Northern Railway Tender
... More
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Northern Railway - NR Tender
Ireps
Opening Date20 Feb 2025
Closing Date17 Mar 2025
Tender Amount₹ 9,64,95,791.8
Technical
Technical
Financial
Class Of Bidder
... View More
Class-I local supplier.
Bid Capacity
... View More
The bid capacity required in the given tender to bid can be calculated using the following formulas and values: 1. For a single work: - 30% of the advertised value of the tender (three similar works) - 40% of the advertised value of the tender (two similar works) - 60% of the advertised value of the tender (one similar work) Given the tender value is Rs. 50.00 Cr, the calculations are: - 30% of 50 Cr = 15 Cr (three similar works) - 40% of 50 Cr = 20 Cr (two similar works) - 60% of 50 Cr = 30 Cr (one similar work) 2. For composite works, the calculation depends on the value of each component. For the given components: - A: Rs. 23 Cr, - B: Rs. 15 Cr, - C: Rs. 5 Cr, - D: Rs. 4 Cr, - E: Rs. 3 Cr The bid capacity for each component can be calculated as: - For component A (Rs. 23 Cr): - 30% of 23 Cr = 6.9 Cr (three similar works) - 40% of 23 Cr = 9.2 Cr (two similar works) - 60% of 23 Cr = 13.8 Cr (one similar work) - Similar calculations can be done for other components based on their values. Additionally, the available bid capacity can be calculated using the formula:
Available Bid capacity = [AxNx2] - 0.33xNxB Where:
A = Maximum value of construction works executed and payment received in any one of the previous three financial years or the current financial year
N = Number of years prescribed for completion of work for which bids have been invited
B = Existing commitments and balance amount of ongoing works The bid capacity required is also related to the Average Annual Contractual Turnover, which is calculated as:
Average Annual Contractual Turnover = Total contractual payments in the previous three financial years / 3 And the tenderer must have a minimum average annual contractual turnover of V/N, where:
V = Advertised value of the tender in crores of Rupees
N = Number of years prescribed for completion of work for which bids have been invited.
Technical Capacity
... View More
The required prior work experience for the bidder includes completing similar works with specific values and percentages. The bidder should have completed:
- For component A, 30/40/60% of Rs. 23Cr in 3/2/1 number of works of similar nature completed in 7 years.
- For component B, 30/40/60% of Rs. 15 Cr in 3/2/1 number of works of similar nature completed in 7 years.
- For component C, a single work of similar nature worth 35% of Rs. 5Cr in the last 5 years.
- For component D, a single work of similar nature worth 35% of Rs. 4Cr in the last 5 years.
The bidder must also have successfully completed or substantially completed any of the following during the last 7 years:
- Three similar works each costing not less than 30% of the advertised value of the tender.
- Two similar works each costing not less than 40% of the advertised value of the tender.
- One similar work costing not less than 60% of the advertised value of the tender.
Additionally, the bidder must have a minimum average annual contractual turnover of V/N or 'V' whichever is less, where V is the advertised value of the tender in crores of Rupees and N is the number of years prescribed for completion of work for which bids have been invited.
Mentioned values and percentages include:
- 30/40/60% of Rs. 23Cr
- 30/40/60% of Rs. 15 Cr
- 35% of Rs 5 Cr
- 35% of Rs 4 Cr
- Rs 23 Cr
- Rs 15 Cr
- Rs 5 Cr
- Rs 4 Cr
Costs
EMD
₹ 6,32,500Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
256Sig-SPL-TKJ-233-EI-DnF-PROJECT-SPL-TKJ-S AND T/NORTHERN RLYTender No
256Sig-SPL-TKJ-233-EI-DnFTender Authority
Northern Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Training for Rly. Tech./JE/SE/SSE by OEM in installation, testing & commissioning, maintenance & trouble shooting of EI system complete including supply of hard/soft copies of course 4 module for each trainee. Competency certificate to trainee to be issued by OEM. All arrangements including classroom, lab, equipment, measuring instruments etc. required for the training should be satisfactorily arranged by the contractor at their own cost. (Job= Training of one Tech./JE/SSE for one day)(Inspection:Site Incharge.)
