All India Institute Of Medical Sciences Tender

Numbering of Street Tubular Street light pole as reqd. i/c making Circle with red paint as reqd.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

Supplying and fixing of following capacity 6000K LED lumen 100 lm/watt Flood light with IP66 Protection with Lens type full glow luminaries complete with all accessories like electronic driver internal wiring connection with existing light point, body earthing and fixing on existing height not more than 10 meter pole/wall/ceiling with suitable size fastener and clamp 40x3mm etc suitable to operate on 220volts, 50Hz, AC supply i/c connection & testing etc as reqd. and guidelines as per direction of engineer-in-charge.100 Watt AC 220 V 50 Hz

Supplying and fixing of following capacity 6000K LED lumen 100 lm/watt Flood light with IP66 Protection with Lens type full glow luminaries complete with all accessories like electronic driver internal wiring connection with existing light point, body earthing and fixing on existing height not more than 10 meter pole/wall/ceiling with suitable size fastener and clamp 40x3mm etc suitable to operate on 220volts, 50Hz, AC supply i/c connection & testing etc as reqd. and guidelines as per direction of engineer-in-charge. 250 Watt AC 220 V 50 Hz

Supplying and fixing of LED Aviation light fitting with IP66 Protection on Heliport connection with existing light point flexible FRLS PVC insulated, copper conductor cable, body earthing complete with nuts, bolts and washer, painting the flat iron, finish and testing, commissioning etc.as required and guidelines as per direction of engineer-in-charge. 20 Watt AC 220 V 50 Hz

Supplying and fixing of Single Dome Aviation Obstruction LED Light (Red) fitting with IP66 Protection on Heliport connection with existing light point flexible FRLS PVC insulated, copper conductor cable, body earthing complete with nuts, bolts and washer, painting the flat iron, finish and testing, commissioning etc.as required and guidelines as per direction of engineer-in-charge. 10 Watt AC 220 V 50 Hz

Supply, installation, testing and commissioning of Semi flush heliport light connection with existing light point materials complete with testing, commissioning etc.as required following specifications, Make-LOKOZO - Light / LED Color :Red and Green - Power: 20 W. -LED Life Cycles:50000Hrs -Color Rendering Index-70 -Beam Angle:120’ -PF-: 0.9 -THD: 25% -Driver Integrated: Yes -Power Options:230V/AC,50/60Hz -Optical Material :Polycarbonate diffuser/Borosilicate MS/All noncorrosive hardware -Housing:/All noncorrosive hardware -Operating Temp:-20to50’C -Nominal Temp:25’C -IP Rating: IP66 with Silicon Hot Gun, Silicone Sealant GPS Premium Acetoxy Cure (Black, 280ml),Rubber Packaging Round Shape (Thickness 5 mm),40 mm X 3 mm flat iron and 16 mm X 50 mm bolts and nuts with washers finish paint etc. as required and guidelines as per direction of engineer-in-charge.

S/I/T/C/Supply, Installation, testing and commissioning of 10-18 W LED decorative bollard made of aluminium casting with spun aluminium top. The top head should be at least 335mm wide to match the light levels as approved by engineer in charge. Height should be 1100 mm with polycarbonate unbreakable diffuser with mechanical impact protection of IK10 and rated as dust protection as IP66. The fixture should be PU painted and weight of the luminaries should not be less than 10.5Kgs. The efficacy of the LEDs should be greater than 100 lumens per watt and should be powered with at least 3KV surge protection driver. The fixture must have an external surge protection device of 10KV, Input Voltage- AC 240 Volts, Mandatory certifications – BIS for complete product in the name of lighting company. Bollard light of approved make and model approved by engineering in charge.

Supplying Installation testing and commissioning of LED Flood light fitting at height of pole 4 to 10-meter connection with existing light point flexible FRLS PVC insulated, copper conductor cable, body earthing complete with nuts, bolts and washer, painting the flat iron, finish and testing, commissioning etc.as required and guidelines as per direction of engineer-in-charge. 400 Watt AC 220 V 50 Hz

Supplying Installation testing and commissioning of LED Street light fitting 120 W High-efficiency 6000K LED lumen 100 lm/watt IP66 LED flood light with pressure die cast aluminium housing, toughened glass in the front and peanut lens for batwing light distribution, higher spacing between poles and maintenance free system. Connection with existing light point flexible FRLS PVC insulated, copper conductor cable, body earthing complete with nuts, bolts and washer, painting the flat iron, finish and testing, commissioning etc.as required and guidelines as per direction of engineer-in-charge 120 Watt AC 220 V 50 Hz

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.25 mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.4 x 1.5 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 25 sq. mm (28mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 16 sq. mm (28mm)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. Conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. Direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

Supply of following sizes, XLPE insulated and PVC sheathed Al. conductor Armoured 1.1 KV grade power cable confirming to IS: 7098 (Part I). 3 X 6 Sq. mm

Supply of following sizes, XLPE insulated and PVC sheathed Al. conductor Armoured 1.1 KV grade power cable confirming to IS: 7098 (Part I). 3 X 10 Sq. mm

Supply of following sizes, XLPE insulated and PVC sheathed Al. conductor Armoured 1.1 KV grade power cable confirming to IS: 7098 (Part I). 4 X 16 Sq. mm

Supply of following sizes, XLPE insulated and PVC sheathed Al. conductor Armoured 1.1 KV grade power cable confirming to IS: 7098 (Part I). 3.5 X 25 Sq. mm

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/sub main wiring/ cable as required.

Design and Fabrication, Supply, erection, testing and commissioning of outdoor double door type metal clad weather proof branch feeder pillar of suitable size along with cable alley with double door and inbuilt locking arrangement made of 2. mm mild steel sheet to accommodate the following capacity of switch gear including angle iron legs made of 40mm x 40mm x 6 mm, footing height 750 mm for suitable height ,neoprene rubber gaskets, Bakelite knobs ,powder coated rust free Silver painting of approved shade and of approved quality ,making connection ,interconnection with appropriate size of cooper conductor cable with colour coding sleevs,copper thimbling ,end termination glands of suitable size ,earthing connection etc...,complete as required. I/C providing fixing, testing and commissioning of following with CPRI Approved, all as directed by engineering in charge.32 A TPN MCCB.25KA (Each 01) Digital Voltmeter and Ammeter (Set 01) for all phase. SP MCB 10 Amp for Light Circuit Qty (6 nos) with proper input and Output. 4 strip insulated aluminium conductor bus bar 100 amp capacity(set 01). LED indicating lamp RYB (set 01).Automatic switching On & OFF of bollard lights at sun set & sun rise or twilight (Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required. with 32 Amp power contactor

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1.5.10 (1 Cement : 5 coarse sand (Zone -lll) 10 graded stone aggregate 40 mm nominal size)

Brick work in foundation & plinth with modular bricks of class designation 7.5 in foundation and plinth in. Cement mortar 1:6 (1 cement : 6 coarse sand)

12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand)

Design and making of street light pole foundation suitable for installation of 8-10 Mtr. height existing pole with the help of suitable size J Bolt RCC foundation of M-20 Grade Concrete below ground level and upto 600 mm as one ground level. Complete with curing and installation of Pole on the foundation. Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns

Centering and shuttering including strutting, propping etc. and removal of form work for: Columns, piers, abutments, pillars, posts and struts

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level: 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and fixing bolts including nuts and washers complete.

12 mm cement plaster of mix: 1:4 (1 cement: 4 fine sand)