor Will Be Permitted To Continue Operations While It Is Being Repaired, Provided He Furnishes An Approved Timepiece Equipped With Minute And Second Hands. If The Timing Device Is Not Placed In Good Working Order Within 24 Hours, Further Use Of The Mixer Will Be Prohibited Until Repairs Are Made. Retempering Concrete Will Not Be Permitted. Admixtures For Increasing The Workability, For Retarding The Set, Or For Accelerating The Set Or Improving The Pumping Characteristics Of The Concrete Will Be Permitted Only When Specifically Provided For In The Contract, Or Authorized In Writing By The Engineer. Mixing Concrete: General Concrete Shall Be Thoroughly Mixed In A Mixer Of An Approved Size And Type That Will Insure A Uniform Distribution Of The Materials Throughout The Mass. All Concrete Shall Be Mixed In Mechanically Operated Mixers. Mixing Plant And Equipment For Transporting And Placing Concrete Shall Be Arranged With An Ample Auxiliary Installation To Provide A Minimum Supply Of Concrete In Case Of Breakdown Of Machinery Or In Case The Normal Supply Of Concrete Is Disrupted. The Auxiliary Supply Of Concrete Shall Be Sufficient To Complete The Casting Of A Section Up To A Construction Joint That Will Meet The Approval Of The Engineer. Equipment Having Components Made Of Aluminum Or Magnesium Alloys, Which Would Have Contact With Plastic Concrete During Mixing, Transporting Or Pumping Of Portland Cement Concrete, Shall Not Be Used. Concrete Mixers Shall Be Equipped With Adequate Water Storage And A Device Of Accurately Measuring And Automatically Controlling The Amount Of Water Used. Materials Shall Be Measured By Weighing. The Apparatus Provided For Weighing The Aggregates And Cement Shall Be Suitably Designed And Constructed For This Purpose. The Accuracy Of All Weighing Devices Except That For Water Shall Be Such That Successive Quantities Can Be Measured To Within One Percent Of The Desired Amounts. The Water Measuring Device Shall Be Accurate To Plus Or Minus 0.5 Mass Percent. All Measuring Devices Shall Be Subject To The Approval Of The Engineer. Scales And Measuring Devices Shall Be Tested At The Expense Of The Contractor As Frequently As The Engineer May Deem Necessary To Insure Their Accuracy. Weighing Equipment Shall Be Insulated Against Vibration Or Movement Of Other Operating Equipment In The Plant. When The Entire Plant Is Running, The Scale Reading At Cut-off Shall Not Vary From The Weight Designated By The Engineer More Than One Mass Percent For Cement, 1-1/2 Mass Percent For Any Size Of Aggregate, Or One (1) Mass Percent For The Total Aggregate In Any Batch. Mixing Concrete At Site Concrete Mixers May Be Of The Revolving Drum Or The Revolving Blade Type And The Mixing Drum Or Blades Shall Be Operated Uniformly At The Mixing Speed Recommended By The Manufacturer. The Pick-up And Throw-over Blades Of Mixers Shall Be Restored Or Replaced When Any Part Or Section Is Worn 20mm Or More Below The Original Height Of The Manufacturer’s Design. Mixers And Agitators Which Have An Accumulation Of Hard Concrete Or Mortar Shall Not Be Used. When Bulk Cement Is Used And Volume Of The Batch Is 0.5m3 Or More, The Scale And Weigh Hopper For Portland Cement Shall Be Separate And Distinct From The Aggregate Hopper Or Hoppers. The Discharge Mechanism Of The Bulk Cement Weigh Hopper Shall Be Interlocked Against Opening Before The Full Amount Of Cement Is In The Hopper. The Discharging Mechanism Shall Also Be Interlocked Against Opening When The Amount Of Cement In The Hopper Is Underweight By More Than One (1) Mass Percent Or Overweight By More Than 3 Mass Percent Of The Amount Specified. When The Aggregate Contains More Water Than The Quantity Necessary To Produce A Saturated Surface Dry Condition, Representative Samples Shall Be