Indian Institute Of Technology Tender

View complete overview of Uttarakhand IIT Tender

Indian Institute Of Technology - IIT Tender

Works

Civil And Construction

Building Construction

Eprocure

Haridwar, Uttarakhand

Opening Date21 Jun 2024

Closing Date15 Jul 2024

Tender Amount₹ 50,00,000

Notes

Download

Costs

EMD
₹ 1,00,000
Document Cost
₹ 1,180
Tender Fee
Refer Documents

Description

Unlock the Tender details for free

Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Tender Id
2024_IITR_812725_9
Bid Award Id
View
Tender No
IWD/IE/E Tender/40 Dated June 12 ,2024
Tender Authority
Indian Institute Of Technology View
Purchaser Address
-
Website
http://https://www.iitr.ac.in

Unlock the Tender details for free

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

Request Call Back

Documents

Download All

Tender Notice-2199.5 kBNIT.pdf

NIT

Tender Notice-1180.9 kBTendernotice_1.pdf

NIT.

BOQ-1886.8 kBBOQ_854162.xls

BOQ

Document-23.6 MBTender_51.pdf

Tender document

Document-151.8 kBTender_Detail_2024...Tender_Detail_2024_IITR_812725_9.html

Report Missing Document

BOQ Items

DO_NOT_SHOW

Quantity-

Rate-

Amount -

View all details for FREE

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Quantity8

Rate16990

Amount 2123.75

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.

Quantity-

Rate-

Amount -

All kinds of soil

Quantity120

Rate4098

Amount 34.15

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:

Quantity-

Rate-

Amount -

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Quantity5

Rate39392

Amount 7878.5

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Quantity5

Rate34060

Amount 6812

1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

Quantity20

Rate130372

Amount 6518.6

Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size erived from natural sources).

Quantity20

Rate9915

Amount 495.75

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.

Quantity400

Rate145

Amount 18.15

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

Quantity30

Rate4384

Amount 146.15

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement -All work up to plinth level :

Quantity-

Rate-

Amount -

1:1.5:3 (1 cement : 1.5 coarse sand (zone-Ill} derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Quantity2

Rate18091

Amount 9045.75

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregae 20 mm nominal size derived from natural sources).

Quantity1

Rate11505

Amount 11505.5

Centering and shuttering including strutting, propping etc. and removal of form for

Quantity-

Rate-

Amount -

Foundations, footings, bases of columns, etc. for mass concrete

Quantity25

Rate9803

Amount 392.15

Suspended floors, roofs, landings, balconies and access platform

Quantity25

Rate23181

Amount 927.25

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Quantity25

Rate18410

Amount 736.4

Columns, Pillars, Piers, Abutments, Posts and Struts

Quantity25

Rate24032

Amount 961.3

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Quantity-

Rate-

Amount -

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Quantity100

Rate10785

Amount 107.85

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

Quantity-

Rate-

Amount -

Thermo-Mechanically Treated bars of grade Fe-500D or more

Quantity100

Rate10785

Amount 107.85

Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand).

Quantity40

Rate12018

Amount 300.45

Extra for rendering smooth the top of suspended floors, landings and staircases (treads and risers) with cement mortar 1:2 (1 cement : 2 coarse sand), including a floating coat of neat cement and protecting the surface with a layer of 7.5 cm of earth laid over 15 mm of fine sand in case of suspended floor and bricks laid in mud mortar in case of landings and steps, including subsequent removal and cleaning of the same

Quantity20

Rate3010

Amount 150.5

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

Quantity10

Rate784

Amount 78.4

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

Quantity-

Rate-

Amount -

Cement mortar 1:4 (1 cement : 4 coarse sand)

Quantity3

Rate22111

Amount 7370.65

Cement mortar 1:6 (1 cement : 6 coarse sand)

Quantity3

Rate21396

Amount 7132.25

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Quantity-

Rate-

Amount -

Cement mortar 1:4 (1 cement : 4 coarse sand)

Quantity3

Rate28033

Amount 9344.35

Cement mortar 1:6 (1 cement : 6 coarse sand)

Quantity3

Rate27317

Amount 9105.95

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor Vlevel

Quantity-

Rate-

Amount -

Cement mortar 1:4 (1 cement :4 coarse sand)

Quantity12

Rate13485

Amount 1123.8

Extra for providing and placing in position 2 Nos 6 mm dia. M.S. bars at every third course of half brick masonry

Quantity30

Rate3144

Amount 104.8

Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).

Quantity10

Rate608

Amount 60.85

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. Complete at all levels.

Quantity-

Rate-

Amount -

Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble

Quantity-

Rate-

Amount -

Area of slab over 0.50 Sqm

Quantity6

Rate18470

Amount 3078.4

Granite stone slab of colour black, Cherry/Ruby red

Quantity-

Rate-

Amount -

Area of slab over 0.50 Sqm

Quantity5

Rate25681

Amount 5136.3

Granite stone slab of all colour and texture except black, Cherry/Ruby red

Quantity-

Rate-

Amount -

Area of slab over 0.50 Sqm

Quantity4

Rate15394

Amount 3848.7

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Quantity-

Rate-

Amount -

Marble work

Quantity20

Rate5972

Amount 298.6

Granite work

Quantity20

Rate10219

Amount 510.95

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.

Quantity22

Rate12508

Amount 568.55

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete

Quantity22

Rate21531

Amount 978.7

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of anysize as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per Sqm, includingpointing in white cement mixed with pigment of matching shade complete

Quantity5

Rate6339

Amount 1267.95

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Quantity-

Rate-

Amount -

Second class teak wood

Quantity0.5

Rate71474

Amount 142949.7

Sal wood

Quantity0.5

Rate58260

Amount 116520.3

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.

Quantity-

Rate-

Amount -

Particle Board 12 mm thick

Quantity-

Rate-

Amount -

Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS:3097, grade I

Quantity10

Rate20120

Amount 2012.05

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per Sqm) fixing with ISi marked M.S. pressed butt hinges bright finished of required size with necessary screws.

Quantity-

Rate-

Amount -

Second class teak wood

Quantity-

Rate-

Amount -

35 mm thick

Quantity2

Rate9880

Amount 4940.2

30 mm thick

Quantity2

Rate9046

Amount 4523.4

Kiln seasoned selected planks of sheesham wood

Quantity-

Rate-

Amount -

35 mm thick

Quantity2

Rate8803

Amount 4401.55

30 mm thick

Quantity2

Rate8118

Amount 4059.05

Extra for providing frosted glass panes 4 mm thick (weight not less than 10 kg per Sqm) instead of ordinary float glass panes 4 mm thick (weight not less than 10 kg per Sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).

Quantity10

Rate1764

Amount 176.4

Deduct for providing pin headed glass panes instead of ordinary float glass panes 4 mm thick (weight not less than 10 kg per Sqm) in doors, windows and clerestory windows shutters (Area of opening for glass panes excluding portion inside rebate shall be measured).

Quantity10

Rate-739

Amount 73.95

Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

Quantity-

Rate-

Amount -

35 mm thick including ISi marked Stainless Steel butt hinges with necessary screws

Quantity3

Rate7177

Amount 2392.65

30 mm thick including ISi marked Stainless Steel butt hinges with necessary screws

Quantity3

Rate6516

Amount 2172.1

25 mm thick (for cupboard) including ISi marked nickel plated bright finished M.S. piano hinges with necessary screws

Quantity3

Rate6281

Amount 2093.7

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of doorshutter to be measured).

Quantity6

Rate2774

Amount 462.35

Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).

