Public Works Department Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
Public Works Department - PWD Tender
Civil And Construction
Eprocure
Opening Date30 Oct 2024
Closing Soon26 Nov 2024
Tender Amount₹ 25,35,97,782
Costs
EMD
₹ 50,71,956Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_WBPWD_766496_1Tender No
WBPWD/PW(R)/SEPD/PIU-I/NIT-05 OF 2024-2025Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://wbpwd.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring.
2887.41
19238
555480
Depth of excavation for additional depth beyond 3000 mm. upto 4000mm. excluding cost of shoring as necessary.
866.22
23470
203302
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) upto 150 mm thick With earth obtained from excavation of foundation
2213.68
7754
171649
Filling in foundation or plinth by Fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
3649.87
75394
2751783
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
1924.94
24
46199
Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor
With N.B. Variety stone metal
1:3:6 proportion
144.37
3575
516137
Post Constructional Measures :
Anti-termite treatment to the outside of foundations with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1%concentration) with water by weight including cutting shallow channel by excavating soil along and close to the wall face ensuring uniform dispersal of the chemical emulsion to a depth of 300mm. from the ground level by rodding with 12mm. dia. M.S. rod at 150mm.interval in the channel. 1.75 litres of chemical emulsion per metre length shall be used and a balance quantity of 0.5 litres of the chemical emulsion per running metre shall then be used to treat the back fill earth by directing the spray of the imulsion towards the wall surface. The entire work is to be carried out as per specification laid down in para 4.3.1.1 of code IS-6313 (Part-III) 1981.
212
65
13780
Anti-termite treatment to the soil under floor with chemical emulsion by admixing chloropyrofos emulsifiable concentrate (1% concentration) with water by weight including drilling vertically 12mm. dia holes at the junction of floor and wall at 300mm. interval to reach the soil below using hand operated pressure pump to squirt chemical emulsion into the pump to squirt chemical emulsion into the holes at the rate of one litre per hole. The holes shall be sealed after operation to match with the existing floor. The entire work is to be carried out as per specification laid down in para 4.3.1.4 of code I.S.-6313 (Part-III)- 1981.
1478.1
73
107901
Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth.
Without rolling but including ramming.
2013.49
134
270492
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mmnominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes River Bazree
Ground floor
201.35
3821
769461
Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture]
Ground floor
M 25 Grade
Pakur Variety
2756.69
6379
17586717
1st floor
597.29
6474
3867244
2nd floor
401.58
6569
2638240
3rd floor
26.28
6664
175147
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.
Pakur Variety
Ground floor
89.19
5884
524795
1st floor
79.56
5979
475690
2nd floor
39.08
6074
237372
3rd floor
14.86
6169
91671
Reinforcement for reinforced concrete work in all sorts of structuresincluding distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction
For works in foundation and upto roof of ground floor/upto 4m
Tor steel/Mild Steel
SAIL/ TATA/RINL
433.96
60969
26458294
1st floor
87.43
61399
5368152
2nd floor
57.85
61829
3576833
3rd floor
6.32
62259
393480
Hire and labour charges for shuttering with centering and necessary stagingupto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)
25 mm to 30 mm shuttering without staging in Foundation
3358.46
205
688484
Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work
Ground floor
5059.42
363
1836569
1st floor
4827.23
381
1839175
2nd floor
2859.75
399
1141040
3rd floor
266.77
417
111243
Brick work with 1st class bricks in cement mortar (1:4)
211.66
5102
1079974
In Superstructure, Ground floor
217.17
5325
1156517
1st floor
217.67
5436
1183341
2nd floor
130.66
5547
724823
3rd floor
52.9
5658
299329
25mm. thick damp proof course with cement concrete withstone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface).
182.91
190
34755
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) In Ground floor
1754.25
666
1168874
1st floor
1422.3
678
964760
2nd floor
563.29
690
388845
Labour for Chipping of concrete surface before taking up Plastering work.
Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work
12165.76
21
255481
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed andraking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] Ground floor
With 1:6 cement mortar
20 mm thick plaster
1263.72
157
199011
1st floor
1103.88
161
178255
2nd floor
450.43
165
74537
3rd floor
240.34
169
40733
With 1:4 cement mortar
20 mm thick plaster
Ground Floor
3915.97
152
598713
1st floor
3913.52
156
613992
2nd floor
1869.19
160
300734
3rd floor
128.52
164
21192
With 1:4 cement mortar
10 mm thick plaster
Ground Floor
1473.42
123
181923
1st floor
1425.3
127
181683
2nd floor
668.42
131
87877
Neat cement punning about 1.5mm thick in wall, dado, windowsill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m.
537.05
32
17572
Supplying and laying true to line and level Tactile Finish Scratch resistant,Neutral to UV rays, Non-fade, High Slip Resistant Full Body Vitrified Tilesconforming to IS:15622-2006 & IS :4457- 2007 and tested in accordance withIS:13630 [Non- modular sizes for tiles with Skid resistance: 0.6, Mohr'shardness 7.0, Staining resistance: Class-1, Water Absorption E 0.5%], MOR 38N/sq.mm & Breaking strength 4000 N for Outdoor area of building e. g.Driveway, Pathway, Pavements, Parking lots, Sloping ramps, Entrance lobbies,Patios, Portico, swimming pool enclosure, Bus Passenger Shed & directingvisually impaired persons, set over necessary underlay and 2 mm thick cementslurry at back side of tiles using cement @ 2.91 Kg./Sqm, joints grouted withadmixture of white cement and colouring pigment to match with colour of tilesand removal of wax coating of top surface of tiles with warm water and cleaningthe tiles using soft and dry cloth complete including the cost of materials, labourand all ot her incidental charges complete including backside slurry butexcluding the cost of underlay and true to the manufacturer's specification anddirection of Engineer-in-Charge.
In Ground Floor:
Sizes-300 mm x 300 mm x15 mm
591.5
1766
1044761
Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brand conforming to IS 15622:2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.)≤ 0.08 %] in floor, skirting etc. using polymerised adhesive of 6mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course and joints grouted with admixture of white epoxy grout materials of approved brand including spacer -2mm as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other incidental charges complete as per direction of Engineerin-Charge. (Note: This work should not be executed without specific permission of Superintending Engineer
ln Ground FIoor:(size not Iess than 600mmX 600 mm X 9.5mm thick)
1398.53
1566
2190098
1st floor
1159.19
1578
1829202
2nd floor
639.92
1590
1017473
Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance 0.5, Mohr's hardness 5.0, Staining resistance: Class-1, Water Absorption: E 0.5%], MOR 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor).
In Ground Floor: Sizes-600 mm x600mm x10 mm with breaking strength 1500 N
142.53
1581
225376
1st floor
154.17
1593
245631
2nd floor
61.46
1605
98659
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. Wall With Polymereised addesive & Epoxy grouting pointing including spacer- 2 mm ( When Tiles are laid over existing hard ready surface)
Area of each tile above 0.09 Sq.m [using adhesive 4.5 mm thick]
Coloured decorative
GROUND FLOOR
1922.71
1091
2098157
1st floor
1932.11
1096
2118076
2nd floor
830.87
1101
914996
Supplying, fitting, fixing marble slab/tiles of 15mm. to 18mm. thic kness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thick base of cement mortar (1:2) laid with white cement slurry @4.4 kg/sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineer-in-charge in Ground Floor. {White cement and Pigment to be supplied by the Agency} With Makrana plain pink / Adranga pink / Garbh Gulabi/Udaypur pink / Udaypur Green / Black Bhaslana.
Area of each Slab/tile exceeding 1.00 sq.m. (This item to be executed on specific permission of Superintending Engineer).
Ground floor
42.81
2130
91226
1st floor
85.63
2142
183502
Supplying,fitting & fixing granite slab 15mm to 18mm thick in floor, lobby, stair, landing and treads etc. over 20mm (avg) thick base of cement morter (1:2) laid with white cement slurry @ 4.40Kg per Square meter before placing of granite and jointed with white cement slurry @ 2.0 Kg per square meter with necessary pigments and complete as per direction of Engineer-in-charge including cost of all materials, labours, curing and roughening of concrete surface complete.
In ground floor
Area of each Granite slab above 1.00 Square meter.
313.69
2997
940430
1st floor
195.04
3009
587063
2nd floor
189.42
3021
572420
3rd floor
109.49
3033
332188
Extra cost of labour for prefinished and premoulded Nosing to treads of steps, railing, window sill etc. of Marble Stone.
Ground flooor
677.85
258
174885
Extra cost of labour for Marble Stone Floor in treads of Steps.
223.97
226
50617
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).
Sal : Siliguri.
Ground floor
1.36
81936
111679
1st floor
2.02
82136
165833
2nd floor
0.78
82336
63810
Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria.
66mm x 90mm
Ground floor
138.45
497
68810
Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite doorshutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science an Technology (DST) to satisfy IS:4020 door testing performance criteria.
In ground floor
32mm thick
27.09
2763
74850
1st floor
37.17
2777
103221
2nd floor
14.81
2791
41335
Supplying solid flush type doors of deluxe decorative (both side) quality,conforming to I:S 2202 timber frame consisting of top and bottom rail and sidestyles of well seasoned timber 65mm wide each and the entire frame fitted with27.5mm wide battens places both ways in order to made the door of solid coreand internal lipping with teak, mahogony or rose wood approved decorativeveneers using phenol formaldehyde as glue etc. complete, including fitting, fixingthe shutters in position but excluding the cost of hinges and other fittings inground floor:
35mm thick shutters (single leaf) Ground floor
52.29
3955
206807
35mm thick shutters (Double leaf) Ground floor
18.9
3985
75317
1st floor
38.43
3969
152529
2nd floor
3.15
3999
12597
3rd floor
28.35
3983
112918
4th floor
6.3
4013
25282
Supplying, fitting & fixing fire resistant door frame conforming to IS:3614, tested and certified as per laboratory approved by Engineerin- charge, of section 143 x 57 mm having built in rebate made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for mounting 120 minutes fire rated door shutters. The frame is fitted with intumescent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with back plate bracket and anchor fastener of approved size and make. Rubber door silencers should be provided on striking jamb. Supplying, fitting & fixing fire resistant Door leaf of 46 mm thick fully flush double skin glazed fire resistant door shutters with or without vision lite, of 120 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 18 SWG G.I. sheet (zinc coating not less than 120 gm/ m2) duly filled heat-resistant phenolic resin bonded insulation material (honeycomb craft) and fixing with necessary stainless steel ball bearing hinges of approved make. For pair of doors astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided as per manufacturer recommendation with a beeding and screw from inside. The glass should be 6mm clear borosilicate fire rated glass of relevant rating.All door and frames shall be finished with polyurethene aliphatic grade paint of approved colour including applying a coat of approved brand fire resistant primer. The door leaf and frame shall have passed minimum 250 hours of salt spray test. Rate should include supply and installation complete as per direction of Engineerin- charge.
2 hour Fire rated door double leaf of size (1470 mm x 2170 mm)
ground floor
12.6
29957
377458
2 hour Fire rated door double leaf of size (1470 mm x 2170 mm)
1st floor
9.45
30256
285925
2 hour Fire rated door double leaf of size (1470 mm x 2170 mm)
2nd floor
6.3
30556
192504
Supplying, fitting & fixing Surface mounted Crash Bar/ panic Bar of touch padstyle, made of heavy duty cast iron/ steel body & latches with SS, BHMA certified& conforming to ANSI A 156.3 for grade-1 (3 hours fire rated) and suitable forsurface mounting to wooden/hollow metal/ Al framed door withopening upto900mm, with maximum operating force 6 kg for unlocking easily & outwardlyduring emergency, complete in all respect as per direction & satisfaction ofEngineer-in-Charge.(Note: To be installed at "FIRE EXIT" only under location specific instructionof Eingineer-in -Charge.)
for door opening 1200
9
8081
72729
Supplying, fitting & fixing Surface mounted overhead Door Closer for 2 hourfire rated doors, of size EN-4 for leaf width upto 950/ 1100mm weighingmaximum 60/ 80 kgs, CE certified, marked & conforming to EN 1154-2003 ofapproved quality of reputed brand, complete as per direction & satisfaction ofEngineer-in-Charge
for leaf width upto 1100mm
9
3880
34920
Supplying, fitting & fixing Stainless Steel 'D' or 'H' type of size 300 mm x 19 mmtubular Handle with Grade 304, CE certified, marked & conforming to EN -1154, of approved quality of reputed brand as per direction of Eingineer-in-Charge fitted and fixed complete including all incidental charges.
7
1571
10997
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)
40mm X 6mm, 200mm Length
306
25
7650
40mm X 6mm, 125mm Length
288
20
5760
Brass hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.
250mm long.
51
597
30447
Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete.
33
1954
64482
Door stopper.(Brass)
58
117
6786
Godrej Hydraulic door closer fitted and fixed complete.
Heavy type
73
2064
150672
Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:
200mm long x 10mm dia. bolt.
111
78
8658
Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws:
150 x 75 x 4.0mm.
G.Floor
444
133
59052
100 x 63 x 3.20mm.
G.Floor, F.R.P door
144
72
10368
Anodised aluminium grip handle with base plate of approved quality fitted and fixed complete.
With base plate.
225mm grip x 16mm dia rod x 38mm plate x 3.2mm thick.
222
177
39294
Anodised aluminium decorative handle (hexagonal / fluted) of approed quality fitted and fixed complete.
150 mm plate x 10 mm dia rod x 12 mm
96
87
8352
Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge.
10-12 Micron thickness Annodizing film
Natural white
1248.98
448
559543
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work).
In 10-12 Micron thickness Annodizing film
Natural white
Louvered window.
Top, bottom and side member.
114
183
20862
Louvered Section.
57
658
37506
Cleat angle ( Non-annodized).
41.4
263
10888
Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:-
Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC. The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers.
Ground gloor
8.64
730
6307
1st floor
6.75
742
5009
2nd floor
4.14
754
3122
Supplying, fitting & fixing of partly glazed partly panelled or fully glazed single leaf Aluminium swing door of all aluminium sections viz door frame ( top and side frame), shutter ( top rail, bottom rail, lock rail,door vertical) , glazing clip made of Aluminium Alloy Extrusions conforming to IS:733-1983 and IS: 1285-1975, annodized conforming to IS:1868-1983, fitted with all other accessories viz. EPDM gusket,cleat,angle screws etc. including labour charges for fitting and fixing of aluminium door with door spring,/aluminium hinges, glass / Panel board all complete as per architectural drawings and direction of Engineer-incharge.( Excluding cost of glass/ panel board, door spring/ All hinges, door closer, door stoper,handle, tower bolt and locking arrangmentetc)10-12 Micron thickness Annodizing filmNatural white
850.5
385
327443
Supplying, fitting & fixing of Aluminium fixed partion wall of all aluminium sections viz top,bottom and side member, intermediate member , glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983and IS: 1285-1975, annodized conforming toIS:1868-1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium fixed partition wall with glass / panel board all complete asper architectural drawings and direction of Engineer-in-charge.( Excluding cost of glass/ panel board,10-12 Micron thickness Annodizing film.Natural white.
for unsupported length of vertical member upto 1.50m. height of both ends of vertical member restrained but panel with in 0.90sqm
584.91
391
228700
Providing and fixing exterior quality Aluminium Composite Panel (ACP)wall cladding on existing Al. /MS frame work with GI brackets, ACP fixedon the existing frame work by folding the edges of ACP panel (Engravingthe rear surface of ACP sheet) with CP angles, cleats and strainless Steelscrews forming groves at the periphery of ACP panel. Such grooves filledwith foam and silicon sealant etc. complete with all materials (butincluding the cost of silicon sealant), labour, scaffolding and all otherincidental charges complete in all respect as per specification anddirection of Engineer-in-charge. (Mode of payment is on finished surfacearea of ACP)
3mm thick (0.25mm Al.+2.5mm LDPE +0.25mm Al. PVDF coating)
108.69
1991
216402
Supplying heavy duty hyraulic double action floor spring along with top pin/set of pivots conforming to IS: 6315 or any approved make as per direction of Engineer in charge.
50
1733
86650
Supplying concealed type heavy duty PVC headed aluminium tower bolt for double leaf doors as per approved make and brand as per direction of Engineer-in-charge.
250mm
50
67
3350
Supplying 4 lever mortice lock or any approved make and brand as per direction of the Engineer-in-Charge..
150 mm
25
378
9450
Supplying Aluminium casted body hydraulic door closer as per I.S.I.
50
635
31750
Supplying 125 mm Dia acrylic handle for aluminium door as per approved make & brand.
Natural Colour
100
181
18100
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.
4mm thick coloured / tinted / smoke glass.
78.12
468
36560
8mm thick clear glass.
88.43
848
74989
Filling the gap in between aluminium frame & adjacent RCC / Brick/ Stone work by providing weather silicon sealant over 6mm dia backer rod of approved quality as per architectural drawings and direction of Engineer-in-Charge complete.
Upto 5 mm depth and
Ground floor
180.6
69
12461
1st floor
226.8
72
16330
2nd floor
115.8
75
8685
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.
UPVC Pipes:
110 mm. Dia.- Rain water down pipe
540
251
135540
UPVC Fittings:
Plane tee 110 mm. Dia.
36
172
6192
UPVC Fittings:
Bend 87.5 degree 110 mm. Dia.
144
160
23040
Shoe- 110 mm. Dia.
36
111
3996
M.S. or W.I. ornamental grill of approved design joints continuously welded with M.S., W.I. flats and bars for windows ,railing etc. fitted and fixed with necessary screws and lugs in ground floor. (Add extra @1% for each addl. floor up to 4th floor and @1.25% for each addl. floor above 4th floor). Grill weighing above 16 Kg./sq.mtr and above
Ground floor
34.51
9827
339130
1st floor
21.63
9925
214684
2nd floor
11.69
10023
117175
Collapsible gate with 40 mm.X 40mm x 6 mm.Tee as top and bottom guide rail, 20 mm,X10 mm,X2 mm. vertical channels 100 mm. apart in fully stretched position 20 mm. X5 mm.M.S. flats as collapsible bracing properly rivetted and washered including 38 mm. steel rollers including locking arrangement, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls , floors etc. and making good damages complete. (Add extra @1% for each addl. floor upto 5th floor and @1.25% for each addl. floor above 5th floor.)
In ground floor
42
4351
182742
1st floor
40.43
4394
177670
2nd floor
11.55
4438
51259
Supplying, fitting and fixing steel rolling grill link type shutter with 18 B.G. of approved type stel to the section 75 mm. wide fitted with coil wire spring to necessitate the fitting of required No. of C.I. pulley on heavy type solid drawn seamless steel tube complete with locking arrangement both inside and out side specially built up side guide channels including providing a hood for steel rolling shutter in the room painting two coats of approved aluminium paint over a coat of read lead primer complete.(Measurement will be made on the area of opening by the rolling shutter corrected up to 2 decimals.).
10.5
4282
44961
Supplying, fitting and fixing Stainless Steel railing consist of 38mmdia and 900mm height vertical balustrade at every two alternativesteps, 50mm dia top rail, 3 (three) nos 19mm dia horizontalStrainless steel pipe and base/cover plate with Strainless SteelGRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Matfinish, complete as per direction of the Engineer-in-charge.Weight of Strainless Steel railing per metre 6.5 Kg (approx)
240.2
9077
2180295
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)
One Coat
Water based interior grade Acrylic Primer
9549.08
3080
294112
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.
In Ground Floor:
One Coat
1483.62
3140
46586
1st floor
1323.78
3211
42507
2nd floor
710.91
3282
23332
3rd floor
240.34
3353
8059
Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)
Ground floor
11032.7
122
1345989
1st floor
1323.78
122
162454
2nd floor
710.91
123
87755
3rd floor
240.34
124
29841
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) :
(Two coats)
Standard Quality
Ground floor
9549.08
62
592043
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.
In Ground floor (Two Coat)
Normal Acrylic Emulsion.
1483.62
67
99403
1st floor
1323.78
67
89633
2nd floor
710.91
68
48640
3rd floor
240.34
69
16615
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
Ground floor
438.83
29
12726
Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
Ground floor
130.67
38
4965
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :
Ground floor
On timber or plastered surface :
With super gloss (hi-gloss)
Two coats (with any shade except white)
89.83
81
7276
On steel or other metal surface :
With super gloss (hi-gloss) -
Two coats (with any shade except white)
Ground floor
438.83
79
34668
Roof treatment by application of non toxic polyurethane modified acrylic based single component (P U Roof Coat) solvent free, cold applied polyurethane modified elastomeric waterproofing membrane with excellant UV resistant capasity as per ASTM D6083fa water based 100% acrylic elastomeric emulsion polymer latex coating used as protective coating for roofs} after preparing the surface by cleaning and repairing the roof cracks by cement & sand mortar (1:4), preferably with antishrinkage mortar (to be paid separately) if any, apply two coats along with a Priming coat (two coats of P U Roof Coat and one coat of primer coat compatible with main product as per manufacturers specification) and reinforced with or without 20 gsm Geotextile Fleece, including the cost of primer coat and base preparation, tools & Plants but excluding the cost of scaffolding and stagging complete as per direction of Engineer -in-charge. (Note: If Geotextile Fleece not uesd ,the rate would be reduced by Rs. 5/-pe.