Taken And The Moisture Content Determined For Each Kind Of Aggregate. The Batch Shall Be So Charged Into The Mixer That Some Water Will Enter In Advance Of Cement And Aggregate. All Water Shall Be In The Drum By The End Of The First Quarter Of The Specified Mixing Time. Cement Shall Be Batched And Charged Into The Mixer So That It Will Not Result In Loss Of Cement Due To The Effect Of Wind, Or In Accumulation Of Cement On Surface Of Conveyors Or Hoppers, Or In Other Conditions Which Reduce Or Vary The Required Quantity Of Cement In The Concrete Mixture. The Entire Content Of A Batch Mixer Shall Be Removed From The Drum Before Materials For A Succeeding Batch Are Placed Therein. The Materials Composing A Batch Except Water Shall Be Deposited Simultaneously Into The Mixer. All Concrete Shall Be Mixed For A Period Of Not Less Than 1-1/2 Minutes After All Materials, Including Water, Are In The Mixer. During The Period Of Mixing, The Mixer Shall Operate At The Speed For Which It Has Been Designed. Mixers Shall Be Operated With An Automatic Timing Device That Can Be Locked By The Engineer. The Time Device And Discharge Mechanics Shall Be So Interlocked That During Normal Operation No Part Of The Batch Will Be Charged Until The Specified Mixing Time Has Elapsed. The First Batch Of Concrete Materials Placed In The Mixer Shall Contain A Sufficient Excess Of Cement, Sand, And Water To Coat Inside Of The Drum Without Reducing The Required Mortar Content Of The Mix. When Mixing Is To Cease For A Period Of One Hour Or More, The Mixer Shall Be Thoroughly Cleaned. Mixing Concrete At Central Plant Mixing At Central Plant Shall Conform To The Requirements For Mixing At The Site. Mixing Concrete In Truck Truck Mixers, Unless Otherwise Authorized By The Engineer, Shall Be Of The Revolving Drum Type, Water-tight, And So Constructed That The Concrete Can Be Mixed To Insure A Uniform Distribution Of Materials Throughout The Mass. All Solid Materials For The Concrete Shall Be Accurately Measured And Charged Into The Drum At The Proportioning Plant. Except As Subsequently Provided, The Truck Mixer Shall Be Equipped With A Device By Which The Quantity Of Water Added Can Be Readily Verified. The Mixing Water May Be Added Directly To The Batch, In Which Case A Tank Is Not Required. Truck Mixers May Be Required To Be Provided With A Means Of Which The Mixing Time Can Be Readily Verified By The Engineer. The Maximum Size Of Batch In Truck Mixers Shall Not Exceed The Minimum Rated Capacity Of The Mixer As Stated By The Manufacturer And Stamped In Metal On The Mixer. Truck Mixing, Shall, Unless Other-wise Directed Be Continued For Not Less Than 100 Revolutions After All Ingredients, Including Water, Are In The Drum. The Mixing Speed Shall Not Be Less Than 4 Rpm, Nor More Than 6 Rpm. Mixing Shall Begin Within 30 Minutes After The Cement Has Been Added Either To The Water Or Aggregate, But When Cement Is Charged Into A Mixer Drum Containing Water Or Surface Wet Aggregate And When The Temperature Is Above 32oc, This Limit Shall Be Reduced To 15 Minutes. The Limitation In Time Between The Introduction Of The Cement To The Aggregate And The Beginning Of The Mixing May Be Waived When, In The Judgement Of The Engineer, The Aggregate Is Sufficiently Free From Moisture, So That There Will Be No Harmful Effects On The Cement. When A Truck Mixer Is Used For Transportation, The Mixing Time Specified In Subsection 405.4.4 (3) At A Stationary Mixer May Be Reduced To 30 Seconds And The Mixing Completed In A Truck Mixer. The Mixing Time In The Truck Mixer Shall Be As Specified For Truck Mixing. Transporting Mixed Concrete Mixed Concrete May Only Be Transported To The Delivery Point In Truck Agitators Or Truck Mixers Operating At The Speed Designated By The Manufacturers