Quantity6

Rate640

Amount 106.7

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws

Quantity-

Rate-

Amount -

30 mm thick shutters

Quantity-

Rate-

Amount -

with ISI marked M.S. pressed butt hinges bright finished of required size

Quantity-

Rate-

Amount -

Second class teak wood

Quantity2

Rate8653

Amount 4326.8

Kiln seasoned selected class of sheesham wood

Quantity2

Rate7836

Amount 3918.15

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :

Quantity-

Rate-

Amount -

2nd class teak wood

Quantity-

Rate-

Amount -

50x12 mm

Quantity12

Rate2653

Amount 221.1

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete

Quantity-

Rate-

Amount -

Fixed to steel windows by welding

Quantity500

Rate109550

Amount 219.1

Providing and fixing ISi marked IS: 1341 M.S. pressed butt hinges bright finished with necessary screws etc. complete

Quantity-

Rate-

Amount -

100x58x1.90 mm

Quantity15

Rate675

Amount 45

75x47x1.70 mm

Quantity20

Rate786

Amount 39.3

Providing and fixing ISi marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378

Quantity-

Rate-

Amount -

300x16 mm

Quantity10

Rate2165

Amount 216.55

250x16 mm

Quantity10

Rate1937

Amount 193.7

Providing and fixing ISi marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378)

Quantity-

Rate-

Amount -

250x10 mm

Quantity5

Rate419

Amount 83.9

200x10 mm

Quantity5

Rate347

Amount 69.4

150x10 mm

Quantity3

Rate178

Amount 59.45

100x10 mm

Quantity3

Rate132

Amount 44.3

Providing and fixing ISi marked 85x42 mm oxidised M.S. pull bolt lock conforming to IS : 7534 with necessary screws bolts, nut and washers etc. complete (Copper oxidised as per IS 1378

Quantity3

Rate366

Amount 122.15

Providing and fixing ISi marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378)

Quantity-

Rate-

Amount -

125 mm

Quantity3

Rate119

Amount 39.95

100 mm

Quantity3

Rate97

Amount 32.55

75 mm

Quantity3

Rate89

Amount 29.7

Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete (Copper oxidised as per IS 1378)

Quantity-

Rate-

Amount -

200 mm weighing not less than 240 grams

Quantity15

Rate809

Amount 53.95

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete

Quantity-

Rate-

Amount -

100X58X1.90 mm

Quantity70

Rate7497

Amount 107.1

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete

Quantity2

Rate1966

Amount 983.15

Providing and fixing aluminium sliding door bolts, ISi marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :

Quantity-

Rate-

Amount -

300x16 mm

Quantity3

Rate909

Amount 303.25

250x16 mm

Quantity3

Rate781

Amount 260.6

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete

Quantity-

Rate-

Amount -

300x10 mm

Quantity3

Rate390

Amount 130.1

250x10 mm

Quantity3

Rate345

Amount 115.15

200x10 mm

Quantity5

Rate498

Amount 99.7

150x10 mm

Quantity5

Rate412

Amount 82.55

100x10 mm

Quantity50

Rate3235

Amount 64.7

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc.complete

Quantity-

Rate-

Amount -

125 mm

Quantity11

Rate728

Amount 66.25

100 mm

Quantity10

Rate595

Amount 59.55

Providing and fixing aluminium hanging floor door stopper, ISi marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Quantity-

Rate-

Amount -

Twin rubber stopper

Quantity5

Rate361

Amount 72.35

Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete.

Quantity10

Rate8689

Amount 868.95

Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge

Quantity3

Rate2550

Amount 850.05

Providing & Fixing decorative high pressure laminated sheet of plain I wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality

Quantity-

Rate-

Amount -

1.0 mm thick

Quantity8

Rate7178

Amount 897.3

Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.

Quantity-

Rate-

Amount -

125 mm

Quantity40

Rate4768

Amount 119.2

100mm

Quantity40

Rate3618

Amount 90.45

75 mm

Quantity40

Rate2350

Amount 58.75

Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1. 70 mm for Series R 1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and lnline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for (i) Sites with basic wind speed 45 m/sec as per IS 875 - Part 3 (ii) Sites with structure height more than 20m for all wind speeds

Quantity-

Rate-

Amount -

Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.

Quantity-

Rate-

Amount -

Using R2 series with frame (40 mm & above) x (40 mm & above) & sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 metre).

Quantity2

Rate16597

Amount 8298.85

Using R3 series with frame (55 mm & above) x (40 mm & above) & sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system (Height upto 1.8m).

Quantity2

Rate17598

Amount 8799.25

Using R4 series with frame (64 mm & above) x (45 mm & above) & sash (44 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system (Height above 1.8m).

Quantity2

Rate19257

Amount 9628.6

Two track four panels sliding windows with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on three panels along with multi-point locking system, nylon rollers with SS 304 body.

Quantity-

Rate-

Amount -

Using R3 series with frame (55 mm & above) x (40 mm & above) & sash (30 mm & above) x (55 mm & above) (Height upto 1.8m).

Quantity2

Rate15720

Amount 7860.35

Using R4 series with frame (64 mm & above) x (45 mm & above) & sash (44 mm & above) x (55 mm & above) (Height above 1.8m).

Quantity2

Rate17159

Amount 8579.55

Two and half track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body

Quantity-

Rate-

Amount -

Using R2 series with frame (65 mm & above) x (40 mm & above) & glazed sash (25 mm & above) x (50 mm & above) & fly screen sash (18 mm & above) x (40 mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 metre).

Quantity2

Rate19866

Amount 9933.4

Using R3 series with frame (85 mm & above) x (40 mm & above) & glazed sash (30 mm & above) x (55 mm & above) & fly screen sash (20 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8 metre).

Quantity2

Rate19937

Amount 9968.7

Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body

Quantity-

Rate-

Amount -

Using R2 series with frame (70 mm & above) x (40 mm & above) & both glazed and fly screen sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 etre).

Quantity2

Rate21987

Amount 10993.55

Using R3 series with frame (98 mm & above) x (40 mm & above) & both glazed and fly screen sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8m).

Quantity2

Rate21748

Amount 10874.2

Using R4 series with frame (115 mm & above) x (45 mm & above) & both glazed and fly screen sash (44 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multipoint locking system. (Height above 1.8m)

Quantity2

Rate24744

Amount 12372.25

Three track three panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body

Quantity-

Rate-

Amount -

Using R2 series with frame (70 mm & above) x (40 mm & above) & sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre).

Quantity2

Rate17496

Amount 8748.35

Using R3 series with frame (98 mm & above) x (40 mm & above) & sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on two end panels along with multi-point locking system (Height upto 1.8 metre).

Quantity2

Rate17087

Amount 8543.6

Using R4 series with frame (115 mm & above) x (45 mm & above) & sash (44 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on two end panels along with multi-point locking system. (Height above 1.8 metre).

Quantity2

Rate19776

Amount 9888.35

Two track two panels sliding door with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system, adjustable nylon rollers with SS 304 body.

Quantity-

Rate-

Amount -

Using R3 series with frame (55 mm & above) x (40 mm & above) & sash (30 mm & above) x (74 mm & above). (Height upto 2.5 metre).

Quantity2

Rate16212

Amount 8106.3

Using R4 series with frame (64 mm & above) x (45 mm & above) & sash (44 mm & above)' x (85 mm & above). (Height above 2.5 metre).

Quantity2

Rate15465

Amount 7732.85

Two track four panels sliding door with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on three panels along with multi-point locking system, adjustable nylon rollers with SS 304 body

Quantity-

Rate-

Amount -

Using R3 series with frame (55 mm & above) x (40 mm & above) & sash (30 mm & above) x (74 mm & above). (Height upto 2.5 metre).

Quantity2

Rate14690

Amount 7345.35

Using R4 series with frame (64 mm & above) x (45 mm & above) & sash (44 mm & above) x (85 mm & above). (Height above 2.5 metre).

Quantity2

Rate14393

Amount 7196.7

Three track three panels sliding door with two glazed & one wire mesh panels with Aluminium channel for roller track wool pile, zinc alloy (zamak) powder coated handle on two panels along with multi-point locking system, adjustable nylon rollers with SS 304 body.

Quantity-

Rate-

Amount -

Using R3 series with frame (98 mm & above) x (40 mm & above) & both glazed and fly screen sash (30 mm & above) x (74 mm & above). (Height upto 2.5 metre).

Quantity2

Rate20157

Amount 10078.95

Using R4 series with frame (115 mm & above) x (45 mm & above) & both glazed and fly screen sash (44 mm & above) x (85 mm & above). (Height above 2.5 metre).

Quantity2

Rate19789

Amount 9894.8

Three track three panels sliding door with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on two panels along with multi-point locking system, adjustable nylon rollers with SS 304 body

Quantity-

Rate-

Amount -

Using R3 series with frame (98 mm & above) x (40 mm & above) & sash (30 mm & above) x (74 mm & above). (Height upto 2.5 metre

Quantity2

Rate16574

Amount 8287.05

Using R4 series with frame (115 mm & above) x (45 mm & above) & sash (44 mm & above) x (85 mm & above). (Height above 2.5 metre).

Quantity2

Rate15887

Amount 7943.95

Fixed window/ ventilator without mullion/ transom.