369.45
430
159019
Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only]
Ground floor
16.2
2199
35624
1st floor
16.2
2225
36051
2nd floor
16.2
2251
36479
3rd floor
10.8
2278
24604
Supplying & laying 3mm thick pre-fabricated plastomericwater proofing membrane conforming to EN 12311-1 &ASTMD 5147, manufactured with atactic poly propylene(APP) modified premium grade asphalt , specially reinforcedwith non-woven polyester core with polyester reinforcement@160 gms per sqm & both faces covered with thermo-fusiblepolyethylene film /MineraL on top face over a coat of primer@ 0.40 lit/sqm of manufacturer's specification onsmooth,clean dry surface prepared wherever required.Lapjoint shall be provided of 75 mm in longitudinal & 100 mm intransverse direction and fused using LPG/ Propane torchemploying extra care ensuring full bondage, completeremoval of entrapped air and sealing edges into grooves inappropriate manner as per direction of Engineer -in-chargeall complete including materials,labour and applicabletaxes. (Payment shall be made on the basis of finishedsurface area.).Membrane Property: Softening Point 150 deg C, ColdFlexibility -6 deg C, Tensile Strength, N/cm 600(longitudinal), 450 (transverse), Tearing Strength, N:300 (longitudinal), 200 (transverse)
1596.46
407
649759
Supplying, fitting & fixing single skin color coated trapezodial profile for wall cladding, roof shall be made of 0.45mm RMT (Base metal Thickness)(0.50 mm TCT total coated thickness exclauding paint) G550 (min 550 yield strength) of Zincalume metallic coating ISI 5965) with high sotar reflectance index SRI value for better colling as per thermatech technalogy, 1000-1015 mm effective cover width with five major corragation, 28mm high rib spaced at 203 mm c/c with subfle square fluting in the pan and the end rib shall have anti-capillary groove and return leg. The steel sheet shall be fastened with 40 micron zinc coated or 25 micron zine-tin-alloy coated hex head, self-drilling screw as per IS 3566-2002 Class 3 fastener, the base steel shall be coated with zinc aluminium allay zincalume (AZI50) i.e. 55 % at 43.4 % zine, 1.6 %Si) minimum of 150 g/m2 coating total on both sides, pre painted with colorbond xrw (xterior roofing watting) paint system of 35 micron super confirming ISI 5956. The sheet shall be free from defects and have brand marking of the manufacturer giving product details on the back of the sheet at regular interval confirming genuinity of the material. in roof
With 0.50mm thick sheet.
312.9
896
280358
M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete.
For roof truss works
Span up to 12 Mtr
14.23
76512
1088773
Galvanised or painted wind-tie made of M.S. flats, fitted and fixed complete including cost of necessary fittings.
Made with 50 mm. X 6 mm.
72
144
10368
Hire and labour charges for shoring work (including necessary close plank walling, framing, Eucalyptus/Jhou bulla piling, strutting etc) complete as per direction of the Engineer-in-charge for foundation excavation (vertical surface are in contact with supported earth is to be measured.) (This item should be executed on specific direction of the Enginner in charge).
Depth upto 1.5 m.
708.15
376
266264
For additional depth beyond 1.5 m. and upto 3.00m
708.15
429
303796
For additional depth beyond 3.00 m.
212.45
488
103676
Bailing or pumping out water from foundation trenches.
3849.89
2088
80386
Suppply of UPVC pipe (B-type) & fittings conforming to IS-13592-1992
Double Socketed 3 Meter Length
110 mm
91
315
28665
160mm-
FOR SOIL LINE
267
598
159666
Fittings Coupler , b) 110 mm
13
85
1105
160 mm
13
261
3393
plane tee - b) 110mm
52
85
4420
160 mm
52
262
13624
Door Tee , b) 110 mm
33
195
6435
160 mm
33
514
16962
Bend 45º b) 110 mm
55
89
4895
160 mm
45
293
13185
Door Bend (T.S.) b) 110 mm
27
147
3969
160 mm
25
369
9225
Pipe Clip-
110mm
150
21
3150
160 mm
200
43
8600
W.C. Connector (150 mm long) 125 X 110(W/WC Ring) 75 mm
28
142
3976
Multi Floor Trap with Top tile & Strainer 75 mm
15
171
2565
Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin- charge. (Payment will be made on centre line measurement of the total pipeline including specials.
Above ground 110 mm dia
91
57
5187
160 mm
195
66
12870
Under ground iii) 160mm dia
72
93
6696
Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.
For Exposed Work
CPVC Pipes Class-1, SDR-11
15 mm dia
512.5
106
54325
25 mm dia
187.5
208
39000
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground.
For Exposed Work
PVC Pipes
15 mm
44.6
101
4505
25 mm dia
357
177
63189
32 mm
420
236
99120
50 mm
132
384
50688
Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. PVC Pipes
32 mm
85
250
21250
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer
2000 litre capacity
6
10434
62604
Labour for hoisting plastic water storage tank.
above 1500 litre to 5000 litre capacity.
At 3rd floor Level (154.00+ 3x 72.00)
6
370
2220
Labour for punching hole in plastic water storage tank upto 50 mm dia.
12
19
228
Compact Compact Ball Valve with SS Handle For CPVC/ UPVC Fittings
25 mm dia
2
293
586
32 mm
5
607
3035
50 mm
10
965
9650
Supply ,Fitting & Fixing of PVC Bottle waste tap
32 mm
10
157
1570
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.
635 mm X 395 mm X 420 mm
15
2869
43035
Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.
630 mm X 450 mm size
45
3260
146700
Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.
With 'P' trap
20
1421
28420
Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc.
With 'P' trap (with vent)
12
3104
37248
Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing).
580 mm X 440 mm
2
1613
3226
Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately).
450 mm X 350 mm
2
881
1762
Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.
34
1015
34510
Supplying, fitting and fixing urinal flush pipe fittings of approved brand.
C.P. urinal flush pipe fittings range of one
34
414
14076
Supplying, fitting and fixing porcelain partition wall of approved make of size 618 mm X 310 mm complete in all respect.
8
1132
9056
Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm
20
613
12260
Supplying, fitting and fixing liquid soap container. Cromium plated.
79
393
31047
Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.
900mm
45
147
6615
Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.
1050mm
45
91
4095
Supplying, fitting and fixing C.I. square jalli.
100 mm
20
73
1460
AMBULANT DISABLED TOILET
Supplying, fitting & Fixing EWC (Size- 710x370x810 mm)in white glazed vitreous chinaware of approved make supplying, fitting and fixing in position complete with necessary nut and bolts. (Model Code No. S10221114-P Trap (CRUSE SET) of CERA or equivalent.)
3
5446
16338
Supplying, fitting and fixing 10 litre white glazed vitreous chinaware of approve low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internal fittings. (Model Code No. S1060106 of CERA or equivalent.)
White
3
2406
7218
Soft Close seat cover of approved make with lid and C.P. hinges, rubber buffer and brass screws suppling, fitting and fixing complete. E W C (Model Code No. B1520118 of CERA or equivalent.)
White
3
1299
3897
Supplying, fitting and fixing Stainless steel Wall Mounted Grab Bar. Load bearing capacity 150 kg, covered by Nylon surface with contour finish (for better grip) with Anti-bacterial surface complete. (Model Code No. B2210106 of CERA or equivalent.)
600mm Long
6
1825
10950
Supplying, fitting and fixing Stainless steel Wall Mounted Hinged hand rail (750X100 mm) covered by Nylon surface with contour finish (for better grip) with two brackets.(Model Code No.B2210108 of CERA or equivalent.)
750 mm long
6
6760
40560
Supplying, fitting and fixing 15 mm Twin Flush Fitting (Model Code No. B1810112 of CERA or equivalent).
3
1041
3123
Supplying, fitting and fixing 15 mm Spatula Single Lever Basin Mixer (Model Code No. F9030451 of CERA or equivalent).
3
1973
5919
Supplying, fitting and fixing bib cock or stop cock.
Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand)
150
659
98850
Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar
70
493
34510
Supplying, fitting and fixing shower of approved brand and make.
Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand).
10
452
4520
Chromium plated Hand shower 70mm dia Round Shape Single flow with Flexible Tube & fittings(Equivalent to Code No. ESH-5512 & Model Tropical / Sumthing Special of ESSCO or similar).
34
1228
41752
Supplying, fitting and fixing towel rail with two brackets.
aluminium 25mm and 450mm
89
142
12638
Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets.
Sink only. 530mm x 430mm x 180mm.
2
3285
6570
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover (heavy type) of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C (1:1.5:3) bottom slab including supplying, fitting and fixing all necessary specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and refilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank
should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part- I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code.
For 50 users
With pakur (SAIL/TATA)
2
80140
160281
For 100 users
With pakur (SAIL/TATA)
2
100733
201467
Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.
With pakur variety
TATA/SAIL/RINL
30
6329
189875
Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials.
With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia.
With pakur variety
TATA/SAIL/RINL
4
15376
61507
PART- 2 DOCTORS QUARTER WORKS:-
Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed.
1500
10
15000
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm.
643.5
11927
76750
Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring.
622.05
19238
119670
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)
upto 150 mm thick
With earth obtained from excavation of foundation
128.7
7754
9979
Post Constructional Measures :
Anti-termite treatment to the outside of foundations with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1%concentration) with water by weight including cutting shallow channel by excavating soil along and close to the wall face ensuring uniform dispersal of the chemical emulsion to a depth of 300mm. from the ground level by rodding with 12mm. dia. M.S. rod at 150mm.interval in the channel. 1.75 litres of chemical emulsion per metre length shall be used and a balance quantity of 0.5 litres of the chemical emulsion per running metre shall then be used to treat the back fill earth by directing the spray of the imulsion towards the wall surface. The entire work is to be carried out as per specification laid down in para 4.3.1.1 of code IS-6313 (Part-III) 1981.
155.9
65
10134
Anti-termite treatment to the soil under floor with chemical emulsion by admixing chloropyrofos emulsifiable concentrate (1% concentration) with water by weight including drilling vertically 12mm. dia holes at the junction of floor and wall at 300mm. interval to reach the soil below using hand operated pressure pump to squirt chemical emulsion into the pump to squirt chemical emulsion into the holes at the rate of one litre per hole. The holes shall be sealed after operation to match with the existing floor. The entire work is to be carried out as per specification laid down in para 4.3.1.4 of code I.S.-6313 (Part-III)- 1981.
319
73
23287
Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth.
Without rolling but including ramming.
488
134
65558
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mmnominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes River Bazree
Ground floor
83.46
3821
318943
Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture]
Ground floor
M 25 Grade
Pakur Variety
322.2
6379
2055523
1st floor
92.85
6474
601171
2nd floor
92.85
6569
609992
3rd floor
21.96
6664
146356
Reinforcement for reinforced concrete work in all sorts of structuresincluding distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction
For works in foundation and upto roof of ground floor/upto 4m
Tor steel/Mild Steel
SAIL/ TATA/RINL
55.64
60969
3392339
1st floor
14.58
61399
895204
2nd floor
14.58
61829
901473
3rd floor
3.45
62259
214795
Hire and labour charges for shuttering with centering and necessary stagingupto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)
25 mm to 30 mm shuttering without staging in Foundation
1293.66
205
265200
Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work
695.86
363
252597
1st floor
695.86
381
265123
2nd floor
695.86
399
277648
3rd floor
149.79
417
62462
Brick work with 1st class bricks in cement mortar (1:4)
47
5102
239813
In Superstructure, Ground floor
22.51
5325
119875
1st floor
78.27
5436
425507
2nd floor
78.27
5547
434195
3rd floor
17.37
5658
98286
25mm. thick damp proof course with cement concrete withstone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface).
7.55
190
1435
1st floor
119.61
678
81133
2nd floor
119.61
690
82568
Labour for Chipping of concrete surface before taking up Plastering work.
Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work
3261.87
21
68499
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed andraking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] Ground floor
With 1:6 cement mortar
20 mm thick plaster
378.13
157
59548
1st floor
364.71
161
58893
2nd floor
364.71
165
60352
3rd floor
244.66
169
41465
With 1:4 cement mortar
20 mm thick plaster
Ground Floor
149.31
152
22828
1st floor
704.77
156
110571
2nd floor
704.77
160
113390
3rd floor
56.16
164
9260
With 1:4 cement mortar
10 mm thick plaster
Ground Floor
19.5
123
2408
1st floor
176.28
127
22470
2nd floor
176.28
131
23176
3rd floor
50
135
6774
Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brand conforming to IS 15622:2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.)≤ 0.08 %] in floor, skirting etc. using polymerised adhesive of 6mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course and joints grouted with admixture of white epoxy grout materials of approved brand including spacer -2mm as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other incidental charges complete as per direction of Engineerin-Charge. (Note: This work should not be executed without specific permission of Superintending Engineer
ln Ground FIoor:(size not Iess than 600mmX 600 mm X 9.5mm thick)
10
1566
15660
1st floor
169.25
1578
267077
2nd floor
169.25
1590
269108
3rd floor
38.69
1602
61981
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. Wall With Polymereised addesive & Epoxy grouting pointing including spacer- 2 mm ( When Tiles are laid over existing hard ready surface)
Area of each tile above 0.09 Sq.m [using adhesive 4.5 mm thick]
Coloured decorative
1ST FLOOR
60.12
1096
65907
2nd floor
60.12
1101
66207
Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance 0.5, Mohr's hardness 5.0, Staining resistance: Class-1, Water Absorption: E 0.5%], MOR 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor).
In Ground Floor: Sizes-600 mm x600mm x10 mm with breaking strength 1500 N
19.2
1593
30590
2nd floor
19.2
1605
30821
Supplying,fitting & fixing granite slab 15mm to 18mm thick in floor, lobby, stair, landing and treads etc. over 20mm (avg) thick base of cement morter (1:2) laid with white cement slurry @ 4.40Kg per Square meter before placing of granite and jointed with white cement slurry @ 2.0 Kg per square meter with necessary pigments and complete as per direction of Engineer-in-charge including cost of all materials, labours, curing and roughening of concrete surface complete.
In ground floor
Area of each Granite slab above 1.00 Square meter.
61.5
2997
184375
1st floor
49
3009
147488
2nd floor
49
3021
148076
3rd floor
5
3033
15170
Extra cost of labour for prefinished and premoulded Nosing to treads of steps, railing, window sill etc. of Marble Stone.
Ground flooor
32.5
258
8385
Extra cost of labour for Marble Stone Floor in treads of Steps.
123
226
27798
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).
Sal : Siliguri.
1st floor
0.63
82136
51335
2nd floor
0.63
82336
51460
Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria.
66mm x 90mm
Ground floor
59.6
497
29621
Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite doorshutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science an Technology (DST) to satisfy IS:4020 door testing performance criteria.
1St floor
32mm thick
9.66
2777
26826
2nd floor
9.66
2791
26961
Supplying solid flush type doors of deluxe decorative (both side) quality,conforming to I:S 2202 timber frame consisting of top and bottom rail and sidestyles of well seasoned timber 65mm wide each and the entire frame fitted with27.5mm wide battens places both ways in order to made the door of solid coreand internal lipping with teak, mahogony or rose wood approved decorativeveneers using phenol formaldehyde as glue etc. complete, including fitting, fixingthe shutters in position but excluding the cost of hinges and other fittings inground floor:
35mm thick shutters (single leaf) 1st floor
25.2
3969
100019
2nd floor
25.2
3983
100372
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)
40mm X 6mm, 200mm Length
72
25
1800
300mm long.
8
657
5256
Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete.
16
1954
31264
Door stopper.(Brass)
16
117
1872
Godrej Hydraulic door closer fitted and fixed complete.
Heavy type
8
2064
16512
Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:
300mm long x 10mm dia. bolt.
8
99
792
Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws:
150 x 75 x 4.0mm.
G.Floor
84
133
11172
300mm grip x 20mm dia rod x 50mm plate x 3.2 mm thick.
40
208
8320
Anodised aluminium decorative handle (hexagonal / fluted) of approed quality fitted and fixed complete.
150 mm plate x 10 mm dia rod x 12 mm
24
87
2088
M.S. or W.I. ornamental grill of approved design joints continuously welded with M.S., W.I. flats and bars for windows ,railing etc. fitted and fixed with necessary screws and lugs in ground floor. (Add extra @1% for each addl. floor up to 4th floor and @1.25% for each addl. floor above 4th floor). Grill weighing above 16 Kg./sq.mtr and above
Ground floor
6.94
9925
68881
2nd floor
4.81
10023
48213
Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge.
10-12 Micron thickness Annodizing film
Natural white
300
448
134400
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.
6mm thick coloured / tinted / smoke glass.
56.63
661
37432
Supplying, fitting and fixing Stainless Steel railing consist of 38mmdia and 900mm height vertical balustrade at every two alternativesteps, 50mm dia top rail, 3 (three) nos 19mm dia horizontalStrainless steel pipe and base/cover plate with Strainless SteelGRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Matfinish, complete as per direction of the Engineer-in-charge.Weight of Strainless Steel railing per metre 6.5 Kg (approx)
28.2
9077
255971
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.
UPVC Pipes:
110 mm. Dia.- Rain water down pipe
75.6
251
18976
UPVC Fittings:
Bend 87.5 degree 110 mm. Dia.
14
160
2240
Shoe- 110 mm. Dia.
7
111
777
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)
One Coat
Water based interior grade Acrylic Primer
2440.08
3080
75154
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.
In Ground Floor:
One Coat
132.02
3140
4145
1st floor
364.71
3211
11711
2nd floor
364.71
3282
11970
3rd floor
244.66
3353
8203
Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)
Ground floor
2572.1
122
313796
1st floor
364.71
122
44757
2nd floor
364.71
123
45020
3rd floor
244.66
124
30377
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) :
(Two coats)
Standard Quality
Ground floor
2440.08
62
151285
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.
In Ground floor (Two Coat)
Normal Acrylic Emulsion.
132.02
67
8845
1st floor
364.71
67
24695
2nd floor
364.71
68
24953
3rd floor
244.66
69
16913
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
Ground floor
56.62
29
1642
Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
Ground floor
36.29
38
1379
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :
Ground floor
On timber or plastered surface :
With super gloss (hi-gloss)
Two coats (with any shade except white)
36.29
81
2939
On steel or other metal surface :
With super gloss (hi-gloss) -
Two coats (with any shade except white)
Ground floor
56.62
79
4473
Suppply of UPVC pipe (B-type) & fittings conforming to IS-13592-1992
Double Socketed 3 Meter Length
110 mm
64
315
20160
160mm-
FOR SOIL LINE
88
598
52624
Fittings Coupler , b) 110 mm
4
85
340
160 mm
4
261
1044
plane tee - b) 110mm
24
85
2040
160 mm
30
262
7860
Door Tee , b) 110 mm
12
195
2340
160 mm
24
514
12336
Bend 45º b) 110 mm
48
89
4272
160 mm
39
293
11427
Door Bend (T.S.) b) 110 mm
27
147
3969
160 mm
25
369
9225
Pipe Clip- b) 110mm
80
21
1680
160 mm
85
43
3655
W.C. Connector (150 mm long) 125 X 110(W/WC Ring) 75 mm
8
142
1136
Multi Floor Trap with Top tile & Strainer 75 mm
16
171
2736
Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin- charge. (Payment will be made on centre line measurement of the total pipeline including specials.
Above ground 110 mm dia
64
57
3648
160 mm
64
66
4224
Under ground iii) 160mm dia
24
93
2232
Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.
For Exposed Work
CPVC Pipes Class-1, SDR-11
15 mm dia
80
106
8480
25 mm dia
53
208
11024
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground.
For Exposed Work
PVC Pipes
15 mm
29.8
101
3010
25 mm dia
114
177
20178
32 mm
138
236
32568
50 mm
40
384
15360
Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. PVC Pipes
32 mm
50
250
12500
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer
1000 litre capacity
4
5128
20512
Labour for hoisting plastic water storage tank.
upto 1500 litre to 5000 litre capacity.
At 1st floor from GL Level
4
96
384
Labour for punching hole in plastic water storage tank upto 50 mm dia.
8
19
152
Compact Compact Ball Valve with SS Handle For CPVC/ UPVC Fittings
25 mm dia
8
293
2344
32 mm
4
607
2428
50 mm
4
965
3860
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.
635 mm X 395 mm X 420 mm
2
2869
5738
Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.
630 mm X 450 mm size
16
3260
52160
Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc.
With 'P' trap (with vent)
8
3104
24832
Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.
8
1015
8120
Supplying, fitting and fixing urinal flush pipe fittings of approved brand.
C.P. urinal flush pipe fittings range of one
8
414
3312
Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm
8
613
4904
Supplying, fitting and fixing liquid soap container. Cromium plated.
8
393
3144
Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.
900mm
16
147
2352
Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.
1050mm
16
91
1456
Supplying, fitting and fixing C.I. square jalli.
