Public Health Engineering Department Tender

Making internal wiring/electrification of the chlorine room by ( 1.5sqmm X 2 + 1.5mm. X 1 ECC) single core PVC insulated multistrand FR Grade flexible Cu. wire through 20 mm dia rigid PVC conduit pipe by supplying one 240/415 V, 16 Amp DP MCB of Breaking capacity 10kA & C characteristics with MCB SS enclosure with IP-20/30 protection, PVC Board & piano key type switch. (avg. run 5 mtr)- 18watt wall mounted LED Batten- 3 nos, 9W LED lamp-2 nos, 36 W LED luminarie (BRP 046) OR equivalent and same techinal specification, 5pin 5Amp Plug point, 240V 48"(1200mm) sweep BEE 3 star rating(minimum) AC ceiling fan with electronic step regulator-1 no., Two no Exhaust fan point (Total point 7nos. with one plug point) including drawing power by suitable gauge Cu.wire from panel board to DP MCB as per direction of EIC (fittings should be of Philips make & rising should be with continuous earthing arrangement)

Excavation of soil for installation of Earth Electrode and filling & ramming for soft soil

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1x4 SWG GI (Hot Dip) wire (4 Mts. long), 13mm dia x 80 mm long GI bolts, double nuts, double washer sincl. S & F 15 mm dia GI pipeprotection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: A) By ISI-Medium GI pipe.

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.

Extra for treatment of soil by using salt & charcoal or coke for pipe electrode.

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of Solid GI wire (8 SWG) on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.

Supply and Delivery at site Moulded Table. Make : Supreme ( Model- Arjun)/Nilkamal ( Model – Marvel)/Any other make approved by EIC

Supply and Delivery at site Moulded Chair. Make : Supreme ( Model- Dream)/Make : Nilkamal (Model – HR-4002)/Any other make approved by EIC.

Trial operation, maintenance of the entire system by engaging 2 nos operating personnel for 15 (Fifteen) days. (Rs. 465/- + 8.33% bonus)/day as on the day of operation including bonus.)

Providing outdoor illumination arrangement like suitable poles, cable, wire, MCB DB, LED outdoor fixture and other peripherals all complete as per NIeT specification.

Add GST @ 18%

Add Cess @ 1%