Quantity-

Rate-

Amount -

Using R1 series with frame (33 mm & above) x (35 mm & above). (Height upto 0.90 metre)

Quantity2

Rate16494

Amount 8247.25

Using R2 series with frame (39 mm & above) x (39 mm & above). (Height upto 1.2 metre)

Quantity2

Rate16109

Amount 8054.75

Using R3 series with frame (55 mm & above) x (45 mm & above). (Height upto 2.5 metre)

Quantity2

Rate14160

Amount 7080.05

Using R4 series with frame (64 mm & above) x (50 mm & above). (Height above 2.5 metre)

Quantity2

Rate12065

Amount 6032.85

Fixed window/ ventilator with mullion / transom

Quantity-

Rate-

Amount -

Using R 1 series with frame (33 mm & above ) x (35 mm & above) & mullion (33 mm & above) x (50 mm & above). (Height upto 0.90 metre)

Quantity2

Rate18310

Amount 9155.2

Using R2 series with frame (39 mm & above ) x (39 mm & above) & mullion (39 mm & above) x (60 mm & above). (Height upto 1.2 metre)

Quantity2

Rate17530

Amount 8765.4

Using R3 series with frame (55 mm & above ) x (45 mm & above) & mullion (55 mm & above) x (65 mm & above). (Height upto 2.5 metre

Quantity2

Rate15655

Amount 7827.75

Using R4 series with frame (64 mm & above ) x (50 mm & above) & mullion (64 mm & above) x (70 mm & above). (Height above 2.5 metre)

Quantity2

Rate13057

Amount 6528.8

Ventilator Casement window single panel with or without fixed panel with S.S. 304 friction hinges as per size and weight of sash, single point locking zinc alloy (zamak) powder coated handles.

Quantity-

Rate-

Amount -

Using R1 series with frame (33 mm & above) x (35 mm & above) & sash /mullion (33 mm & above) x (50 mm & above). (Height upto 0.90 metre).

Quantity2

Rate26402

Amount 13201.2

Using R2 series with frame (39 mm & above) x (39 mm & above) & sash /mullion (39 mm & above) x (60 mm & above). (Height upto 1.2metre)

Quantity2

Rate24509

Amount 12254.9

Using R3 series with frame (55 mm & above) x (45 mm & above) & sash /mullion (55 mm & above) x (65 mm & above). (Height above 1.2 metre)

Quantity2

Rate23839

Amount 11919.85

Casement window single panel with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system zinc alloy (zamak) powder coated handles.

Quantity-

Rate-

Amount -

Using R2 series with frame (39 mm & above) x (39 mm & above) & sash (39 mm & above) x (60 mm & above). Height upto 1.2 metre)

Quantity2

Rate28898

Amount 14449.25

Using R3 series with frame (55 mm & above ) x (45 mm & above) & sash (55 mm & above) x (65 mm & above). (Height upto 1.8 metre

Quantity2

Rate26774

Amount 13387.15

Using R4 series with frame (64 mm & above) x (50 mm & above) & sash (64 mm & above) x (70 mm & above). (Height above 1.8 metre)

Quantity2

Rate29174

Amount 14587.05

Casement window double panels with fixed mullion with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles

Quantity-

Rate-

Amount -

Using R2 series with frame (39 mm & above) x (39 mm & above) & sash (39 mm & above) x (60 mm & above) & mullion (39 mm & above) x (60 mm & above). (Height upto 1.2 metre).

Quantity2

Rate26157

Amount 13078.7

Using R3 series with frame (55 mm & above) x (45 mm & above) & sash (55 mm & above) x (65 mm & above) & mullion (55 mm & above) x (65 mm & above). (Height upto 1.8 metre).

Quantity2

Rate24945

Amount 12472.95

Using R4 series with frame (64 mm & above) x (50 mm & above) & sash (64 mm & above) x (70 mm & above) & mullion (64 mm & above) x (70 mm & above). (Height above 1.8 metre)

Quantity2

Rate26954

Amount 13477.1

Casement window double panels with French (False) Mullion with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles

Quantity-

Rate-

Amount -

Using R2 series with frame (39 mm & above) x (39 mm & above) & sash (39 mm & above) x (60 mm & above) & French (False) mullion (39 mm & above) x (60 mm & above). (Height upto 1.2 metre).

Quantity2

Rate23431

Amount 11715.95

Using R3 series with frame (55 mm & above) x (45 mm & above) & sash (55 mm & above) x (65 mm & above) & French (False) mullion (55 mm & above) x (60 mm & above). (Height upto 1.8 metre).

Quantity2

Rate22933

Amount 11466.8

Using R4 series with frame (64 mm & above) x (50 mm & above) & sash (64 mm & above) x (70 mm & above) & French (False) mullion (64 mm & above) x (60 mm & above). (Height above 1.8 metre).

Quantity2

Rate24992

Amount 12496.3

Casement cum fixed panel window having one single casement panel & one fixed panel with S.S 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles

Quantity-

Rate-

Amount -

Using R2 series with frame (39 mm & above ) x (39 mm & above) & sash (39 mm & above) x (60 mm & above) & mullion (39 mm & above)x (60 mm & above). (Height upto 1.2 metre; Each openable shutter upto 0.8m width)

Quantity2

Rate19740

Amount 9870.15

Using R3 series with frame (55 mm & above ) x (45 mm & above) & sash (55 mm & above) x (65 mm & above) & mullion (55 mm & above) x (65 mm & above). (Height upto 1.8 metre; Each openable shutter upto 0.8m width)

Quantity2

Rate18616

Amount 9308

Using R4 series with frame (64 mm & above) x (50 mm & above) & sash (64 mm & above) x (70 mm & above) & mullion (64 mm & above) x (70 mm & above). (Height above 1.8 metre; Each openable shutter upto 0.8m width)

Quantity2

Rate20425

Amount 10212.6

Casement cum fixed panel window having single casement panel at both ends & middle fixed panel with S.S 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles.

Quantity-

Rate-

Amount -

Using R2 series with frame (39 mm & above) x (39 mm & above) & sash (39 mm & above) x (60 mm & above) & mullion (39 mm & above) x (60 mm & above). (Height upto 1.2 metre; Each openable shutter upto 0.8m width)

Quantity2

Rate20948

Amount 10474.05

Using R3 series with frame (55 mm & above) x (45 mm & above) & sash (55 mm & above) x (65 mm & above) & mullion (55 mm & above) x (65 mm & above). (Height upto 1.8 metre; Each openable shutter upto 0.8m width)

Quantity2

Rate20102

Amount 10051.2

Using R4 series with frame (64 mm & above ) x (50 mm & above) & sash (64 mm & above) x (70 mm & above) & mullion (64 mm & above) x (70 mm & above). (Height above 1.8 metre; Each openable shutter upto 0.8m width)

Quantity2

Rate20401

Amount 10200.75

Casement Window with Double Rebate Frame with one Side Hung Glazed Panel and one Side Hung wire mesh Panel with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles on both glazed and fly screen panel

Quantity-

Rate-

Amount -

Using R3 series with frame (110 mm & above) x (45 mm & above) & glazed sash (55 mm & above) x (65 mm & above) & fly screen sash (30 mm & above) x (55 mm & above) & metal grill (if required to be paid separately). (Height upto 1.8 metre)

Quantity2

Rate45570

Amount 22785.35

Casement Window with Double Rebate Frame with two Side Hung Glazed Panel and two Side Hung wire mesh Pane and Fixed Mullion with S.S. 304 friction hinges as per siez and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles on both glazed and fly screen panel.

Quantity-

Rate-

Amount -

Using R3 series with frame (110 mm & above) x (45 mm & above) & glazed sash (55 mm & above) x (65 mm & above) & fly screen sash (30 mm & above) x (55 mm & above) & mullion (55 mm & above) x (65 mm & above) & metal grill (if required to be paid separately). (Height upto 1.8 metre

Quantity2

Rate41152

Amount 20576.3

Casement Window with Double Rebate Frame with two Side Hung Glazed Panel on outside and two Side Hung wire mesh Panel on inside and French (False) Mullion with S.S. 304 friction hinges as per size and weight of sash, multipoint locking system, zinc alloy (zamak) powder coated handles with shoot bolt on both glazed and fly screen panel

Quantity-

Rate-

Amount -

Using R3 series with frame (110 mm & above) x (45 mm & above) & glazed sash (55 mm &above) x (65 mm & above) & fly screen sash(30 mm & above) x (55 mm & above) & French(False) mullion (55 mm & above) x (60 mm& above) & metal grill (if required to be paid separately). (Height upto 1.8 metre).

Quantity2

Rate38095

Amount 19047.6

Casement door single panel with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides.

Quantity-

Rate-

Amount -

Using R3 series with frame (55 mm & above) x (50 mm & above) & sash (55 mm & above) x (85 mm & above) (Height upto 2.5 metre

Quantity2

Rate24992

Amount 12496.05

Using R4 series with frame (64 mm & above) x (55 mm & above) & sash (64 mm & above) x (100 mm & above). (Height above 2.5 metre).

Quantity2

Rate24908

Amount 12454.4

Casement door double panel with French (False) Mullion with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides.

Quantity-

Rate-

Amount -

Using R3 series with frame (55 mm & above) x (50 mm & above) & sash (55 mm & above) x (85 mm & above) & French (False) mullion (55 mm & above) x (60 mm & above). (Height upto 2.5 metre).

