West Bengal State Marketing Board Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
West Bengal State Marketing Board - WBSMB Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date19 Jun 2024
Closing Date18 Jul 2024
Tender Amount₹ 2,42,30,219
Costs
EMD
₹ 4,84,604Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_WBSMB_695192_1Bid Award Id
ViewTender No
WBSAMB / CEO / 8 / 2024 - 25Tender Authority
West Bengal State Marketing Board ViewPurchaser Address
-Website
http://wbtenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
(A) Filling in foundation or plinth by fine sand/ fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
394.77
236708
599.61
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
69.82
1675
24
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
1292.06
444468
344
Cement concrete with graded stone ballast (40 mm size) excluding shuttering ground floor and foundation with Proportion(6:3:1) (B) With N.B. Variety stone metal.
117.78
568288
4825
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) Other than SAIL/TATA/RINL
(i) For works in foundation, basement and upto roof of ground floor/upto 4 m
55.91
3040610
54385
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work (upto roof of ground floor)
2601.61
928775
357
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety a) For Foundation and Plinth
385.4
2370768
6151.45
Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation and plinth
112.86
575021
5095
b) Superstructure
114.25
607467
5317
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in . Ground Floor.
239.07
166873
698
Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as
necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour.
In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement).
Using grey cement. iii) 35 mm. thick
1160.24
372436
321
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide of required to match colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.
-
-
-
Floor
33.79
23317
690
Wall
134.7
93747
696
Supplying, fitting and fixing steel rolling shutter profile type with 18 B.G. of approvd type, steel latche section 75 mm. wide, fitted with coilwas spring to necessitate the fitting of required no. of C.I.pulleys on heavy type solid drawn seamless steel tube complete with locking arrangements both inside and outside specially built up side guide channels including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete.
46.08
150681
3270
Collapsible gate with 40 mm X 40 mm X 6 mm Tee as top and bottom guide rail, 20 mm X 10 mm X 2mm vertical channels 100 mm apart in fully stretched position. 20 mm X 5 mm MS flats as collapsible bracings properly rivetted and washered including 38 mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete.
14.4
62352
4330
(b) Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive &waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per manufacturer's specification for water proofing layer in water tank etc. (No Departmental Cement is required)
258.41
66411
257
M.S. or W.I. Ornamental grill of approved design joints continuously welded with M.S., W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. i) Grill weighing above 10 kg/sq.m and upto 16 kg/sq.m
0.84
8256
9888
Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending gooddamagestomatchwith existingsurface completein allrespect excluding glazing. (b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the and horizotal glazing bars]
5.22
11478
2199
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. i) ii) 4mm thick coloured / tinted / smoke glass.
4.65
2173
468
Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria..
5.4
2683
497
Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria.
2.52
6962
2763
Supplying, fitting & fixing factory made foam PVC (density shall not be less than 600 kg/cum) door frame (finished weight of 2.73 kg/mtr.) of size 100mm X 45mm made off with 5mm thick extruded foam PVC sheet, mitre cut at junction of horizontal and vertical member and joined them by heat welding. Entire door
frame profiles to be reinforced with steel primer coated 19 SWG 40mm X 20mm M.S. tube. An additional 5mm thick PVC sheet with desired colour/shade to be
provided at the exposed surface and three nos 5mm thick PVC sheet to be provided as gap insert. The door frame to be fixed with wall by using 8mm dia.
and 100mm long strainless steel screws and PVC fasteners. A minimum of 4 nos. screws to be provided for each vertical member & 2 nos. for horizontal member all complete as per direction of Engineer-in-Charge.
29.7
15325
516
Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of 59mm x 30mm section with 2.0mm (+/- 0.2mm) wall thickness, horizontal & vertical section shall be fixed to each other by self tapping screws and one solid polymeric / M.S. galvanised tubular L-shaped brackets 100mm x 200mm in each corner of the shutter frame for placing hinges, polymer based multicavity holoow section of 120 mm x 30 mm with 2.0mm (+/- 0.2mm) wall thickness will be fitted in the middle as lock rail, reinforced by solid polymer bar of 200mm long at both ends & screws for both sides. The section frame will then be fitted in by PVC panels of size 100mm x 25mm, with wall thickness 1.2mm (+/- 0.2mm) and 2 nos. of 6mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear.
