Public Health Engineering Department Tender

Single B.F.S. of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Artificial stone in floor, dado, staircase etc. with cement concrete (4:2:1) with stone chips laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (2:1) including smooth finishing and rounding of corners and including application of cement slurry before flooring works using cement @ 1.75 kg/sqm all complete including all materials and labour in ground floor 3 mm thick topping (High Polishing grinding on this item is not permitted )with ordinary cement.....A)     35 mm thick

Cement concrete with graded jhama khoa (30 mm size) excluding shuttering. In Ground floor. [Pakur Variety] In ground floor and foundation) 6:3:1 proportion & Plinth protection.

Brick work with 1st class bricks in cement mortar (1:6) a)       In foundation and plinth

b)      In Superstructure, ground floor

Supplying PVC water storage tank of approved quality with closed top with lead.Black (Multi layer) with hoisting 500 litre capacity

25 mm thick damp proof course with cement concrete with stonechips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2nd coat just before masonry work) as directed.

Ordinary Cement concrete (Mix 1:1.5:3) with graded stone chips (20mm size) excluding shuttering & reinforcement, if any , in ground floor as per relevant IS Code A) Pakur / chndil varity

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars stirrups, binders etc. including supply of rod , initial straightening & removal of loose rust (if necessary ), cutting to requisite length, hooking & bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.a) For works in foundation, basement and upto roof of ground floor / upto 4 Mtr. i) Tor steel / Mild steel. SAIL/TATA/RINL

Hire and labour charges for shuttering with centering & necessary staging upto 4 Mtr using approved. Stout props & thick hard wood planks of approved thickness with required bracing for concrete stabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. ( upto roof of ground floor) a)25mm to 30mm thick wooden shuttering as per dicision & direction of EIC

b) 25 to 30 mm shuttering without staging in foundation etc.

Plaster (to wall floor ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints, including throating, nosing and drip course, scaffolding /staging where necessary (Ground floor)….......i) with 6:1 cement mortar a) 15mm thick plaster

ii) with 4:1 cement mortar…......a)10 mm thick plaster

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of EIC.theIn Ground Floor (a)Two Coats

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.In Ground floor (Two Coat)a) Normal Acrylic Emulsion

125mm thick brick work with 1rt. class bricks in cement mortar (4:1) in ground floor using approved .

Supplying fitting and fixing in position approved P.V.C. door frame Mat finish made of extruded P.V.C. multi chambers hollow section having dimensions 60mm x50mm x 2mm (+0.2 mm) horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges one steel tube 40mm x 20mm x 1.20 mm will be inserted on one full vertical side of the frame(hinge side) as reinforcement, the frame will then be fixed in the opening with the help of PVC expandable fastener wooden gatties and galvanised and steel screws including cost of all materials and labour hire charges of tools and appliances, carriage of all materials taxes and all other incidental charges complete.

Supplying fitting and fixing PVC door shutter of approved quality and shade in position the style and rail of the PVC door shutter will be made of rigid PVC multi cavity hollow chamber of suitable size & section with 2.0mm wall thick -ness the section will have 2 nos built in beads horizontal and vertical section shall be fixed to each other by self tapping screws and 2 nos of solid plastic or MS tubular galvanized brackets of length 200mm x 80mm and other 100mm x 100mm both 120mm in each corner of the shutter frame for placing hinges polymer based multi cavity hollow section of 105 mm x 37 mm with 2.0 m wall mm thick- ness will be fitted in the middle as lock rail with aluminium cleat & steel screws as lock rail, the section frame will then be fitted in by polymer based panel of suitable size and 2 no of 6mm dia bright rod will be inserted horizontally with both side check & nut system &stretches where fixing of hinges/ hasp bolt / tower bolt/door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of 100 mm anodised aluminium hinges and cost of all materials and labour hiring of tools and plants & appliances. Carriage of all materials and all other incidental charges complete.(Width of shutter ranging from 0.60 mtr to 1.20 mtr and height ranging from 1.83 mtr to 2.10 mtr) a) 37 mm thick

Supply, fitting and fixing Orrisa Pattern water closet in white glazed vitreous chinawre of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing) (i) 530 mm X 410 mm

Construction of Septic tank of different capacities as per approved drawing awith 1st class brick work in cement mortar (4:1) including two 560 mm. dia. R.C.C. manhole cover of approved make supplied , fitted and fixed in the 100 mm thick R.C.C. (1:1.5:3) top slab with necessary fittings, 20 mm. thick cement plaster (4:1) with neat cement finish tot he internal surfaces and 15 mm. thick cement plaster (4:1) to outside wall upto 200 mm. below G.L. floor finished with 25 mm. thick grey artificial stone 100 mm thick R.C.C. (1:1.5:3) bottem slab including supplying, fitting and fixing all necessary specials, fittings, S.W. tees, C.I. foot rest etc. including excavating earth in all sorts of soil, shoring, bailing and pumping out water as necessary, ramming,dressing the bed and refilling the sides of the tank with earth,removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes,joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 5% by weight of cement, complete in all respect as per direction of E.I.C. .....For 10 users. With Pakur Variety

Construction of circular soak well 2.5 meter deep in all types of sandy soils with dry brick work upto 1.6 meter from the bottom having 150 mm intermediate cement brick work (4:1) band all round and cement brick work ((1:4) upto 0.90 meter from top 0.9mm thick cement plastering(1:4)to inside face upto the depth of cement brickwork 15 mm thick cement plaster (1:4)on outer face from top of the well upto G.L. & 15mm thick cement plaster (1.4) on top of the RCC cover slab including filling bottom 1.00mnm meter of inside of the well with theme metal(50mm to 63mm size) including RCC (over slab of 100 mm thick with cement concrete(1:1.5:3)with stone chips with necessary reinforcement and shuttering including one 560 mm dia RCC manhole cover (neavy type)of approved make supplied fitted and fixed in the cover slab with necessary fittings making necessary arrangements for pipe connections excavation of well including shoring dewatering and removing the excess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250mm thick dry brick work and 250mm thick cement brick work (6:1)and 1.00m inside dia.

Neat cement punning about 1.5 mm thick in wall, dado, window, sills, floor, drain etc….......(Cement 0.152 cum per 100 sq.m.)

Supplying fitting and fixing G.I Pipes of I.S.I. make with all necessary accessories specials viz socket bend tee union cross elbo nipple longs crew reducing socket reducing tee short piece etc. fitted with holder bats clamps including cutting piped making threads fitting fixing etc complete in all respect including cost of all necessary fittings as required jointing materials and two coats of painting with approved paint in any position above ground (Payment will be made on the center line measurment of total pipe line including all specials . No separate payment will be made for accessories specials). a)       15mm dia medium quality:

b)      20mm dia medium quality

Supplying fitting and fixing alloy iron with brass spindle bib cock/ stop cock approved band and make spray painted and tested to 21 kg per sq cm 15 mm dia

Supplying fitting & fixing UPVC pipes A type and fittings conforming to IS : 13592-1992 with all necessary clamps nails including making holes in walls, floor etc. and cutting trenches in any soil, through masonry concrete structures etc. if necessary and mending good damages including jointing materials (span yark, valamoid bitumen/M.Seal etc.) complete.......................i) 110 mm dia.

ii) 110 mm dia Bend 87.5 degree

iii) 110 mm dia Shoe

iv) 75 mm dia.

v) 75 mm dia Bend 87.5 degree

vi) 75 mm dia Shoe

Supplying fitting fixing cum - Metal wheel - valve of approved brand & make tested 21 K.G. / Sqm (for water line only)…........................20 mm

Add GST @ 18%

Add Cess @ 1%