Of The Equipment As Agitating Speed, Or In Non-agitating Hauling Equipment, Provided The Consistency And Workability Of The Mixed Concrete Upon Discharge At The Delivery Point Is Suitable Point For Adequate Placement And Consolidation In Place. Truck Agitators Shall Be Loaded Not To Exceed The Manufacturer’s Guaranteed Capacity. They Shall Maintain The Mixed Concrete In A Thoroughly Mixed And Uniform Mass During Hauling. No Additional Mixing Water Shall Be Incorporated Into The Concrete During Hauling Or After Arrival At The Delivery Point. The Rate Of Discharge Of Mixed Concrete From Truck Mixers Or Agitators Shall Be Controlled By The Speed Of Rotation Of The Drum In The Discharge Direction With The Discharge Gate Fully Open. When A Truck Mixer Or Agitator Is Used For Transporting Concrete To The Delivery Point, Discharge Shall Be Completed Within One Hour, Or Before 250 Revolutions Of The Drum Or Blades, Whichever Comes First, After The Introduction Of The Cement To The Aggregates. Under Conditions Contributing To Quick Stiffening Of The Concrete Or When The Temperature Of The Concrete Is 30oc, Or Above, A Time Less Than One Hour Will Be Required. Delivery Of Mixed Concrete The Contractor Shall Have Sufficient Plant Capacity And Transportation Apparatus To Insure Continuous Delivery At The Rate Required. The Rate Of Delivery Of Concrete During Concreting Operations Shall Be Such As To Provide For The Proper Handling, Placing And Finishing Of The Concrete. The Rate Shall Be Such That The Interval Between Batches Shall Not Exceed 20 Minutes. The Methods Of Delivering And Handling The Concrete Shall Be Such As Will Facilitate Placing Of The Minimum Handling. Method Of Measurement The Quantity Of Structural Concrete To Be Paid For Will Be The Final Quantity Placed And Accepted In The Completed Structure. No Deduction Will Be Made For The Volume Occupied By Pipe Less Than 100mm (4 Inches) In Diameter Or By Reinforcing Steel, Anchors, Conduits, Weep Holes Or Expansion Joint Materials. Basis Of Payment The Accepted Quantities, Measured As Prescribed In Section 405.5, Shall Be Paid For At The Contract Unit Price For Each Of The Pay Item Listed Below That Is Included In The Bill Of Quantities. Payment Shall Constitute Full Compensation For Furnishing, Placing And Finishing Concrete Including All Labor, Equipment, Tools And Incidentals Necessary To Complete The Work Prescribed In The Item. Payment Will Be Made Under: Pay Item Number Description Unit Of Measurement 405 (1) 405 (2) 405 (3) 405 (4) 405 (5) Structural Concrete, Class A Structural Concrete, Class B Structural Concrete, Class C Structural Concrete, Class P Seal Concrete Cubic Meter Cubic Meter Cubic Meter Cubic Meter Cubic Meter V. Concrete, Masonry And Plastering Works A. General: All Concrete Works To Be Done Herein Shall Be In Accordance With Aci Requirement And/ Or Standard Specifications As Adopted By The Government. B. Cement Shall Be Portland Cement (type1) With 40 Kgs/bag. C. Fine Aggregates Shall Be Clean Hold River Sand, Free From Injurious Amount Of Clay, Loam And Vegetable Matter. D. Coarse Aggregates Shall Be River Run Gravel Or Broken Stones. The Maximum Size Shall Be 1/5 Of The Nearest Dimensions Between Side Forms Of The Concrete Members Or ¾ The Maximum Clear Spacing Between Reinforcing Bars. E. Reinforcing Bars: Reinforcing Bars Shall Be Intermediate Grade And Deformed And Shall Have Minimum Yield Strength Of 275 Mpa (40,000 Psi) F. The Wires Shall Be Locally Produced G.i. Wire Gauge No. 16. G. Placing Reinforcement Provide Bars, Wire Fabrics, Wire Ties, Supports And Other Devices Necessary To Install And Secure Reinforcement. Reinforcement Shall Not Contain Rust, Scale Oil, Grease Clay And Foreign Substances That Would Reduce The Bond. Rusting Of Reinforcement Is A Basis Of Rejection If The Effective Cross-sectional Area Of The Normal Weight Per Foot Of The Reinforcement Has Been Reduced To Less Than Specified In Paragraph Entitled “reinforcing Bars”. Remove Loose Rust Prior To Placing Of Steel. Splices Shall Be Approved Prior To Use. Do Not Splice At Points Of Maximum Stress. Overlapped Welded Wire Fabric The Spacing Of The Cross Wires, Plus 50 Mm (2 Inches). H. Concrete Hollow Blocks: 1. For Walls And Partitions, Use Chb Or Its Equivalent. 