100 mm
8
73
584
Supplying, fitting and fixing bib cock or stop cock.
Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand)
24
659
15816
Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar
24
493
11832
Supplying, fitting and fixing shower of approved brand and make.
Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand).
8
452
3616
Chromium plated Hand shower 70mm dia Round Shape Single flow with Flexible Tube & fittings(Equivalent to Code No. ESH-5512 & Model -
Tropical / Sumthing Special of ESSCO or similar).
8
1228
9824
Supplying, fitting and fixing towel rail with two brackets.
aluminium 25mm and 450mm
8
142
1136
Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets.
Sink only. 530mm x 430mm x 180mm.
4
3285
13140
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover (heavy type) of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C (1:1.5:3) bottom slab including supplying, fitting and fixing all necessary specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and refilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank
should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part- I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code.
For 30 users
With pakur (SAIL/TATA)
2
55629
111259
Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.
With pakur variety
TATA/SAIL/RINL
10
6329
63292
Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia.
With pakur variety
TATA/SAIL/RINL
2
15376
30754
PART-3 NURSES QUARTER WORKS:--
Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed.
328.92
10
3289
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm.
282.22
11927
33660
Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring.
282.22
19238
54293
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)
upto 150 mm thick
With earth obtained from excavation of foundation
188.15
7754
14589
Hire and labour charges for shoring work (including necessary close plank walling, framing, Eucalyptus/Jhou bulla piling, strutting etc) complete as per direction of the Engineer-in-charge for foundation excavation (vertical surface are in contact with supported earth is to be measured.) (This item should be executed on specific direction of the Enginner in charge).
Depth upto 1.5 m.
235.17
376
88424
For additional depth beyond 1.5 m. and upto 3.00m
156.78
429
67259
Bailing or pumping out water from foundation trenches.
328.92
2088
6868
Filling in foundation or plinth by Fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
149.34
75394
112593
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
62.18
24
1492
Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor
With N.B. Variety stone metal
1:3:6 proportion
23.32
3575
83368
Post Constructional Measures :
Anti-termite treatment to the outside of foundations with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1%concentration) with water by weight including cutting shallow channel by excavating soil along and close to the wall face ensuring uniform dispersal of the chemical emulsion to a depth of 300mm. from the ground level by rodding with 12mm. dia. M.S. rod at 150mm.interval in the channel. 1.75 litres of chemical emulsion per metre length shall be used and a balance quantity of 0.5 litres of the chemical emulsion per running metre shall then be used to treat the back fill earth by directing the spray of the imulsion towards the wall surface. The entire work is to be carried out as per specification laid down in para 4.3.1.1 of code IS-6313 (Part-III) 1981.
63.03
65
4097
Anti-termite treatment to the soil under floor with chemical emulsion by admixing chloropyrofos emulsifiable concentrate (1% concentration) with water by weight including drilling vertically 12mm. dia holes at the junction of floor and wall at 300mm. interval to reach the soil below using hand operated pressure pump to squirt chemical emulsion into the pump to squirt chemical emulsion into the holes at the rate of one litre per hole. The holes shall be sealed after operation to match with the existing floor. The entire work is to be carried out as per specification laid down in para 4.3.1.4 of code I.S.-6313 (Part-III)- 1981.
165.93
73
12113
Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth.
Without rolling but including ramming.
494.85
134
66478
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mmnominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes River Bazree
Ground floor
16.59
3821
63399
Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture]
Ground floor
M 25 Grade
Pakur Variety
229.9
6379
1466682
1st floor
70.49
6474
456398
2nd floor
70.49
6569
463095
3rd floor
92.45
6664
616147
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.
Pakur Variety
Ground floor
5.07
5884
29832
1st floor
5.07
5979
30314
2nd floor
5.07
6074
30795
3rd floor
5.07
6169
31277
Reinforcement for reinforced concrete work in all sorts of structuresincluding distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction
For works in foundation and upto roof of ground floor/upto 4m
Tor steel/Mild Steel
SAIL/ TATA/RINL
45.52
60969
2775328
1st floor
11.46
61399
703637
2nd floor
11.46
61829
708565
3rd floor
14.91
62259
928288
Hire and labour charges for shuttering with centering and necessary stagingupto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)
25 mm to 30 mm shuttering without staging in Foundation
369.03
205
75651
Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work
639.15
363
232011
1st floor
454.21
381
173054
2nd floor
454.21
399
181230
3rd floor
613.03
417
255634
Brick work with 1st class bricks in cement mortar (1:4)
51.25
5102
261508
In Superstructure, Ground floor
54.04
5325
287785
1st floor
54.04
5436
293783
2nd floor
54.04
5547
299781
3rd floor
74.18
5658
419740
25mm. thick damp proof course with cement concrete withstone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface).
36.39
190
6914
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) In Ground floor
104.7
666
69763
1st floor
104.7
678
71019
2nd floor
104.7
690
72275
3rd floor
104.7
702
73532
Labour for Chipping of concrete surface before taking up Plastering work.
Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work
1076.49
21
22606
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed andraking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] Ground floor
With 1:6 cement mortar
20 mm thick plaster
250.71
157
39482
1st floor
195.03
161
31493
2nd floor
195.03
165
32274
3rd floor
274.53
169
46527
With 1:4 cement mortar
15 mm thick
Ground floor
443.73
152
67842
15 mm thick
1st floor
428.92
156
67293
2nf floor
428.92
160
69009
3rd floor
509.47
164
84007
With 1:4 cement mortar
10 mm thick plaster
Ground Floor
108.45
123
13390
1st floor
108.45
127
13824
2nd floor
137.32
131
18053
3rd floor
139.02
135
18833
Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brand conforming to IS 15622:2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.)≤ 0.08 %] in floor, skirting etc. using polymerised adhesive of 6mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course and joints grouted with admixture of white epoxy grout materials of approved brand including spacer -2mm as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other incidental charges complete as per direction of Engineerin-Charge. (Note: This work should not be executed without specific permission of Superintending Engineer
ln Ground FIoor:(size not Iess than 600mmX 600 mm X 9.5mm thick)
133.29
1566
208732
1st floor
133.29
1578
210332
2nd floor
133.29
1590
211931
3rd floor
163.85
1602
262488
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. Wall With Polymereised addesive & Epoxy grouting pointing including spacer- 2 mm ( When Tiles are laid over existing hard ready surface)
Area of each tile above 0.09 Sq.m [using adhesive 4.5 mm thick]
Coloured decorative
GROUND FLOOR
43.43
1091
47393
1st floor
43.43
1096
47610
2nd floor
43.43
1101
47827
3rd floor
43.43
1106
48044
Supplying, fitting, fixing marble slab/tiles of 15mm. to 18mm. thic kness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thick base of cement mortar (1:2) laid with white cement slurry @4.4 kg/sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineer-in-charge in Ground Floor. {White cement and Pigment to be supplied by the Agency} With Makrana plain pink / Adranga pink / Garbh Gulabi/Udaypur pink / Udaypur Green / Black Bhaslana.
Area of each Slab/tile exceeding 1.00 sq.m. (This item to be executed on specific permission of Superintending Engineer).
Ground floor
28.79
2130
61350
1st floor
18.69
2142
40052
2nd floor
18.69
2154
40276
3rd floor
18.69
2166
40500
Supplying,fitting & fixing granite slab 15mm to 18mm thick in floor, lobby, stair, landing and treads etc. over 20mm (avg) thick base of cement morter (1:2) laid with white cement slurry @ 4.40Kg per Square meter before placing of granite and jointed with white cement slurry @ 2.0 Kg per square meter with necessary pigments and complete as per direction of Engineer-in-charge including cost of all materials, labours, curing and roughening of concrete surface complete.
In ground floor
Area of each Granite slab above 1.00 Square meter.
5.85
2997
17538
1st floor
5.85
3009
17608
2nd floor
5.85
3021
17678
3rd floor
5.85
3033
17749
Extra cost of labour for prefinished and premoulded Nosing to treads of steps, railing, window sill etc. of Marble Stone.
Ground flooor
232.8
258
60062
Extra cost of labour for Marble Stone Floor in treads of Steps.
25.2
226
5695
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).
Sal : Siliguri.
Ground floor
0.59
81936
48342
1st floor
0.59
82136
48460
2nd floor
0.59
82336
48578
3rd floor
0.59
82536
48696
Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite doorshutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science an Technology (DST) to satisfy IS:4020 door testing performance criteria.
In ground floor
32mm thick
3.15
2763
8703
1st floor
3.15
2777
8748
2nd floor
3.15
2791
8792
3rd floor
3.15
2805
8836
Supplying solid flush type doors of deluxe decorative (both side) quality,conforming to I:S 2202 timber frame consisting of top and bottom rail and sidestyles of well seasoned timber 65mm wide each and the entire frame fitted with27.5mm wide battens places both ways in order to made the door of solid coreand internal lipping with teak, mahogony or rose wood approved decorativeveneers using phenol formaldehyde as glue etc. complete, including fitting, fixingthe shutters in position but excluding the cost of hinges and other fittings inground floor:
35mm thick shutters (single leaf) Ground floor
21.84
3955
86377
1st floor
21.84
3969
86683
3rd floor
21.84
3983
86989
3rd floor
21.84
3997
87294
Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria..
66mm x 90mm
39.6
497
19681
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)
40mm X 6mm, 200mm Length
384
25
9600
300mm long.
64
657
42048
Door stopper.(Brass)
64
117
7488
Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:
200mm long x 10mm dia. bolt.
128
99
12672
Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws:
150 x 75 x 4.0mm.
G.Floor
192
133
25536
300mm grip x 20mm dia rod x 50mm plate x 3.2 mm thick.
128
208
26624
Anodised aluminium decorative handle (hexagonal / fluted) of approed quality fitted and fixed complete.
150 mm plate x 10 mm dia rod x 12 mm
68
87
5916
M.S. or W.I. ornamental grill of approved design joints continuously welded with M.S., W.I. flats and bars for windows ,railing etc. fitted and fixed with necessary screws and lugs in ground floor. (Add extra @1% for each addl. floor up to 4th floor and @1.25% for each addl. floor above 4th floor). Grill weighing above 16 Kg./sq.mtr and above
Ground floor
12.17
9827
119595
1st floor
12.17
9925
120791
2nd floor
12.17
10023
121986
3rd floor
12.17
10121
123182
Supplying, fitting and fixing Stainless Steel railing consist of 38mmdia and 900mm height vertical balustrade at every two alternativesteps, 50mm dia top rail, 3 (three) nos 19mm dia horizontalStrainless steel pipe and base/cover plate with Strainless SteelGRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Matfinish, complete as per direction of the Engineer-in-charge.Weight of Strainless Steel railing per metre 6.5 Kg (approx)
35.12
9077
318784
Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge.
10-12 Micron thickness Annodizing film
Natural white
528.84
448
236920
Providing and fixing of factory made uPVC Louver window (White Colour) (U value=1.9-1.3 W/m 2 K, flame resistant, self extinguishing, lead free) comprising of uPVC multi-chambered with wall thickness of 2.3mm (±0.2 mm ) duly reinforced with 1.6 mm (±0.2 mm) thick G. I. Section made from roll forming process of required length (shape & size according to uPVC profile). Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. Both vertical sides of the frame, adjustable louver mechanism having one lever shall be fitted with the provision of 4 mm glass. Window frame will be fixed to the wall with 100mm long and 8mm dia for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Fasteners and after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size, of approved quality complete in all respect as per as per approved drawing & direction of Engineer-in-Charge. (Note: Profile manufacturer & Window Manufacturer must be one & same, Only manufacturer Waranty is aceptable)
36
7149
257364
Supplying, fitting, Fixing Fly / Mosquito proof nylon net on any type of window, door shutter frame with necessary fixing arrangements complete.
159.22
834
132789
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)
One Coat
Water based interior grade Acrylic Primer
2121.18
3080
65332
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.
In Ground Floor:
One Coat
284.08
3140
8920
1st floor
195.03
3211
6262
2nd floor
195.03
3282
6401
3rd floor
228.41
3353
7659
Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)
Ground floor
2405.26
122
293442
1st floor
195.03
122
23934
2nd floor
195.03
123
24075
3rd floor
228.41
124
28359
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) :
(Two coats)
Standard Quality
Ground floor
2121.18
62
131513
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.
In Ground floor (Two Coat)
Normal Acrylic Emulsion.
284.08
67
19033
1st floor
195.03
67
13205
2nd floor
195.03
68
13344
3rd floor
228.41
69
15790
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
Ground floor
185.14
29
5369
Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
Ground floor
227.14
38
8631
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :
Ground floor
On timber or plastered surface :
With super gloss (hi-gloss)
Two coats (with any shade except white)
227.14
81
18398
On steel or other metal surface :
With super gloss (hi-gloss) -
Two coats (with any shade except white)
Ground floor
185.14
79
14626
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.
UPVC Pipes:
110 mm. Dia.- Rain water down pipe
112
251
28112
UPVC Fittings:
Plane tee 110 mm. Dia.
32
172
5504
UPVC Fittings:
Bend 87.5 degree 110 mm. Dia.
24
160
3840
Shoe- 110 mm. Dia.
8
111
888
Suppply of UPVC pipe (B-type) & fittings conforming to IS-13592-1992
Double Socketed 3 Meter Length
110 mm
64
315
20160
160mm-
FOR SOIL LINE
88
598
52624
Fittings Coupler , b) 110 mm
4
85
340
160 mm
4
261
1044
plane tee - b) 110mm
25
85
2125
160 mm
32
262
8384
Door Tee , b) 110 mm
12
195
2340
160 mm
24
514
12336
Bend 45º b) 110 mm
48
89
4272
160 mm
39
293
11427
Door Bend (T.S.) b) 110 mm
27
147
3969
160 mm
25
369
9225
Pipe Clip- b) 110mm
75
21
1575
160 mm
90
43
3870
W.C. Connector (150 mm long) 125 X 110(W/WC Ring) 75 mm
8
142
1136
Multi Floor Trap with Top tile & Strainer 75 mm
16
171
2736
Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin- charge. (Payment will be made on centre line measurement of the total pipeline including specials.
Above ground 110 mm dia
64
57
3648
160 mm
64
66
4224
Under ground iii) 160mm dia
24
93
2232
Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.
For Exposed Work
CPVC Pipes Class-1, SDR-11
15 mm dia
94.5
106
10017
25 mm dia
59.5
208
12376
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground.
For Exposed Work
PVC Pipes
15 mm
34.6
101
3495
25 mm dia
114
177
20178
32 mm
138
236
32568
50 mm
40
384
15360
Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. PVC Pipes
32 mm
40
250
10000
1000 litre capacity
8
5128
41024
Labour for hoisting plastic water storage tank.
upto 1500 litre capacity.
Upto top story from G.L.
8
225
1800
Labour for punching hole in plastic water storage tank upto 50 mm dia.
16
19
304
Compact Compact Ball Valve with SS Handle For CPVC/ UPVC Fittings
25 mm dia
16
293
4688
32 mm
8
607
4856
50 mm
8
965
7720
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.
635 mm X 395 mm X 420 mm
2
2869
5738
Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.
630 mm X 450 mm size
16
3260
52160
Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc.
With 'P' trap (with vent)
8
3104
24832
Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.
8
1015
8120
Supplying, fitting and fixing urinal flush pipe fittings of approved brand.
C.P. urinal flush pipe fittings range of one
8
414
3312
Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm
16
613
9808
Supplying, fitting and fixing liquid soap container. Cromium plated.
8
393
3144
Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.
900mm
16
147
2352
Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.
1050mm
16
91
1456
Supplying, fitting and fixing C.I. square jalli.
100 mm
8
73
584
Supplying, fitting and fixing bib cock or stop cock.
Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand)
24
659
15816
Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar
24
493
11832
Supplying, fitting and fixing shower of approved brand and make.
Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand).
8
452
3616
Chromium plated Hand shower 70mm dia Round Shape Single flow with Flexible Tube & fittings(Equivalent to Code No. ESH-5512 & Model -
Tropical / Sumthing Special of ESSCO or similar).
8
1228
9824
Supplying, fitting and fixing towel rail with two brackets.
aluminium 25mm and 450mm
8
142
1136
Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets.
Sink only. 530mm x 430mm x 180mm.
8
3285
26280
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover (heavy type) of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C (1:1.5:3) bottom slab including supplying, fitting and fixing all necessary specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and refilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part- I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code.
For 30 users
With pakur (SAIL/TATA)
2
55629
111259
Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.
With pakur variety
TATA/SAIL/RINL
10
6329
63292
Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials.
With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia.
With pakur variety
TATA/SAIL/RINL
2
15376
30753
PART-4 GROUP C QUARTER:---
Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed.
328.92
10
3289
Earth work in excavation of foundation trenches ordrains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing etc. Depth of excavation not exceeding 1,500 mm.
493.38
11927
58845
Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring.
328.92
19238
63278
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)
upto 150 mm thick
With earth obtained from excavation of foundation
164.46
7754
12752
Hire and labour charges for shoring work (including necessary close plank walling, framing, ucalyptus/Jhou bulla piling, strutting etc) complete as per direction of the Engineer-in-charge for foundation excavation (vertical surface are in contact with supported earth is to be measured.) (This item should be executed on specific direction of the Enginner in charge).
Depth upto 1.5 m.
235.17
376
88424
For additional depth beyond 1.5 m. and upto 3.00m
156.78
429
67259
Bailing or pumping out water from foundation trenches.
328.92
2088
6868
Filling in foundation or plinth by Fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
149.34
75394
112593
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
310.92
24
7462
Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor
With N.B. Variety stone metal
1:3:6 proportion
23.32
3575
83373
Post Constructional Measures :
Anti-termite treatment to the outside of foundations with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1%concentration) with water by weight including cutting shallow channel by excavating soil along and close to the wall face ensuring uniform dispersal of the chemical emulsion to a depth of 300mm. from the ground level by rodding with 12mm. dia. M.S. rod at 150mm.interval in the channel. 1.75 litres of chemical emulsion per metre length shall be used and a balance quantity of 0.5 litres of the chemical emulsion per running metre shall then be used to treat the back fill earth by directing the spray of the imulsion towards the wall surface. The entire work is to be carried out as per specification laid down in para 4.3.1.1 of code IS-6313 (Part-III) 1981.
63.03
65
4097
Anti-termite treatment to the soil under floor with chemical emulsion by admixing chloropyrofos emulsifiable concentrate (1% concentration) with water by weight including drilling vertically 12mm. dia holes at the junction of floor and wall at 300mm. interval to reach the soil below using hand operated pressure pump to squirt chemical emulsion into the pump to squirt chemical emulsion into the holes at the rate of one litre per hole. The holes shall be sealed after operation to match with the existing floor. The entire work is to be carried out as per specification laid down in para 4.3.1.4 of code I.S.-6313 (Part-III)- 1981.
165.93
73
12113
Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth.
Without rolling but including ramming.
494.85
134
66478
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mmnominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes River Bazree
Ground floor
16.59
3821
63399
Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture]
Ground floor
M 25 Grade
Pakur Variety
251.86
6379
1606779
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.
Pakur Variety
Ground floor
5.07
5884
29832
Reinforcement for reinforced concrete work in all sorts of structuresincluding distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction
For works in foundation and upto roof of ground floor/upto 4m
Tor steel/Mild Steel
SAIL/ TATA/RINL
44.88
60969
2736308
Hire and labour charges for shuttering with centering and necessary stagingupto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)
25 mm to 30 mm shuttering without staging in Foundation
369.03
205
75651
Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work
695.01
363
252289
Brick work with 1st class bricks in cement mortar (1:4)
51.25
5102
261498
In Superstructure, Ground floor
79.54
5325
423582
25mm. thick damp proof course with cement concrete withstone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface).
36.39
190
6914
Labour for Chipping of concrete surface before taking up Plastering work.
Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work
269.12
21
5652
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed andraking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] Ground floor
With 1:6 cement mortar
20 mm thick plaster
331.26
157
52167
With 1:4 cement mortar
15 mm thick plaster
Ground Floor
524.28
152
80157
With 1:4 cement mortar
10 mm thick plaster
Ground Floor
139.02
123
17165
Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance 0.5, Mohr's hardness 5.0, Staining resistance: Class-1, Water Absorption: E 0.5%], MOR 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor).
In Ground Floor: Sizes-600 mm x600mm x10 mm with breaking strength 1500 N
163.85
1581
259088
Supplying,fitting & fixing granite slab 15mm to 18mm thick in floor, lobby, stair, landing and treads etc. over 20mm (avg) thick base of cement morter (1:2) laid with white cement slurry @ 4.40Kg per Square meter before placing of granite and jointed with white cement slurry @ 2.0 Kg per square meter with necessary pigments and complete as per direction of Engineer-in-charge including cost of all materials, labours, curing and roughening of concrete surface complete.
In ground floor
Area of each Granite slab above 1.00 Square meter.