30
782
23484.9
... More
Training for Rly. Officers by OEM in installation, testing & commissioning of EI system 5 complete including supply of hard/soft copies of course module for each trainee. All arrangements including classroom, lab, equipment, measuring instruments etc. required for the training should be satisfactorily arranged by the contractor at their own cost. (Job= Training of one officer for one day) (Inspection: Site Incharge.)
10
1005
10055
... More
Supply of "As built" Documents.(i) Technician / Jr. Engineer (Installation and Maintenance Level) - Manual for Installation, Testing, Commissioning and Maintenance of the System. 6 (6 Sets for each EI) (ii) Engineer Level - Technical & System Module for diagnostic & Trouble shooting for Repair centre. (6 Sets for each EI) (iii) Higher Management Level Functioning and System Overview. (6 Sets for each EI) (iv) Completion Documents as per condition of Contract. (6 Sets for each EI) (v) Supply of documents as per technical specification Para - 10.2 of RDSO Specification no RDSO/SPN/192/2019. (6 Sets for each EI). (Inspection: Site Incharge.)
2
90665
181330.2
... More
Supply of Instruments /Tool Kits suitable for EI commissioned:Tool kit & Measuring 7 Instruments for technicians / Jr. Engineers for Testing, Maintenance, Trouble Shooting and repair at site. Note: Details of tool kit item is enclosed in Annexure of tender document. (Inspection: Consignee)
2
218124
436248.84
... More
Prep. of Cable route plan, Track jumpering plan, Cable core chart, SWRD, Power supply arrangement based on station specific load calculation, Circuit termination chart, Cable termination chart in relay room, relay huts (If applicable) and location boxes, Location wiring plan, Cable insulation chart and register, Track circuit history card, Fuse analysis, Equipment disposition plan, Track circuit plan, Terminal and Contact analysis, Outdoor circuits, other outdoor diagram and 1 obtaining approval of the engineer as per list given below. This item includes cable route plans for cable to be laid at adjacent block sections/stations and necessary corrections for block working in outdoor diagrams of adjacent stations (if required) Existing diagrams will be provided by Railway. After alteration, altered tracings will be provided by contractor as per details (i) to (v) below. (i) Supply of 6 copies of completion set of superior quality paper, laminated, properly bound in steel clip jaw file with cushioned cover. (ii) Software back up of complete set in the form of DVDs (3 sets). (iii) One complete set of tracings. (iv) Design through CAD (v) Drawings in A3 & plans in bigger size. (In six sets as mentioned above) (Inspection: Site Incharge) 2
2
48591
97182.04
... More
Supply of Colour Light Signal Unit and post as Per RDSO Specifications. 3
-
-
1964878.12
... More
Casting, concreting and curing of foundation of Signals. 4
-
-
320150.27
... More
Fixing, Erection, Installation and wiring 2/3/4 aspect of CL Signals.
-
-
152217.95
... More
Casting, concreting, curing of foundations of size (400mmx300mm) at surface and 5 1000mm deep and erection of SLB/BSLB/SB/ calling on boards/stop dead boards/Auto territorial board as per drg. No. NR/S&T/CON/7.4/97 & provisions of SEM. Supply of SLB/BSLB/SB/calling on boards. as per approved drg.No. SA-No.2373 (with latest amendment) has to be done by the contractor. (Inspection: Site Incharge)
6
9714
58288.98
... More
Supply and fixing of RETROREFLECTIVE P/G/C/A markers with complete fittings as per drg. No. NR/S&T/Con/6.2/97. All material required for the job such as MS sheet, MS angle, nuts, bolts, paint and painting materials will be supplied by the Contractor. (Inspection: Consignee/ Site Incharge) 7
1
830
830.51
... More
Supply of Location Boxes and Junction Boxes. 8
-
-
3234416.88
... More
Casting, concreting and curing of foundation and erection of App. Cases.
