Eastern Railway Tender

"Providing and laying Russed Brown colour tiles (as per approved pattern 20 mm 4 nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete "

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m 4.17 16.00 Sqm 681.65 10906.40 (-) 7.00 10142.95

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. 6.5 19.00 cum 142.00 2698.00 (-) 7.00 2509.14 5

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except 6 burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The 7 laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with local sand, with common burnt clay non modular bricks.

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 10 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams.

Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge

Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer- in-charge.

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne 16 capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. 17

Providing and fixing 100 mm sand cast Iron grating for gully trap.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 21.18 16.00 Sqm 4540.70 72651.20 (-) 7.00 67565.62

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended 20 proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). 26.72 17.00 Sqm 757.00 12869.00 (-) 7.00 11968.17

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 26.35.3 7.00 Kg 793.25 5552.75 (-) 7.00 5164.06

1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 27

Cement mortar 1:4 (1 cement : 4 coarse sand) 7.38.1.1 600.00 Sqm 2675.70 1605420.00 (-) 7.00 1493040.60 28

HORTICUTURE AND LANDSCAPING // Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).

HORTICUTURE AND LANDSCAPING // Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : // Screened through sieve of I.S. designation 20 mm

HORTICUTURE AND LANDSCAPING // Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : // Screened through sieve of I.S. designation 4.75 mm

HORTICUTURE AND LANDSCAPING // Grassing with selection No. 1 / Doob grass 4 including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately). // In rows 5 cm apart in both directions

HORTICUTURE AND LANDSCAPING // Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of 5 stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) // Holes 1.2 m dia and 1.2 m deep

HORTICUTURE AND LANDSCAPING // Edging with bricks laid dry length wise, 6 including required excavation, refilling, consolidating with hand packing and spreading surplus earth neatly within a lead of 50 m : // Common burnt clay F.P.S (non modular) bricks of Class designation 7.5

HORTICUTURE AND LANDSCAPING // Providing & laying Selection no. 1 doob grass 7 turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and then rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly,as per direction of officer in charge

HORTICUTURE AND LANDSCAPING // Complete maintenance of the entire garden features having as per yardstick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing,weeding, pruning, replacement of plants, gap filling, 8 watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge. // Open spaces(1Mali for 3.00Acre).

HORTICUTURE AND LANDSCAPING // Providing and wartering of irrigation water 9 through water tanker of Horticulture features i.e. lawn, tree, shrubs, hedge/edge, ground cover etc. at the site of work. Water tanker having 5000 lit. capacity with one labour for watering i/c cost of water, filling of tanker, wartering at site with all leads and lifts as per direction of officer-in-charge.

HORTICUTURE AND LANDSCAPING // Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material's as per direction of officer in charge (excluding cost of plant & water) // Shrubs Plant

FOLIAGE AND SHADE LOVING PLANTS // Providing and displaying of Araucaria cookie having ht. 75 cm to 90 cm, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.

FOLIAGE AND SHADE LOVING PLANTS // Providing and displaying of Areca Palm having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.

FOLIAGE AND SHADE LOVING PLANTS // Providing and displaying of Raphis palm having ht. 75 cm to 90 cm with 12 to 15 equal suckers, well developed, full of fresh & healthy leaves from bottom to top in 25 cm size Earthen pot/Plastic pot & as per direction of the officer-in-charge.

ORNAMENTAL PLANTS // Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.

ORNAMENTAL PLANTS // Providing and Displaying Cycus revoluta specimen , having 45 to 50 fresh and healthy, leaves having 30cm to 35cm Circumference of base stem well developed in 40 cm challi, as per direction of the officer-in-charge.

ORNAMENTAL PLANTS // Providing and Displaying Cyprus Golden Conical Shape 150 to 165 cm ht., with fresh and healthy Golden colour foliage in 35cm Cement Pot as per direction of the officer-in-charge.

ORNAMENTAL PLANTS // Providing and Displaying Ficus Starlight with fresh, healthy and attractive foliage 45 to 60 cm spread 75 to 90 cm ht., specimen bushy ,in 35 cm Cement Pot as per direction of the officer-in-charge.

ORNAMENTAL PLANTS // Providing and Displaying Foxtail palm well developed with fresh & healthy foliage of ht. 210 to 240 cm in big 40 cm Cement Pot as per direction of the officer-in- charge.

ORNAMENTAL PLANTS // Providing and Displaying Topiary of Ficus Panda well developed with fresh & healthy foliage with 3 to 4 Ball and 60 to 75 cm spread each Ball, 135 to 150 cm ht., in 35 cm Cement Tray /Cement Pot as per direction of the officer-in-charge.

GROUND COVERS PLANTS // Providing and stacking of Clerodendrum inerme of ht. 20 cm to 30 cm multi branched in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.