9.45
20100
2127
Wood work in door and window frame fitted and fixed in position complete icluding a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Butt Hinges and M.S clamps.
0.08
5544
72954
Anodised aluminium barrel/ tower/ socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws.
6
288
48
(ix) 300mm long x 10mm dia. bolt.
2
198
99
Anodised aluminium Aldrop/Sliding bolts of approved quality manufactgured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete.
2
462
231
Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws. 100x63x3.2mm
24
1728
72
Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete. 100 mm gripx12mm dia
14
1190
85
(iv) Two point nose steel handle including fitting and fixing.
20
1000
50
(vi) steel peg stay 300 mm long including fitting and fixing.
20
700
35
(i) Supplying Brass floor door stopper including fitting and fixing complete.
2
234
117
Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, inclkuding fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor.
4.2
9907
2359
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI
mark. (vi) 100mm. X 50mm. X 1.25mm.
6
258
43
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement oncrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (b) 40mm X 6mm, 200mm Length
12
300
25
40mm X 6mm, 250mm Length
12
348
29
i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. (b) 250mm long.
2
318
159
Supplying fitting approved type ventilator in position after cutting holes in walls setting in cement mortar mending damages to wall and plaster and two coats of paint of approved brand of any shade. Payment of mending good damages of wall & plaster and painting to be made separately.
32
3456
108
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (2) With 1:4 Cement morter (a) 15 mm thick plaster ( External) (i) Ground Floor
2260.93
334617
148
20 mm th.Plaster with 1:6 Cement morter i) Ground Floor
767.48
116656
152
(a) 10 mm th.Plaster (Ceilings) (3) with 1:4 Cement morter
250.36
30293
121
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per 100 sq.m.
495.57
16353
33
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) (a) Two Coat i) Water based interior grade Acrylic Primer
714.64
31587
44.2
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the
EIC.
-
-
-
In Ground Floor: (a) Two Coat
2513.46
113357
45.1
Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats
790.58
55340
70
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.
-
-
-
a) Normal Acrylic Emulsion
2437.97
163343
67
(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
710.32
20599
29
Priming one coat on timber, plastered surface with synthetic oil bound primer of approved quality including smooth ening surfaces by sand papering etc.
4.2
159
38
(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface :With super gloss (hi-gloss) -
122.26
9658
79
(iv) Two coats (with any shade except white)
4.2
340
81
Supplying,Fitting & Fixing UPVC pipes A- Type and fittings confirming to IS : 13592 - 1992 with all necessary clamps nails,including making holes in wall, Floor etc. cutting trenches in any soil through masonry concrete structures etc. if necessary and mending good damags including joining with jointing materials (Spun Yarn,Valamoid/Bitumen/M-Seal etc.)Complete.
260.4
65360
251
( C ) Bend 87.5 degree
-
-
-
(ii) 110 mm dia
50
8000
160
(d) Shoe
-
-
-
(ii) 110 mm dia
50
5550
111
M.S. structural works with hollow sections ( square or rectangular shape) conforming to IS: 806-1957 & IS:1161-1958) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1956 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 1957, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof.
-
-
-
i) For trusses spanning up to 12.00 m
14.13
1021897
72316
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (iv) Two coats
588.06
46456
79
Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield
strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made
on area of finished work).
-
-
-
(i) In Roof:-
-
-
-
a) With 0.5 mm thick sheet
680.4
609638
896
Supplying, Fitting Corrugated Zinc Alluminium alloy coloured sheet ridging fitted with necessary bolts, Screws, washers etc complete. (225 mm end lapping) (A) 300 mm lapping each way (a) with 0.60 mm sheet.
-
-
-
For ridging
105
54600
520
Zinc Aluminium alloy Colour coated steel sheet vally gutter with perimeter not less than 750 mm with 225mm lap each way fitted & fixed with necessary bolts, nuts,screws, Etc complete. Vallygutter made of 0.63mm. Thick sheets (300mm in lapping)
210
130410
621
Holding down bolt with nut including 100 x 100 x 6 mm plate washer at bottom fitted complete and packing the hole with cement concrete or cement grout as directed.