-
-
1597485.6
... More
Preparation & fixing of Bakelite (Hylum Grade P2) sheet 910x800x6mm and teak wooden shelf 900x450x25mm duly fixed by angle iron piece of different size inside all the app. Cases. Hylum board shall be fixed on an angle iron frame of 25mmx25mmx3mm. Angle iron frame fixed in location boxes secured by nuts & bolts.Fixing of fuses, ARA terminal, shelf type Q series relays and other type relays on square bars and wiring, fixing and jamming of cables with 2-inch thick salwood plank provided at the bottom. This will include opening, pasting and jamming armour of each cable in 9 the hole drilled for each cable through the salwood plank & all cable entry points on location boxes, location huts, JB's relay room/battery room to be closed with suitable masonry works covered with sand and plastering. Description for terminal drawing of circuits, inside app. Case. Size of lettering will be 100mm or as per instructions of Engineer at site. Painting from outside as well inside with red oxide and aluminium paint is covered separately. All materials including hard wood shelf, hylum board, salwood plank, angle iron square bar, wire and wiring material as per the IRS spec., non deteriorating type HRC fuses, bases, nuts, bolts and other items shall be supplied by the contractor. Relays and ARA terminals only shall be supplied by the railways. (Inspection: Site Incharge )(All the activities/supply by contractor described above applies to all the Sub items mentioned below)
-
-
622212.35
... More
"Preparation and fixing of Bakelite (Hylum Grade P2) sheet 450x800x6mm and teak wooden shelf 450x450x25mm duly fixed by angle iron piece of different size inside all the app. Cases. Hylum board shall be fixed on an angle iron frame of 25mm/25mm/3mm. Angle iron frame will be fixed in location box secured by nuts & bolts. Fixing of fuse ARA terminal, shelf type Q series relays and other type of relays on square bars and wiring, fixing and jamming of cable with 2-inch thick salwood plank provided at the bottom. This will include opening, twisting and jamming armor of each 10 cable in the hole drilled for each cable through the salwood plank and of cable entry points on location boxes, location nuts JB's relays room battery/room to be closed with suitable masonry work covered with sand & plastering. Wiring description for terminal, drawing of circuits inside app. Case. Size of lettering will be 100mm or as per instructions of Engineer at site. Painting from outside as well inside with RED oxide and aluminum paint is covered separately. All material including teak wood shelf, hylum board, salwood plank, angle iron square bar, wire and wiring material as per the IRS spec. Non deteriorating type HRC fuses and bases, nuts, bolts and other items shall be supply by the contractor. Relays and ARA terminals only shall be supplied by the railways. (Inspection: Site Incharge)(All the activities/supply by contractor described above applies to all the Sub items mentioned below)"
-
-
109945.74
... More
Shifting and alteration of Loc Boxes. Excavation of pit in and around the existing location boxes very carefully without damaging the working cables and shifting and turning the location boxes to clear of the infringement as instructed by the Railway representative at site. The 11 work includes ensuring the safety of the signalling system, releasing the cable coils to give access for shifting/ turning the location boxes. Necessary masonry work and earth work in and around the location boxes to the required level shall be done as instructed by the Railway representative at site. if the existing earth connection to the location boxes are disturbed the earth wires shall be the properly re-connected. (All materials required for the work shall shall be supplied by the contractor). (Inspection: Site Incharge) 12
-
-
47384.98
... More
General Concrete Work. 13
-
-
108279.75
... More
Supply of materials for DC Track Ckt. 14
-
-
1611840.75
... More
Installation of DC Track Circuits. 15
-
-
1298974.44
... More
Supply and installation of Electric Point machine and its accessories.
-
-
8437641.69
... More
Supply and installation of power supply system and Relay Room materials. 17
-
-
3917359.94
... More
Trenching for laying of Signaling/Telecom/Power Cables along/across the railway track.
-
-
7570686.8
... More
Laying of signalling/Telecom/power cables of different sizes as per drg. No. (NR/S&T/CON/1.1/97) and as per cable route plan approved by Railways. Meggering of cable before and after its laying of all type of outdoor cables. (Inspection: Site Incharge)
170000
9
1579300
... More
Testing & meggering of all types of outdoor cables after its laying and termination on 19 both ends under supervision of Railway representative. This also includes preparation of test report for core to core and core to earth on prescribed proforma for each core of the cable separately after termination of cable. This also includes dressing & lacing of cable on both ends. Performa for testing & material for lacing to be supplied by the contractor. (Inspection: Site Incharge) 20
9000
14
133110
... More
Supply of HDPE DUCT (40mm outer dia) ,HDD boring and laying of HDD duct.
-
-
428621.81
... More
Blowing/ Drawing of OFC cable in the HDPE duct by mechanical system.(Inspection: Site Incharge)
5
11145
55729.85
... More
Trenchless boring (by using HDD or manual pushing method) for PLB HDPE pipe 22 (40/33mm dia.) / GI pipe at built up area, platforms, culverts, track crossing and road Crossing as per approved Cable route plan. Depth of trenchless boring shall not be less than 1500mm from bottom of Rail Flange/Road Level. (Inspection: Site Incharge)
1
697950
697950.49
... More
Conventional earth: - Supply and installation of earth electrodes as per std. practice. The item includes digging of pit in earth, 3 Mtrs. deep and fixing earth electrode pipe. Casting of cement concrete enclosures as per drg. No. (NR/S&T/CON/6.4/97). The soil treatment shall be done as per std. practice. The item includes provn. of mild steel flat of size 35mm x 6mm (as per IRSEM) and 23 nut bolted connection of MS flat with earth electrode. The other end of mild steel flat to be connected to block instrument, cable sheath of power equipment, signal base, apparatus case, CT rack / relay racks, other equipments as per the instruction of Engr. at site & IRSEM. Earthing connection location to location shall be done through cable which shall be provided by Railway. Complete materials such as earth electrodes as per drg. No. (NR/S&T/CON/6. 3/97), cement, wiring material, nut bolt for connection & mild steel flat of size 35mm x 6mm or 210 sqm as per SEM etc. to be supplied by the contractor. (Inspection: RITES and Site Work by SIte Incharge.)
120
3567
428104.8
... More
Supply, Installtion & Commissioning of basic earthing kit as per . Specification no. RDSO/SPN/197/2008 and Drg No. SDO/./E&B/001 dated:- 19.09.2008 and Drg No. RDSO/SDO/./E&B/002 dated:- 19.09.2008. Earthing kit consisting of earthing electrode of 17mm dia as 3m long -01 no 2 MEEB (300mmx25mmx6mm) -o1 no. 3. SEEB (150mmx25mmx6mm) -01 no 4. Earth enhancing compound - 30 kg (minimum). This includes:- Provisiion of earth connection from MEEB to S&T equipment i.e. cable sheath, apparatus case, BPAC, Axle counter, IPS, Data Logger etc. with PVC 24 earth wire of size 25/35 sq.mm through copper lugs of suitable size PVC earth wire shall be supplied by Railways. Note: At certain locations, it may not be possible to achieve earth resistance of less than 1.0 ohm with one earth electrode /pit due to soil resistivity. In such cases, provision of loop earth consisting of more than one earth pit shall be done, for interconnection of two earth pits copper tape of size 25x2 sq.mm shall be provided by the contractor. The number of pits required shall be decided based on the resistance achieved for the earth pits already installed. The procedure mentioned above for one earth pit shall be repeated for other earth pits. The other earth so installed for the purpose of loop earthing arrangement shall be counted as separate earth. (Inspection: RDSO and Site Work by Site Incharge.) 25
4
26916
107667.12
... More
Miscellaneous Items. 26
-
-
551760.54
... More
Preparation of two SWR (Inspection: Site Incharge/SWR Incharge) 27
-
-
36979.2
... More
Telecom and Control Equipment Supply and Installations. 28
-
-
336413.6
... More
Fire Alarm System. 29
-
-
2737977.32
... More
Painting, Dismantling, etc.
-
-
298503.24
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%