TREE PLANTS // Providing and stacking of Ficus benjamina (green) of height 120-135 cm. with 6-8 branches and lush green foliage in g. bags of size 25 cm as per direction of the officer- in-charge.

TREE PLANTS // Providing and stacking of Plumeria alba of height 165-180 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.

TREE PLANTS // Providing and stacking of Plumeria rubra of height 120-150 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.

TREE PLANTS // Providing and stacking of Polyalthia longifolia (Ashok) of height 150- 165 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.

TREE PLANTS // Providing and stacking of Bombax ceiba of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

SHRUBS // Providing and stacking of Chandni dwarf of height 15-20 cm., well branched in earthen pots of size 20 cm as per direction of the officer-in-charge.

SHRUBS // Providing and stacking of Ficus blackii (F.vivion) (bushy) of height 150-165 cm. with 8-10 branches and healthy foliage in earthen pots of size 30 cm as per direction of the officer-in-charge.

SHRUBS // Providing and stacking of Hamelia patens of height 60-75 cm. with 6-8 branches in poly bags of size 25 cm as per direction of the officer-in-charge.

SHRUBS // Providing and stacking of Hibiscus rosasinensis of height 60-75 cm. with 5- 6 branches in p.bag of size 25 cm as per direction of the officer-in-charge.

SHRUBS // Providing and stacking of Hibiscus variegated of height 60-75 cm. with 8- 10 branches and healthy variegated foliage in cement pots of size 35 cm as per direction of the officer-in-charge.

SHRUBS // Providing and stacking of Tecoma gaudichaudi of height 60-75 cm. with 5- 6 branches in p.bag of size 25 cm as per direction of the officer-in-charge.

HORTICUTURE AND LANDSCAPING // Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material's as per direction of officer in charge (excluding cost of plant & water) // Hedge Plant /Ground cover

HORTICUTURE AND LANDSCAPING // Pruning, trimming, shaping of trees /shrubs (ht 15 feet and above) i/c removal of cut materials upto 50mt. Lead, as per direction of officer in charge. T&P shall be arranged by the contractor.

FOLIAGE AND SHADE LOVING PLANTS // Providing and displaying of Croton Petra Bangalore variety having ht. 60 cm to 75 cm with 4 to 6 branches, well developed, fresh and healthy colorful leaves in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.

"Providing and fixing full height wooden partitions wall with partly glass and partly with plywood on both faces and made up of Frame work of size 50X50X1.60mm thick aluminum section weight Not less than 0.836kg/rmt , the spacing of the alluminium frame members would be maximum of 450mm c/c bothways (Horizontal/Vertical) or as directed Architect and Engineer in Charge. The frame to be fixed on floor and ceilling roof with 65 to 75mm long screw. The lower and upper panel should be provided with 9.00 mm thick exterior grade Post -lamination ply (IS 710 Grade)/HDF Board to be fixed over the frame work on bothside. Architect and Engineer in Charge 1 approved make on both sides finished. The middle panel shall be provided 10 mm thick toughened glass . (The finishing of the partion wall would be done by using laminates/Veeners duly polished and the payment would be made seperately through seperate items). Rate inclusive of material, transportation, loading/unloading labor,tools Fitting and fixing etc.for all heights complete in all respects. The site Work approved by Architect and Engineer in Charge at site. The work shall be measured base on area of front elevation . Rates include all materials, labor, transportation, delivery, completion of work in all respect and placement at site. Works approved by Architects and Engineers In charge. (Ply- Green Panel, Century, Ambay, Hardware, Locks, Telescopic Drawer Slides: Hettich, Haffele,Ebco,Godrej, Screws, Nuts & Bolts Omni, Ebco, Hettich, Hepco and toughened Glass - Saint gobain, Modi or Equivalent Make). "

"Providing and fixing double skin full wooden partitions wall made up of Frame work to be 50X50X1.60mm thick aluminum section weight not less than 0.836kg/rmt with maximum distance of 450mm c/c bothways (Horizontal/Vertical) or as directed Architect and Engineer in Charge. The frame work to be fixed on floor and ceilling by 65 mm to 75 mm screws. The full panel should be provided with 9.00 mm thick exterior grade Post -lamination ply (IS 710 Grade)/HDF to be fixed over the frame work on bothside. (The finishing of the partion wall would be done by using laminates/Veeners duly polshed and the payment would be made seperately through seperate items).Architect and Engineer in Charge approved make on both sides finished. Rate inclusive of material, transportation, loading/unloading labor,tools Fitting and fixing etc.for all heights complete in all respects. The site Work approved by Architect and Engineer in Charge at site. The work shall be measured base on area of front elevation . Rates include all materials, labor, transportation, delivery, completion of work in all respect and placement at site. Works approved by Architects and Engineers In charge. (Ply- Green Panel, Century, Ambay, Hardware: Hettich, Haffele,Ebco,Godrej, Screws, Nuts & Bolts Omni, Ebco, Hettich, Hepco or Equivalent Make). (The materials/ products to be used in the instant item should have GreenPro Certification and qualifies as green product those are available in the directory of Green Pro certified product, materials and technologies issued by CII and to be approved by Engineer in charge) "