-
-
-
(ii) 20 mm dia bolt.
-
-
-
(c) 600 mm long
112
31248
279
Supplying, fitting and fixing shower rose of approved brand and make.
-
-
-
(h) Polythene overhead shower of approved make,
-
-
-
(vi) 32 mm Dia,
2
308
154
Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).
4
5032
1258
(vii) 25 mm dia
3
2736
912
(viii) 20 mm dia
2
1314
657
Supplying, fitting and fixing bib cock or stop cock.
-
-
-
(b) (ii) Chromium plated Concealed Stop Cock (Equivalent to code no-514(A) & Model- Tropical / Sumthing Special of ESSCO or similar brand).
-
-
-
Toilet block.
2
1348
674
(c) (i) Chromium plated Bib Cock (angular shape with wall flange)
(Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar
brand).
15
12915
861
Supplying, fitting and fixing C.I. holder bat clamp including cutting holes in wall etc. and mending good all damages in cement concrete with jhama chips (4:2:1) and cement plaster (6:1) to match and curing complete in all respect.
-
-
-
(iii) 25mm
30
930
31
(iv) 32mm
15
690
46
(ii) 20 mm
15
435
29
Supplying fitting and fixing PVC pipes of approved make of (medium duty) conforming to ASTMD - 1785 & Threaded to match with GI pipes as per IS : 1239 (Part - I). With all nacessary accessories, specials viz socket, bend, tee, union, cross, elbo, nipple, longscrew, R/socket, R/tee, short piece etc. fitted with holder bats clamp, including cutting pipes, making threads, fitting fixing etc. complete in all respect including cost of all necessary fittings as required jointing materials and two coats of paiting with approved paint in any position above ground. (Payment will be made on centre line measurement of the total pipeline including all specials.No separate payment will be made for accesories, specials. Payment for painting will be made seperately).
-
-
-
25 mm dia
35
6195
177
32 mm dia
10
2360
236
b) For concealed work
-
-
-
15 mm dia
10
1370
137
20 mm dia
40
6320
158
Supplying fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 & Threaded to match with GI pipes as per IS : 1239 (Part - I). With all nacessary accessories, specials viz socket, bend, tee, union, cross, elbo, nipple, longscrew, R/socket, R/tee, short piece etc. fitted with holder bats clamp, including cutting pipes, making threads, fitting fixing etc. complete in all respect including cost of all necessary fittings as required jointing materials and two coats of paiting with approved paint in any position above ground. (Payment will be made on centre line measurement of the total pipeline including all specials.No separate payment will be made for accesories, specials).
-
-
-
40 mm dia
35
10885
311
Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.
4
4060
1015
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer .
-
-
-
(c) 1500 litre capacity
2
15680
7840
Labour for hoisting plastic water storage tank.
-
-
-
(i) Upto 1000 litre capacity.
-
-
-
(a) Upto 1st story from G.L.
2
192
96
Supplying,fitting and fixing vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.
4
8832
2208
Supplying,fitting and fixing approved brand P.V.C.CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. 600 mm long
8
856
107
750 mm long
8
936
117
Supplying,fitting and fixing approved brand 32 mm dia P.V.C.waste pipe, with PVC coupling at one end fitted with necessary clamps.
8
472
59
Supplying, fitting and fixing pillar cock of approved make.
-
-
-
(a) (i) C.P Piller cock- 15 mm (Equivalent to Code No-507 & Model - TROPICAL / SUMTHING SPECIAL of ESSCO or similar brand).
20
11100
555
Supply of UPVC pipes (B Type) & fittings conforming to IS - 13592 - 1992.
-
-
-
(i) Single Socketed - 3.00 m length
-
-
-
b) 110 mm dia
49
14308
292
b) 110 mm dia
14.4
4219
293
Fittings.
-
-
-
i) Coupler
-
-
-
b) 110 mm dia
8
680
85
v) Plain Y
-
-
-
b) 110 mm dia
8
1648
206
ix) Bend 45°
-
-
-
b) 110 mm dia
4
356
89
x) Bend 87.5°
-
-
-
b) 110 mm dia
8
960
120
xi) Door bend (T.S )
-
-
-
b) 110 mm dia
14
2058
147
xxi) 110 mm x 110 mm P. Trap
-
-
-
75 mm
8
2248
281
Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps(any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipe line including specials).