5.85
2997
17538
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. Wall With Polymereised addesive & Epoxy grouting pointing including spacer- 2 mm ( When Tiles are laid over existing hard ready surface)
Area of each tile above 0.09 Sq.m [using adhesive 4.5 mm thick]
Coloured decorative
GROUND FLOOR
43.43
1091
47393
Supplying, fitting, fixing marble slab/tiles of 15mm. to 18mm. thic kness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thick base of cement mortar (1:2) laid with white cement slurry @4.4 kg/sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineer-in-charge in Ground Floor. {White cement and Pigment to be supplied by the Agency} With Makrana plain pink / Adranga pink / Garbh Gulabi/Udaypur pink / Udaypur Green / Black Bhaslana.
Area of each Slab/tile exceeding 1.00 sq.m. (This item to be executed on specific permission of Superintending Engineer).
Ground floor
28.79
2130
61350
Supplying,fitting & fixing granite slab 15mm to 18mm thick in floor, lobby, stair, landing and treads etc. over 20mm (avg) thick base of cement morter (1:2) laid with white cement slurry @ 4.40Kg per Square meter before placing of granite and jointed with white cement slurry @ 2.0 Kg per square meter with necessary pigments and complete as per direction of Engineer-in-charge including cost of all materials, labours, curing and roughening of concrete surface complete.
In ground floor
Area of each Granite slab above 1.00 Square meter.
5.85
2997
17538
Extra cost of labour for prefinished and premoulded Nosing to treads of steps, railing, window sill etc. of Marble Stone.
Ground flooor
58.2
258
15016
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).
Sal : Siliguri.
Ground floor
0.59
81936
48342
Supplying solid flush type doors of deluxe decorative (both side) quality,conforming to I:S 2202 timber frame consisting of top and bottom rail and sidestyles of well seasoned timber 65mm wide each and the entire frame fitted with27.5mm wide battens places both ways in order to made the door of solid coreand internal lipping with teak, mahogony or rose wood approved decorativeveneers using phenol formaldehyde as glue etc. complete, including fitting, fixingthe shutters in position but excluding the cost of hinges and other fittings inground floor:
35mm thick shutters (single leaf) Ground floor
21.84
3955
86377
Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria.
66mm x 90mm
Ground floor
9.9
497
4920
Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite doorshutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science an Technology (DST) to satisfy IS:4020 door testing performance criteria.
In ground floor
32mm thick
3.15
2763
8703
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)
40mm X 6mm, 200mm Length
96
25
2400
Brass hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.
300mm long.
4
657
2628
Door stopper.(Brass)
16
117
1872
Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:
300mm long x 10mm dia. bolt.
32
99
3168
Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws:
150 x 75 x 4.0mm.
G.Floor
48
133
6384
300mm grip x 20mm dia rod x 50mm plate x 3.2 mm thick.
32
208
6656
Anodised aluminium decorative handle (hexagonal / fluted) of approed quality fitted and fixed complete.
150 mm plate x 10 mm dia rod x 12 mm
17
87
1479
M.S. or W.I. ornamental grill of approved design joints continuously welded with M.S., W.I. flats and bars for windows ,railing etc. fitted and fixed with necessary screws and lugs in ground floor. (Add extra @1% for each addl. floor up to 4th floor and @1.25% for each addl. floor above 4th floor). Grill weighing above 16 Kg./sq.mtr and above
Ground floor
12.17
9827
119595
Supplying, fitting and fixing Stainless Steel railing consist of 38mmdia and 900mm height vertical balustrade at every two alternativesteps, 50mm dia top rail, 3 (three) nos 19mm dia horizontalStrainless steel pipe and base/cover plate with Strainless SteelGRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Matfinish, complete as per direction of the Engineer-in-charge.Weight of Strainless Steel railing per metre 6.5 Kg (approx)
7.02
9077
63757
Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge.
10-12 Micron thickness Annodizing film
Natural white
132.21
448
59230
Providing and fixing of factory made uPVC Louver window (White Colour) (U value=1.9-1.3 W/m 2 K, flame resistant, self extinguishing, lead free) comprising of uPVC multi-chambered with wall thickness of 2.3mm (±0.2 mm ) duly reinforced with 1.6 mm (±0.2 mm) thick G. I. Section made from roll forming process of required length (shape & size according to uPVC profile). Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. Both vertical sides of the frame, adjustable louver mechanism having one lever shall be fitted with the provision of 4 mm glass. Window frame will be fixed to the wall with 100mm long and 8mm dia for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Fasteners and after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size, of approved quality complete in all respect as per as per approved drawing & direction of Engineer-in-Charge. (Note: Profile manufacturer & Window Manufacturer must be one & same, Only manufacturer Waranty is aceptable)
9
7149
64341
Supplying, fitting, Fixing Fly / Mosquito proof nylon net on any type of window, door shutter frame with necessary fixing arrangements complete.
39.8
834
33193
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)
One Coat
Water based interior grade Acrylic Primer
547.95
3080
16877
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.
In Ground Floor:
One Coat
284.08
3140
8920
Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)
Ground floor
832.03
122
101508
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) :
(Two coats)
Standard Quality
Ground floor
547.95
62
33973
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.
In Ground floor (Two Coat)
Normal Acrylic Emulsion.
284.08
67
19033
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
Ground floor
46.28
29
1342
Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
Ground floor
56.78
38
2158
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :
Ground floor
On timber or plastered surface :
With super gloss (hi-gloss)
Two coats (with any shade except white)
56.78
81
4599
On steel or other metal surface :
With super gloss (hi-gloss) -
Two coats (with any shade except white)
Ground floor
46.28
79
3656
Suppply of UPVC pipe (B-type) & fittings conforming to IS-13592-1992
Double Socketed 3 Meter Length
110 mm
6
315
1890
160mm-
FOR SOIL LINE
12
598
7176
Fittings Coupler , b) 110 mm
2
85
170
160 mm
2
261
522
plane tee - b) 110mm
2
85
170
160 mm
2
262
524
Door Tee , b) 110 mm
2
195
390
160 mm
2
514
1028
Bend 45º b) 110 mm
4
89
356
160 mm
4
293
1172
Door Bend (T.S.) b) 110 mm
1
147
147
160 mm
1
369
369
Pipe Clip- b) 110mm
4
21
84
160 mm
4
43
172
W.C. Connector (150 mm long) 125 X 110(W/WC Ring) 75 mm
2
142
284
Multi Floor Trap with Top tile & Strainer 75 mm
2
171
342
Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and ending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin- charge. (Payment will be made on centre line measurement of the total pipeline including specials.
Above ground 110 mm dia
6
57
342
160 mm
6
66
396
Under ground iii) 160mm dia
6
93
558
Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.
For Exposed Work
CPVC Pipes Class-1, SDR-11
15 mm dia
17
106
1802
25 mm dia
23
208
4784
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground.
For Exposed Work
PVC Pipes
15 mm
10
101
1010
25 mm dia
14
177
2478
32 mm
15
236
3540
50 mm
8
384
3072
Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. PVC Pipes
32 mm
5
250
1250
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer
1000 litre capacity
2
5128
10256
Labour for hoisting plastic water storage tank.
Upto1500 litre capacity.
Upto 1st story from G.L.
2
96
192
Labour for punching hole in plastic water storage tank upto 50 mm dia.
4
19
76
Compact Compact Ball Valve with SS Handle For CPVC/ UPVC Fittings
25 mm dia
2
293
586
32 mm
2
607
1214
50 mm
2
965
1930
Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.
630 mm X 450 mm size
4
3260
13040
Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc.
With 'P' trap (with vent)
2
3104
6208
Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.
2
1015
2030
Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm
4
613
2452
Supplying, fitting and fixing liquid soap container. Cromium plated.
2
393
786
Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.
900mm
4
147
588
Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.
1050mm
4
91
364
Supplying, fitting and fixing C.I. square jalli.
100 mm
2
73
146
Supplying, fitting and fixing bib cock or stop cock.
Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand)
12
659
7908
Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar
4
493
1972
Supplying, fitting and fixing shower of approved brand and make.
Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand).
2
452
904
Chromium plated Hand shower 70mm dia Round Shape Single flow with Flexible Tube & fittings(Equivalent to Code No. ESH-5512 & Model -
Tropical / Sumthing Special of ESSCO or similar).
2
1228
2456
Supplying, fitting and fixing towel rail with two brackets.
aluminium 25mm and 450mm
2
142
284
Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets.
Sink only. 530mm x 430mm x 180mm.
2
3285
6570
Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.
With pakur variety
TATA/SAIL/RINL
4
6329
25317
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover (heavy type) of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C (1:1.5:3) bottom slab including supplying, fitting and fixing all necessary specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and refilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank
should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part- I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code.
1
42933
42934
Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials.
With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia.
With pakur variety
TATA/SAIL/RINL
1
15376
15377
PART-V (ELECTRIC SUB_STATION) WORKS:-
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm.
422.26
11927
50363
Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring.
83.74
19238
16110
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)
upto 150 mm thick
With earth obtained from excavation of foundation
101.2
7754
7847
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
641.12
324
207723
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mmnominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes River Bazree
Ground floor
107.13
3821
409398
1st floor
0.49
3916
1919
2nd floor
11.91
4011
47777
Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture]
Ground floor
M 25 Grade
Pakur Variety
248.02
6379
1582281
1st floor
93.76
6474
607063
2nd floor
21.96
6569
144270
Hire and labour charges for shuttering with centering and necessary stagingupto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)
25 mm to 30 mm shuttering without staging in Foundation
854.97
205
175269
25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-in-Charge.
158.42
328
51962
Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work
Ground floor
601.75
363
218435
1st floor
567.07
381
216054
2nd floor
162.89
399
64993
Reinforcement for reinforced concrete work in all sorts of structuresincluding distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction
For works in foundation and upto roof of ground floor/upto 4m
Tor steel/Mild Steel
SAIL/ TATA/RINL
38.94
60969
2374089
1st floor
11.04
61399
677850
2nd floor
2.59
61829
159891
Brick work with 1st class bricks in cement mortar (1:4)
In foundation and plinth.
79.1
5102
403600
Brick work with 1st class bricks in cement mortar (1:4)
In superstructure, Ground floor
132.61
5325
706185
1st floor
124
5436
674114
2nd floor
23.9
5547
132561
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) In Ground floor
73.41
666
48914
1st floor
60.79
678
41234
2nd floor
79.88
690
55142
Supplying and laying true to line and level High Grip, Scratch resistant, Neutral to UV rays, Full Body Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and tested in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance: 0.6, Mohr's hardness 7.0, Staining resistance: Class- 1, Water Absorption E 0.5%] & MOR 35N/sq.mm and Breaking strength 1500 N for Outdoor area of building e. g. Gang-way, Corridor, Driveway, Parking lots, Courtyards, Sloping ramps, Entrance lobbies, Patios, Portico etc. set over necessary underlay and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles and removal of wax coating of top surface of tiles with warm water and cleaning the tiles using soft and dry cloth complete including the cost of materials, labour and all other incidental charges complete including backside slurry but excluding the cost of underlay
and true to the manufacturer's specification and direction of Engineer-in-Charge.
Ground floor
Sizes-300mm x 300 mm x 10 mm
3.75
783
2937
25mm. thick damp proof course with cement concrete withstone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface).
38.43
190
7302
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
238.27
24
5718
Filling in foundation or plinth by Fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
199.84
75394
150670
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).
Sal : Siliguri.
Ground floor
0.08
81936
6637
1st floor
0.2
82136
16591
2nd floor
0.08
82336
6669
Providing and fixing factory made door frame (single rebate) made of single piece extruded solid PVC profile with homogenous fine cellular structure having smooth outer integral skin having 62mm width x 32 mm thickness (the door frame is to be made with single piece extruded solid pvc profile whereas no sheet pasted profile shall be applied for door frame fabrication) and shall be fixed to wall as per instructions of Engineer – in – charge using 100 x 8 sheet metal CSK screws.
Ground floor
14.85
483
7173
1st floor
14.85
483
7173
Supplying, Fitting & Fixing 30 mm thick both side prelaminated Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in Charge.
Ground floor
4.73
2438
11532
1st floor
4.73
2452
11598
Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor.
32 mm thick shutters (single leaf)
ground floor
5.04
2359
11889
1st floor
12.18
2373
28903
2nd floor
5.04
2387
12030
Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete.
Medium (I.S.I. size 2)
9
1366
12294
Door stopper (Anodised aluminium)
9
70
630
Collapsible gate with 40 mm.X 40mm x 6 mm.Tee as top and bottom guide rail, 20 mm,X10 mm,X2 mm. vertical channels 100 mm. apart in fully stretched position 20 mm. X5 mm.M.S. flats as collapsible bracing properly rivetted and washered including 38 mm. steel rollers including locking arrangement, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls , floors etc. and making good damages complete. (Add extra @1% for each addl. floor upto 5th floor and @1.25% for each addl. floor above 5th floor.)
In ground floor
3.15
4351
13706
Supplying, fitting and fixing steel rolling grill link type shutter with 18 B.G. of approved type stel to the section 75 mm. wide fitted with coil wire spring to necessitate the fitting of required No. of C.I. pulley on heavy type solid drawn seamless steel tube complete with locking arrangement both inside and out side specially built up side guide channels including providing a hood for steel rolling shutter in the room painting two coats of approved aluminium paint over a coat of read lead primer complete.(Measurement will be made on the area of opening by the rolling shutter corrected up to 2 decimals.).
63.4
4282
271479
Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge.
10-12 Micron thickness Annodizing film
Natural white
29.7
448
13306
1st floor
100.98
448
45239
For 3-Track window : Members for Bottom frame @ 1.233 Kg per Mtr. and for Top and Side frame @ 1.067 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg
per Mtr. and Interlock member @ 0.612 Kg per Mtr.
Ground floor
74.1
448
33197
1st floor
36.66
448
16424
2nd floor
11.7
448
5242
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.
5mm thick coloured / tinted / smoke glass.
Ground floor
42.6
585
24921
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed andraking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] Ground floor
With 1:4 cement mortar
20 mm thick plaster
560.39
157
88250
1st floor
362.77
161
58580
2nd floor
260.1
165
43041
With 1:4 cement mortar
15 mm thick plaster
Ground Floor
743.56
152
113683
1st floor
754.52
156
118377
2nd floor
64.32
160
10348
With 1:4 cement mortar
10 mm thick plaster
Ground Floor
540.68
123
66758
1st floor
297.3
127
37897
2nd floor
86.92
131
11427
Neat cement punning about 1.5mm thick in wall, dado, windowsill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m.
952.28
32
31159
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)
40mm X 6mm, 200mm Length
54
25
1350
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.
100mm x 75 mm x 3.50 mm
Ground floor
72
85
6178
Iron socket bolt of approved quality fitted and fixed complete.
Ground floor
225mm long x 10mm dia bolt
18
77
1386
Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.
300mm long.
9
166
1494
Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:
With continuous plate base (Hexagonal/ Round rod)
150 mm grip x 10 mm dia rod
Ground floor
18
97
1746
M.S. or W.I. ornamental grill of approved design joints continuously welded with M.S., W.I. flats and bars for windows ,railing etc. fitted and fixed with necessary screws and lugs in ground floor. (Add extra @1% for each addl. floor up to 4th floor and @1.25% for each addl. floor above 4th floor). Grill weighing above 10 Kg./sq.mtr and up to 16 kg/sq. Ground floor
4.73
10021
47399
1st floor
6.5
10121
65788
2nd floor
1.68
10221
17172
Supplying, fitting and fixing Stainless Steel railing consist of 38mmdia and 900mm height vertical balustrade at every two alternativesteps, 50mm dia top rail, 3 (three) nos 19mm dia horizontalStrainless steel pipe and base/cover plate with Strainless SteelGRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Matfinish, complete as per direction of the Engineer-in-charge.Weight of Strainless Steel railing per metre 6.5 Kg (approx)
27
9077
245079
Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)
Ground floor
1809.25
122
220729
1st floor
385.43
122
47300
2nd floor
263.51
123
32528
Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brand conforming to IS 15622:2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.)≤ 0.08 %] in floor, skirting etc. using polymerised adhesive of 6mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course and joints grouted with admixture of white epoxy grout materials of approved brand including spacer -2mm as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other incidental charges complete as per direction of Engineerin-Charge. (Note: This work should not be executed without specific permission of Superintending Engineer
ln Ground FIoor:(size not Iess than 600mmX 600 mm X 9.5mm thick)
9.92
1566
15535
1st floor
34.98
1578
55198
Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance 0.5, Mohr's hardness 5.0, Staining resistance: Class-1, Water Absorption: E 0.5%], MOR 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor).
In Ground Floor: Sizes-600 mm x600mm x10 mm with breaking strength 1500 N
6.56
1581
10373
1st floor
6.56
1593
10452
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. Wall With Polymereised addesive & Epoxy grouting pointing including spacer- 2 mm ( When Tiles are laid over existing hard ready surface)
Area of each tile above 0.09 Sq.m [using adhesive 4.5 mm thick]
Coloured decorative
GROUND FLOOR
60.52
1091
66042
1st floor
91.69
1096
100515
Supplying,fitting & fixing granite slab 15mm to 18mm thick in floor, lobby, stair, landing and treads etc. over 20mm (avg) thick base of cement morter (1:2) laid with white cement slurry @ 4.40Kg per Square meter before placing of granite and jointed with white cement slurry @ 2.0 Kg per square meter with necessary pigments and complete as per direction of Engineer-in-charge including cost of all materials, labours, curing and roughening of concrete surface complete.
In ground floor
Area of each Granite slab above 1.00 Square meter.
64.58
2997
193608
1st floor
64.58
3009
194383
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)
One Coat
Water based interior grade Acrylic Primer
922.71
3080
28419
1st floor
960.13
3080
29572
2nd floor
105.98
3080
3264
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) :
(Two coats)
Standard Quality
Ground floor
922.71
62
57208
1st floor
960.13
62
59528
2nd floor
105.98
62
6571
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.
In Ground Floor:
Two Coat
399.07
3140
12531
1st floor
385.43
3211
12376
2nd floor
263.51
3282
8648
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.
In Ground floor (Two Coat)
Normal Acrylic Emulsion.
399.07
67
26738
1st floor
385.43
67
26097
2nd floor
263.51
68
18029
Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
Ground floor
4.86
38
185
1st floor
12.06
38
458
2nd floor
4.86
38
185
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
Ground floor
163.53
29
4742
1st floor
26.52
29
769
2nd floor
6.84
29
198
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :
Ground floor
On timber or plastered surface :
With super gloss (hi-gloss)
Two coats (with any shade except white)
4.86
81
394
1st floor
12.06
81
977
2nd floor
4.86
81
394
On steel or other metal surface :
With super gloss (hi-gloss) -
Two coats (with any shade except white)
Ground floor
163.53
79
12919
1st floor
26.52
79
2095
2nd floor
6.84
79
540
Supplying & laying 3mm thick pre-fabricated plastomericwater proofing membrane conforming to EN 12311-1 &ASTMD 5147, manufactured with atactic poly propylene(APP) modified premium grade asphalt , specially reinforcedwith non-woven polyester core with polyester reinforcement@160 gms per sqm & both faces covered with thermo-fusiblepolyethylene film /MineraL on top face over a coat of primer@ 0.40 lit/sqm of manufacturer's specification onsmooth,clean dry surface prepared wherever required.Lapjoint shall be provided of 75 mm in longitudinal & 100 mm intransverse direction and fused using LPG/ Propane torchemploying extra care ensuring full bondage, completeremoval of entrapped air and sealing edges into grooves inappropriate manner as per direction of Engineer -in-chargeall complete including materials,labour and applicabletaxes. (Payment shall be made on the basis of finishedsurface area.).Membrane Property: Softening Point 150 deg C, ColdFlexibility -6 deg C, Tensile Strength, N/cm : 600(longitudinal), 450 (transverse), Tearing Strength, N:300 (longitudinal), 200 (transverse)
317.73
407
129316
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.
UPVC Pipes:
110 mm. Dia.- Rain water down pipe
146.4
251
36746
UPVC Fittings:
Bend 87.5 degree 110 mm. Dia.
48
160
7680
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover (heavy type) of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C (1:1.5:3) bottom slab including supplying, fitting and fixing all necessary specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and refilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank
should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part- I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code.
For 20 users
With pakur (JSW/JSPL)
1
42933
42934
Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials.
With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia.
With pakur variety
TATA/SAIL/RINL
1
15376
15377
Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.
With pakur variety
(JSW/JSPL/SHYAM/SRMB/BMASL/ELECTROSSTEEL/SSL)
2
6329
12658
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992
Single Socketed 3 Meter Length
160 mm
40
546
21840
110 mm
25
292
7300
75 mm
15
196
2940
Fittings
Door Tee
75 mm
4
101
404
110 mm
4
195
780
160 mm
5
514
2570
Fittings
Bend 87.5º
75 mm
4
61
244
110 mm
4
120
480
160 mm
5
338
1690
Fittings
Vent Cowl
110 mm
4
33
132
160 MM
5
57
285
Fittings
Pipe clip
75 mm
30
16
480
110 mm
50
21
1050
160 mm
80
43
3440
Fittings
Reducer 110 X 75 mm
75 mm
4
80
320
Fittings
Reducing Tee (160 X 110 mm)
75 mm
5
405
2025
Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin- charge. (Payment will be made on centre line measurement of the total pipeline including specials.