Quantity2

Rate23807

Amount 11903.75

Using R4 series with frame (64 mm & above) x (55 mm & above) & sash (64 mm & above) x (100 mm & above) & French (False) mullion (64 mm & above) x (60 mm & above). (Height above 2.5 metre).

Quantity2

Rate23637

Amount 11818.95

Casement Door with Double Rebate Frame with one Side Hung Glazed Panel and one Side Hung wire mesh Panel with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides of glazed panel and zinc alloy (Zamak) powder coated handle along with multi-point locking system on one side of fly screen panel.

Quantity-

Rate-

Amount -

Using R3 series with frame (110 mm & above) x (45 mm & above) & glazed sash (55 mm & above) x (85 mm & above) & fly screen sash (55 mm & above) x (65 mm & above). (Height upto 2.5 metre).

Quantity2

Rate39988

Amount 19994.4

Providing and fixing stainless steel (SS-304 grade) friction hinges to the side/top hung uPVC windows, of approved quality, with necessary stainless steel screws etc. as per direction of Engineer-in-charge.

Quantity-

Rate-

Amount -

200 x 19 x 1.9 mm

Quantity7

Rate2669

Amount 381.3

250 x 19 x 1.9 mm

Quantity7

Rate2957

Amount 422.55

300 x 19 x 1.9 mm

Quantity7

Rate3216

Amount 459.55

350 x 19 x 1.9 mm

Quantity7

Rate4372

Amount 624.6

400 x 19 x 1.9 mm

Quantity7

Rate4272

Amount 610.35

Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. complete.

Quantity3

Rate693

Amount 231.05

Providing and fixing zinc alloyed (white powder coated) touch lock for \uPVC sliding window with necessary screws etc. complete

Quantity3

Rate612

Amount 204

Providing and fixing steel roller for uPVC sliding window with necessary screws etc. complete.

Quantity3

Rate347

Amount 115.8

Providing and fixing steel roller for uPVC sliding door with necessary screws etc. complete

Quantity3

Rate556

Amount 185.5

Providing and fixing steel (white power coated) crescent lock for uPVC sliding window/ door with necessary screws etc. complete.

Quantity3

Rate594

Amount 198.3

Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete

Quantity-

Rate-

Amount -

125 mm

Quantity8

Rate953

Amount 119.2

100mm

Quantity10

Rate904

Amount 90.45

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Quantity500

Rate66850

Amount 133.7

Providing and fixing in position collapsible steel shutters with vertical channels 20x1 0x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm diasteel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer

Quantity1

Rate11439

Amount 11439.6

Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer

Quantity-

Rate-

Amount -

Using M.S. angels 40x40x6 mm for diagonal braces

Quantity7

Rate40630

Amount 5804.35

Using flats 30x6mm for diagonal braces and central cross piece

Quantity7

Rate38946

Amount 5563.75

Providing and fixing factory made ISi marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 Band K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings,glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment).

Quantity-

Rate-

Amount -

Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size)

Quantity10

Rate1310

Amount 131.05

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer

Quantity-

Rate-

Amount -

Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Quantity10

Rate1417

Amount 141.7

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold ofmild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer in-charge

Quantity-

Rate-

Amount -

Profile B

Quantity-

Rate-

Amount -

Fixing with adjustable lugs with split end tail to Each jamb

Quantity20

Rate11666

Amount 583.3

Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)

Quantity10

Rate5704

Amount 570.4

Profile C

Quantity-

Rate-

Amount -

Fixing with adjustable lugs with split end tail to Each jamb

Quantity20

Rate12235

Amount 611.75

Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)

Quantity10

Rate5988

Amount 598.85

Profile E

Quantity-

Rate-

Amount -

Fixing with adjustable lugs with split end tail to Each jamb

Quantity20

Rate12804

Amount 640.2

Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)

Quantity10

Rate6273

Amount 627.3

Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

Quantity-

Rate-

Amount -

Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size)

Quantity40

Rate7808

Amount 195.2

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Quantity-

Rate-

Amount -

Hot finished welded type tubes

Quantity25

Rate4860

Amount 194.4

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer

Quantity-

Rate-

Amount -

M.S. tube

Quantity15

Rate2952

Amount 196.8

G.I. pipes

Quantity15

Rate3045

Amount 203.05

Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.

Quantity-

Rate-

Amount -

10 x 60 mm

Quantity10

Rate1311

Amount 131.1

10 x 80 mm

Quantity10

Rate1376

Amount 137.65

10 x 120 mm

Quantity10

Rate1709

Amount 170.95

10 x 140 mm

Quantity5

Rate911

Amount 182.2

10 x 160 mm

Quantity5

Rate1122

Amount 224.5

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Quantity15

Rate11586

Amount 772.4

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.

Quantity-

Rate-

Amount -

Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides

Quantity3

Rate2534

Amount 844.7

Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides

Quantity2

Rate2267

Amount 1133.55

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with

Quantity-

Rate-

Amount -

4.0 mm thick glass panes

Quantity6

Rate6387

Amount 1064.65

5.5 mm thick glass panes

Quantity6

Rate8340

Amount 1390.15

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.

Quantity-

Rate-

Amount -

40 mm thick with 20 mm nominal size stone aggregate

Quantity25

Rate15355

Amount 614.2

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement

Quantity-

Rate-

Amount -

18 mm thick

Quantity3

Rate1986

Amount 662.05

Cement concrete pavement with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), including finishing complete

Quantity1

Rate8595

Amount 8595.15

Providing and fixing glass strips in joints of terrazo/ cement concrete floors.

Quantity-

Rate-

Amount -

40 mm wide and 4 mm thick

Quantity40

Rate3670

Amount 91.75

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand)

Quantity-

Rate-

Amount -

25 mm thick

Quantity7

Rate13637

Amount 1948.25

Kata stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Quantity1

Rate2354

Amount 2354.7

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/Sqm including pointing the joints with white cement and matching pigment etc., complete

Quantity6

Rate6579

Amount 1096.55

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sqm including grouting the joints with white cement and matching pigments etc., complete

Quantity6

Rate7980

Amount 1330

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry@ 3.3 kg/ Sqm including pointing the joints with white cement and matching pigments etc., complete.

Quantity1

Rate1439

Amount 1439.4

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sqm including grouting the joints with white cement and matching pigments etc., complete

Quantity-

Rate-

Amount -

Size of Tile 600x600 mm

Quantity25

Rate38836

Amount 1553.45

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/Sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily

Quantity-

Rate-

Amount -

Double charge vitrified tile polished finish of size

Quantity-

Rate-

Amount -

Size of Tile 600 x 600 mm

Quantity30

Rate43609

Amount 1453.65

Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ Sqm.

Quantity30

Rate-25503

Amount 850.1

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sqm including grouting the joint with white cement & matching pigments etc. complete.

Quantity-

Rate-

Amount -

Size of Tile 600x600 mm

Quantity6

Rate9738

Amount 1623.05

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge

Quantity-

Rate-

Amount -

Size of Tile 600x600 mm

Quantity6

Rate1854

Amount 309.05

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).

Quantity-

Rate-

Amount -

Size of Tile 600x600 mm

Quantity35

Rate60387

Amount 1725.35

Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles

Quantity25

Rate-332

Amount 13.3

Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required

Quantity8

Rate4291

Amount 536.4

Providing gala 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design

Quantity-

Rate-

Amount -

In 75x75 mm deep chase

Quantity8

Rate2441

Amount 305.15

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

Quantity-

Rate-

Amount -

75 mm diameter

Quantity4

Rate995

Amount 248.8

110 mm diameter

Quantity8

Rate3019

Amount 377.4

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion

Quantity-

Rate-

Amount -

Coupler

Quantity-

Rate-

Amount -

75mm

Quantity2

Rate183

Amount 91.7

110mm

Quantity2

Rate272

Amount 136.15

Single pushfit Coupler :

Quantity-

Rate-

Amount -

75mm

Quantity2

Rate186

Amount 93.1

110mm

Quantity2

Rate255

Amount 127.6

Single tee with door

Quantity-

Rate-

Amount -

75x75x75 mm

Quantity2

Rate328

Amount 164.2

110x110x110 mm

Quantity3

Rate702

Amount 234.15

Single tee without door

Quantity-

Rate-

Amount -

75x75x75 mm

Quantity3

Rate432

Amount 144.3

110x110x110 mm

Quantity3

Rate664

Amount 221.35

Bend 87.5°

Quantity-

Rate-

Amount -

75 mm bend

Quantity3

Rate317

Amount 105.9

110 mm bend

Quantity3

Rate451

Amount 150.35

Shoe (Plain)

Quantity-

Rate-

Amount -

75 mm Shoe

Quantity3

Rate279

Amount 93.1

110 mm Shoe

Quantity3

Rate395

Amount 131.85

Providing and fixing precoated galvanised iron profile sheets (size, shapeand pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per Sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Quantity2

Rate1477

Amount 738.65

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/ Sqm, both side inclusive) consisting of main 'T' runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main 'T' at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge

Quantity-

Rate-

Amount -

GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/Sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

Quantity2

Rate3805

Amount 1902.95

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/Sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation and backed with a black Glass fiber acoustical fleece.