-
-
-
(A) Above Ground
-
-
-
ii) 110 mm dia
32.4
1846
57
(B) Under Ground
-
-
-
ii) 110 mm dia
21
1764
84
Shallow water closet Indian pattern(I.P.W.C.) of approved make in white vitreous chinaware supplied ,fitted and fixed in position (excluding cost of concrete for fixing).
-
-
-
(i) 580 mm long
2
1946
973
Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts,nuts etc.
-
-
-
(a) With 'P' trap
4
5684
1421
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.
-
-
-
(ii) 470 mm x 280 mm x 340 mm
4
3780
945
Supplying,fitting and fixing 32 mm dia. Flush pipe of approved make with necessary fixing materials and clamps complete.
-
-
-
i) Polythene Flush Pipe
4
620
155
Supplying, fitting and fixing liquid soap container.
-
-
-
(c) Fibre glass
6
1128
188
Supplying, fitting and fixing soap holder.
-
-
-
(b) Fibre glass
6
348
58
Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm.
4
2452
613
Supplying, fitting and fixing towel rail with two brackets. (b) Aluminium (iii) 25 mm dia. and 750 mm long
8
1496
187
Supplying, fitting and fixing glass shelf with aluminium guard rails. (a) Ordinary type with 5.5 mm sheet glass (ii) 600 mm X 125 mm
4
1920
480
Supplying, fitting and fixing 18 mm thick marble partition slab with chawk doongri marbel square cut, both sides polished with two front corners rounded and edges polished.
1.8
2566
1426
Constructing Inspection pit of inside measurement 600 x 600 mm x upto 600 mm. (depth) with 250 mm. thick 1st class brick work in cement mortar (4:1) on all sides, bottom of the pit consisting of 100 mm. thick cement concrete (6:3:1) with Stone chips over a layer of jhama brick flat soling 15 mm. thick (4:1) cement plaster to inside walls and outside walls upto G.L. and 20 mm. thick (4:1) plaster to bottom of the pit, providing necessary invert with cement concrete (6:3:1) with Stone chips as per direction, neat cement finishing to entire internal surfaces, top of hte pit covered with 100 mm. thick R.C.C. Slab (3:1.5:1) with stone chips and necessary reinforcements upto 1% and shuttering including 10 mm. thick cement plaster (4:1) in all external surfaces of the slab and one 560 mm. dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earth work in excavation in all sorts of soil , filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.
5
35120
7024
Construction of Septic tank of different capacities as per approved drawing awith 1st class brick work in cement mortar (4:1) including two 560 mm. dia. R.C.C. manhole cover of approved make supplied , fitted and fixed in the 100 mm thick R.C.C. (1:1.5:3) top slab with necessary fittings, 20 mm. thick cement plaster (4:1) with neat cement finish tot he internal surfaces and 15 mm. thick cement plaster (4:1) to outside wall upto 200 mm. below G.L. floor finished with 25 mm. thick grey artificial stone 100 mm thick R.C.C. (1:1.5:3) bottem slab including supplying, fitting and fixing all necessary specials, fittings, S.W. tees, C.I. foot rest etc. including excavating earth in all sorts of soil, shoring, bailing and pumping out water as necessary, ramming,dressing the bed and refilling the sides of the tank with earth,removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes,joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 5% by weight of cement with all costs of labour and materials.
-
-
-
(iii) For 30 users A) With Pakur variety. (Other than SAIL/TATA/RINL) i) With pakur variety.
1
61145
61145
Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (4:1) band all round and cement brick work (4:1) upto 0.90 metre from top with 20 mm thick cement plastering (4:1) to inside face upto the depth of cement brick work, 15 mm thick cement plaster (4:1) on outer face from top of the well upto G.L. and 10 mm thick cement plaster (4:1) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement concrete (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials.
-
-
-
(a) With 250 mm thick dry brick work and 250 mm thick cement brick work (6:1) and 1.00 m.inside dia.
-
-
-
(Other than SAIL/TATA/RINL)
1
16159
16159
Supplying,fitting and fixing in position R.C.C. Manhole/pit cover of approved make with rim of approved make (Heavy type).
