North Eastern Railway Tender

Supply and recessing/fixing on surface of 6 SWG GI wire confirming to IS: 280/2006 (latest version) for earthing as required for earthing of installation as per IE Rule.

Supply and Erection of white finished mounting single mounting cover plate with base frame 12 modules suitable for mounting of modular type piano switches/plug socket, fan regulator and connecting to wiring complete in all respect.

Design Manufactucturing Supply of L.T. Switch board panel with for provision of consisting with installation, connecting, testing and commissioning LT. switch board panel of cubical type as per CPWD General specification for electrical works, Part- IV substation 2013 including made of 2.0 mm. thick CRCA sheet of suitable size with provision of water proof, hinged door, suitable locking arrangements, proper hole in the bottom for cable entry (incoming & out going cables), 05no. suitable MS channel of size should be fixed across the panel for grouting on the foundation, earthing terminals and panel shall be powder coated (paint) greenish grey shade with proper arrangement of protection against rain/water & including sub copper bus bar, CTs & others accessories consisting with the following accessories with Supply fixing connecting testing & commissioning of Incoming ACB 800 Amps, 04 poles complete in all respect, braking capacity 50 kA suitable for 415 volts, 50 Hz AC supply-01 No, Supply fixing connecting testing commissioning of Main copper Bus Bar TPN 800 Amp.-02 Sets with Supply fixing connecting testing commissioning of LED Multifunction Meter, accuracy class 1 with RS485. Input voltage measurement range 170-520 VAC. Aux supply 90-300 VAC. flush mounted 96 x 96 mm. Parameters Model A V, A, F, PF. KW, KVA, KVAR. KWh, kVAh, kVARh. Runhours. On hours, Intrrupts, RPM. %Unbalance (VA) Phase angle, THD -13 Set with Supply fixing connecting testing & commissioning of On load Manual Change witch 250 Amps. 04 pole, site convertible fuse version for open execution, site convertible dual shaft position, staggered terminals., 415 volts, 50 Hz. complete with all respect-1 No, Supply fixing connecting testing commissioning of Indicating lamps for incoming & outgoing feeders-18 Nos, Supply fixing connecting testing commissioning of Outgoing MCCB 200 Amps, 04 poles, braking capacity 36/35 kA. Conforms to IS/IEC 60947-2 adjustable overload setting suitable for 415 volts, 50 Hz, AC supply-02 Nos, Supply fixing connecting testing commissioning Outgoing MCCB 100 Amps. 04 poles. braking capacity 25 kA. Confirming to IS/IEC 60947-2. Adjustable overload setting suitable for 415 Volts, 50 Hz. AC supply-04 Nos, Supply fixing connecting testing commissioning Outgoing MCCB 63 Amps. 04 poles. braking capacity 18 kA. Confirming to IS/IEC 60947-2. Adjustable overload setting suitable for 415 Volts, 50 Hz. AC supply-06 Nos and Supply fixing connecting testing commissioning of providing of sub copper bus bar for connecting MCCBs for outgoing feeders with suitable size of copper lugs and cable will be connected aluminum lugs through cable glands etc as required complete in all respect as per direction of engineer- incharge at site. Note:-ALL ACB, MCCBs/Change Over Switch should be reputed Make.