Quantity2

Rate4137

Amount 2068.75

Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with the help of soffit cleat 37x27x25x1 .6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of GI steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with the help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized@ 120 gms/Sqm (both side inclusive), fixing with clip in tiles into spring T with

Quantity-

Rate-

Amount -

GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ Sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

Quantity2

Rate4443

Amount 2221.7

GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ Sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRG of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), includingfactory painted after bending and perforation.

Quantity2

Rate4709

Amount 2354.65

12 mm cement plaster of mix :

Quantity-

Rate-

Amount -

1:4 (1 cement: 4 coarse sand)

Quantity15.02

Rate5367

Amount 357.35

1:6 (1 cement: 6 coarse sand)

Quantity15

Rate5154

Amount 343.65

15 mm cement plaster on rough side of single or half brick wall of mix :

Quantity-

Rate-

Amount -

1:4 (1 cement: 4 coarse sand)

Quantity19.99

Rate8230

Amount 411.75

1:6 (1 cement: 6 coarse sand)

Quantity20

Rate7907

Amount 395.35

6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floatingb coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams

Quantity40

Rate15866

Amount 396.65

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers

Quantity56

Rate24

Amount 22.1

Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof

Quantity10

Rate871

Amount 87.1

Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand):

Quantity-

Rate-

Amount -

Flush / Ruled/ Struck or weathered pointing

Quantity6

Rate1544

Amount 257.35

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge

Quantity-

Rate-

Amount -

With cement mortar 1:4 (1cement: 4 coarse sand)

Quantity6

Rate3363

Amount 560.5

Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

Quantity-

Rate-

Amount -

Door chowkhats .

Quantity1

Rate1782

Amount 1782.55

Window chowkhats .

Quantity1

Rate1125

Amount 1125.15

Clerestory window chowkhats .

Quantity1

Rate851

Amount 851

Fixing chowkhat in existing opening in brick/ RCC wall with dash fasteners/ Chemical fasteners of appropriate size (3 nos on Each vertical member of door chowkhat and 2 nos on Each vertical member of window chowkhats), including Cost of dash fasteners/ chemical fastener.

Quantity1

Rate217

Amount 217.1

Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface including disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge

Quantity-

Rate-

Amount -

For door/ window/ clerestory window

Quantity1

Rate1264

Amount 1264.35

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

Quantity-

Rate-

Amount -

Float glass panes of nominal thickness 4 mm (weight not less than 10kg/Sqm)

Quantity1

Rate1090

Amount 1090.65

Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/Sqm)

Quantity1

Rate1416

Amount 1416.15

Renewing glass panes, with wooden fillets wherever necessary

Quantity-

Rate-

Amount -

Float glass panes of nominal thickness 4 mm (weight not less than 10kg/Sqm)

Quantity15

Rate23713

Amount 1580.9

Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/Sqm)

Quantity15

Rate28596

Amount 1906.4

Renewal of old putty of glass panes (length)

Quantity2

Rate112

Amount 56.15

Refixing old glass panes with putty and nails

Quantity2

Rate1459

Amount 729.85

Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge

Quantity15

Rate1086

Amount 72.45

Renewing bottom rail and/or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer

Quantity25

Rate7471

Amount 298.85

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete

Quantity10

Rate2714

Amount 271.45

Providing and fixing bright finished brass helical door spring (superior quality).

Quantity10

Rate5439

Amount 543.95

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.

Quantity50

Rate16912

Amount 338.25

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material including malba, all complete as per the direction of Engineer-in charge

Quantity-

Rate-

Amount -

Orissa pattern W.C Pan of size 580x440 mm

Quantity1

Rate4478

Amount 4478.75

Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge

Quantity6

Rate804

Amount 134.1

Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge

Quantity25

Rate86

Amount 3.45

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge. (a) Internal Work- Exposed on wall

Quantity15

Rate48

Amount 3.25

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Quantity3

Rate1287

Amount 429.1

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/Sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane

Quantity-

Rate-

Amount -

3 mm thick

Quantity20

Rate11219

Amount 560.95

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Quantity-

Rate-

Amount -

Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Quantity1

Rate2434

Amount 2434.25

Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Quantity3

Rate4510

Amount 1503.6

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge

Quantity1

Rate3551

Amount 3551.25

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Quantity-

Rate-

Amount -

In lime mortar

Quantity1

Rate851

Amount 851.5

In cement mortar

Quantity1

Rate2060

Amount 2060.2

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured):

Quantity-

Rate-

Amount -

From brick work in lime mortar

Quantity1500

Rate8032

Amount 5355.3

From brick work in cement mortar

Quantity1500

Rate10051

Amount 6700.8

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Quantity-

Rate-

Amount -

Of area 3 sq. metres and below

Quantity3

Rate1101

Amount 367.2

Of area beyond 3 sq. metres

Quantity1

Rate502

Amount 502.75

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead

Quantity-

Rate-

Amount -

Of area 3 sq. metres and below

Quantity5

Rate717

Amount 143.5

Of area beyond 3 sq. metres

Quantity3

Rate566

Amount 188.9

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

Quantity15

Rate84

Amount 5.65

Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge

Quantity100

Rate385

Amount 3.85

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

Quantity-

Rate-

Amount -

For thickness of tiles 10 mm to 25 mm

Quantity30

Rate2202

Amount 73.4

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead

Quantity35

Rate9325

Amount 266.45

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:

Quantity-

Rate-

Amount -

G.S. Sheet

Quantity15

Rate2474

Amount 164.95

Asbestos Cement sheet

Quantity15

Rate1159

Amount 77.3

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :

Quantity-

Rate-

Amount -

75 to 80 mm dia pipe

Quantity10

Rate757

Amount 75.7

100 mm dia pipe

Quantity35

Rate2730

Amount 78

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Quantity3

Rate336

Amount 112.05

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Quantity150

Rate8197

Amount 54.65

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineerin-charge.

Quantity50

Rate2817

Amount 56.35

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Quantity70

Rate18476

Amount 263.95

Brick edging in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Quantity15

Rate2914

Amount 194.3

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape (R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq. mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)

Quantity15

Rate5637

Amount 375.8

Providing and laying 60 mm thick faciory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Quantity8

Rate7776

Amount 972

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Quantity1

Rate10117

Amount 10117.6

Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge

Quantity4

Rate157

Amount 39.35

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge

Quantity30

Rate3952

Amount 131.75

Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost).

Quantity50

Rate20147

Amount 402.95

Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost)

Quantity3

Rate328

Amount 109.45

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge

Quantity-

Rate-

Amount -

60 mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern

Quantity6

Rate6273

Amount 1045.65

80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern

Quantity6

Rate6549

Amount 1091.5

Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100 mm c/c on both ways, neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick, 100 mm wide MS sheet duly painted over priming coat, reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc including cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.

Quantity40

Rate123278

Amount 3081.95

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required

Quantity-

Rate-

Amount -

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Quantity1

Rate6767

Amount 6767.4

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :

Quantity-

Rate-

Amount -

W.C. pan with ISI marked white solid plastic seat and lid

Quantity1

Rate6515

Amount 6515.55

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require

Quantity-

Rate-

Amount -

White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

Quantity1

Rate2226

Amount 2226.35

Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock

Quantity1

Rate1550

Amount 1550.6

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :

Quantity-

Rate-

Amount -

Kitchen sink with drain board

Quantity-

Rate-

Amount -

510x1040 mm bowl depth 250 mm

Quantity1

Rate6945

Amount 6945.6

Kitchen sink without drain board

Quantity-

Rate-

Amount -

610x460 mm bowl depth 200 mm

Quantity1

Rate3873

Amount 3873.8

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required

Quantity-

Rate-

Amount -

Size 600x450x200 mm

Quantity1

Rate6585

Amount 6585.8

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Quantity2

Rate698

Amount 349.15

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete

Quantity-

Rate-

Amount -

10 litre capacity - White

Quantity1

Rate1190

Amount 1190.65

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Quantity-

Rate-

Amount -

Semi rigid pipe

Quantity-

Rate-

Amount -

32 mm dia

Quantity6

Rate623

Amount 103.9

40 mm dia

Quantity6

Rate700

Amount 116.7

Flexible pipe

Quantity-

Rate-

Amount -

32 mm dia

Quantity6

Rate717

Amount 119.55

40 mm dia

Quantity6

Rate717

Amount 119.55

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Quantity1

Rate1607

Amount 1607.95

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc

Quantity-

Rate-

Amount -

15 mm nominal dia .Pipes.