-
-
-
(ii) 560 mm dia.
7
2366
338
B. Compacting original ground supporting embankment Loosening, Leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Clause 305.3.4 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
294
7085
24.1
Earth work in cutting to from road section in correct profile including removal of soils not exceeding initial lead of 50 mtr and initial lift of 1.5 mtr in Ordinary soil.
686
61671
89.9
Supplying, spreading and consolidating Moorum to
a depth of 75 mm at desired density and C.B.R. as
per specification with power roller to proper gradient
and camber including watering as necessary, and
lighting, guarding, barricading and making
adequate earthen bundh where necessary to
protect the edges and curing with water for 2 to 3
days, mending cracks by rolling where necessary
including all incidental charges of roller, cost of fuel
& lubricants etc. complete as per specification.
294
197862
673
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate watering including lighting, guarding, barricading and making necessary earthen bundh of one metre width on each side and preparing the bed by necessary cutting or filling, including cost of all materials and hire and labour charges of all men and machinery and
compacting to the required density.
(i) Grading-II Aggregate (53mm to 22.4 mm) Using Stone Screening Type B
Using manual means:
196
746391
3808.12
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
1988.41
47721
24
Cement concrete with graded stone ballast (40 mm size) excluding shuttering ground floor and foundation with Proportion(6:3:1) (B) With N.B. Variety stone metal.
196
945700
4825
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety a) For Foundation and Plinth
294
1808526
6151.45
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) Other than SAIL/TATA/RINL
(i) For works in foundation, basement and upto roof of ground floor/upto 4 m
11.54
627602
54385
Hire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ply wood/steel sheet plate with required bracing for any kind of plain or reinforced concrete works in all sorts of minor structure including culvert, box culvert, crossdrain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per specification and direction. (b) Where staging is not required.
288.2
61674
214
Bituminous filler of approved type in expansion joints of dummy joints including finishing the top surface as directed.
0.39
18128
46603
Labour for boring through any type of soil for sinking Tube - Well of required dia with top enlargement by rig boaring system (either by reserve circulation or by direct rotary method) including hire charges and labour for rig machine, tools and plants stagging, force pumping set and making arrangements for water required for boring etc. complete and lowring of pipes, strainer, blind pipes etc. complete.
-
-
-
For depth up to 250 M. for 100 mm. dia tube well with top enlargement of 200 mm. dia. (up to 50 M.)
-
-
-
for first 50 Mtr.
50
50700
1014
for next 50 Mtr.
50
44150
883
for next 50 Mtr.
50
52750
1055
for rest 100 Mtr.
100
109100
1091
Supplying, fitting and fixing PVC pipes for underground work of approved make (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metrebelow surfacein all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.)
-
-
-
a) 200 mm internal dia
50
135800
2716
b) 100 mm. internal dia
175
203350
1162
Supply of High Density Poly-ethylene Pipe conforming to IS-4984-1985(dia) 6Kg./Sq.Cm.(working pressure)
-
-
-
75mm. dia
40
9920
248
Supplying, fibre glass reinforced Epoxy resin slotted of 1 mm slot width in 6.1m length of approved make and as per direction of the Engineer - in - Charge (100 mm dia)
-
-
-
b) 150 mm. nominal dia
-
-
-
i) 6mm wall thickness
24
39312
1638
Supplying, Fitting & Fixing Steel cutter Piece upto 450mm long with sockets.
-
-
-
(iii) 75 mm dia
1
403
403
Supplying, fitting and fixing heavy type bell mouth reducing socket. (iv) 100 mm X 200 mm
1
865
865
Washing and developing Tube - Well with air compressor pump and engine for 8 ( eight) hours continious pumping per ay with necessary arrangement for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required complete in all respect.
-
-
-
for Tube - Well of 100 mm. dia. With top enlargement 200mm. Dia. To have yield of 6000 gallons per hour.
-
-
-
For 3 (Three day's)
3
22614
7538
Packing the annular space between the out side of the Tube Well pipe and strainers and the bore ith pea size washed gravel of approved quality having size from 2 mm. to 5 mm. or the size approved by the Engineer - in charge including cost of all materials labour and equipment complete.
