Public Works Department Tender

Supplying and Laying in the specified pattern of Interlocking Concrete Block Pavements (ICBP) with concrete blocks (with concrete grade as specified as per Table 1 of IS 1568:2006) manufactured in steet mould clamped to a vibrating table by hydraulic pressure (as per cl. no. 6.30 of IRC :SP : 63 (2018), from BIS licensee manufacturer, with spacer nib (Small protruding profiles on the vertical face of a paver block used as a device for keeping minimum joint gap in between the paving blocks, as per Cl. No. 3.26 of IS: 15658) and of specified size and shape with aspect ratio (The ratio of length to thickness of a paver block, as per CL. No.3.3 of IS: I5658) as per Table 2 of IS :15658 with flexuruf strength/breaking load as per Annexure G of IS: 15658, on the prepared base course of specified CBR as per Table 1 of IRC SP 63 (2018) or else as mentioned in design and drawning with a cushion of compacted bedding sand of 25-35 mm thick (grading of the bedding sand us per clause 6.5.1 of IRC SP-63) and filling up the gaps in between paver blocks with joint filling sand (the grading of the joint filling sand will be as per clause 6.5.2 of IRC SP 63) and completing the edges with cut blocks as per Cl. No. 8.7 of IRC SP - 63 (2018) with proper confinement of bedding and joint filling sand, compaction, levelling and filling up of the edge gap. 80 mm thick. Grey

Goods and Services Tax(GST)@18%

Labour Welfare Cess(LWC)@1%