Above ground 75 mm dia
15
45
675
110 mm dia
25
57
1425
160 mm
40
66
2640
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer
2000 litre capacity
1
5128
5128
Labour for hoisting plastic water storage tank.
Upto1500 litre capacity.
2nd floor
1
182
182
Labour for punching hole in plastic water storage tank upto 50 mm dia.
3
19
57
Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.
For Exposed Work
CPVC Pipes Class-1, SDR-11
50 mm dia
50
658
32900
32 mm dia
20
283
5660
25 mm
20
208
4160
15 mm
30
106
3180
Ball Valve
50 mm dia
4
1128
4512
25 mm dia
2
239
478
15 mm dia
4
99
396
Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.
500 mm X 400 mm size
4
2208
8832
Supplying, fitting and fixing pedestal of approved make for wash basin (white)
4
1497
5988
Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.
With 'P' trap
4
1421
5684
Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.
E.W.C.
Plastic (hallow type) white
4
380
1520
Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.
4
1015
4060
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.
470 mm X 280 mm X 340 mm
4
945
3780
Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. Polythene Flush Pipe
10
155
1550
Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets.
Sink only. 630 mm x 550 mm x 180mm.
2
3788
7576
Supplying, fitting and fixing bib cock or stop cock.
Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).
10
539
5390
Supplying, fitting and fixing bib cock or stop cock.
Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand)
4
659
2636
Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar
12
493
5916
Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar).
4
1251
5004
CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (Code No.5041 & Model - FLORENTINE of JAQUAR or similar brand)
4
1269
5076
Supplying, fitting and fixing liquid soap container. Fibre glass
4
188
752
Supplying, fitting and fixing porcelain soap tray of approved make.
Recessed soap tray of size 150 mm X 150 mm
4
338
1352
Supplying, fitting and fixing bathroom shelf of approved make of size 580mm X 150 mm (porcelain).
4
613
2452
Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.
450 mm X 300 mm
4
367
1468
Supplying, fitting and fixing towel rail with two brackets.
C.P. over brass
25 mm dia. and 750 mm long
4
475
1900
Supplying, fitting & fixing Aluminium domical grating.
100 mm
4
49
196
Anti-termite treatment to the soil under floor with chemical emulsion by admixing chloropyrofos emulsifiable concentrate (1% concentration) with water by weight including drilling vertically 12mm. dia holes at the junction of floor and wall at 300mm. interval to reach the soil below using hand operated pressure pump to squirt chemical emulsion into the pump to squirt chemical emulsion into the holes at the rate of one litre per hole. The holes shall be sealed after operation to match with the existing floor. The entire work is to be carried out as per specification laid down in para 4.3.1.4 of code I.S.-6313 (Part-III)- 1981.
199.84
73
14588
M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in charge complete including cutting to....etc.
For structural members of specified sections weighing less than 22.5 Kg./m
0.32
74571
23863
PART-VI: DEAD HOUSE:-
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm.
66.08
11927
7881
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)
upto 150 mm thick
With earth obtained from excavation of foundation
13.22
7754
1025
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
157.47
324
51020
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mmnominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes River Bazree
Ground floor
20.37
3821
77837
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.
Pakur Variety
Ground floor
2.44
5884
14357
Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture]
Ground floor
M 25 Grade
Pakur Variety
34.02
6379
217036
1st floor
1.96
6474
12690
Hire and labour charges for shuttering with centering and necessary stagingupto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)
25 mm to 30 mm shuttering without staging in Foundation
Ground floor
86.98
205
17831
25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-in-Charge.
Ground floor
0.38
328
125
Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work
Ground floor
163.49
363
59347
1st floor
25.11
381
9567
Reinforcement for reinforced concrete work in all sorts of structuresincluding distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction
For works in foundation and upto roof of ground floor/upto 4m
Tor steel/Mild Steel
SAIL/ TATA/RINL
4.43
60969
269790
1st floor
0.25
61399
15043
Brick work with 1st class bricks in cement mortar (1:4)
15.29
5102
78016
In Superstructure, Ground floor
18.53
5325
98680
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) In Ground floor
37.3
666
24853
1st floor
31.6
678
21435
Supplying and laying true to line and level High Grip, Scratch resistant, Neutral to UV rays, Full Body Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and tested in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance: 0.6, Mohr's hardness 7.0, Staining resistance: Class- 1, Water Absorption E 0.5%] & MOR 35N/sq.mm and Breaking strength 1500 N for Outdoor area of building e. g. Gang-way, Corridor, Driveway, Parking lots, Courtyards, Sloping ramps, Entrance lobbies, Patios, Portico etc. set over necessary underlay and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles and removal of wax coating of top surface of tiles with warm water and cleaning the tiles using soft and dry cloth complete including the cost of materials, labour and all other incidental charges complete including backside slurry but excluding the cost of underlay
and true to the manufacturer's specification and direction of Engineer-in-Charge.
Ground floor
Sizes-300mm x 300 mm x 10 mm
19.95
783
15627
25mm. thick damp proof course with cement concrete withstone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface).
8.53
190
1621
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
55.48
24
1332
Filling in foundation or plinth by Fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
36.29
75394
27360
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).
Sal : Siliguri.
Ground floor
0.05
81936
4097
Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in
ground floor:
35mm thick shutters
Single leaf shutters
4.32
3985
17215
Collapsible gate with 40 mm.X 40mm x 6 mm.Tee as top and bottom guide rail, 20 mm,X10 mm,X2 mm. vertical channels 100 mm. apart in fully stretched position 20 mm. X5 mm.M.S. flats as collapsible bracing properly rivetted and washered including 38 mm. steel rollers including locking arrangement, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls , floors etc. and making good damages complete. (Add extra @1% for each addl. floor upto 5th floor and @1.25% for each addl. floor above 5th floor.)
In ground floor
4.32
4351
18796
Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge.
10-12 Micron thickness Annodizing film
Natural white
57.17
448
25612
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.
5mm thick coloured / tinted / smoke glass.
10.4
585
6084
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed andraking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] Ground floor
With 1:6 cement mortar
20 mm thick plaster
214.74
157
33817
1st floor
64.2
161
10367
With 1:4 cement mortar
15 mm thick plaster
Ground Floor
74.34
152
11366
With 1:4 cement mortar
10 mm thick plaster
Ground Floor
154.86
123
19121
1st floor
14.8
127
1887
Neat cement punning about 1.5mm thick in wall, dado, windowsill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m.
153.65
32
5027
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)
40mm X 6mm, 200mm Length
6
25
150
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.
100mm x 75 mm x 3.50 mm
Ground floor
8
85
686
Iron socket bolt of approved quality fitted and fixed complete.
Ground floor
225mm long x 10mm dia bolt
2
77
154
Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.
300mm long.
Ground floor
1
166
166
Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:
With continuous plate base (Hexagonal/ Round rod)
150 mm grip x 10 mm dia rod
Ground floor
4
97
388
M.S. or W.I. ornamental grill of approved design joints continuously welded with M.S., W.I. flats and bars for windows ,railing etc. fitted and fixed with necessary screws and lugs in ground floor. (Add extra @1% for each addl. floor up to 4th floor and @1.25% for each addl. floor above 4th floor). Grill weighing above 16 Kg./sq.mtr and above
Ground floor
2.55
10021
25554
Supplying, fitting and fixing Stainless Steel railing consist of 38mmdia and 900mm height vertical balustrade at every two alternativesteps, 50mm dia top rail, 3 (three) nos 19mm dia horizontalStrainless steel pipe and base/cover plate with Strainless SteelGRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Matfinish, complete as per direction of the Engineer-in-charge.Weight of Strainless Steel railing per metre 6.5 Kg (approx)
28
9077
254156
Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)
Ground floor
213.14
122
26003
1st floor
64.2
122
7879
Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brand conforming to IS 15622:2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.)≤ 0.08 %] in floor, skirting etc. using polymerised adhesive of 6mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course and joints grouted with admixture of white epoxy grout materials of approved brand including spacer -2mm as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other incidental charges complete as per direction of Engineerin-Charge. (Note: This work should not be executed without specific permission of Superintending Engineer
ln Ground FIoor:(size not Iess than 600mmX 600 mm X 9.5mm thick)
42.3
1566
66242
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. Wall With Polymereised addesive & Epoxy grouting pointing including spacer- 2 mm ( When Tiles are laid over existing hard ready surface)
Area of each tile above 0.09 Sq.m [using adhesive 4.5 mm thick]
Coloured decorative
GROUND FLOOR
86.34
1091
94219
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)
Two Coat
Water based interior grade Acrylic Primer
62.25
4420
2751
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) :
(Two coats)
Standard Quality
Ground floor
62.25
62
3860
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.
In Ground Floor:
(Two coats)
225.14
4510
10154
1st floor
64.2
4581
2941
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.
In Ground floor (Two Coat)
Normal Acrylic Emulsion.
225.14
67
15084
1st floor
64.2
67
4347
Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
Ground floor
2.31
38
88
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
Ground floor
16.88
29
490
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :
Ground floor
On timber or plastered surface :
With super gloss (hi-gloss)
Two coats (with any shade except white)
2.31
81
187
On steel or other metal surface :
With super gloss (hi-gloss) -
Two coats (with any shade except white)
Ground floor
16.88
79
1334
Supplying & laying 3mm thick pre-fabricated plastomericwater proofing membrane conforming to EN 12311-1 &ASTMD 5147, manufactured with atactic poly propylene(APP) modified premium grade asphalt , specially reinforcedwith non-woven polyester core with polyester reinforcement@160 gms per sqm & both faces covered with thermo-fusiblepolyethylene film /MineraL on top face over a coat of primer@ 0.40 lit/sqm of manufacturer's specification onsmooth,clean dry surface prepared wherever required.Lapjoint shall be provided of 75 mm in longitudinal & 100 mm intransverse direction and fused using LPG/ Propane torchemploying extra care ensuring full bondage, completeremoval of entrapped air and sealing edges into grooves inappropriate manner as per direction of Engineer -in-chargeall complete including materials,labour and applicabletaxes. (Payment shall be made on the basis of finishedsurface area.).Membrane Property: Softening Point 150 deg C, ColdFlexibility -6 deg C, Tensile Strength, N/cm : 600(longitudinal), 450 (transverse), Tearing Strength, N:300 (longitudinal), 200 (transverse)
84.39
407
34347
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.
UPVC Pipes:
110 mm. Dia.- Rain water down pipe
33
251
8283
UPVC Fittings:
Bend 87.5 degree 110 mm. Dia.
12
160
1920
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer
1000 litre capacity
1
5128
5128
Labour for hoisting plastic water storage tank.
Upto1500 litre capacity.
Upto 1st story from G.L.
1
139
139
Labour for punching hole in plastic water storage tank upto 50 mm dia.
3
19
57
Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.
For Exposed Work
CPVC Pipes Class-1, SDR-11
50 mm dia
10
658
6580
32 mm dia
15
283
4245
25 mm dia
5
208
1040
15 mm dia
10
106
1060
Ball Valve
50 mm dia
1
1128
1128
25 mm dia
1
239
239
15 mm dia
2
99
198
Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.
550 mm X 400 mm size
1
2208
2208
Supplying, fitting and fixing pedestal of approved make for wash basin (white)
1
1497
1497
Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets.
Sink only. 630mm x 550mm x 180mm.
1
3788
3788
Supplying, fitting and fixing bib cock or stop cock.
Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).
1
539
539
Supplying, fitting and fixing bib cock or stop cock.
Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand)
1
659
659
Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar
2
493
986
Supplying, fitting and fixing liquid soap container. Fibre glass.
1
188
188
Supplying, fitting and fixing porcelain soap tray of approved make.
Recessed soap tray of size 150 mm X 150 mm
1
338
338
Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.
450 mm X 300 mm
1
367
367
Supplying, fitting and fixing towel rail with two brackets.
C.P. over brass
25 mm dia. and 750 mm long
1
475
475
Post Constructional Measures :
Anti-termite treatment to the soil under floor with chemical emulsion by admixing chloropyrofos emulsifiable concentrate (1% concentration) with water by weight including drilling vertically 12mm. dia holes at the junction of floor and wall at 300mm. interval to reach the soil below using hand operated pressure pump to squirt chemical emulsion into the pump to squirt chemical emulsion into the holes at the rate of one litre per hole. The holes shall be sealed after operation to match with the existing floor. The entire work is to be carried out as per specification laid down in para 4.3.1.4 of code I.S.-6313 (Part-III)- 1981.
42.3
73
3088
Part-VII (GROUP-D QUARTER) :-
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm.
405.79
11927
48399
Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring.
385.5
19238
74162
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)
upto 150 mm thick
With earth obtained from excavation of foundation
158.26
7754
12271
Filling in foundation or plinth by Fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
146.45
75394
110415
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
268.54
324
87007
Labour for laying single brick flat soling including ramming and dressing bed to proper level and filling joints with powderered earth.
268.54
40
10742
Brick work with 1st class bricks in cement mortar (1:4)
33.59
5102
171390
In Superstructure, Ground floor
34.79
5325
185271
1st floor
34.28
5436
186360
2nd floor
8.17
5547
45322
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) In Ground floor
197.87
666
131843
1st floor
197.87
678
134217
2nd floor
87.81
690
60616
3rd floor
32.36
702
22727
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mmnominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes River Bazree
Ground floor
68.84
3821
263073
1st floor
2.05
3916
8029
2nd floor
11.88
4011
47657
Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture]
Ground floor
M 25 Grade
Pakur Variety
235.08
6379
1499728
1st floor
66.61
6474
431276
2nd floor
39.39
6569
258779
Hire and labour charges for shuttering with centering and necessary stagingupto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)
25 mm to 30 mm shuttering without staging in Foundation
Ground floor
7.65
328
2509
1st floor
7.2
346
2491
2nd floor
1.8
364
655
9 to 12 mm thick approved quality ply board shuttering in any concrete work.
Ground floor
702.92
363
255160
1st floor
652.76
381
248702
2nd floor
287.7
399
114792
25 mm to 30 mm shuttering with out stagng in foundation etc.
599.25
205
122846
Reinforcement for reinforced concrete work in all sorts of structuresincluding distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction
For works in foundation and upto roof of ground floor/upto 4m
Tor steel/Mild Steel
SAIL/ TATA/RINL
Ground floor
46.13
60969
2812520
For works in foundation and upto roof of ground floor/upto 4m
Tor steel/Mild Steel
SAIL/ TATA/RINL
1st floor
13.07
61399
802491
For works in foundation and upto roof of ground floor/upto 4m
Tor steel/Mild Steel
SAIL/ TATA/RINL
2nd floor
4.64
61829
286889
25mm. thick damp proof course with cement concrete withstone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface).
19.61
190
3726
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
19.61
24
471
Supplying, fitting and fixing Black Stone slab used in Kitchen slab, alcove, wardrobe etc. laid and jointed with necessary adhesive Cement mortar (1:2) including grinding or polishing as per direction of Engineer-in -Charge.
In Ground Floor.
Slab Thickness above 25 mm and upto 37.5 mm
3.3
703
2323
1st floor
3.3
715
2363
Supplying,fitting & fixing granite slab 15mm to 18mm thick in floor, lobby, stair, landing and treads etc. over 20mm (avg) thick base of cement morter (1:2) laid with white cement slurry @ 4.40Kg per Square meter before placing of granite and jointed with white cement slurry @ 2.0 Kg per square meter with necessary pigments and complete as per direction of Engineer-in-charge including cost of all materials, labours, curing and roughening of concrete surface complete.
In ground floor
Area of each Granite slab above 1.00 Square meter.
49.83
2997
149388
1st floor
47.43
3009
142762
2nd floor
32.49
3021
98183
Extra cost of labour for prefinished and premoulded Nosing to treads of steps, railing, window sill etc. of Marble Stone.
Ground flooor
50
258
12900
Extra cost of labour for Marble Stone Floor in treads of Steps.
129.75
226
29324
Supplying fitting and fixing 15 to 18 mm thick Marble slab/Tile in riser of step or skirting (upto 300 mm ht) over 15mm (avg) thick base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/ Sq.m at back side of marble and jointed with white cement slurry @ 2.2 kg/ Sq.m with necessary pigments including grinding and Granite Polishing. [White cement and Pigment to be supplied by the Agency] With Makrana plain pink / Adranga Pink / Garbh Gulabi / Udaypur Pink / Udaypur green / Black Bhalsana
Area of each tile exceeding 0.3sq.m. but not exceeding 0.6 sq.m.
Ground floor
8.6
1809
15560
1st floor
8.34
1821
15190
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. Wall With Polymereised addesive & Epoxy grouting pointing including spacer- 2 mm ( When Tiles are laid over existing hard ready surface)
Area of each tile above 0.09 Sq.m [using adhesive 4.5 mm thick]
Coloured decorative
GROUND FLOOR
179.21
1091
195563
1st floor
180.49
1096
197862
Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brand conforming to IS 15622:2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.)≤ 0.08 %] in floor, skirting etc. using polymerised adhesive of 6mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course and joints grouted with admixture of white epoxy grout materials of approved brand including spacer -2mm as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other incidental charges complete as per direction of Engineerin-Charge. (Note: This work should not be executed without specific permission of Superintending Engineer
ln Ground FIoor:(size not Iess than 600mmX 600 mm X 9.5mm thick)
142.79
1470
209934
1st floor
142.79
1482
211648
M.S. or W.I. ornamental grill of approved design joints continuously welded with M.S., W.I. flats and bars for windows ,railing etc. fitted and fixed with necessary screws and lugs in ground floor. (Add extra @1% for each addl. floor up to 4th floor and @1.25% for each addl. floor above 4th floor). Grill weighing above10 km/sq.mtr and up to 16 Kg./sq.mtr and above
Ground floor
9.57
10021
95901
1st floor
11.14
10121
112750
Collapsible gate with 40 mm.X 40mm x 6 mm.Tee as top and bottom guide rail, 20 mm,X10 mm,X2 mm. vertical channels 100 mm. apart in fully stretched position 20 mm. X5 mm.M.S. flats as collapsible bracing properly rivetted and washered including 38 mm. steel rollers including locking arrangement, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls , floors etc. and making good damages complete. (Add extra @1% for each addl. floor upto 5th floor and @1.25% for each addl. floor above 5th floor.)
In ground floor
2.52
4351
10965
Supplying, fitting and fixing Stainless Steel railing consist of 38mmdia and 900mm height vertical balustrade at every two alternativesteps, 50mm dia top rail, 3 (three) nos 19mm dia horizontalStrainless steel pipe and base/cover plate with Strainless SteelGRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Matfinish, complete as per direction of the Engineer-in-charge.Weight of Strainless Steel railing per metre 6.5 Kg (approx)
30.66
9077
278301
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).
Sal : Siliguri.
Ground floor
0.65
81936
52849
1st floor
0.6
82136
49610
Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria.
66mm x 90mm
Ground floor
39.6
497
19681
Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor.
35 mm thick shutters (single leaf)
ground floor
30.24
2659
80408
1st floor
27.72
2673
74096
Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite doorshutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science an Technology (DST) to satisfy IS:4020 door testing performance criteria.
In ground floor
32mm thick
6.3
2763
17407
1st floor
6.3
2777
17495
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)
40mm X 6mm, 250mm Length
102
29
2958
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.
100mm x 58 mm x 1.90 mm
Ground floor
68
61
4155
Iron socket bolt of approved quality fitted and fixed complete.
Ground floor
300mm long x 10mm dia bolt
64
95
6080
Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.
300mm long.
Ground floor
33
166
5478
Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:
225mm long x 10mm dia. bolt.
66
84
5544
Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:
With continuous plate base (Hexagonal/ Round rod)
150 mm grip x 10 mm dia rod
Ground floor
66
111
7326
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed andraking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] Ground floor
With 1:4 cement mortar
20 mm thick plaster
677.09
157
106628
1st floor
677.42
161
109390
2nd floor
134.94
165
22330
With 1:4 cement mortar
15 mm thick plaster
Ground Floor
326.93
152
49984
1st floor
258.72
156
40591
2nd floor
226.15
160
36385
3rd floor
68.77
164
11339
With 1:4 cement mortar
10 mm thick plaster
Ground Floor
322.22
123
39785
1st floor
322.22
127
41073
2nd floor
146.33
131
19238
Neat cement punning about 1.5mm thick in wall, dado, windowsill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m.
642.69
32
21029
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)
One Coat
Water based interior grade Acrylic Primer
2280.22
3080
70231
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.
In Ground Floor:
One Coat
326.93
3140
10266
1st floor
258.72
3211
8307
2nd floor
226.15
3282
7422
3rd floor
68.77
3353
2306
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.
In Ground floor (Two Coat)
Normal Acrylic Emulsion.