Quantity3

Rate1493

Amount 497.8

20 mm nominal dia .Pipes.

Quantity2

Rate1075

Amount 537.6

25 mm nominal dia .Pipes.

Quantity2

Rate1254

Amount 627.25

32 mm nominal dia .Pipes.

Quantity2

Rate1478

Amount 739.3

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :

Quantity-

Rate-

Amount -

15 mm dia. nominal bore

Quantity6

Rate3482

Amount 580.45

20 mm dia. nominal bore

Quantity2

Rate1270

Amount 635.2

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.

Quantity-

Rate-

Amount -

15 mm dia. nominal bore

Quantity6

Rate1932

Amount 322.15

20 mm dia. nominal bore

Quantity2

Rate737

Amount 368.6

25 mm dia. nominal bore

Quantity2

Rate935

Amount 467.75

32 mm dia. nominal bore

Quantity2

Rate1080

Amount 540.3

40 mm dia. nominal bore

Quantity2

Rate1234

Amount 617.05

50 mm dia. nominal bore

Quantity2

Rate1524

Amount 762.15

65 mm dia. nominal bore

Quantity2

Rate1793

Amount 896.6

80 mm dia. nominal bore

Quantity2

Rate2083

Amount 1041.7

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :

Quantity-

Rate-

Amount -

25 to 40 mm nominal bore

Quantity3

Rate2735

Amount 911.9

50 to 80 mm nominal bore

Quantity1

Rate1785

Amount 1785.35

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :

Quantity-

Rate-

Amount -

15 mm nominal bore

Quantity2

Rate636

Amount 318.35

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931

Quantity-

Rate-

Amount -

15 mm nominal bore

Quantity2

Rate1013

Amount 506.8

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

Quantity-

Rate-

Amount -

15 mm nominal bore

Quantity2

Rate1597

Amount 798.95

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931

Quantity-

Rate-

Amount -

15 mm nominal bore

Quantity2

Rate1340

Amount 670.45

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

Quantity-

Rate-

Amount -

15mm nominal bore

Quantity2

Rate1148

Amount 574.3

Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps

Quantity-

Rate-

Amount -

100 mm diameter

Quantity5

Rate445

Amount 89

150 mm diameter

Quantity5

Rate492

Amount 98.45

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :

Quantity-

Rate-

Amount -

250 mm dia. R.C.C. pipe

Quantity100

Rate89980

Amount 899.8

300 mm dia. R.C.C. pipe

Quantity60

Rate59658

Amount 994.3

Supplying and fixing C.I. cover without frame for manholes :

Quantity-

Rate-

Amount -

455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg

Quantity2

Rate2716

Amount 1358

Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg

Quantity2

Rate1574

Amount 787

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed echanicallywherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

Quantity-

Rate-

Amount -

For fixed portion

Quantity-

Rate-

Amount -

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Quantity5

Rate2475

Amount 495.05

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Quantity5

Rate2654

Amount 530.9

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Quantity-

Rate-

Amount -

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Quantity3

Rate1795

Amount 598.6

Powder coated aluminium (minimum thickness of powder coating 50 micron

Quantity3

Rate1903

Amount 634.45

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge

Quantity-

Rate-

Amount -

Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

Quantity1

Rate1139

Amount 1139.3

Pre-laminated particle board with decorative lamination on both sides

Quantity1

Rate1115

Amount 1115.4

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):

Quantity-

Rate-

Amount -

With float glass panes of 4.0 mm thickness (weight not less than 10kg/Sqm)

Quantity1

Rate1176

Amount 1176.8

With float glass panes of 5 mm thickness (weight not less than 12.50 kg/Sqm)

Quantity1

Rate1505

Amount 1505.25

With float glass panes of 8 mm thickness (weight not less than 20 kg/Sqm)

Quantity1

Rate1685

Amount 1685.4

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in- charge.

Quantity-

Rate-

Amount -

With stainless steel cover plate minimum 1.25 mm thickness

Quantity1

Rate2823

Amount 2823.85

Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately).

Quantity1

Rate817

Amount 817.15

Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200 mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3 mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direcion of Engineer-in charge.

Quantity2

Rate164

Amount 82.45

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.

Quantity-

Rate-

Amount -

Upto 5mm depth and 5 mm width

Quantity8

Rate774

Amount 96.75

Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete

Quantity1

Rate528

Amount 528.85

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).

Quantity1

Rate638

Amount 638.35

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Quantity6

Rate31955

Amount 5325.9

Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/ structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600

Quantity-

Rate-

Amount -

Upto 5 mm depth and 5 mm width

Quantity20

Rate2962

Amount 148.1

Upto 10 mm depth and 10 mm width

Quantity20

Rate4019

Amount 200.95

Upto 20 mm depth and 20 mm width

Quantity5

Rate1816

Amount 363.2

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying (a) First layer of slurry of cement @ 0.488 kg/Sqm mixed with water proofing cement compound @ 0.253 kg/ Sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/Sqm mixed with water proofing cement compound @ 0.126 kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Quantity3

Rate1851

Amount 617.05

Grading roof for water proofing treatment with

Quantity-

Rate-

Amount -

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Quantity1

Rate8042

Amount 8042.3

Cement mortar 1:3 (1 cement : 3 coarse sand)

Quantity1

Rate16112

Amount 16112.1

Cement mortar 1:4 (1cement : 4 coarse sand)

Quantity1

Rate15155

Amount 15155.6

Providing and fixing 15 mm thick false ceiling tiles at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6&7), humidity resistance of 100%, thermal conductivity 0.043 W/m K as per ASTM 518:1991,in true horizontal level on the exiting frame work consisting of T-sections and Lsections suitably fixed according to tile size as per direction of Engineer-in-charge

Quantity1

Rate1781

Amount 1781.2

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 gram per Sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per Sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.

Quantity-

Rate-

Amount -

With semi perforated 12 mm thick micro tegular edged GRG \false ceiling tiles

Quantity2

Rate3704

Amount 1852.05

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595 mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ≥ 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32 mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8 mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge

Quantity-

Rate-

Amount -

With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6

Quantity1

Rate2333

Amount 2333.6

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid Poor/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

Quantity-

Rate-

Amount -

Frame size 45 x 70 mm

Quantity1

Rate705

Amount 705.85

Frame size 45 x 85 mm

Quantity1

Rate926

Amount 926.35

Frame size 50 x 100 mm

Quantity1

Rate947

Amount 947.7

Frame size 50 x 125 mm

Quantity1

Rate1075

Amount 1075.7

Frame size 65 x 100 mm

Quantity1

Rate1111

Amount 1111.3

Frame size 65 x 125 mm

Quantity1

Rate1381

Amount 1381.6

Frame size 65 x 150 mm

Quantity1

Rate1637

Amount 1637.65

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

Quantity-

Rate-

Amount -

30 mm thick

Quantity1

Rate4346

Amount 4346.7

35 mm thick

Quantity1

Rate5015

Amount 5015.35

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

Quantity-

Rate-

Amount -

30 mm thick

Quantity1

Rate4764

Amount 4764.2

35 mm thick

Quantity1

Rate5432

Amount 5432.85

P/F stainless steel first quality curtain rod with all fitting and fixture i/c bracket and all other necessary accessories complete as per direction of engineer in charge.

Quantity20

Rate9208

Amount 460.41

Providing and fixing 25mm dia meter curtain rods of 1.25mm thick brass plates with two brass brackets fixed with brass screws and PVC plugs etc. wherever necessary complete .

Quantity3

Rate669

Amount 223.29

Fixing of old girder or grill in position including welding, drilling, cutting etc. complete as per direction of EIC (labour rate only)

Quantity100

Rate2430

Amount 24.3

Dismantiling CC Floor Nominal Concrete 1:3:6 or richer mix (i/c equivalent design mix) i/C base concrete Nominal Concrete 1:4:8 or leaner mix (i/C equivalent design mix) manually by mechanical means including disposal of material withing 50 meters lead as per direction of EIC.

Quantity25

Rate5440

Amount 217.6

Grinding of Existing Stone Floor/DADO/Skirting including polishing complete in all respect.

Quantity100

Rate17690

Amount 176.9

S/F of MS steel shutter Almirah type made from 1.0mm. Thick MS Sheet including frame hold fast mortise handle lock with double key looking mirror frame steel pegs on back side and i/c hammer painting of approved shade on front and three coats of synthetic enamel paint at backside i/c grouting in wall with 1:2:4 cement concrete i/c supply of all material labour & T&P etc. required for proper completion of the work

Quantity8

Rate23694

Amount 2961.8

S/F of 100 mm wide vertical blinds NEHA/VISTA/CLASSIC or any other equivalent approved brand with prior approval of EIC, complete in all respect.