40
81160
2029
Supplying, fitting and fixing G.I. cap at top
-
-
-
(iii) 200 mm
1
563
563
Providing 200 mm centre guide.
-
-
-
i) With Clamp
3
384
128
Packing annular space between the outside of the housing pipe and the bore with puddled clay balls of approved size as per direction of the Engineer-in-charge with cost of all materials and labour complete.
5
2085
417
Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction.
1
1231
1231
Geophysical Investigation of the aquifer by electro logging system with tools & plants as necessary including supply of necessary report
1
8247
8247
Labour for making arrangement for showing verticality test including the cost for hire charges of tools and plants, scafolding, labour etc. all complete.
1
916
916
Electrical Work
-
-
-
Supplying and fixing 415V 63 Amp Sheet steel Main Switches on angle iron frame on wall (Make: Havells or equivalent)
1
3675
3675.04
Supplying & fixing 4 bars 415 V, 100 A Busbar chambers (4 x50x5mm) sheet metal (16 SWG) Iron Clad. Dimension of Sheet Metal Box 500x150mm Al. bars on angle iron frame on wall, incl.earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991)
1
2556
2556.46
Supplying, fitting & fixing (1mtrX1mtr) 12 mm thick boiling water resistant ply with MS bracket made from flat, angles to be fixed with MS nuts & bolts etc.
1
2686
2686.85
Supplying and fixing of 240V 16Amp DP with fuse on L&N Sheet steel Main Switches on flat iron frame on wall (Make: Havells or equivalent)
8
4746
593.28
Supply of 4 core 25 sqmm Al armoured Cable.
20
6680
334
Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting for main switch to Bus-bar.
20
1236
61.8
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables of 4 core 10 sqmm.
2
271
135.96
Finishing the end of 4 core 10 sqmm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials
2
138
69.01
Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the sizes of 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC after cutting Channel of size (43 mm x 43 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 25 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles. (Main switch to DBs of individual shops)
250
47380
189.52
Supplying and fixing of (2+4) Way double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment with Supplying and fixing 240 V 40 A MCB Isolator on din rail of existing DBs and necessary connection.and Supplying and fixing 4 nos 240 V (6-16) A MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.
8
16372
2046.61
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchormake) fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish. Average run 9 mtr.
32
34970
1092.83
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V+C18 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish.On Board
17
1330
78.28
Supplying & Fixing MS fan clam of two piece type for RC ceiling as per Approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting.
8
1994
249.26
Supply & Fixing Socket type fan regulator (Step type) (Brand Approved by EIC) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl. making necy. connections etc.
8
1944
243.08
Supply of 20 watt ECO Compact industrial batten suitable for single T8 LED tube.Model No.DIJB12LT8-20.Make- Crompton or equivalent reputed brand.
18
5940
330
Supply of 20 watt ULTRON
LED polycarbonate T8 tube with in built driver and metal heat sink. Efficacy of 100 Lumens/W.Model No.LT8-20-865-(2).Make- Crompton or equivalent reputed brand.
18
10404
578
Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on
ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.
18
3689
204.97
Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling
8
313
39.14
Supply of 10 watt LED ADORE 2 star Lamp. Model No-LHLDEUEEML8R010. Make- Havells or equivalent reputed brand.
8
984
123
Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC after cutting Channel of size (43 mm x 43 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 25 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles. (From SPNDB to Power Plug)
120
17798
148.32
Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required
8
6196
774.56
Excavation of soil for installation of Earth Electrode and filling & ramming forsoft Soil.
4
885
221.45
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below By TATA-Medium GI pipe
2
3139
1569.72
Extra treatment of soil by using salt and charcoal for pipe electrode
2
1093
546.93
Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe
2
1884
942.45
S&F earth busbar of Galv .M.S plat 50mm *6mm on wall having clearance of 6mm from wall incl. providing drilled holes on the busbar complete with G.I bolts , nuts ,washers spacing insulator etc. as required
0.5
111
222.48
Connecting the equipments to early busbar incl. S&F No. 8 SWG G.I. wire on wall /floor with stapels as per G.S.