326.93
62
20270
1st floor
258.72
62
16224
2nd floor
226.15
63
14342
3rd floor
68.77
64
4410
Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)
Ground floor
1816.38
122
221598
1st floor
258.72
122
31750
2nd floor
226.15
123
27916
3rd floor
68.77
124
8538
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) :
(Two coats)
Standard Quality
Ground floor
2280.22
62
141374
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
Ground floor
141.87
29
4114
Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
Ground floor
58.17
38
2210
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :
Ground floor
On timber or plastered surface :
With super gloss (hi-gloss)
Two coats (with any shade except white)
58.17
81
4712
On steel or other metal surface :
With super gloss (hi-gloss) -
Two coats (with any shade except white)
Ground floor
141.87
79
11208
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.
UPVC Pipes:
110 mm. Dia.- Rain water down pipe
126.2
251
31676
UPVC Fittings:
Plane tee 110 mm. Dia.
259.4
172
44617
UPVC Fittings:
Bend 87.5 degree 110 mm. Dia.
14
160
2240
UPVC Fittings:
shoe 110 mm. Dia.
14
111
1554
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work).
In 10-12 Micron thickness Annodizing film
Natural white
Ground floor
Louvered window.
Top, bottom and side member.
20.4
183
3733
1st floor
20.4
183
3733
Louvered Section.
Ground floor
20.4
658
13423
1st floor
20.4
658
13423
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.
4mm thick coloured / tinted / smoke glass.
6.48
468
3033
5mm thick coloured / tinted / smoke glass.
53.87
585
31514
Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:-
(A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC. The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers.
Ground gloor
3.24
730
2365
1st floor
3.24
742
2404
Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge.
10-12 Micron thickness Annodizing film
Natural white
371.22
448
166307
Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance 0.5, Mohr's hardness 5.0, Staining resistance: Class-1, Water Absorption: E 0.5%], MOR 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor).
In Ground Floor: Sizes-600 mm x600mm x10 mm with breaking strength 1500 N
11.52
898
10348
1st floor
11.52
910
10486
Pre-Constructional Anti-termite measures:
Anti termite treatment to the top surface of the consolidated earth within plinth walls with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 Litres per sq. m. of the surface before sand bed or sub-grade is laid. Holes upto 50 mm. to 75 mm. deep at 150 mm. centre to centre both ways shall be made with 12 mm, diameter mild steel rod on the surface to facilitate saturation of the soil with the chemical emulsion. The work shall be carried out as per specification described in para 6.4 of code IS- 6313 (part -II) 1981. ( Mode of measurment will be per Sq.m of plan area of plinth treated.)
183.68
81
14878
Supplying, fitting and fixing shower of approved brand and make.
Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand).
201.07
452
90884
Chromium plated shower arm 240 mm long (Equivalent to Code No. 536(A) & Model - Tropical / Sumthing Special of ESSCO or similar brand).
8
309
2472
Supplying, fitting and fixing bib cock or stop cock.
Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).
24
539
12936
Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand)
8
659
5272
Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).
40
815
32600
Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.
For Exposed Work
CPVC Pipes Class-1, SDR-11
15 mm dia
56
106
5936
20 mm dia
5
143
715
25 mm dia
24
208
4992
32 mm dia
59
283
16697
40 mm dia
5
403
2015
50 mm dia
191.4
658
125941
Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes
& fittings conforming to IS-15778: 2007
Ball Valve
25 mm dia
16
239
3824
32 mm dia
4
399
1596
40 mm dia
1
553
553
50 mm dia
4
1128
4512
Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.
8
1015
8120
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer
2000 litre capacity
4
10434
41736
Labour for hoisting plastic water storage tank.
above 1500 litre to 5000 litre capacity.
Upto 1st story from G.L.
4
154
616
Extra for each additional story
4
72
288
Labour for punching hole in plastic water storage tank upto 50 mm dia.
16
19
304
Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.
450 mm X 300 mm size
16
1979
31664
Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets.
Sink only. 530mm x 430mm x 180mm.
8
3285
26280
Supplying, fitting and fixing pedestal of approved make for wash basin (white)
8
1497
11976
Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.
600 mm
24
107
2568
Supplying, fitting and fixing pillar cock of approved make.
CP Sink Cock with Regular Swinging Spout (Table Mounted Model) (Equivalent to Code No. 5357 of JAQUAR or similar brand).
8
1022
8176
Supplying, fitting & fixing Aluminium domical grating.
150 mm
8
74
592
Supplying, fitting and fixing cast iron extension pipes for using in Traps only (connector) conforming to I.S.3989/2009 and 1729/2002 including lead caulked joints complete and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately).
100 mm X 600 mm
8
710
5680
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 Single Socketed 3 Meter Length
110 mm
106.4
292
31069
160 mm
65.2
546
35599
Fittings
Door Tee
110 mm
8
195
1560
160 mm
8
514
4112
Fittings
Bend 87.5º
110 mm
16
120
1920
160 mm
16
338
5408
Fittings
Vent Cowl
110 mm
Part- V: Electric Sub-Station--4 nos
8
33
264
160 mm
8
57
456
Fittings
Pipe Clip 110 mm
212
21
4452
160 mm
130
43
5590
Fittings
Reducing Tee (160 X 110 mm)
75 mm
16
405
6480
Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and ending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin- charge. (Payment will be made on centre line measurement of the total pipeline including specials.
Above ground 110 mm dia
106.4
57
6065
160 mm
45.2
66
2983
Under ground iii) 160mm dia
20
93
1860
Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.
With 'P' trap
8
1421
11368
Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.
E.W.C.
Plastic (hallow type) white
8
380
3040
Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. Polythene Flush Pipe
8
155
1240
Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.
450 mm X 300 mm
8
367
2936
Supplying, fitting and fixing glass shelf with aluminium guard rails.
Ordinary type with 5.5 mm sheet glass
600 mm X 125 mm
8
480
3840
Supplying, fitting and fixing liquid soap container.
Cromium plated.
8
393
3144
Supplying, fitting and fixing soap holder.
PTMT (Prayag or equivalent)
8
135
1080
Supplying, fitting and fixing towel rail with two brackets.
C.P. over brass
25 mm dia. and 750 mm long
8
475
3800
Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.
With pakur variety
TATA/SAIL/RINL
2
6329
12658
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover (heavy type) of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C (1:1.5:3) bottom slab including supplying, fitting and fixing all necessary specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and refilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank
should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part- I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code.
For 20 users
With Pakur variety. (SAIL/TATA/RINL)
2
42933
85867
Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials.
With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia.
With pakur variety
TATA/SAIL/RINL
2
15376
30753
Part- VIII: Boundary Wall :--
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm.
94.83
11927
11310
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)
With earth obtained from excavation of foundation
18.97
7754
1471
Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.
In ground floor including roof.
45.75
447
20450
Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars
In ground floor including roof.
25.57
1956
50015
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
180.36
24
4329
Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor
With N.B. Variety stone metal
1:3:6 proportion
24.53
3575
87699
Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture]
M 25 Grade
Pakur Variety
36.49
6379
232793
Reinforcement for reinforced concrete work in all sorts of structuresincluding distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction
For works in foundation and upto roof of ground floor/upto 4m
Tor steel/Mild Steel
SAIL/ TATA/RINL
3.58
60969
218332
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)
25 mm to 30 mm shuttering without staging in Foundation
471.77
205
96713
25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.
510.35
328
167395
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in Ground floor
761.4
666
507328
Labour for Chipping of concrete surface before taking up Plastering work.
724.17
21
15208
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed andraking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] With 1:4 cement mortar
20 mm thick plaster
766.8
157
120756
With 1:4 cement mortar
10 mm thick plaster
696.62
123
86012
Supplying, fitting galvanised 3 ply 12 gauge / 4 points line of barbed wire in fencing (holes already made in the body of the post) or fixed by staples tightening and fixing the wires in taut condition with straining bolts including the cost of cutting and of lapping joints in the wire as necessary but excluding the cost of galvanised staples, straining bolt and binding wire where necessary.
832
2768
23030
Supplying galvanised straining bolts (with eye at one end with double nuts and washers) fitted and fixed complete.
10 mm Dia
150 mm Lenth
120
43
5160
M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.
For structural members of specified sections weighing less than 22.5 Kg./m
2.22
74571
165548
M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge.
In ground floor.
13.4
10099
135327
Locking arrangement for Jail type doors including supplying fitting and fixing in position complete as per approved design.
25
227
5675
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.
In Ground Floor:
2192.18
3140
68834
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.
In Ground floor (Two Coat)
Normal Acrylic Emulsion
2192.18
67
146876
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
33.5
29
972
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :
On steel or other metal surface :
With super gloss (hi-gloss) -
Two coats (with any shade except white)
33.5
79
2647
PART-9 (3ROWS HUME PIPE) WORKS:--
Excavation for Structures
Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 for Rural Roads of MORD including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.
123.75
104
12870
Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor
With N.B. Variety stone metal
1:3:6 proportion
15
3575
53627
Sand filling in foundation trenches and at the back of abutments, wing-walls etc. with good local sand free from earth in layers not exceeding 15 cm. including inundating each layer by profuse water and poking and ramming layer by layer complete including supply of sand. Quality of sand is to be approved by the Engineer-in-charge.
30.6
977
29909
Providing and laying Design Mix concrete for plain / reinforced concrete work in any part of bridge (excluding bottom plugging) with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete but excluding cost of labour and materials for formwork & reinforcement works.
M-15 Grade
Using concrete mixer.
8.06
5251
42327
Bedding for Pipe
Type A (Concrete Cradle) Bedding Laying concrete cradle bedding with M15 Grade Cement Concrete as per Clause 1105 (i) for Rural Roads of MORD
2.7
5408
14603
Plain / Reinforced Cement Concrete in Substructure with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality, cement and water reducing admixtures, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete as per drawing and technical specification including the cost of necessary form work and staging complete as per drawing and technical specifications.
PCC Grade M20
Height upto 5m
24.26
6455
156602
Hire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ply wood/steel sheet plate with required bracing for any kind of plain or reinforced concrete works in all sorts of minor structure including culvert, box culvert, crossdrain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per specification and direction.
Where staging is not required.
72.95
214
15611
Providing and Laying Reinforced Cement Concrete Pipe NP4 as per design in Single Row Providing and laying reinforced cement concrete pipe NP4 with spigot socket for culverts on first class bedding of granular material in single row including fixing with cement mortar 1:2 as per Technical Specification Clause 1106 for Rural Roads of MORD.
900 mm dia
22.5
6198
139460
Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification.
Boulder Laid Dry Without Wire Crates.
1.49
1255
1871
Earthwork in filling in foundation trenches with good earth in layers not exceeding 15cm. including watering and ramming layer by layer complete with earth obtained from excavation of foundation or from fresh excavation of land arranged by Department within a lead of 150 m.
38.41
92
3534
Providing weep holes in Brick masonry / Plain / Reinforced concrete abutment, wing wall / return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20H towards drawing face. Complete as per drawing and Technical specifications.
12
115
1380
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
89.9
24
2158
PART-X INTERNAL ROAD WORKS:--
Picking up and removing old bituminous layer or sand sealing coat from old black topped surface and cleaning the exposed surface by scraping and stacking the material as directed
By mechanical means (without milling
machine) :
From 25 mm to 50 mm thick.
1374
3
5221
Box cutting or filling in Road embankment in all sorts of soil including spreading the spoils properly over the flank as necessary or on berm to approximate grade
& camber and rolling the sub-grade with power roller to proper camber and grade as per direction and satisfaction of Engineer-in-charge including uprooting and removing plants and jungles when and where necessary.
depth upto 300mm
2810
33
93854
Plant Mix Method:
Construction of granular sub-base by providing graded material, mixing in Wet Mix Plant at OMC, carriage of mixed material to work site, spreading in uniform layers with Motor grader on prepared surface in proper grade and camber, compacting with vibratory power roller to achieve the desired density, including lighting, guarding, barricading, including cost of all materials, machinery, tools and plants and cost of quality control complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision) Grading-VI Using Pakur variety Stone aggregates
379.25
2168
822498
Grading-IV Using Pakur variety Stone aggregates
379.25
2416
916310
Wet Mix Macadam Base Course Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including screening of aggregates and granular materials, premixing the material with water at OMC in Wet Mix Plant, carriage of mixed material by tipper to site, laying in uniform layers with Paver in Sub- base / Base course on well prepared surface and compacting with Vibratory Roller to achieve the desired density, including supply of all materials, machinery, fuel and lubricants, including incidental costs for lighting, guarding, barricading, making earthen bundh to protect the edges including cost of quality control complete as per Clause 406 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
758.5
2830
2147276
Supplying and laying in the specified pattern of Interlocking Concrete Block Pavement (ICBP) with concrete blocks (with concrete grade as specified as per Table 1 of IS 15658:2006) manufactured in steel mould clamped to a vibrating table by hydraulic pressure (as per cl no. 6.30 of IRC : SP: 63(2018) from BIS license manufacturer with spacer nib (small producing profiles on the vertical face of a paver block used as a device for keeping minimum joint gap in between the paving blocks as per cl. no.3.26 of IS:156358) and of specified size and shape with aspect ratio (The ratio of length to thickness of a paver block as per cl. no. 3.3 of IS:15658 ) as per table 2 of IS:15658 with flexural strength/breaking load as per annexure G of IS: 15658 on the prepared base course of specified CBR as per table 1 of IRC SP63 (2018)or else as mentioned in design and drawing with a cushion of compacted bedding sand of 25-35mm thick (grading of the bedding sand as per clause6.5.1 of IRC:SP-63) and filling up the gaps in between paver blocks with joint filling sand (the grading of the joint filling sand will be as per clause 6.5.2 of I(RC SP 63) and completing the edges with cut blocks as per cl no 8.7 of IRC SP-63(2018) with proper confinement of bedding and joint filling sand compaction, levelling and filling up of the edge gap. 100 mm thick.
Colour Decorative
3034
1635
4960590
Earth work in excavation of foundation trenches ordrains, in all sorts of soil (includingmixed soil but excluding laterite or sandstone) including removing etc. Depth of excavation not exceeding 1,500 mm.
260.1
11927
31022
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
730.5
24
17532
Providing and laying Design Mix concrete for plain / reinforced concrete work in any part of bridge (excluding bottom plugging) with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete but excluding cost of labour and materials for formwork &reinforcement works.
M-15 Grade
Using concrete mixer.
20.48
5251
107551
M-20 Grade, Using concrete mixer.
261.6
5609
1467359
Reinforcement for reinforced concrete work in all sorts of structuresincluding distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For works in foundation and upto roof of ground floor / upto4m Tor steel / Mild Steel
SAIL/ TATA/RINL
0.72
60969
43959
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)
25 mm to 30 mm shuttering without staging in Foundation
2109.06
205
432357
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed andraking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] With 1:4 cement mortar
10 mm thick plaster
326.16
123
40271
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.
NOTE:Cement 0.152 cu.m per100 sq.m.
326.16
32
10672
PART-11 U/G RESERVOIR (1.5 LAKH LITRE CAPACITY) WORKS:--
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete Depth of excavation not exceeding 1,500 mm.
200.57
11927
23922
Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring.
188.13
19238
36192
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. With earth obtained from excavation of foundation.
77.74
7754
6028
Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand.
62.05
75394
46782
Brick soling with picked jhama bricks including preparation of bed as necessary with brick joints properly filled in and packed with powdered earth and including necessary cushion of similar material below the soling (and in between layers when more than one layer is used) completes as per direction. Single brick flat soling (thickness 75 mm.)
29.72
324
9629
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.
River Bajree
14.02
3821
53578
Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture] M 25 Grade
Pakur Variety
89.1
6379
568427
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work
368.9
363
133911
Brick work with 1st class bricks in cement mortar (1:4) In foundation and plinth
11.51
5102
58718
In superstructure, ground floor
9.44
5325
50288
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] internal
15 mm thick (1:4)
352.41
152
53880
External 10 mm thick (1:4)
182.07
123
22480
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.
385.51
32
12614
Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per manufacturer's specification for water proofing layer in water tank etc. (No Departmental Cement is required)
169.48
257
43556
White washing including cleaning and smoothening surface thoroughly All floors : Three coats
210.98
2001
4222
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.
For works in foundation and upto roof of ground floor/upto 4 mi) Tor steel/Mild SteelI. SAIL/ TATA/RINL
17.49
60969
1066111
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps.
Sal : Siliguri.
0.18
81936
14667
Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor.
25mm thick shutters with 12mm thick panel of size 30 to 45 cm. Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.
3.9
2149
8381
M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.
Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.
0.9
10021
9039
Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc
11.1
38
422
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc
5.64
29
164
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. Including using of approved putty etc. on the surface, if necessary On timber or plastered surface :With super gloss (hi-gloss) -Two coats (with any shade except white)
11.1
81
899
On steel or other metal surface :
With super gloss (hi-gloss) -Two coats (with any shade except white)
5.64
79
446
Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: 150mm long x 10mm dia. bolt.
6
63
378
300mm long x 10mm dia. bolt.
2
99
198
Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.
250mm long.
1
159
159
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.
100mm. X 50mm. X 1.25mm.
18
43
774
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction 40mm X 6mm, 200mm Length
18
25
450
Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete
With continuous plate base (Hexagonal/ Round rod)
100 mm grip x 10 mm dia rod.
8
69
552
Supplying, fitting and fixing in position G.I. pipes of TATA make for underground works with all necessary accessories,specials viz.socket, bend, tee, union, cross, elbow, nipple, short piece etc.including cost of all materials,jointing materials ,cutting pipes,making threads,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting on G.I. pipes and specials with bituminous paint complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.Payment for painting will be made seperately) 150 mm dia. medium quality
4
1543
6172
Supplying, fitting and fixing cast iron spun pipe conforming to I.S. 1536/1976 with all necessary specials including cutting trenches in any soil or through masonry, concrete etc., if necessary,and mending good all damages including jointing pipes with Tyton joints as per manufacturer's specifications and filling up the trenches all complete but excluding the
cost of masonry or concrete work, if required.
Class A: (iii) 125 mm nominal dia.
8
1963
15704
Supplying fitting and fixing I.R.C. fabric mesh with covering battens including cost of screws etc complete (excluding the cost of battens).
In ground floor.
50mm x 25mm x 2.7mm x 2.7mm.
2
237
474
Supplying P.V.C. water storage tank of approved quality with closed top
with lid (Black) - Multilayer
2000 litre capacity
5
10434
52170
Labour for hoisting plastic water storage tank.
above 1500 litre to 5000 litre capacity.
At 3rd floor Level (154.00+ 3x 72.00)
5
370
1850
Labour for punching hole in plastic water storage tank upto 50 mm dia.
5
19
95
PART-12 PUMP ROOM WORKS:---
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete Depth of excavation not exceeding 1,500 mm.
13.78
11927
1644
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
28.5
324
9234
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.
N.B. Variety
4.61
3821
17621
Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture] M 25 Grade
Pakur Variety
13
6379
82935
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)
Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work
172.07
363
62461
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.
For works in foundation and upto roof of ground floor/upto 4 m
Tor steel/Mild Steel
SAIL/ TATA/RINL
1.53
60969
93344
Brick work with 1st class bricks in cement mortar (1:4) In foundation and plinth
2.48
5102
12634
In superstructure, ground floor
5.99
5325
31899
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in
ground floor
7.2
666
4797
25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface).
[Note: - Waterproofing as per item 9, polymer based paint as per item 8 (a) of subhead C of Section (C).
3
190
570
Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
4.5
75394
3393
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).
Sal : Siliguri. In ground Floor
0.04
81936
3196
Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings.
In ground floor.
(In case of non-supply of single plank, penal rate of reduction of 20% will be made) (iv) 25mm thick shutters with 12mm thick panel of size 30 to 45 cm.
Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.
In ground Floor
1.89
2149
4062
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]
With 1:4 cement mortar
15 mm thick plaster
In ground Floor Inside
55.98
152
8559
With 1:4 cement mortar
20 mm thick plaster In ground Floor
Outside
111.55
157
17567
With 1:4 cement mortar 10 mm thick plaster
In ground Floor
Ceiling
101.25
123
12501
Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding
Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge.
10-12 Micron thickness Annodizing film
Natural white
For 2-Track window : Members for Bottom frame @ 0.875 Kg per Mtr. and for Top and Side frame @ 0.778 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr.
For 3-Track window : Members for Bottom frame @ 1.233 Kg per Mtr. and for Top and Side frame @ 1.067 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr.
11.88
448
5322
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.
5mm thick coloured / tinted / smoke glass.
2.16
585
1264
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.
NOTE:Cement 0.152 cu.m per100 sq.m. In ground Floor
97.12
32
3178
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)
40mm X 6mm, 200mm Length In ground Floor
28
25
700
Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws: 75 x 45 x 2.5mm. In ground Floor
16
52
832
Supplying anodised aluminium catch hook with eye fitted and fixed to shutter and chowkat complete of best quality:
100mm long x 10mm dia. bolt.
In ground Floor
8
37
296
Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: 100mm long x 10mm dia. bolt.
In ground Floor
8
53
424
Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.
250mm long. In ground Floor
2
159
318
Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: With continuous plate base (Hexagonal/ Round rod)
100 mm grip x 10 mm dia rod. In ground Floor
8
69
552
M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.
Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr In ground Floor
1.93
10021
19341
Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials.
In ground Floor
6.3
1304
8215
Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface.
Two Coats In ground Floor Inside
81.21
70
5685
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. In ground Floor
Outside One Coat
142.4
3140
4471
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.
In ground Floor (Two Coats)
Normal Acrylic Emulsion
142.39
67
9540
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. In ground Floor
Timber surface
15.55
38
591
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. In ground Floor
Steel or other metal surface (Grill)
10.62
29
308
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : On timber or plastered surface :
With super gloss (hi-gloss) -
Two coats (with any shade except white) In Ground floor
15.55
81
1260
On steel or other metal surface : With super gloss (hi-gloss) -
Two coats (with any shade except white)
Ground floor
10.62
79
839
Supplying & laying 3mm thick pre-fabricated plastomeric water proofing membrane conforming to EN 12311-1 & ASTMD 5147, manufactured with atactic poly propylene(APP) modified premium grade asphalt , specially reinforced with non-woven polyester core with polyester reinforcement @160 gms per sqm & both faces covered with thermo-fusible polyethylene film /MineraL on top face over a coat of primer @ 0.40 lit/sqm of manufacturer's specification on smooth,clean dry surface prepared wherever required.Lap joint shall be provided of 75 mm in longitudinal & 100 mm in transverse direction and fused using LPG/ Propane torch employing extra care ensuring full bondage, complete removal of entrapped air and sealing edges into grooves in appropriate manner as per direction of Engineer -in-charge all complete including materials,labour and applicable taxes. (Payment shall be made on the basis of finished surface area.).
UPVC Pipes:
110 mm. Dia.
42
407
17094
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.
UPVC pipes:
110 mm. Dia.
28
251
7028
UPVC Fittings:
Bend 87.5 degree
110 mm. Dia.
14
160
2240
Sub Total
-
-
-
Add GST @ 18% on Rs 197661029 i.e. total amount over Item no. 1 to 645.01
197661029
18
35578985
Add Labour Welfare Cess @ 1% on 233240014.00 i.e. total amount over Item No. 1 to 645.03
233240014
1
2332400
Subtotal for Civil Work =
-
-
-
ELECTRICAL WORK
-
-
-
FOR INTERNAL ELECTRICAL WORKS:----
SUB-HEAD 1--BDB,PDB,VTPN ETC
Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. [ 13/D-9]
[Make: L&T / Legrand / ABB / SIEMENS / Schneider] C
2+8 way (For Hospita & Quarter Lift)
7
1580
11060
2+12 way (Hospital)
32
1880
60160
2+14 way (Quarter)
28
1921
53788
Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment [14/D-10]
[Make: L&T / Legrand / ABB / SIEMENS / Schneider] 6 way
15
3749
56235
Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment [Make: L&T / Legrand / ABB / SIEMENS / Schneider] 15/D-11
6 way - Up to 160A (Light load / AC outdoor Unit.)
5
8734
43670
4 way - Up to 160A (For Lift / UPS & Morgue / Quartel Lift -3)
6
9231
55386
Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. [Make: L&T / Legrand / ABB / SIEMENS / Schneider] 6/D-5
240V, 40 A DP
67
373
24991
415V, 63 A FP
15
904
13560
Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA / 35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection. [Make: L&T / Legrand / ABB / SIEMENS / Schneider] 10/D-8
125 A 4P MCCB
5
8709
43545
63 A 4P MCCB
6
7566
45396
Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [Make: L&T / Legrand / ABB / SIEMENS / Schneider] 7/D-6
6-32 SP MCB
1102
203
223706
40/63 A TP MCB
54
1532
82728
Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB horizontal / vertical / SPNDB enclosure with IP-42/43 as per GS
16/D-12. 4 / 6 / 8 / 12 Way (Vertical)
11
1147
12617
4 / 6 Way (Horizontal)
15
730
10950
SUB-HEAD 2-- Distribution Wiring
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light / fan / call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish (2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC) (Hospital & Quarter)
Average run 6 Mtr 1(i)/E-20
200
956
191200
Average run 8 Mtr 1(iii)/E-20
580
1170
678600
Average run 9 Mtr 1(iv)/E-20
430
1277
549110
Distn. wiring in 3x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V, 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish (2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC)
On Board 3(i)/E-20
210
266
55860
Avarage run 6 mtr 3(v)/E-20
20
1163
23260
SUB-HEAD 3-- Plugs & Sockets
Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. 9(a)/E-18
80
403
32240
Supply & Fixing 240 V, 2 nos. 6 A, 3 pin Modular type plug socket with 2 nos. 6A Modular type switch (Brand approved by EIC), without plug top on 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [1(b), 3(a) & 4(a)/E-17]
210
788
165480
Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Brand approved by EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc . (For Computer Board) [12/E-18]
62
1809
112158
Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. 9(b)/E-18
163
488
79544
S&F 240 V, 4 nos. 16 A, 3 pin Modular type plug socket with 4 nos. 16A Modular type switch (Brand approved by EIC), 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. 15/E-19
42
2147
90174
Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc. (for Split AC hospital/quarter) 5(a)/E-17
42
378
15876
Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (for Split AC hospital / quarter) 17/E-19
42
839
35238
Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections. (for Split AC hospital / quarter) E-17/5(b)
42
138
5796
Supply & Fixing 240 V 16 A Piano key type switch (Brand approved by EIC) on GI Modular type switch board having top cover plate and making necessary connections as required (FCU - hospital & Geyser - quarter) E-17/3(b)
74
127
9398
Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (FCU - hospital & Geyser -quarter) E-17/4(b)
74
173
12802
Supplying & Fixing GI Modular Switch Board of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. (FCU - hospital & Geyser -quarter)
2 Module E-17/2(a)
148
184
27232
Supplying & Fixing Industrial Plug & Socket board with 415 V, 30A, TPN & Earth Metal Industrial Plug socket & 30A Industrial top incl. S&F 32 A TPN / FP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection. 18/D-12
10
2855
28550
Supplying & Fixing Industrial Plug & Socket board with 240 V, 20A, SPN & Earth Metal Industrial Plug socket & 20A Industrial top incl. S&F 20 A SP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection.
17/D-13
2
967
1934
S&F of IP 66 4 Pole Enclosure Box with 4 Pole 63A, 300 mA RCCB and end termination of 4 core 4/6 sqmm Copper cable with Copper lugs and Single Compression Gland. (For Lift and AC ODU)
(Make- Legrand / L&T / Siemens / Schneider / ABB) Ns
16
5638
90208
SUB-HEAD 4-- Cu Wire & Pipe
Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the 19mm / 25mm prelaid polythene pipe / PVC rigid conduit as per GS. [Make - Finolex / Polycab / Havells / Gloster / RR Kabel / KEI] 1 / E-9
3 x 22/0.3 (1.5 sqmm) (for 1x 6A PP / 2x6 A pp / FCU / Computer)
7056
51
359856
2x36 / 0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC
(for16A PP / Geyser)
3546
70
248220
2x56 / 0.3 (4 sqmm) + 1x36 / 0.3 (2.5 sqmm) as ECC (Split AC / 4 x 6 A PP / SP Industrial Plug / Others)
1404
102
143208
2x84 / 0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC (for PDB to SPN DB)
2010
149
299490
4x84 / 0.3 (6 sqmm) + 2x56/0.3 (4 sqmm) as ECC (for 3 Phase metal plug)
200
295
59000
4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC
(For AC Outdoor Unit)
200
528
105600
4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC (for HTPN DB)
525
851
446775
Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required.
[E-14/1]
[Make - Finolex / Polycab / Havells / Gloster / RR Kabel / KEI] 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) (For Lift)
200
109
21800
2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm (For Lift)
200
127
25400
2x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC
(For Quarter Meter Connection)
300
207
62100
Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. 9/F-5
3 x 22/0.3 (1.5 sqmm)
784
16
12544
2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC
394
18
7092
2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC
156
21
3276
2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC
238
27
6426
4x84/0.3 (6 sqmm) + 2x56/0.3 (4 sqmm) as ECC
8
54
432
4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC
20
66
1320
4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC
30
96
2880
Cutting Channel of required size on masonry wall by Electric operated cutting machine incl. supplying & fixing of heavy gauge Polythene pipe of following diameter as per GS.
19 mm dia 3 mm thick 6(a)/E-3
8218
67
550606
25mm dia 3 mm thick 7(a)/E-3
2988
82
245016
Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire(synchronizing with roof/beam casting work of building construction)
(For Crossing The Colums and Bim)
19mm dia 3mm thick Polythene Pipe 1(b)/E-2
800
39
31200
Supplying & Fixing one way CI Round box with cover concealed in ceiling / wall. 20(a)/E-6
50
33
1650
Supplying & Fixing two way CI Round box with cover concealed in ceiling / wall. 20(b)/E-6
50
34
1700
Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works. 11(b)/E-4
150 mm x 100 mm x 65 mm
10
153
1530
200 mm x 150 mm x 65 mm
10
227
2270
175 mm x 100 mm x 65 mm
10
168
1680
Supply & Fixing bakelite / perspex top cover on existing Inspection board by Brass screws 13/E-5
150 mm x 100 mm x 65 mm
10
37
370
200 mm x 150 mm x 65 mm
10
52
520
175 mm x 100 mm x 65 mm
10
41
410
Supply & Delivery of 4 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [Make: Havells / Gloster / Polycab / RR Kabel]
4 Core 16 Sq. mm (UPS)
70
238
16660
4 Core 35 Sq. mm (Lift)
120
383
45960
4 Core 50 Sq. mm (Light Load VTPN)
210
497
104370
4 Core 70 Sq. mm (AC VTPN)
130
676
87880
Laying of cable as below, on existing Cable Tray and binding with suitable size GI wire.[F-3/6]
4 Core 16 Sq. mm
40
12
480
4 Core 35 Sq. mm
60
12
720
4 Core 50 Sq. mm
130
12
1560
4 Core 70 Sq. mm
70
16
1120
Laying of cable 3/4 core on wall / surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. 4 Core 16 Sq. mm
20
64
1280
4 Core 35 Sq. mm
30
76
2280
4 Core 50 Sq. mm
45
76
3420
4 Core 70 Sq. mm
30
89
2670
Laying of cable as below, after cutting floor / pavement / wall / and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish.
4 Core 16 Sq. mm
10
136
1360
4 Core 35 Sq. mm
30
136
4080
4 Core 50 Sq. mm
35
170
5950
4 Core 70 Sq. mm
30
170
5100
Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support.300x50x1.25mm (18SWG) With 25x25x3mm angle iron support [D-14/34/a(ii)]
180
393
70740
Supply & Fixing of perforated GI cable tray bend with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support.
300x50x1.25mm (18SWG. [D-15/34/b]
15
649
9735
Supplying and fixing compression type gland and finishing those for following XLPE / PVC armoured cable (2/4 / 3.5)Core as per GS. 4 Core 16 Sq. mm [7(c)/F4 & 8(b) /F5]
2
243
486
4 Core 35 Sq. mm [7(c)/F4 & 8(b) /F5]
4
342
1368
4 Core 50 Sq. mm [7(c)/F4 & 8(b) /F5]
6
434
2604
4 Core 70 Sq. mm [7(c)/F4 & 8(b) /F5]
4
508
2032
SUB-HEAD 5--- Supply of Light Fittings Supply & Delivery of 4 feet Industrial box type Twin LED fitting including S &D of 2X20 wattt LED( Polycarbonate) with glare free light distribution with CCT (5000K-6500 K) , with minimum luminious efficacy ≥105 lumen/watt or better. The LED Lamp and accessories shall have BEE Certification. (For Hospital Area)
177
1172
207444
Supply & Deliver of 4 feet Industrial box type single LED fitting including S & D of 1X20 wattt LED( Polycarbonate) with glare free light distribution with CCT (5000K-6500 K) , with minimum luminious efficacy ≥105 lumen/watt or better. The LED Lamp and accessories shall have BEE Certification. (For Hospital & Only Quarter Common Area)
178
751
133678
S&D of 240V 36 watt, recess mounted 2'x2' LED fittings with glare-free uniform illumination, suitable for 2'x2' grid ceiling with CCT ( 5000-6500) & Luminious efficacy ≥105 Lumen/ Watt or better.The LED luminaires and accessories shall have BEE Certification. (For Hospital )
24
2994
71856
Supply& Delivery of 10 watt LED Bulk Head or higher with CCT ( 5000-6500) & Luminious efficacy ≥105 & 120Lumen/ Watt or better.The LED luminaires and accessories shall have BEE Certification. (For Hospital & Only Quarter Common Area)
30
721
21630
Supply& Delivery of 240V 9 W or higher LED lamp with CCT ( 5000-6500) & Luminious efficacy ≥105 Lumen/ Watt or better.The LED luminaires and accessories shall have BEE Certification. (For Hospital )
38
79
3002
Supply & fixing of Mirror light 10 watt or higher Fitting having 6500K LED, luminous efficiency not less than 80 Lm/Watt. Driver wattage should be greater than or equal to the rated fittings wattage. The LED Lamp and accessories shall have BEE Certification.
(For Super , Ass Super & Nursing Super Toilets)
3
1598
4794
SUB-HEAD 6-- Fixing Of Light Fittings
Fixing only single /twin fluorescent light fitting complete with all accessories directly on wall / ceiling / HW round block and suitable
size of MS fastener. 14(b)/C-2
100
107
10700
Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. 17/C-2
255
213
54315
Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. 16/C-2
178
166
29548
Fixing only 2ft x2ft LED light fitting on false ceiling after cutting the false ceiling incl. necessary connection and mending goods the damages to original finish.
24
150
3600
Fixing only bulk head ceiling fitting/ wall bracket fitting on wall /ceiling by screws etc. 13/C-2
30
60
1800
Fixing oonly Lamp. 11/C-2
38
5
190
SUB-HEAD 7 -- Supply Of Fans
Supply and delivery of Heavy Duty Exhaust fans complete with all accessories having the following Model / Cat No. (Make - EPC / Crompton / Orient / havells) (For Only Hospital )
9"( 225 mm ) Speed 1370 RPM
20
2418
48360
12"( 300 mm ) Speed 1420 RPM
15
4104
61560
Supply & Delivary of 230V , 50Hz ,400 mm sweep heavy duty full metal body wall bracket fan (Cabin fan) complete with all accessories.
(Make -EPC / Crompton / Orient / havells) (For Hospital only)
20
2975
59500
S & D of 1200mm sweep AC ceiling fan with out regulator, complete with P2 burst proof Capacitor, Down rod, blades, canopy, rigidly connected Safty Tie wire etc. Incl. other accessories as necessary. (Make - Cromton / Usha / Orient) (For Hospital only)
170
2155
366350
S& Fixing only 18" (450mm) 4 (four) Blades Industrial type Bracket Fan complete with all accessories with S&F sequential timer (Approved Make) to be grouted on wall inclu. Making necesy. Connection as per direction of the EIC for lift m/c room. (Make --EPC /Crompton/Orient/havells ). (For Hospital only)
2
5387
10774
Supply & Fixing 230 V., 18" (450mm) 4 (four) Blades Industrial type Air-Circulator Pedestal Fan complete with all accessories such as Regulator, Cord and 15 Amp. 3-pin Top (Make - -EPC /Crompton/Orient/havells ).
(For Hospital only)
2
6669
13338
SUB-HEAD 8 -- FIXING OF FANS
Supplying & Fixing MS fan clamp of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991) [29/D-14 ]
50
186
9300
Supplying & Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welded, incl. S&F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with alkathene sheet, placed in order to prevent concrete from entering the box. [ 31/D-14 ]
200
259
51800
Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc [ 10 / E-18 ]
250
414
103500
Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc as per GS [ 21 (a) / C-3 ]
170
71
12070
Engraving the deptt. number with 10 mm lettering on the body as per GS [ 24 (a) / C-3 ]
170
28
4760
Extra for additional one letter incl. hifen, stroke and stop as per GS [24 (b) / C-3 ]
340
3
1020
Painting upto 10 letters of the engraved number with approved black /red paint as required as per GS [ 26 (a) / C-3 ]
170
12
2040
Extra painting for additional one letter of the engraved number as per GS [ 26 (b) / C-3 ]
170
1
170
Fixing only exhaust fan after making holes in wall as per GS
(9") [28(b)/C-4]
20
264
5280
(12") [28(b)/C-4]
15
352
5280
Supply & Fixing louver shutter ( Aluminum)on wall with necy. bolts & nuts (6 mm dia x 62 mm long) as per GS (9") [ 32(a)/D-14 ]
20
163
3260
(12") [ 32(a)/D-14 ]
15
207
3105
Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length. [29/C-4]
20
98
1960
SUB-HEAD 9-- SITC of LT panel GENERAL CONSTRUCTION:
Supply and installation of L.T. cubical type fully compartmentalized distribution panel board (Raw Normal Power), having rigid and self supporting structure fabricated with 14 SWG CRCA sheet with M.S. angle iron frame (main frame with 50 x 50 x 6 mm angle and each vertical compartment with 40 x 40x6 mm MS angle iron). The base of panel should be made with 75mm x 40mm x 4.4 mm M.S. channel. (Main LT panel comprised of One no. 315A, SFU as incomer & 315 A C / O . The incomer [Manufacturer / Fabricator having Test Certificates from CPRI]. An Auto Cad Drawing of this item has to approved by EIC before making of it mentioning all major technical details with specification and Make of each and individual part.
All incoming & outgoing switches are to be housed in respective compartments hinged and gasket doors at the front. All doors should have panel locking arrangement in such a fashion that it can not be on unless the feeder remains in off position. The rear panel should gasketed wire net guard for ventilation arrangement will be made of easy accessibility to each compartment by providing rear panel doors with locking system . The panel is to be properly gasketed to prevent the dust & vermin.
1
226310
226310
All vertical bus bar chambers is to properly arrange and all electrical equipments are to be fixed by nuts and bolts on suitable Hylam board / porcelain insulators of adequate size and dimension. The outgoing feeder connection from respective switches are to be made at rear side of panel by means of busbar, copper multi core cables, to be terminated on bolted type terminals for cable connection or on bush insulators for bus bar connection. Each compartment will be providing with DMC/FRP board at back side.
[Make: ABB / Legrand / L&T / Siemens / Schneider Make, All the other accessories will be Legrand / Siemens / L&T Make].
INCOMER:
i) 415 V, 315 A TPN SFU with 3 nos DIN type HRC Fuse -----1 no.
(Make: L&T / Siemens / ABB / Schneider)
2) 415V, 315 A FP onload manual changeover unit open execution type - 1 Set
[Make: ABB / Legrand / L&K (formerly L&T) / Siemens / Schneider).
BUSBAR:
500 V, 500 Amp capacity 99.9% – 99.5% electrolytic tinned 4 bar copper bus bar mounted on non-hygroscopic porcelain insulator / hylam sheet having sufficient di-electric strength duly wrapped with colour PVC tapes (Red, yellow, blue & black) for phases & neutral identification- 1 set. 1 Sets.
-
-
-
OUTGOING :
415 V, 125 A TPN SFU with 3 nos DIN type HRC Fuse -- 3Set
(Make: L&T / Siemens / ABB / Schneider / Legrand) 415 V, 63A TPN SFU with 3 nos DIN type HRC Fuse ----- 4 Set
(Make: L&T / Siemens / ABB / Schneider / Legrand)
415 V, 32A TPN SFU with 3 nos DIN type HRC Fuse ------ 1 Set
(Make: L&T / Siemens / ABB / Schneider / Legrand)
E.I. Danger Board of suitable size ------- 1 no.
Metering Panel
a) Multipurpose Meter Digital Type Load Monitor (Make L&T / Legrand / ABB) - 1 No., b) LCD single function Meter (Make - L& T / Legrand / ABB) for ammeter --- 1 nos.
c) LCD single function Meter (Make - L& T / Legrand / ABB) for voltmeter-- 1 nos..
c) Indicating LED Lamp with colour glasses showing (Red / Yellow / Blue / Amber) (L&T / ABB / Siemens) - 1 Set. d) 500/5 Amp ratio C.T (Kappa or equivalent) --- 3 nos.
e) Supplying & Fixing 6 Amp SP MCB---- 3 nos.
f) Slide lock fuse---- 3 nos.
Interconnection :-
All interconnection between incoming main to Busbar are to be made with suitable size electrolytic tinned Copper bars or equivalent flexible pvc insulated multistranded single core Cu. cable and the same between busbar to all outgoing mains and also for metering arrangements are to be made by suitable size of Copper wire with proper socketing of the end of each wire leads.
-
-
-
Earthing :-
A separate continuous GI earth busbar of size 50mm x 6mm is to be placed at the inside bottom of the panel and run across the full length of the panel board atleast extended for 75 mm at both side end of panel and should have drill hole to fit in 12x50mm GI nut bolt for earth strip connection. The complete panel board is to be spray painted after required surface treatment by 7 tanks process / sand blasting with 2 coat of red oxide primer & 2 coat of finished paint over dried or powder coating.
Installation :-
The complete panel board is to be installed on suitable brick padestal as directed by the E.I.C.