2. Minimum Comprehensive Strength Shall Be 700 Psi. I. All Concrete Cured For Least Seven (7) Days To Twenty-eight (28) Days If Possible After Placement To Attain The Required Strength Of Concrete. J. Removal Of Forms: Forms Shall Be Removed In Such A Manner As Not To Impair The Safety And Serviceability Of The Structures. K. Proportions Of All Materials Entering Into Concrete Shall Be Of Class “a”. L. Mixture For Concrete Slab: Thickness Of Slab Shall Be 200mm Thick. A Mixture Of Washed Sand, Screened Gravel And Portland Cement. M. Mixture For Plastering: Thickness Of Plaster Shall Be 16mm Thick. A Mixture Of Washed Sand And Portland Cement. Vi. Wall Installation Use 0.5mm Thk G.i. Rib-type Longspan Prepainted For Wall Cladding And 2” X 4” X 1.5mm X 6m C-purlins For Wall Cladding Framing. Section Vii. Drawings Annex A – Architectural Design Annex B- Project Billboard Plan Section Viii. Bill Of Quantities Bid No. Agr- 24-219-b Item Description Quantity Unit Unit Cost Total Cost No. I. Clearing, Grubbing, And Staking 733.50 Sq.m. Pesos And Ctvs. (p ) / Sq.m. P Ii. Excavation Works 391.77 Cu.m. Pesos And Ctvs. (p ) / Cu.m. P Iii. Backfill 275.16 Cu.m. Pesos And Ctvs. (p ) / Cu.m P Iv-a. Concreting (concrete Works) 185.02 Cu.m. Pesos And Ctvs. (p ) /cu.m. P Iv-b. Gravel Bedding (concrete Works) 16.28 Cu.m Pesos And Ctvs. (p ) /cu.m P Item Description Quantity Unit Unit Cost Total Cost No. Iv-c. Steel Works (concrete Works) 11,500.00 Kgs. Pesos And Ctvs. (p ) / Kgs. P Iv-d Formworks (concrete Works) 1,356.36 Sq.m. Pesos And Ctvs. (p ) / Sq.m. P V. Masonry Works 1,271.40 Sq.m. Pesos And Ctvs. (p ) / Sq.m P Vi. Plastering Works 2,886.00 Sq..m Pesos And Ctvs. (p ) / Cu.m P Total Bid Cost In Figures P Total Bid Cost In Words Summary Of Costs Item No. Bid Amount Clearing, Grubbing, And Staking ₱ _____________________________ Excavation Works ₱ _____________________________ Backfill ₱ _____________________________ Iv-a. Concreting (concrete Works) ₱ _____________________________ Iv-b. Gravel Bedding (concrete Works) ₱ _____________________________ Iv-c. Steel Works (concrete Works) ₱ _____________________________ Iv-d. Formworks (concrete Works) ₱ _____________________________ V. Masonry Works ₱ _____________________________ Vi. Plastering Works ₱ _____________________________ Total Bid Amount ₱ _____________________________ Section Ix. Checklist Of Technical And Financial Documents Technical Component Envelope Class “a” Documents Legal Documents ⬜ Valid Philgeps Registration Certificate (platinum Membership) (all Pages) In Accordance With Section 8.5.2 Of The Irr; 1. Registration Certificate From Sec, Department Of Trade And Industry (dti) For Sole Proprietorship Or Cda For Cooperatives, Or Any Proof Of Such Registration. 