10
92
9.27
Toilet Block
-
-
-
Supplying and fixing of 240V 16Amp DP with fuse on L&N Sheet steel Main Switches on flat iron frame on wall (Make: Havells or equivalent)
1
593
593.28
Supply of one No. 2 core 10 sqmm XLPE/Alluminium armoured cable.
50
8150
163
Laying of one No. 2 core 10 cable in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed .
28
4672
166.86
Laying of cable 2 core 10 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting.
10
587
58.71
Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for single, 2, 3, 3½ & 4 core
12
531
44.29
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below For 2 core 10
2
236
118.45
Finishing the end of 2 core 10 cable XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials
2
70
35.02
Supplying and Drawing of 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC. 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe 19 mm dia 3 mm thick polythene pipe without earth continuity wire dia , by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works.[From main switch to SPN DB and SPN DB to starter].
40
6509
162.74
Supplying and fixing (2+6) way double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.With Supplying and fixing 240/415 V 40A DP MCB Isolator on din rail of existing DBs and necessary connection and necessary connection and Supplying and fixing6 nos 240 V (6-32) A SPMCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.(Make- Havells or equivalnt reputed brand).
1
2357
2357.67
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand Approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish: 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC.Average run 8 mtr
12
11952
996.01
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand Approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish: 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC on Board
2
156
78.28
Supply of 20 watt ECO Compact industrial batten suitable for single T8 LED tube.Model No.DIJB12LT8-20.Make- Crompton or equivalent reputed brand.
2
660
330
Supply of 20 watt ULTRON
LED polycarbonate T8 tube with in built driver and metal heat sink. Efficacy of 100 Lumens/W.Model No.LT8-20-865-(2).Make- Crompton or equivalent reputed brand.
2
1156
578
Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling.
6
234
39.14
Supply of 10 watt LED ADORE 2 star Lamp. Model No-LHLDEUEEML8R010Make- Havells or equivalent reputed brand.
6
738
123
Supply of 240V 300 mm(1400 RPM) heavy duty exhaust fan. Color-Grey) (Make: Orient or equivalent reputed brand. )
4
13812
3453
Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of 300mm/12inch Dia.
4
1355
338.87
Supply & Fixing of 30 cm Exhaust fan (12") louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long).
4
453
113.3
Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required(c) 40 mm dia
18
4560
253.38
Supply, Installation, Testing & commissioning of 2 H.P. submersible motor pump set including flat cable for office building purpose having capacity of 20 L / min - 100 L / min dischage (Lump Sum). Reputed Brand approved by EIC.[Model No - CORA 1C/50G+UMAI100-1.5/22 1.5 SQMM](Make: KSB or equivalent)
1
51385
51385
Supplying of max. motor Output for 2 HP, 1.5 KW DOL Starter.Make- Havells or equivalent reputed brand.
1
2170
2170
Fixing only starter (for motor control ) on angle iron frame on wall ,Direct on line Satrter for motor up to 5 HP.
1
221
221.45
Excavation of soil for installation of Earth Electrode and filling & ramming forsoft Soil.
2
442
221.45
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below By TATA-Medium GI pipe
1
1569
1569.72
Extra treatment of soil by using salt and charcoal for pipe electrode
1
546
546.93
Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.
1
942
942.45
S&F earth busbar of Galv .M.S plat 50mm *6mm on wall having clearance of 6mm from wall incl. providing drilled holes on the busbar complete with G.I bolts , nuts ,washers spacing insulator etc. as required
0.5
111
222.48
Connecting the equipments to early busbar incl. S&F No. 8 SWG G.I. wire on wall /floor with stapels as per G.S.