All incoming / outgoing switches is to be properly lebeled on Acrylic sheet as per direction of EIC.
-
-
-
SUB-HEAD 11 -- Earthing
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe
18
1465
26370
Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil
54
230
12420
Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe. [G-2/3(a)]
18
979
17622
Extra for treatment of soil by using salt & charcoal or coke for
plate electrode. [G-2/3(b)]
18
568
10224
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required . [G-2/4(a)]
10
231
2310
Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages . [G-2/5(a/b)]
8 SWG
200
10
2000
Stranded GI wire (i) 7/14 SWG
250
17
4250
Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. [G-3/5(d)]
250
148
37000
SUB-HEAD 12 -- Lightning Conductor S & F Lightning Conductor Air Terminal made of 20 mm dia 1000 mm long GI pipe (ISI Medium) having five discharge prongs of 4 SWG GI (Hot Dip) wire at top duly soldered/ welded with 7/16 stranded GI (Hot Dip) wire and 85 mm dia 6 mm thick GI base plate at bottom incl. necessary holes etc. complete duly grouted on the parapet etc. in CC mortar ( 4:2:1), including thimble joints of 7/16 SWG wire and (25 x 6) mm GI strip with SS nuts, bolts & washers. (P-J-2/Item-14 + NS)
(Hospital & Quarter)
60
484
29040
Supply & fixing of 25 mm x 6 mm thick GI (Hot Dip) flat / strips for Horizontal & Vertical run on wall / floor with GI shaddles as required including drilling holes, bolts, nuts, washers, etc./ and mending good the damages to building works . (Page : G-3/Item-5d).
1580
148
233840
Cutting cornices/ steps etc. including cutting recess in buildings etc. & supply & fixing 15 mm bore (ISI-Medium) GI pipe protection as below and mending good damages to the building works: (P:J-1/Item-4)
i) Length upto 0.5 Mtr
120
79
9480
ii) Length above 0.5 Mtr
60
158
9480
Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation, per storey of building per vertical run. (P : J-1/Item-7)
180
166
29880
Supply & Fixing of Testing Joints by 25 mm x 6 mm thick GI (Hot Dip) strip 125 mm long on wall after making suitable arrangement to establish a clearance of 50mm from wall for making junction connection with vertical conductor and conductor from earth electrode complete with S & F GI bolts, nuts, check-nuts, spring washers etc. as required. (Rate arrived from G.S. Page :J-2/Item-13)
15
201
3015
Earthing with 65 mm dia GI pipe (TATA-Medium) 3.0 Mts. long with welded 2 nos. half circle bracket made of GI strip (65 x 8) mm. with two holes on extended portion of the each strip of length min. 250 mm , and 1 No. 50 mm x 6 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 65 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts. (Rate arrived from G.S. Page : G-1/Item-2d)
15
4306
64590
Excavation of soil for installation of Earth Electrode and filling & ramming as to GS. (For morum soil)(Page : G-1/Item-1b) .
45
306
13770
Supply, Laying & Fixing of 50mm x 6mm galvanized (Hot Dip) steel strip in underground trench for interconnection between the Earth Points by joining (As per item no 11). (Rate arrived from G.S. Page : K-3/Item -134 + G-1/Item-1a.)
610
229
139690
Cost of Jointing for Horijontal & vertical run of GI strip through welded joint of (25 x 6) mm or (50 x 6) mm GI Strip to Lap joints/ 'T' joints, etc. and painting the joints with 2 (two) coats of bituminous paint. (NS)
365
64
23360
SUB-HEAD 13 -- MISCELENEOUS
Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board [20a/D-13]
29
185
5365
Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. [Make: L&T / Legrand / ABB / SIEMENS / Schneider] 4(a)/D-3
63A TPN SFU
6
4421
26526
Quarter Common Electrical Power Supply Arrangement
Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – (As per Drawing no. 470 of PWD Specification Book – May 1991) 19(b)/D-13
4-Bar, 415V, 100A, Cu Bar
4
2833
11332
S & F of 25mm thick wooden board fixing on the iron angle frame on the wall for fixing the WBSEDECL METER , KIT KAT FUSE.
50
100
5000
S&F of 240 V 32 A Kit kat fuse (Porcelain Fuse carrier & Base) on the existing wooden board with incl all necessary item.
26
146
3796
Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting he wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment. 2 Way. 11/D-9
33
289
9537
Supplying and fixing 32 A 240/415 V MCB Isolator on din rail of existing DBs and necessary connection D-5/6
33
345
11385
S & F 25A timer controller in double door phosphatised powder coated 10 way SPN DB, din rail with IP-43 protection with electrical accessories & front door locking arrangement with all connection , a) 10+2 W SPN DB with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. -2 (one) no.
b) 32 A DP MCB Isolator—1 (one) no
c) 10A SP MCB —3 (one) no
d) 32 A, 240 V DP Contactor with Auxilary Contactor (1 NO-1 NC)- 1 (One) no.
e) Daily & weekly programmable basis Astro time switch, ,6 yrs. Battery backup,key pad lock features- 1 (one) no
f) LED Indicator Lamp-1 set
g) Blank Plate as required.
[ Legrand / Schneider / Seimens / ABB / L &T]
(For Quarter Compound Light & Common area Light)
4
6558
26232
Preparation & submission of a Electrical Distribution drawing of new installation (by AUTO-CAD) showing HT & LT cable ducts, Single line power diagram, EI layout, Earthing system (i.e. equipment and neutral earthing) etc. (A3 Page Printed copy 4 Set & Soft copy)
1
2000
2000
Sub Total
-
-
-
Add GST @ 18% on total amount over item No. 646 to 748.01
8258486
18
1486527
Add Labour Welfare Cess @ 1% on Rs 9745013.00 i.e. total amount over Item No. 646 to 750
9745013
1
97450
Subtotal for Electrical Work =
-
-
-
CIVIL WORK(Part-B)
-
-
-
PART-13 BORING OF TUBE WELL WORKS:--
Drilling borehole by Rig machine with Odex-165 (Simultaneous driving of casing pipe) method of drilling through any kind of soil, boulder, rock etc. upto the required depth. This item includes the cost of hiring of Rig machine, Compressor, Supporting vehicle and other machinery & equipments with operators, drivers, laborers etc. Proportionate cost of drilling tools and accessories such as Hammer, Pilot bit, Reamer bit, Guide device, Guide sleeve etc. Cost of consumable materials like fuel & lubricants, electrode for welding, any other related equipment, materials and service etc.
GL to 60 mtr.
120
2779
333480
60 mtr. To 100 mtr.
80
3056
244558
100 mtr to 120 mtr.
40
3334
133386
Lowering and placing of filter assembly of required length and Extraction and partening off the casing pipe of required length.
2
22286
44573
Mobilisation and transportion of the Rig machine and its accessories and others materials, etc. to the site.
2
21452
42905
Development of the tubewell by Air Compressor and BHT/ other suitable pump and Yield Testing by BHT/ other suitable pumping machinery upto the satisfaction of EIC. It includes arrangement of all machinery, supply of fuel & lubricants, laborers, any others etc.
2
47672
95344
Supply and Delivery of 183 mm ID/196 mm OD MSERW fin cut pipe
42
1751
73582
Supply and Delivery at site of 100 mm ID UPVC Medium Well Screen (RMS) Pipes with Ribs conforming to IS 12818:2010 (CIPET Certified)
230
983
226145
Supply and Delivery of Bit tube (1.5 mtr. Long) for Odex-165
2
3575
7151
Supply and Delivery of Casing Shoe (for Odex-165)
2
18270
36541
Packer Assembly (for Odex-165)
2
13771
27543
Supply and Delivery of MS TW Specials (Clamp, Cap, Bail plug, Lugs, Ring etc.)
2
4040
8080
Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.)
PVC Pipes
40 mm
60
370
22239
PVC Pipes
80 mm
40
947
37899
Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).
4
6663
26653
Supply,delivery & Installation 400 volt 3 phase(2.2 kw) 3H P Submersible pump motor set 40 mm outlet dia of discharge capacity 6 m3 per hour in 59 mtr head (KSB make model no CORA 12 C/10) with 3 mtr Flat cabe.(2.5 sq.mm)[CORA 12C/10 + DMADX(S)100-10/23)
2
28570
57140
Supply and fixing 500 volt 3ph. Dol submersible control panel including ammeter,voltmeter,including lamp(R.Y.B) with selector switch completed set fixed on flat iron frame on wall as to GS.(L & Tmake cat no SS97756 COTO relay range 4A to 6.5 AMU -G6 DOL)
2
5837
11674
Supply and fixing 415 volt, Single phase preventor as per GS.(Make L & T, SPPR type,cat no CS94824DOOO)
2
782
1564
PART-14 FIRE PROTECTION WORKS:--
A. FIRE WATER PUMPING SYSTEM
(A) Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required:
(B) Horizontal centrifugal pump of cast iron body & bronze impeller with stainless steel shaft with gland packing conforming to IS 1520.
(C) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
(D) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.
(E) Suitable cement concrete foundation duly plastered with anti vibration pads.
1620 lpm at 70 m Head
(Make- Kirloskar, Mather & Platt)
2
331972
663944
(A) Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required (Diesel Driven Pump)
(B) Horizontal centrifugal pump of cast iron body & bronze impeller with stainless steel shaft with gland packing conforming to IS 1520.
(C) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.
(D) M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.
(E) Suitable cement concrete foundation duly plastered and with anti vibration pads.
1620 lpm at 70 m Head
(Make- Kirloskar, Mather & Platt)
1
592194
592194
(A) Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Jockey Pump)
(B) Horizontal centrifugal pump of cast iron body & bronze impeller with stainless steel shaft with gland packing conforming to IS 1520.
(C) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS: 325.
(D) M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.
(E) Suitable cement concrete foundation duly plastered and with anti vibration pads.
180 lpm at 70 m Head (Make- Kirloskar, Mather & Platt)
1
103304
103304
CONTROL PANELS
Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required:
INCOMING
250A, 50kA 4 Pole MCCB, lcs=100% lcu rating
Digital Voltmeter 0-500V with selector switch
Digital Ammeter (0-250 A) with selector swtich & CTs etc.
LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps
Set of Copper Bus Bar 300A
OUTGOING
(Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)
1
245730
245730
MAIN FIRE PUMP
125 A, 50kA TPN MCCB, lcs=100% lcu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation,
selector switch for local/remote, auto/manual/OFF operation.
JOCKEY PUMP
63 A, 50kA TPN MCCB, lcs=100% lcu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.
DIESEL ENGINE CONTROL
Control for diesel engine comprising -
Automatic/Manual selctor switch &3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine
SYSTEM CONTROLLER
Designing. Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification. (Make- Star Enterprise, Fluid Energy System, Reputed)
-
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5C x 70 sq.mm YFY for main pump
40
468
18720
4C x 10 sq.mm YFY for Jockey Pump
20
269
5380
10C x 1.5 sq.mm YFY for Diesel Pump
20
311
6220
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
(Make- Polycab, Mescab)
80
173
13840
Providing and fixing 25 mm X 5 mm GI strip on surface or in recess for connections etc. as required.
(Make- Polycab, Mescab)
40
244
9760
25 Sq.mm single core multistrand copper cable shall be run on floor / ceiling / walls, from the nearest earth bar to the pump control panel with necessary accessories as required. (Make- Polycab, Mescab)
40
795
31800
Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required.
(Make- H. GURU / FIEBIG / PRICOL)
5
1196
5980
Providing and fixing of pressure switch in M.S. pipe line including connection etc. as required. (Make- INDFOS / SWITZER / DENFOS)
5
1546
7730
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/1S 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
150 mm NB
42
3574
150108
100 mm NB
12
2555
30660
80 mm NB
12
1885
22620
65 mm NB
6
1614
9684
50 mm NB
12
1281
15372
25 mm NB (Make-TATA,JINDAL)
12
744
8928
Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of floolwing sizes as required :
Size 150 mm NB
1
22762
22762
Size 100 mm NB
3
14641
43923
Size 65 mm NB (Make-H.SARKAR / KARTAR / KOLEY)
1
9236
9236
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS : 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required : Size 100 mm NB
3
11050
33150
Size 65 mm NB
1
6418
6418
Size 50 mm NB
(Make-H.SARKAR / KARTAR / KOLEY)
4
5790
23160
Supplying, fixing, testing & commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of floolwing sizes as required : Size 150 mm NB
1
8960
8960
Supply, installation, testing & commissioning of CI Globe Valve as per IS:9338 (PN10 rating) with matching flanges, bolts, nuts and gaskets. Size 80 mm NB
1
12000
12000
Size 50 mm NB (Make-ITAP / LEADER / ZOLOTO)
5
8000
40000
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as regd. for suitable dia MS pipe connection conforming to IS 904 as required:
4 way - 150 mm dia M.S. Pipe
(Make-NEWAGE / FIRESHIELD/ SAFEX )
1
13974
13974
Supply & installation of 150NB GM / SS Fire Brigade Draw out connection with necessary foot valve with strainer.
(Make-NEWAGE / FIRESHIELD/ SAFEX )
1
11500
11500
Supply,Installation, testing & commisssioning of CI Foot valve with Strainer Size 100 mm NB
3
12000
36000
Size 80 mm NB
(Make-H.SARKAR / KARTAR / KOLEY)
1
9000
9000
Supply, installation & commisoning of Level switches, with controller of suitable range for pump sets along with ball valves and other accessories.
4
13186
52744
Priming arrangement of 500ltrs capacity for negative suction to be provided by the erection vendor including necessary tank and other structural support. Valves required are indicated elsewhere.
1
11800
11800
B. HYDRANT SYSTEM
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.
Size 150 mm NB (Make-TATA,JINDAL)
12
3804
45648
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/1S 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : Size 150 mm NB
300
3574
1072200
Size 100 mm NB
108
2555
275940
Size 80 mm NB
18
1885
33930
Size 25 mm NB
(Make-TATA,JINDAL)
18
744
13392
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS : 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required : Size 150 mm NB
2
17786
35572
Size 100 mm NB (Make-H.SARKAR / KARTAR / KOLEY)
3
11050
33150
Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of floolwing sizes as required :Size 150 mm NB (Make-H.SARKAR / KARTAR / KOLEY)
5
22762
113810
Supplying, fixing, testing & commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of floolwing sizes as required :150 mm NB
1
8960
8960
100 mm NB
(Make-H.SARKAR / KARTAR / KOLEY)
5
6667
33335
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required:
Single headed Stainless steel (Make-NEWAGE / FIRESHIELD/ SAFEX )
7
6139
42973
Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required:
Single headed Stainless steel (Make-NEWAGE / FIRESHIELD/ SAFEX)
5
6139
30695
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required:
Stainless Steel (Grade 304)
(Make-NEWAGE / FIRESHIELD/ SAFEX )
12
1662
19944
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required:
Stainless Steel (Grade 304)
(Make-NEWAGE / FIRESHIELD/ SAFEX )
24
4448
106752
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.
20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585
20 mm nominal internal dia gun metal globe valve & nozzle.
Drum and brackets for fixing the equipmets on wall.
Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30M (Make-NEWAGE / FIRESHIELD/ SAFEX )
5
8675
43375
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as regd. for suitable dia MS pipe connection conforming to IS 904 as required:
3 way - 150 mm dia M.S. Pipe (Make-NEWAGE / FIRESHIELD/ SAFEX )
1
9455
9455
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as regd. for suitable dia MS pipe connection conforming to IS 904 as required:
2 way - 100 mm dia M.S. Pipe
(Make-NEWAGE / FIRESHIELD/ SAFEX )
2
6742
13484
Supply and installation of Globe Valves in Bronze Construction to IS: 778 with screwed ends 25 NB size
(Make-ITAP / LEADER / ZOLOTO)
7
4000
28000
Supply, installation of automatic 25 NB Air Release Valve
(Make-ITAP / LEADER / ZOLOTO)
2
4000
8000
Supply & installation of hose box, fabricated from 16 SWG CRCA sheet, double door with lockable arrangements to accommodate 2 RRL hose of 15 m length and one branch pipe painted white inside and red outside with one key. (750x600x250 mm).
(Make-NEWAGE / FIRESHIELD/ SAFEX )
12
5491
65892
Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required.
(Make- H. GURU / FIEBIG / PRICOL)
2
1196
2392
Supply and installation of 300NB Hume Pipe of NP3 class for underground pipes at road crossings.
(Make- REPUTED )
12
5329
63948
C. AUTOMATIC SPRINKLER SYSTEM.
Supply, erection and testing of heavy grade(class-C) pipes conforming to IS-1239 part-1 including all fittings viz. tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer and structural steels for pipe supports. Hanger support with anchor fasteners and clamps shall be supplied to fix the pipes on ceiling wall etc. including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. Cutting of floors, walls etc and making it good after erection of pipes shall be of vendor's scope. Necessary painting with 2 coats of primer and 2 coats of synthetic enamel paints to be done and supply of paints shall be with vendor's scope. 150 mm NB
114
3574
407436
100 mm NB
48
2555
122640
80 mm NB
48
1885
90480
65 mm NB
42
1614
67788
50 mm NB
36
1281
46116
40 mm NB
132
1034
136488
25 mm NB
600
744
446400
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :
Pendent type
(Make-HD FIRE,TYCO,VIKING)
305
553
168665
Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required. 150 NB
(Make-HD FIRE,TYCO,VIKING)
1
48202
48202
Supplying. installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as reuired. 1500mm (Make-NEWAGE,HD FIRE,TYCO,VIKING)
288
1833
527904
Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of floolwing sizes as required :
150 NB
(Make-H.SARKAR / KARTAR / KOLEY)
1
22762
22762
Supplying, fixing, testing & commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of floolwing sizes as required : 150 NB (Make-H.SARKAR / KARTAR / KOLEY)
3
8960
26880
Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required. (Make- H. GURU / FIEBIG / PRICOL )
1
1196
1196
Supply and installation of Globe Valves in Bronze Construction to IS: 778 with screwed ends.
40 mm NB
3
6000
18000
25 mm NB (Make-ITAP / LEADER / ZOLOTO)
1
4000
4000
Supply, installation of automatic 25 NB Air Release Valve (Make-ITAP / LEADER / ZOLOTO)
1
4000
4000
Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required.
(Make-NEWAGE,HD FIRE,TYCO,VIKING)
288
225
64800
D. PORTABLE EXTINGUISHERS
Supply & fixing of 5 Kg dry power extinguisher consisting of welded MS cylindrical body with discharge valve, nozzle & CO2 cartage and hanging arrangement complete conforming to IS:2171
(Make-MINIMAX / FIRESHIELD/ SAFEX )
16
3456
55296
Supply & fixing of 9 Litre Water type CO2 (ISI marked) extinguisher including all accessories with wall bracket & raw plug conforming to IS:940 (Make-MINIMAX / FIRESHIELD/ SAFEX )
16
3134
50144
Providing & fixing 9 Litre Foam type (ISI marked) extinguisher including all accessories with wall bracket & raw plug confirming to IS:10204
(Make-MINIMAX / FIRESHIELD/ SAFEX )
1
3710
3710
Supply & fixing of 6.8 Kg carbon-di-oxide fire extinguishers (ISI Marked) consisting of welded MS cylindrical body, squeeze, lever discharge valve, fitted with internal discharge tube, high pressure discharge hose, discharge nozzle, suspension bracket, finished externally with red enamel paint and fixed to wall with brackets with rawlplug/ dash fastners complete with internal charge conforming to IS:2878. (Make-MINIMAX / FIRESHIELD/ SAFEX )
3
9535
28605
E. SIGNAGES
Supply and installation in position the "FIRE EXIT" Sign with luminicent colour having size 300 x 100 mm.
(Make-MINIMAX / FIRESHIELD/ SAFEX )
14
942
13188
Supply and fixing in position the signages " FIRE ORDER" contain the following matter on 3 mm thick "Opaque" PVC foam board of computerised cut, PVC non-reflective self adhesive vinyle painted foam board of size 450 x 300 mm. a. ALERT THE SECURITY AT SECURITY ROOM BY ACTUATING MANUAL CALL POINT LOCATED AT STRATEGIC LOCATION.
b. EVACUATE THE OCCUPANTS BY USING FIRE EXIT AND EMERGENCY EXITS ONLY AND ASSEMBLE AT ASSEMBLY POINTS.
c. BE CALM AND DO NOT GET PANIC, WALK DO NOT RUN
d. IF POSSIBLE TRY TO EXTINGUISH FIRE BY USING NEAREST / SUITABLE PORTABLE EXTINGUISHER OR WATER FROM NEAREST WET RISER.
(Make-MINIMAX / FIRESHIELD/ SAFEX )
5
1770
8850
Supply and fixing signage with printed " IN CASE OF FIRE, DO NOT USE LIFT. USE STAIRS ONLY" OF 1.5 cm height letters in red with white background. The size of the board shall be 300 x 250 mm and shaall be fixed at the height of 2 mtrs.from finished floor near Manual Call Point.
(Make-MINIMAX / FIRESHIELD/ SAFEX )
5
2290
11450
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%