Public Works Department Tender

S&F 250V, SPN MCBDB (2+8) way with SS enclosure double-door (Ivory White with IP-42/43 protection with DP Isolators as incomer and SPMCBs ('C' Curve, 10kA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment as per GS. INCOMING-40 A DP MCB OUTGOING-08 Nos. 6-16A SPMCB (Make:Legrand) .

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish -- Average run 8 Mtr

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish -- On Board

Supplying & Fixing CRC sheet metal (16 SWG) JB-cum- Switch Board of 240 mm x 200 mm x 65 mm sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. bakelite/Perspex/coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works

Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 6A plug socket (Brand approved by EIC), without switch & plug top, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for plug by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc.

Supply & Delivery of 1.1 kv grade 4Cx50sqmm XLPE-armoured AL. cable, as directed by EIC. [Make - Polycab/Havells/RR Kabel/Gloster] (From Cut out to Main switch & from Main Switch to VTPN DB)

Supply and delivery of 1.1 kv grade 4 core 25 sq mm XLPE/PVC Ar Al cable, as per direction of EIC. [Make - Polycab/Havells/RR Kabel/Gloster] from VTPNDB to HTPNDB]

Laying of cable for 4Cx50sqmm XLPE-armoured AL. cable sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting as per GS

Laying on Pole with Clamps Fixing of Cable (4Cx50sqmm XLPE-armoured AL. cable) with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wirealong the length of O.H. pole incl. S & F MS pole clamps fabricated from 25 mm x 6 mm MS flat incl. painting

Laying of cable upto 3/4 core 25 sqmm (4 core 25 sq mm XLPE/PVC Ar Al cable) on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting as per GS [From VTPNDB to HTPNDB]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20 mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. a)2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

b)2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

c)2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC

d))2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4.0 sqmm) ECC (from HTPNDB to SPNDB)

Finising the end of above PVC insulated & unsheathed copper wire as per GS. a) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)

b) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm)

c)2 x 84/0.3 (6 sqmm) + 2 x 56/0.3 (4.0 sqmm)

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required (Power Plug)

Supply & Fixing 240 V, 4 nos. 20A plug socket with separate 4 nos. 20A Piano key type switch, indicator & 16A kit-kat flush type fuse (approved make) on sheet metal switch board embedded in wall incl. S & F 300x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required (Power Plug)

Supply & Fixing 240 V, 4 nos. 6A, plug socket with separate 4 nos. 6 A Piano key type switch, indicator & 16A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required (Seperate Plug)

Supplying & Fixing Industrial Plug & Socket board with 240 V, 20A, SPN & Earth Metal Industrial Plug socket & 20A Industrial top incl. S&F 20 A SP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection. (Industrial Socket)

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling.

Fixing only lamp

Supply and delivery of Single LED Fitting (18Watt, 230VAC, 50hZ, 4000K NW, THD10%, bult in 2.5KV SPD) with all accessories and 1 nos LED Tube, as directed by EIC. [Make: Philips Havells, Bajaj, CG, Wipro or as per EIC] (Luminous efficiency 105 & 120 Lumen/watt. The LED Luminaries & accessories shall have BEE certification)

Supply and delivery of Twin LED Fitting (18Watt, 230VAC, 50hZ, 4000K NW, THD10%, bult in 2.5KV SPD) with all accessories and 2 nos LED Tube, as directed by EIC. [Make: Philips Havells, Bajaj, CG, Wipro or as per EIC] (Luminous efficiency 105 & 120 Lumen/watt. The LED Luminaries & accessories shall have BEE certification)

Supply & Delivery of 220-240 V B22 9 Watt CDL/ 6500K LED Lamp (Make-Havells Cat no.LED ADORE PLUS 9W B22 CDL 3 STAR LAMP, Philips/Crmpton or as per EIC)

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc as per GS

Engraving the deptt. number with 10 mm lettering on the body as per GS.