2. Mayor’s Permit Issued By The City Or Municipality – Where The Principal Place Of Business Of The Prospective Bidder Is Located; 3. Tax Clearance Per Executive Order 398, Series Of 2005,a S Finally Reviewed And Approved By The Bir 4. Audited Financial Statements, Showing, Among Others, The Prospective Total And Current Assets And Liabilities, Stamped “received” By The Bir Or Its Duly Accredited And Authorized Institutions For The Preceding Calendar Year Which Should Not Be Earlier Than Two(2) Years From The Date Of Bid Submission; For The Type And Cost Of The Contract To Be Bid Technical Documents ⬜ Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided Under The Rules; And ⬜ Special Pcab License In Case Of Joint Ventures; And Registration For The Type And Cost Of The Contract To Be Bid; And ⬜ Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission; Or Original Copy Of Notarized Bid Securing Declaration; And Project Requirements, Which Shall Include The Following: ⬜ Organizational Chart For The Contract To Be Bid; ⬜ List Of Contractor’s Key Personnel (e.g., Project Manager, Project Engineers, Materials Engineers, And Foremen), To Be Assigned To The Contract To Be Bid, With Their Complete Qualification And Experience Data; ⬜ List Of Contractor’s Major Equipment Units, Which Are Owned, Leased, And/or Under Purchase Agreements, Supported By Proof Of Ownership Or Certification Of Availability Of Equipment From The Equipment Lessor/vendor For The Duration Of The Project, As The Case May Be; And ⬜ Original Duly Signed Omnibus Sworn Statement (oss); And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc). Class “b” Documents ⬜ If Applicable, Duly Signed Joint Venture Agreement (jva) In Accordance With Ra No. 4566 And Its Irr In Case The Joint Venture Is Already In Existence; Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Financial Component Envelope ⬜ Original Of Duly Signed And Accomplished Financial Bid Form; And Other Documentary Requirements Under Ra No. 9184 ⬜ Original Of Duly Signed Bid Prices In The Bill Of Quantities; And ⬜ Duly Accomplished Detailed Estimates Form, Including A Summary Sheet Indicating The Unit Prices Of Construction Materials, Labor Rates, And Equipment Rentals Used In Coming Up With The Bid; And ⬜ Cash Flow By Quarter. Bid Form For The Procurement Of Infrastructure Projects [shall Be Submitted With The Bid] Bid Form Date : Project Identification No. : To: [name And Address Of Procuring Entity] Having Examined The Philippine Bidding Documents (pbds) Including The Supplemental Or Bid Bulletin Numbers [insert Numbers], The Receipt Of Which Is Hereby Duly Acknowledged, We, The Undersigned, Declare That: We Have No Reservation To The Pbds, Including The Supplemental Or Bid Bulletins, For The Procurement Project: [insert Name Of Contract]; We Offer To Execute The Works For This Contract In Accordance With The Pbds; The Total Price Of Our Bid In Words And Figures, Excluding Any Discounts Offered Below Is: [insert Information]; The Discounts Offered And The Methodology For Their Application Are: [insert Information]; The Total Bid Price Includes The Cost Of All Taxes, Such As, But Not Limited To: [specify The Applicable Taxes, E.g. (i) Value Added Tax (vat), (ii) Income Tax, (iii) Local Taxes, And (iv) Other Fiscal Levies And Duties], Which Are Itemized Herein And Reflected In The Detailed Estimates, Our Bid Shall Be Valid Within The Period Stated In The Pbds, And It Shall Remain Binding Upon Us At Any Time Before The Expiration Of That Period; If Our Bid Is Accepted, We Commit To Obtain A Performance Security In The Amount Of [insert Percentage Amount] Percent Of The Contract Price For The Due Performance Of The Contract, Or A Performance Securing Declaration In Lieu Of The The Allowable Forms Of Performance Security, Subject To The Terms And Conditions Of Issued Gppb Guidelines12 For This Purpose; We Are Not Participating, As Bidders, In More Than One Bid In This Bidding Process, Other Than Alternative Offers In Accordance With The Bidding Documents; We Understand That This Bid, Together With Your Written Acceptance Thereof Included In Your Notification Of Award, Shall Constitute A Binding Contract Between Us, Until A Formal Contract Is Prepared And Executed; And We Understand That You Are Not Bound To Accept The