Zilla Parishad Tender

Supply of PVC rigid pipes(Medium duty) confoerming to ASTM-D 1785 , threaded to match with GI pipes as per IS: 1239 (Pt-1) [schedule-80] (i)80mm dia.

Supply of PVC rigid pipes(Medium duty) confoerming to ASTM-D 1785 , threaded to match with GI pipes as per IS: 1239 (Pt-1) [schedule-80] (ii) 40mm dia(including Drop Pipe)

Supplying of High Density Polythene strainer of Oriplast to make with adapter conforming to IS specification. a) Supllying fitting fixing i) Reducing Socket.

Supplying of High Density Polythene strainer of Oriplast to make with adapter conforming to IS specification. a) Supllying fitting fixing ii)Steel Cutter.

Supplying of High Density Polythene strainer of Oriplast to make with adapter conforming to IS specification. a) Supllying fitting fixing iii) 40 mm dia Plug

Supplying of High Density Polythene strainer of Oriplast to make with adapter conforming to IS specification. a) Supllying fitting fixing iv) Solvent Cement

Earth work in excavation in foundation trenches, in all sorts of soil(including mixed soil but excluding laterite or sandstone ) including removing, spreading or stacking the spoils within a lead of 75.m as directed. The item includes necessary trimming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500mm.

E/W fitting with excavated earth obtained from foundation.

Single Brick Flat Soling of Picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. a) Col

Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes . (i) Pakur Variety , As per rate analysis Base ,Trape. sec.col,Slab ,Tie Beam

Hire and labour charges for shuttering with centering and necessary staging uptp 4m using approved stout props and thick hard wood planks of approved thickness wiyh required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) a)25mm to 30mm shuttering without staging in foundation. Base ,Trape. sec.col,Slab ,Tie Beam

Reinforcement for reinforced work in all sorts of structure @1.211% of item no 11

Plaster (to wall, floor,celling etc) with sand and cement morter including rounding off or chamfering corners as directed amd ranking out joints including throating , nosing and drip course , scaffolding / stagging where necessary (Ground floor). [Excluding cost of chipping over concrete surface] (ii) With 1.4 cement morter

Supplying 15mm thick M.S. Sheet fitted and fixed on one or both faces of M.S W.I. gate etc. with point weilding at not more than 150 mm apart complete in all respect as per design including cost of all labour and materials.(a) Inside,b) Outside,c ) Outside plaster of column (6 nos )

Neat cement punning about 1.5mm thick in wall , dado , window sill, floor etc. i) Inside NOTE : Cement 0.152 cum per 100sqm

Supplying , fitting and fixing pillar cock of approved make. B) PTMT Pillar Cock - 15 mm . (Prayag or equivalent).

Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600mm x 600mm x 10mm thick) in floor , skirting etc set in 20mm sand cement mortar (1:4) and 2mm thick cement slurry back side of tiles using cement @2.91 kg./m2 or using polymerised adhesive (6mm thick layer applied directly over finished artificial stone floor/mosaic etc. without any backing course) laid after application slurry using 1.75 kg. of cement per m2 below mortar only,joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturers specification and direction of Engineer-in-Charge. (white cement, synthetic adhesive and grout material to be supplied by the contractor)For 25 mm……

Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600mm x 600mm x 10mm thick) in floor , skirting etc set in 20mm sand cement mortar (1:4) and 2mm thick cement slurry back side of tiles using cement @2.91 kg./m2 or using polymerised adhesive (6mm thick layer applied directly over finished artificial stone floor/mosaic etc. without any backing course) laid after application slurry using 1.75 kg. of cement per m2 below mortar only,joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturers specification and direction of Engineer-in-Charge. (white cement, synthetic adhesive and grout material to be supplied by the contractor)For 15 mm……

Painting of two coats all over the water tank

Plumbing charge (sub-mershal pump, motor, tap, 1 " pipe)

Supplying & installation of name Plate with marbel tabloid. And photo 3 nos (before work,during work and after work)

ADD for G.S.T (Goods and Service taxes) @ 18.00 % (50% WB GST. & 50% CENTRAL GST.) over the above total [ Marked as- A. ] asper the rules of The Govt. of India…

ADD for LABOUR WELL FARE CESS @ 1.00 % over sl 1 to 34