Quantity3

Rate4704

Amount 1568

Providing & fixing of rolling blinds NEHA/VISTA/CLASSIC or any other equivalent approved brand with prior approval of EIC, complete in all respect

Quantity8

Rate18165

Amount 2270.7

Providing laying and jointing 160 mm dia UPVC pipe of Ist quality complete in all respect as per direction of EIC

Quantity2

Rate2058

Amount 1029

Providing laying and jointing 110 mm dia UPVC pipe of Ist quality complete in all respect as as per direction of EIC

Quantity10

Rate4878

Amount 487.8

Providing laying and jointing 75 mm dia UPVC pipe of Ist quality complete in all respect as as per direction of EIC

Quantity20

Rate6940

Amount 347

Making Knobs in 12 mm square bar used in fencing including smithy work complete in all respect.

Quantity20

Rate160

Amount 8

Providing and fixing aluminium sheet 0.50 thick on existing door shutter (Bathroom and WC door) using nails

Quantity20

Rate16814

Amount 840.7

Providing laying and jointing 75 mm dia SWR pipe single socket type B of Ist quality prince make or equivalent approved make complete in all respects as per directions of EIC

Quantity85

Rate56163

Amount 660.75

Providing laying and jointing 90 mm dia SWR pipe single socket type B of Ist quality prince make or equivalent approved make complete in all respects as per directions of EIC

Quantity20

Rate15558

Amount 777.9

Providing laying and jointing 110 mm dia SWR pipe single socket type B of Ist quality prince make or equivalent approved make complete in all respects as per directions of EIC

Quantity25

Rate24517

Amount 980.7

Providing laying and jointing 160 mm dia SWR pipe single socket type B of Ist quality prince make or equivalent approved make complete in all respects as per directions of EIC

Quantity20

Rate35447

Amount 1772.35

Providing and fixing shower essco make model no. EOS-542N or equivalent approved make overhead shower 100 mm dia round shape single flow (ABS Body Chrome Plated with Gray Face plate) with Rubit Cleaning System fixied with ALE-536A Shower arm 240 mm Long (light weight) Round Shape for wall mounted shower with Wall Flange all complete as per direction of engineer in charge.

Quantity3

Rate4431

Amount 1477

Providing and fixing health faucet (ABS body) with 8mm dia. 1.2 meter long Flexible Tube & Wall hook ESSCO make model no. ALE-CHR-593 or equivalent approved make as per directions of EIC.

Quantity3

Rate5394

Amount 1798

Providing and fixing CP Brass pillar cock rocket type with Aerator ESSCO make model no. SQT 507KN or equivalent approved make as per direction of EIC.

Quantity8

Rate12177

Amount 1522.15

Providing and fixing Toilet Paper Holder Essco make model no. AEC-1151N or equivalent approved make etc, complete as per direction of the EIC

Quantity3

Rate3585

Amount 1195

Providing and fixing Bottle Trrap with Fully casted body 32mm with 190mm & 125mm long connecting pipes Essco make model no. ALE-773ML300X125 or equivalent approved make as per directions of EIC

Quantity3

Rate4837

Amount 1612.6

Providing and fixing CP brass Basin inlet connection angle valve ESSCO make model no. SQT-526NKM or equivalent approved make etc complete as per direction of EIC.

Quantity2

Rate1898

Amount 949.45

Providing and fixing CP brass concealed stop cock with sliding flange, size-16mm ESSCO make model no SQT-5414FKN or equivalent approved make etc. complete as per directions of EIC

Quantity3

Rate4385

Amount 1461.85

Providing and fixing table mounted sink cock with swinging pipe spout (Table Mounted Model) with ESSCO make model no. SQT 523S or equivalent approved make as per directions of EIC

Quantity2

Rate4762

Amount 2381.15

Providing and fixing wall mounted sink cock with swinging pipe spout with ESSCO make model no. SQT-522S or equivalent approved make etc. complete as per directions of EIC

Quantity3

Rate6058

Amount 2019.45

Providing and fixing short body bib cock with ESSCO make model no. SQT-511KN or equivalent approved make as per directions of EIC

Quantity5

Rate5576

Amount 1115.2

Providing and fixing long body bib cock with Wall Flange & Aerator ESSCO make model no. SQT-512KN or equivalent approved as per instruction of EIC

Quantity3

Rate4973

Amount 1657.75

Providing and fixing shower jaquar make model no. OHS1605 (150x150mm) or equivalent approved make as per directions of EIC.

Quantity3

Rate16456

Amount 5485.6

Providing and fixing shower Arm 400x25x25 mm square shape for wall mounted showers with flange jaquar make model no. SHA 455L400 or equuvalent approved make as per direction of EIC

Quantity11

Rate31828

Amount 2893.5

Providing and fixing health faucet with 8 mm dia, 1 meter long flexible Tube & Wall hook. Jaquar make model no. ALD 573 or equivalent approved make as per directions of EIC

Quantity6

Rate13861

Amount 2310.2

Providing and fixing Bowl with Cistern for Extended wall hung WC with PP soft close seat cover, Hinges, Dual Flush cistern fitting. Accessories set, size 380x630x770 mm jaquar make model no. CNS-WHT-353SPPZ or equivalent approved make as per directions of EIC

Quantity2

Rate27092

Amount 13546.2

Providing and fixing under counter wash basin with fitting accessories size 485x370x205 mm shape rectagular jaquar make model no. CNS-WHT-701 or equivalent approved make as per directions of EIC

Quantity2

Rate8399

Amount 4199.65

Providing and fixing wall hung full padestal wash Basin with fixing Accessories size 560x415x200 mm pedestal jaquar make model no. CNSWHT 801 & CNW WHT 301 or equivalent approved make as per directions of EIC

Quantity2

Rate9767

Amount 4883.6

Providing and fixing CP brass angular stop cock with valve flange Jaquar Make Model No. CON-059KN or equivalent approved make as per directions of EIC

Quantity3

Rate3843

Amount 1281

Providing and fixing CP brass pillar cock Auto closing system jaquar Make Model No. PRS-031 or equivalent approved make as per directions of EIC

Quantity3

Rate9087

Amount 3029.15

P/F CP brass pillar cock jaquar make CON011KN or equivalent of approved make as per direction of EIC

Quantity3

Rate5199

Amount 1733.1

P/F CP brass long neck pillar cock with aerator jaquar model no. CON-021KN or equivalent approved make as per direction of EIC

Quantity3

Rate6826

Amount 2275.65

Providing and fixing CP brass wall mixer with provision for overhead shower with 115 mm long bend pipe or upper side, connecting legs & Wall flanges jaquar make model no. CON-273KNUPR or equivalent approved make as per directions of EIC

Quantity3

Rate20255

Amount 6751.7

P/F Central hole basin mixer without popup waste system with 450 mm long braided hose jaquar make model No. CON-167-KNB or equivalent of approved make as per direction of Engineer in Charge.

Quantity3

Rate15146

Amount 5048.7

Providing and fixing Corner Glass Shelf (With Bracket) jaquar make model no. ACN-1173 or equivalent approved make as per directions of EIC

Quantity2

Rate4890

Amount 2445.4

Providing and fixing Toilet Paper Holder with stainless steel flap jaquar make model no. ACN-1153S or equivalent approved make to be fixed with C.P. brass screws complete as per direction of the engineer-in-charge.

Quantity3

Rate5664

Amount 1888.2

Providing and fixing Bottle Trap jaquar make 32 mm size with 250 mm x 190 mm long wall connection pipe & Wall Flange model no. ALD-PHR-769L250x190 or equivalent approved make as per directions of EIC

Quantity6

Rate13834

Amount 2305.8

Providing and fixing Towel Ringround with Round Flange jaquar model no. Can-1121BN or equivalent approved make to be fixed with CP brass screws etc. complete as per direction of the engineer in charge.

Quantity3

Rate4850

Amount 1616.95

P/F CP brass bib cock jaquar make CON-047KN with wall flange or equivalent of approved make as per directions of Engineer in Charge.

Quantity5

Rate7535

Amount 1507.1

P/F 15mm dia long body bib cock Jaquar make Model No. CON-107-KN or equivalent of approved make as per direction of Engineer in Charge.

