Public Works Department Tender

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. Pakur Variety

M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. Grill weighing above 16 Kg./sq.mtr and above

Supplying, fitting, fixing bolts with nuts, washers 10 to 16 mm dia: Length upto 75 mm / M-10x75 long

Painting with ready mixed red lead paint of approved make and brand : Two Coat

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc.including using of approved putty etc. on the surface, if necessary : On steel or other metal surface : (With super gloss, hi-gloss) Two Coats (White in shade )

Two Coats (Whit in shade except white )

Supplying & laying in the specified pattern of interlocking concrete block pavement (ICBP) with concrete blocks (with concrete grade as specified as per table 1 of IS : 15658 : 2006) manufactured from BIS licence manufacturar, with spacer nib (Small producing profiles on the verticle face of a paver block used as a device for keeping mimimum jount gap in between the paving blocks as per Cl. No. 3.26 of IS : 15658) and of specified size and shape with aspect ratio (the ration of length to thickness of paver block, as per Cl. No. 3.3 of IS : 15658) as per table 2 of IS : 15868 with flexural strength / breaking loan as per Annexure G of IS : 15868, on the prepared base course of specified CBR as per table 1 of IRC SP 63 (2018) or else as metioned in design & drawing with a cushion of compected bedding sand of 25-35 mm thick ( grading of bedding sand as per clause 6.5.1. of IRC SP-63) and filling up the gap in between paver blocks with joint filling sand (the grading of joint filling sand will be as per clause 6.5.2. of IRC SP 63) and completing the edge with cut blocks as per Cl. No. 8.7 of IRC SP - 63 (2018) with proper confinment of bedding and joint filling sand, compaction, levelling and filling up of the edge gap. 60 mm thick Coloured Decorative