Lowest Calculated Bid Or Any Other Bid That You May Receive. We Likewise Certify/confirm That The Undersigned, Is The Duly Authorized Representative Of The Bidder, And Granted Full Power And Authority To Do, Execute 12 Currently Based On Gppb Resolution No. 09-2020 And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For The [name Of Project] Of The [name Of The Procuring Entity]. We Acknowledge That Failure To Sign Each And Every Page Of This Bid Form, Including The Bill Of Quantities, Shall Be A Ground For The Rejection Of Our Bid. Name: Legal Capacity: Signature: Duly Authorized To Sign The Bid For And Behalf Of: Date: Bid Securing Declaration Form [shall Be Submitted With The Bid If Bidder Opts To Provide This Form Of Bid Security] Republic Of The Philippines) City Of ) S.s. Bid Securing Declaration Project Identification No.: [insert Number] To: [insert Name And Address Of The Procuring Entity] I/we, The Undersigned, Declare That: I/we Understand That, According To Your Conditions, Bids Must Be Supported By A Bid Security, Which May Be In The Form Of A Bid Securing Declaration. I/we Accept That: (a) I/we Will Be Automatically Disqualified From Bidding For Any Procurement Contract With Any Procuring Entity For A Period Of Two (2) Years Upon Receipt Of Your Blacklisting Order; And, (b) I/we Will Pay The Applicable Fine Provided Under Section 6 Of The Guidelines On The Use Of Bid Securing Declaration, Within Fifteen (15) Days From Receipt Of The Written Demand By The Procuring Entity For The Commission Of Acts Resulting To The Enforcement Of The Bid Securing Declaration Under Sections 23.1(b), 34.2, 40.1 And 69.1, Except 69.1(f),of The Irr Of Ra No. 9184; Without Prejudice To Other Legal Action The Government May Undertake. I/we Understand That This Bid Securing Declaration Shall Cease To Be Valid On The Following Circumstances: Upon Expiration Of The Bid Validity Period, Or Any Extension Thereof Pursuant To Your Request; I Am/we Are Declared Ineligible Or Post-disqualified Upon Receipt Of Your Notice To Such Effect, And (i) I/we Failed To Timely File A Request For Reconsideration Or (ii) I/we Filed A Waiver To Avail Of Said Right; And I Am/we Are Declared The Bidder With The Lowest Calculated Responsive Bid, And I/we Have Furnished The Performance Security And Signed The Contract. In Witness Whereof, I/we Have Hereunto Set My/our Hand/s This Day Of [month] [year] At [place Of Execution]. [insert Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Affiant [jurat] [format Shall Be Based On The Latest Rules On Notarial Practice] Omnibus Sworn Statement (revised) [shall Be Submitted With The Bid] Republic Of The Philippines ) City/municipality Of ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: [select One, Delete The Other:] [if A Sole Proprietorship:] I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; [select One, Delete The Other:] [if A Sole Proprietorship:] As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached Duly Notarized Special Power Of Attorney; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; [select One, Delete The Rest:] [if A Sole Proprietorship:] The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Partnership Or Cooperative:] None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Corporation Or Joint Venture:] None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [name Of Bidder] Complies With Existing Labor Laws And Standards; And [name Of Bidder] Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: Carefully Examining All Of The Bidding Documents; Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This Day Of , 20 At , Philippines. [insert Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Affiant [jurat] [format Shall Be Based On The Latest Rules On Notarial Practice]