Quantity5

Rate9946

Amount 1989.3

Providing and fixing 75 mm dia upvc nahani trap with material and labour etc complete as per directions of EIC

Quantity5

Rate844

Amount 168.8

Providing and fixing 100 mm dia CP floor jali (Heavy Duty) as per direction of EIC

Quantity20

Rate1094

Amount 54.7

Brick work with old bricks (supplied free of cost at our stores) in superstructure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand)

Quantity1

Rate5825

Amount 5825.2

Brick work with old bricks (supplied free of cost at our stores) in superstructure above plinth level up to floor V level in cement mortar 1:6 (1 cement : 6 coarse sand)

Quantity1

Rate5587

Amount 5587.3

Half brick masonry with old bricks (supplied free of cost at our central stores) in superstructure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand) masaonry with old bricks (1:4 cm) etc. complete in all respects as per directions of EIC

Quantity2

Rate1427

Amount 713.55

Supplying and fixing SS pull handle H type (pair) size of 450 mm Dorset make model no. SH 18 P SS or equivalent of approved make as per direction of EIC

Quantity3

Rate12134

Amount 4044.95

Supplying and fixing SS pull handle H type (pair) size of 300 mm Dorset make model no. SH 12 P SS or equivalent of approved make as per direction of EIC

Quantity3

Rate8716

Amount 2905.65

Supplying and fixing SS pull handle H type (pair) size of 600 mm dorset make model no. SH 24 P SS or equivalent of approved make as per direction of EIC

Quantity3

Rate16149

Amount 5383.2

Extra difference cost for providing and fixing glass door fitting combo set with lock patch. Top bottom patch fittings of dorset model no. CS 100 WL or equivalent approved make having brand logo embossed on the body/plate with a double spring mechanism and door weight upto 100 kg for doors, including cost of cutting floor, embedding in floors as required and making good the same matching to the existing floor finishing and cover plate with brass pivot and single piece MS sheet (With SS Cover plate minimum 1.25 mm thickness) outer box with slide plate etc. complete as per the direction of EIC.

Quantity5

Rate57111

Amount 11422.3

Extra difference cost for providing and fixing glass door fitting combo set with lock patch. Top bottom patch fittings of dorset model no. CS 70 WL or equivalent approved make having brand logo embossed on the body/plate with a double spring mechanism and door weight upto 70 kg for doors, including cost of cutting floor , embedding in floors as required and making good the same matching to the existing floor finishing and cover plate with brass pivot and single piece MS sheet (With SS cover plate minimum 1.25 mm thickness) outer box with slide plate etc. complete as per the direction of EIC.

Quantity8

Rate56270

Amount 7033.8

Refixing old AC Sheet etc, complete as per directions of engineer in charge. (old sheets supplied free of cost from central store)

Quantity80

Rate7648

Amount 95.6

Supplying & fixing of 10 mm thick pvc wall penaling with prior approval of EIC, complete in all respect.

Quantity80

Rate116152

Amount 1451.9

Providing, mixing and applying 12 mm thick ready mix cement plaster of approved make as per specifications and directions of Engineer-in-charge.

Quantity179.96

Rate67664

Amount 376

Providing, mixing and applying 15 mm thick ready mix cement plaster of approved make as per specifications and directions of Engineer-in-charge.

Quantity181

Rate82355

Amount 455

Brick work with old bricks (supplied free of cost at our stores ) in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand)

Quantity5

Rate20459

Amount 4091.9

Brick work with old bricks (supplied free of cost at our stores ) in foundation & plinth in cement mortar 1:6 (1 cement: 6 coarse sand)

Quantity5

Rate19269

Amount 3853.95

Providing and fixing 1mm thick lamination on door of green Lam make or equivalent of approved colour and shade as per direction of the EIC.

Quantity45

Rate57260

Amount 1272.45

Providing and fixing 12 mm thick toughened glass in fixed portion including godrej glass clip fittings or equivalent as per approved make necessary holes etc. for fixing required fitting, all complete as per direction of EIC

Quantity20

Rate119585

Amount 5979.25

Providing and fixing 35 mm thick ISI mark ply flush door shutters non-decorative type of century ply make or equivalent approved make complete in all respects as per directions of EIC

Quantity8

Rate29866

Amount 3733.25

Providing and fixing 32 mm thick ISI mark flush door shutters non-decorative type of centuryply make or equivalent approved make complete in all respects as per directions of EIC

Quantity8

Rate27958

Amount 3494.75

Providing and fixing S.S. Sliding door bolt of 200x16 mm with nuts and screw etc. complete as per direction of EIC

Quantity10

Rate5735

Amount 573.55

Providing and fixing mortice handle lock with of doorset make model no. Cetto

Quantity5

Rate26050

Amount 5210

Providing and fixing hydraulic door closer Godrej make or equivalent approved make with necessary accessories and screws etc. complete in all respects as per directions of EIC

Quantity10

Rate24045

Amount 2404.55

Providing and fixing 10/5 ltr. capacity polymer dual flush cistern of parryware make model E8109 Economy D/F or equivalent approved make as per directions of EIC

Quantity2

Rate4605

Amount 2302.8

Providing and fixing Parryware piller cock auto closing Model No. G2013A1 or equivalent of approved make as per direction of Engineer in charge.

Quantity8

Rate18928

Amount 2366.1

Providing and fixing of white glazed earthenwave half stall (Flat Back Large) urinal 1st quality HINDWARE, CERA, PARRYWARE make of required specials fitting and 32mm dia G.I. waste pipe etc complete in all respects as per directions of E.I.C.

Quantity10

Rate83961

Amount 8396.1

Providing and fixing Urinal valve auto closing system with built- in control cock & Wall Flange Jaquar Make Model No. PRS-077 or equivalent of approved make as per direction of engineer in charge.

Quantity3

Rate9449

Amount 3149.75

Providing and fixing Shower jaquar make model no. OHS-CHR-1709 or equivalent of approved make as per directions of E.I.C.

Quantity4

Rate14708

Amount 3677.2

Providing and fixing Shower Arm jaquar make model no. SHA-CHR-477 or equivalent of approved make as per directions of E.I.C.

Quantity14

Rate12660

Amount 904.35

Providing and fixing Wall hung Urinal division HINDWARE make model no. SU810SC-C-STD-CR or equivalent of approved make as per directions of E.I.C.

Quantity2

Rate13520

Amount 6760.45

Providing and fixing counter top Wash basin MEDIAN model no. 91069 of Hindware make or equivalent of approved make as per directions of E.I.C.

Quantity2

Rate27151

Amount 13575.8

Providing and fixing wash basin size of 630x450 mm with C.I. brackets, 32 mm C.P. brass waste of standard pattern, cutting and making good the walls wherever required as per instruction of EIC.

Quantity2

Rate3139

Amount 1569.6

590 More

Evaluation Notes How It Works ?

Partners

Payment Type

Bank Certification Amount

Bank Guarantee Amount

Additional Info 1

Additional Info 2

Additional Info 3

Additional Info 4

Remarks

Potential Partner

Select Your Requirements

Help me get relevant partners for joint bidding

Help me get relevant material suppliers

Help me get project financing

Indian Institute Of Technology Tender

Indian Institute Of Technology - IIT Tender

Costs

EMD

Document Cost

Tender Fee

Description

Contact

Tender Id

Bid Award Id

Tender No

Tender Authority

Purchaser Address

Website

BOQ Items

Potential Partner

TENDER BY COUNTRIES

United States Tenders|

United Kingdom Tenders|

Spain Tenders|

France Tenders|

Qatar Tenders|

Australia Tenders|

Canada Tenders|

China Tenders|

Malaysia Tenders|

Maldives Tenders|

Singapore Tenders|

Bangladesh Tenders|

Ethiopia Tenders|

Bhutan Tenders|

Kuwait Tenders|

Oman Tenders|

Germany Tenders|

Egypt Tenders|

Ghana Tenders|

Saudi Arabia Tenders

TENDER BY AUTHORITIES

Federal Road Agency Tenders|

Bangladesh Railway Tenders|

Area Metropolitana De Barcelona Tenders|

Jsc Russian Railways Tenders|

Kuwait Oil Company Tenders|

Civil Aviation Authority Tenders|

Food And Agriculture Org. Tenders|

Eskom Tenders|

Energy Regulation Commision Tenders|

Dept Of Defence Tenders

TENDER BY CATEGORIES

Agriculture Or Forestry Works Tenders|

Automobiles And Auto Parts Tenders|

Civil And Construction Tenders|

Consultancy Services Tenders|

Education And Training Services Tenders|

Electrical And Electronics Tenders|

Finance And Insurance Sectors Tenders|

Food Products Tenders|

Furnitures And Fixtures Tenders|

Healthcare And Medicine Tenders

TENDER BY PROCUREMENT

Goods Tenders|

Works Tenders|

Services Tenders

OFG MANUFACTURING BUSINESSES PRIVATE LIMITED

Head Office

Sales Office

COMPANY

About Us

Contact Us

Download Media Kit

POLICIES

Terms of Use

Privacy Policy

SUPPORT

Request Demo

MOBILE APPS