10
92
9.27
Solar high Mast (9 mtr)
-
-
-
Supply& Fixing of 9M high mini mast suitable for wind speed 50m/s made up of IS 5986/IS 2062/IS 1239 or Eqiv from Hot dip galvanized iron -IS 4759 with head fram suitable for fixing 4 nos solar plate and luminaries carrige suitable to install 4 nos. luminaries in symmetrical arrangement with ss rope and trun buckle softy arrangement.The shaft ill be bottom diameter-320mm top diameter 120mm thikness 4mm, base plate 520mmx520mm and 16 mm thickness . The mini mast should have inbuilt Junction box for termination of cable, battery box structure for accomodating rotorised 4 nos solar battery and ladder arrangement for maintenance of solar plates, luminaries etc, L type foundation bolt M24x800mm (4 Nos) is to be supplied with the mast as required ( Make: Kolkata Pole Corporation/Transrail/Utkasrh/BPC)
1
42032
42032
construction of suitable shallow reinforced foundation as per standerd design as per the manufacturer with 1:1½:3 cement concrete M-20 Gr, for the High Mast considering the safe soil bearing capacity at site as 10T/ Sq mtr. TMT steel as per IS(0.5% of CC Volume) and about said depth along with suitable dimension that confirms safe bear of high mast with height of 300 mm above ground incl all materials and labour complete in all respect as per direction of E.I.C. the civil foundation work incl. for erection of upto 9 mtr high mast tower by earth work in excavation of foundation trench approx. Total foundation is 800x800x1500mm with 800x800x900mm below GL zone including earth work in excavation , single brick flat soiling, shuttering with centering reinforcement for reinforced concrete work in all sorts of structures,ordinary cement concredte (Mix1:1½:3) with gradded stone chipes( 20 mm size) and making 15mm thick pplaster complete as per modern engineering practice.
1
17484
17484
Supply & installation Solar Mini mast Lighting system ( fixed type) with 4 nos 33w DC LED flood light having initial luminaire lumen output of minimum 4500LM (As per LM79 report of NABL Approved lab) and IP65 protection ( As per test report). With lithum ferro phosphate battery operating at 25.6 v with solar charge controller having the bluetooth based system health scanner and programmer for the monitoring of 12.76kwh capacity of 200wp or higher battery & sollar pannel performance parameters via Android App based mobile application on mobile phone and tablet to monitor the health condition & performance . All the components like PV MODULE, Battery, Luminaries & charge controller will be supplied by the companey and 2 yeard comprehensive warranty againest any manufacturing defects . Make : Philips/ Wipro/ Havells
1
237796
237796
Erection, testing & commissioning of 9 mtr length mini mast solar panel LED flood light along with 3x1.5 sqmm copper with Co's own tools, trackles, crane including labour charges & carrying as per direction of EIC
1
6500
6500
Excavation of soil for installation of earth electrode and filling & ramming for Morrum soil.
2
430
215
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04Mts long with ISI Medium GI Pipe as per GS
1
1369
1369
Connecting the equipments to earth busbar including S&F solid GI (Hot Dip) wire of sixe as bellow as per GS . 7/14 SWG stranded GI wire.
5
80
16
Extra for providing masonary encloser on the top of the earth electrode of overall size 86.36cmx 86.36cm x 46cm deep (below ground level) complete with cemented brick work (1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement GI reducer including drilling of 46nos 12 mm dia holes on the Gi pipe.
1
915
915
Solar Street Light
-
-
-
Supply of 40 watt Crompton Solar All in One : comprising of high efficacy LEDs (120 lm/w), efficient Monocrystalline Solar panel, new age Lithium Ferro phosphate battery, silicon encapsulated high efficiency MPPT Charge controller, uniquely designed Aluminum housing for better heat dissipation & strategically placed perforations allowing natural air passive cirulation within & into the housing for improved thermal management of internal components, including mounting bracket, in-built PIR Motion sensor. Cat no- CSADSMP40CDL-NC. Make-Crompton or equivalent.
16
1320000
82500
Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama
metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling upthe excavated earth pit with shifted soil and ramming properly
16
46720
2920.05
Excavation of soil for installation of Earth Electrode and filling & ramming forsoft Soil.
32
7086
221.45
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below By TATA-Medium GI pipe
16
25115
1569.72
Extra treatment of soil by using salt and charcoal for pipe electrode
16
8750
546.93
Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe
16
15079
942.45
S&F earth busbar of Galv .M.S plat 50mm *6mm on wall having clearance of 6mm from wall incl. providing drilled holes on the busbar complete with G.I bolts , nuts ,washers spacing insulator etc. as required
8
1779
222.48
Connecting the equipments to early busbar incl. S&F No. 8 SWG G.I. wire on wall /floor with stapels as per G.S.
160
1483
9.27
Add 18 % G S T
1
3659539
3659539.74
Add 1% labour welfare cess
1
239903
239903.16
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements