Get tender documents at just ₹200 per tenderKnow More
Search made simple for latest tendersNo hidden charges. No keyword restrictionsExplore Our Plansor Pay Per Tender

TECHNICAL SPECIFICATION FOR MIST ELIMINATOR CONFIDENTIAL CUSTOMER : NATIONAL THERMAL POWER CORPORATION NTPC PROJECT : NTPC MAUDA 2x500 MW APPLICATION : FLUE GAS DESULPHURIZATION SYSTEM BHARAT HEAVY ELECTRICALS LIMITED (A GOVT OF INDIA UNDERTAKING) Flue Gas Desulphurization Group Ranipet TECHNICAL SPECIFICATION OF MIST ELIMINATOR - NTPC MAUDA 2X500 Elfa nSint MAUDA:FGD:MISTEL:ROO TECHNICAL SPECIFICATION FOR MIST ELIMINATORS Department Prepared Checked Approved FGD Ntr 774-4,-,,----1t 01 Shanmuga Siindar ' 51197/2 5111 , KI Yuvaraj R J.K. DM-FGD DM-FGD AGM-FGD 00,10sel \ P Naveen Reddy Mgr-FGD Revision - 00 Dated 04/02/2019 COMMENTS : This document is meant for the exclusive purpose of bidding against this specification and shall not be transferred, reproduced or otherwise used for purposes other than that for which it is specifically issued. CONTENTS Page 2 of 37 TECHNICAL SPECIFICATION OF MIST ELIMINATOR — NTPC MAUDA 2X500 Fri nifrs MAUDA:FGD:MISTEL:ROO MAIN SUPPY 1 PROJECT INFORMATION 2 APPLICABLE CODES & REGULATIONS 3 INTENT OF SPECIFICATION 4 PROVENNESS CRITERIA 5 TECHNICAL IN FORMATION 6 SCOPE OF SUPPLY 7 GENERAL REQUIREMENTS 8 PACKING & FORWARDING 9 SUPERVISON OF ERECTION, TESTING & COMMISSIONING 10 EXCLUSION 11 INSPECTION AND TESTING 12 SPARES, TOOLS & TACKLES 13 PERFORMANCE GUARANTEE 14 WARRANTY 15 TRAINING 16 CONFLICT 17 DOCUMENTATION 18 ANNEXURES Page 3 of 37 TECHNICAL SPECIFICATION OF MIST ELIMINATOR — NTPC MAUDA 2X500 E asi ESig MAUDA:FGD:MISTEL:ROO 1.0 PROJECT INFORMATION: Mauda Thermal Power Project (Coal Based) to be set up by NTPC near Mauda in Nagpur district of Maharashtra State, India. The capacity of the project is 1000 MW comprising of two (2) units of 500 MW each a. Owner NTPC b. Buyer BHEL, Ranipet c. Process/Application Flue Gas Desulphurization A) SITE CONDITIONS Guarantee point 1. Ambient Temperature and Relative Humidity Ambient Temperature 27 deg C Relative Humidity 60 % Design point 2. Ambient Temperature and Relative Humidity Ambient Temperature (Design) 45 deg C Relative Humidity 60 % Note: 1) Guarantee point site conditions shall apply for the Guarantee Values as well as for the Guarantee test/Performance test Equipment and Material must be suitable for the range of ambient site conditions B) PROJECT LOCATION AND APPROACH The power project is proposed to be located in Mauda Tehsil, Nagpur district of Maharashtra. Mauda town is located at a distance of approx. 4 kms from the plant. Page 4 of 37 TECHNICAL SPECIFICATION OF MIST ELIMINATOR — NTPC MAUDA 2X500 MAUDA:FGD:MISTEL:R00 2.0 APPLICABLE CODES & REGULATIONS The design of Mist Eliminators shall conform to the latest edition of Indian/International codes accepted by the Buyer according to good engineering practice. List of codes/standards recommended: (The list is not exhaustive) S.No Description Material Design & others 1 Piping IS, AISI, ASTM, ASME, DIN, EN, BS or Equivalent IS, AFNOR, ANSI, API, ASME, ASTM, AWWA, BS, DIN, EN, EJMA, Manufacturer's standard 2 Machinery IS, AISI, ASTM, ASME, DIN, EN, BS or Equivalent IS, AFNOR, AFBMA, AG MA, ANSI,API, ASTM, AWS,BS, DIN, IEC, HI, HEI, ISO, NEC, NEMA, EN, TEMA, VDI, Manufacturer's standard 3 Instrumentation IS, AISI, ASTM, ASME, DIN, EN, BS or Equivalent IS, AFNOR, ANSI, API, ASME, BS, DIN, EN, IEC, IEEE, ISA, ISO, NC, Manufacturer's standard 4 Electrical AISI, ASTM, ASME, DIN, EN, BS or Equivalent IS, BS, VDE, IEC, EN, ANSI,IEEE, NEMA 5 Civil IS, AISI, ASTM, ASME, DIN, EN, BS or Equivalent IS, AFNOR, ASCE, ASNT, BS, DIN, EN, ANSI, ACI, AISC, AWS, SSPC, Manufacturer's Standard 6 Structural Steel SA/I52062 BS/EN 1993 (Eurocode-3) or Equivalent international codes. 7 Performance Test ASME PTC 40, JIS, EPA, Manufacturer's standard. The design and materials shall conform to the requirements of applicable codes and regulatio

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.