Painting upto 10 letters of the engraved number with approved black /red paint as required as per GS

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: a) 23cm (9")

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) a) 23cm (9")

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: a) 30cm (12")

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) a) 30cm (12")

Supply & delivery of 1200 mm sweep 230 volt AC Ceiling fan incl. Blades, canopy etc. With 18" down rod(14SWG), Fork(10SWG), Heavy type insulator, 3/8th inch bolt with nut, heavy type split pin etc.with safety wire & PS2 type capacitor, as directed by EIC. [Make-Orient - Summer cool (1200 mm Metalic Bronze Copper) or similar spec of Crompton/Usha - Striker 1 Star (Safety Wire & S3/P2 Capacitor)]

Supply and delivery of 230V 230mm (9") Exhaust fan with all necessary accessories, as directed by EIC. [Make: EPC Heavy Duty, Usha, CG, Bajaj or equiv Make]

Supply and delivery of 230V 300mm (12") Exhaust fan with all necessary accessories, as directed by EIC. [Make: EPC Heavy Duty, Usha, CG, Bajaj or equiv Make]

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling.

Fixing only lamp

Supply & Delivery of 220-240 V B22 100 Watt GLS Bulb (Make-Philips/Havells/Crmpton or as per EIC)

Supply & Delivery of 220-240 V B22 200 Watt GLS Bulb (Make-Philips/Havells/Crmpton or as per EIC)

Fixing only outdoor / street light type fluorescent light fitting complete with all accessories to be fixed/projected from the wall of the building incl. making holes to building, S&F 40 mm dia GI pipe (ISI-Medium) 1.50 mts. average length, with GI socket at one end and thread at the other end & suitable bend to house the fitting & making necy. connections with S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall and painting

S&D of 230 V. 40-45 W. LED outdoor light fittings, made up of pressure die cast housing with toughened glass and high power LED's with secondary optics, of following specifications. i. IP66 protection ii. 10 KV SPD included iii. Efficacy ≥110/120 LPW.

Supply & delivery of 250V, 25W new generation energy saving and environmentally friendly long-life LED street light made up of pressure die-cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having the bottom Opening separate driver compartment with IP66 protection and impact resistance of IK08., as directed by EIC. [Make: Havells ENDURASUNDOWNSL25WLED765PASYBOPCIHD or equivalent spec of K-Lite/ Philips/ Crompton]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By TATA-Medium GI pipe.

Excavation of soil for installation of Earth Electrode and filling & ramming. (For Soft Soil)

Connecting the equipments to earth busbar including S & F Solid GI (Hot Dip) wire of size as below as per GS -- No.-4 SWG

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Supply, Delivery & installation of LED Sign Board (as per inscription given by the authority during the execution of work) of Size 20'x4' sq ft with front side 3mm thick A-1 quality ACP Blue colour (AD-41) board capable of preventing avoid wind pressure which is also to be attached to M.S. structure(front/back side of board of suitable size MS angle/ MS hollow square/rectangle bar by drilling hole incl. S&F special type steel nuts, bolts and washer). The matter of the LED sing board should be in English/Bengali alphabets made of laser cutting box type by white colour letter making in the shape of male/female incl. all fixing facility, from 3mm thick imported white acrylic sheet including jointing/setting the same part by part and fixing on the board by using chloroform/machine screw etc. is to be fixed on ACP board (on front) incl. S&F SMD module (Best Quality make) of required quantity for illumination of.(Male & Female) letters including necessary interconnection & SMPS. The matter will be as per requirement of competent authority and as per direction of EIC.(80 sqft *1nos of board), incl Erection of glow sign board on wall with 4 nos.L Shape Angle 8'long x 2" Width x 3mm thickness with nut,bolts etc. as directed by EIC.

Making necessary arrangement for fixing the above 60 Sq.Ft LED board by making necessary supporting structure to resist storm by S&F of 50mmx50mmx5mm M.S. angle incl.making 6nos CC (6:3:1) base block (around the MS angle dimension 0.45x0.45x0.60 mt.above roof top, neatly cemented finish (3 mm thick), incl. all fixing accessories including providing necessary fixing materials as per drawing

Carrying charges for carrying of LED Sign board, fabricating materials, welding machine and other accessories included loading and unloading both the materials.

Charges for making heavy type scaffolding arrangement hiring materials and removing after work as required

Note: 1) All the above rates should be quoted inclusive of all taxes, duties and all ancilery charges with cost of maintenance, servicing, supply & replacement of spares for 1 (One) year from the date of commissioning. 2) Total is rounded off to the nearest rupees.