"Providing and fixing of frameless glass partition wall with or Without door glazing consisting of 12 mm clear toughened glass ( Saint gobain/ Modi or Equivalent make) and fixing with Dorma/Ozone/ Archies make with all necessary fittings upto all height including scaffolding all complete as per the direction of Atrchtect and Engineer-in-charge also The work shall be measured 3 base on area of front elevation . The work shall be measured base on area of front elevation. Rates include all materials, labor, transportation, delivery, completion finish of work in all respect and placement at site. Works approved by Architects and Engineers In charge. (The materials/ products to be used in the instant item should have GreenPro Certification and qualifies as green product those are available in the directory of GreenPro certified product, materials and tecnologies issued by CII and to be approved by Engineer in charge)"

"Supply , fitting and fixing 4 mm Thk. veneer of approved brand and colour . The work shall be measured base on area . The rate to include all materials, labour, transport, delivered and 4 placed in position at site work approved by Architect and Engineer in Charge. The work shall be measured base on area. Rates include all materials, labor, transportation, delivery, completion of work in all respect and placement at site. Works approved by Architects and Engineers In charge. (Make Veneer - Green, century , Natural or Equivalent Make). "

"Supply , fitting and fixing 3 mm veneer of approved brand and colour . The work shall be measured base on area . The rate to include all materials, labour, transport, delivered and placed 5 in position at site work approved by Architect and Engineer in Charge. The work shall be measured base on area. Rates include all materials, labor, transportation, delivery, completion finish of work in all respect and placement at site. Works approved by Architects and Engineers In charge. (Veneer - Green, century , Natural or Equivalent Make). "

"Supply , fitting and fixing 1.00 mm Thk. Laminate of approved brand and colour. The work shall be measured base on area . The rate to include all materials, labour, transport, delivered 6 and placed in position at site work approved by Architect and Engineer in Charge. The work shall be measured base on area. Rates include all materials, labor, transportation, delivery, completion finish of work in all respect and placement at site. Works approved by Architects and Engineers In charge. (Laminate - Green, century , Royal Touch or Equivalent Make). "

"Supply , fitting and fixing 0.8 mm Thk. Laminate of approved brand and colour. The work shall be measured base on area . The rate to include all materials, labour, transport, delivered 7 and placed in position at site work approved by Architect and Engineer in Charge. The work shall be measured base on area. Rates include all materials, labor, transportation, delivery, completion finish of work in all respect and placement at site. Works approved by Architects and Engineers In charge. (Laminate - Green, century , Royal Touch or Equivalent Make). "

"Providing and applying French Chalk polish on veneer surface and wooden surface. 8 The work shall be measured base on applied area . The work shall be measured base on area. Rates include all materials, labor, transportation, delivery, completion finish of work in all respect and placement at site. Works approved by Architects and Engineers In charge. "

"Providing and applying French Chalk polish on wooden Bit. The work shall be 9 measured base on area . The work shall be measured base on Running Metre. Rates include all materials, labor, transportation, delivery, completion finish of work in all respect and placement at site. Works approved by Architects and Engineers In charge."

"Providing and applying Melamine Polish on veneer surface and wooden surface. Thework shall be measured base on area. Rates include all materials, labor, transportation, delivery, completion finish of work in all respect and placement at site. Works approved by Architects and Engineers In charge. "

"Providing and applying Poly urethane (mechanically spray PU polishing) on veneer 11 surface and wooden surface. The work shall be measured base on area . The work shall be measured base on area. Rates include all materials, labor, transportation, delivery, completion finish of work in all respect and placement at site. Works approved by Architects and Engineers In charge."

"Providing and fixing of Extrior Grade 4.00 mm Thickness sheet . ACP cladding ( ACP cladding Make: Aludecor, Pratap, Reynobond, Viva, Alstone and Aluminium Section : Hindalco or Equivalent) as shown in drawing. ACP shall be FR-B1 grade. ACP panels shall mechanically fixed on Aluminium structure with necessary fixing arrangement shown in Tender drawings. Joint of ACP to be 12 filled with non staining silicon sealant Rate shall include of aluminium frame work, Alum./MS brackets, SS screws, SS nut bolts etc. complete with necessary fitting and fixtures. MS brackets shall be finished with two coats of synthetic enamel paint of approved shade over one coat of zinc chromate primer.The work shall be measured base on area of finish . The work shall be measured base on area of surface area . Rates to include all materials, labour, transport, delivered, completion finish of work in all respect and placement at site. Works approved by Architects and Engineers In charge. "

Providing and fixing of wallpaper / Graphic for highlighting the walls with proper adhesive in line level for where ever required as per the drawings. Make - (international Grade Paper) 13 at wall, partition, falseceilling etc. as advised by Architect and Enginner in Chgarge. (Wallpaper - Asian Paints, D'decor, LG or Equivalent Make). The work shall be measured base on area of surface area . Rates to include all materials, labour, transport, delivered, completion finish of work in all respect and placement at site. Works approved by Architects and Engineers In charge.

"Providing and fixing in the true horizontal level Grid false ceiling system of mineral Fibre Ceiling tiles (Make : Saintgobain, Gypsum India, Gyprock or Equivalent . The suspension system shall be the 'Trulock Silhouette' revealed profile grid system with 15mm wide flanges incorporating a 3mm or 6mm central recess color black or white revealed Silhouette main runners and cross tees to have mitered ends with birds mouth Notches to provide mitered cruciform junctions. Main runners to be spaced at 12mm c/c fixed by using 2mm pre straightened GI Wire.Main tee,rotary stitched of size 15mm x44mmx3600mm at every 1200mm c/c maximum and 1200mm cross tee of size 15mmx44mm x1200mm at every 600 mm c/c maximum and 600mm c/c cross tee of size 15mmx44mmx600mm at every 1200mm c/c. The tiles should have Humidity Resistance (RH ) of 90% - 99%, Colour White, in module size of 600 x 600 x 16mm, suitable for Green Building 14 application(Dune Supreme / Dune Of Armstrong Make - Radar Climaplus / Pin Perf Climaplus Of Usg Boral / Celotex Pin / Celotex Fine Fissured Of Gyproc). The work includes cost and conveyance of materials and labour charges includings. All Operational charges tools lifts and all heights etc. surfaces of the false ceiling should be with drop ceiling.Manufactures specifications to be strictly followed. No extra shall be payable for making cutouts and providing frame for cutouts of for making staggred ceiling. making complete as per the design. The rate shall be inclusive of all the necessary material,required hardware, labour, transportation, necessary for the complete execution of the item. The work shall be measured base on area of sarface area of ceiling. Rates to include all materials, labour, transport, delivered, completion finish of work in all respect and placement at site. Works approved by Architects and Engineers In charge.(The materials/ products to be used in the instant item should have GreenPro Certification and qualifies as green product those are available in the directory of GreenPro certified product, materials and technologies issued by CII and to be approved by Engineer in charge)"

"Wall Paneling on brick wall with 9 mm thick IS 710of approved make. All inside frame shall be made of aluminum member's size of 25mmx 25mmx 1.2mm thick section at maximum 2'-0"" c/c. including all necessary hardware fittings. All other finishes shall be done as per detail drawings 15 and as per direction of Architect and Engineer in Charge.. (The finishing of the panelling would be done by using laminates/Veeners duly polished and the payment would be made seperately through seperate items). The rate to include all materials, labour, transport, etc complete. The work shall be measured base on area of all elevation. Rates to include all materials, labour, transport, , delivered completion finish of work in all respect and placed in position at site of work approved by Architect and Engineer in Charge. (Ply- Green Panel, Century , Ambay or Equivalent Make). "

"Providing and fixing in position Roller, horizontal, vertical blinds. With imported fittings heavy duty powder coated of approved colour including aluminium top channels, chord, locks, painted Tilt rod etc. completed. item design select by Atrchtect and Engineer-in-charge also work approved by Architect and Engineer in Charge. The work shall be measured base on area of elevation. The rate to include all materials, labour, transport, etc complete. The work shall be measured base on area of all elevation. Rates to include all materials, labour, transport, , delivered, completion finish of work in all respect and placed in position at site of work approved by Architect and Engineer in Charge."

"Supplying fitting and fixing heavy duty Curtain with Rod SS 303 with decorative head. Rates to include all materials, labour, transport, delivered, completion finish of work in all respect and placed in position at site of work approved by Architect and Engineer in Charge. "

Providing & Fixing 84R Plain Panel Aluminium Sun Louver System of approved make and single side colour as per Exterior colour chart. The system shall consist of Panel 84mm wide x l6mm deep x 0.5mm thick in standard length of I M to 4M.The panels shall be coil coated on a 18 continuous point line, double baked & roll formed from Corrosion Resistant Aluminium Alloy AA3O05 for higher strength & roll forming characteristics. The panel shall be clipped on to o baked & enamelled V5 stringer 33mm wide 48mm deep & manufactured from 0.95mm thick MS profile in Black color with cutouts to hold the ponels in module of l00mm clc. The first stringer sholl be fixed of 150mm from both ends & thereafter at 1000mm c/c depending on wind load. The stringer sholl be fixed to a suitable MS substructure with Nut/Bolt & Washer.